[ 0.000000] Linux version 2.6.22-9-generic (buildd@palmer) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:50:37 GMT 2007 (Ubuntu 2.6.22-9.25-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffe5500 (reserved) [ 0.000000] BIOS-e820: 000000003ffe5500 - 000000003fff6000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff6000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262096 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262096 [ 0.000000] On node 0 totalpages: 262096 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32465 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F7BF0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 3FFE5584, 0040 (r1 HP 309F 22030620 HP 1) [ 0.000000] ACPI: FACP 3FFE5500, 0084 (r2 HP 309F 2 HP 1) [ 0.000000] ACPI: DSDT 3FFE569C, F25A (r1 HP nc9700 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF5E80, 0040 [ 0.000000] ACPI: APIC 3FFE55C4, 0068 (r1 HP 309F 1 HP 1) [ 0.000000] ACPI: MCFG 3FFE562C, 003C (r1 HP 309F 1 HP 1) [ 0.000000] ACPI: TCPA 3FFE5668, 0032 (r2 HP 309F 1 HP 1) [ 0.000000] ACPI: SSDT 3FFF48F6, 0059 (r1 HP HPQNLP 1 MSFT 100000E) [ 0.000000] ACPI: SSDT 3FFF494F, 035C (r1 HP HPQSAT 1 MSFT 100000E) [ 0.000000] ACPI: SSDT 3FFF513C, 04E7 (r1 HP CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 260049 [ 0.000000] Kernel command line: root=UUID=5674a219-9050-48ea-be09-494a8dabccb5 ro quiet splash locale=fr_FR [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1828.899 MHz processor. [ 16.791554] Console: colour VGA+ 80x25 [ 16.791802] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 16.792141] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.820695] Memory: 1028032k/1048384k available (2010k kernel code, 19732k reserved, 917k data, 364k init, 130880k highmem) [ 16.820705] virtual kernel memory layout: [ 16.820706] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 16.820707] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.820708] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 16.820710] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 16.820711] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 16.820712] .data : 0xc02f6806 - 0xc03dbe64 ( 917 kB) [ 16.820713] .text : 0xc0100000 - 0xc02f6806 (2010 kB) [ 16.820717] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.820748] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.900645] Calibrating delay using timer specific routine.. 3661.80 BogoMIPS (lpj=7323612) [ 16.900665] Security Framework v1.0.0 initialized [ 16.900672] SELinux: Disabled at boot. [ 16.900685] Mount-cache hash table entries: 512 [ 16.900790] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 16.900798] monitor/mwait feature present. [ 16.900800] using mwait in idle threads. [ 16.900804] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.900807] CPU: L2 cache: 2048K [ 16.900809] CPU: Physical Processor ID: 0 [ 16.900811] CPU: Processor Core ID: 0 [ 16.900813] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 16.900821] Compat vDSO mapped to ffffe000. [ 16.900832] Checking 'hlt' instruction... OK. [ 16.916713] SMP alternatives: switching to UP code [ 16.917093] Early unpacking initramfs... done [ 17.228913] ACPI: Core revision 20070126 [ 17.229020] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 17.304521] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 17.304538] SMP alternatives: switching to SMP code [ 17.304640] Booting processor 1/1 eip 3000 [ 17.314820] Initializing CPU#1 [ 17.391840] Calibrating delay using timer specific routine.. 3657.81 BogoMIPS (lpj=7315620) [ 17.391846] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 17.391851] monitor/mwait feature present. [ 17.391854] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.391856] CPU: L2 cache: 2048K [ 17.391858] CPU: Physical Processor ID: 0 [ 17.391860] CPU: Processor Core ID: 1 [ 17.391862] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 [ 17.392381] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 17.392405] Total of 2 processors activated (7319.61 BogoMIPS). [ 17.392601] ENABLING IO-APIC IRQs [ 17.392805] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 17.539699] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 17.559680] Brought up 2 CPUs [ 17.789117] migration_cost=44 [ 17.789251] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 17.789254] Booting paravirtualized kernel on bare hardware [ 17.789340] Time: 7:47:49 Date: 07/13/107 [ 17.789361] NET: Registered protocol family 16 [ 17.789441] EISA bus registered [ 17.789445] ACPI: bus type pci registered [ 17.790706] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 [ 17.790708] PCI: Using configuration type 1 [ 17.790710] Setting up standard PCI resources [ 17.792833] ACPI: EC: Look up EC in DSDT [ 17.793803] ACPI: EC: GPE=0x16, ports=0x66, 0x62 [ 17.902287] ACPI: Interpreter enabled [ 17.902291] ACPI: (supports S0 S3 S4 S5) [ 17.902304] ACPI: Using IOAPIC for interrupt routing [ 17.914682] ACPI: EC: GPE=0x16, ports=0x66, 0x62 [ 17.914764] ACPI: PCI Root Bridge [C002] (0000:00) [ 17.914776] PCI: Probing PCI hardware (bus 00) [ 17.915447] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 17.915451] PCI quirk: region 1100-113f claimed by ICH6 GPIO [ 17.916781] PCI: Transparent bridge - 0000:00:1e.0 [ 17.916853] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') [ 17.916856] Please report the result to linux-kernel to fix this permanently [ 17.916928] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] [ 17.917256] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C07D._PRT] [ 17.917362] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C092._PRT] [ 17.917518] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0F9._PRT] [ 17.917657] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C109._PRT] [ 17.917797] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C10F._PRT] [ 17.953392] ACPI: PCI Interrupt Link [C105] (IRQs *10 11) [ 17.953611] ACPI: PCI Interrupt Link [C106] (IRQs *10 11) [ 17.953827] ACPI: PCI Interrupt Link [C107] (IRQs 10 *11) [ 17.954042] ACPI: PCI Interrupt Link [C108] (IRQs 10 11) *5 [ 17.954258] ACPI: PCI Interrupt Link [C121] (IRQs *10 11) [ 17.954473] ACPI: PCI Interrupt Link [C122] (IRQs *10 11) [ 17.954689] ACPI: PCI Interrupt Link [C123] (IRQs 10 *11) [ 17.954792] ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126] [ 17.955140] ACPI: Power Resource [C1F6] (on) [ 17.955196] ACPI: Power Resource [C20C] (on) [ 17.955253] ACPI: Power Resource [C214] (on) [ 17.955369] ACPI: Power Resource [C303] (off) [ 17.955472] ACPI: Power Resource [C304] (off) [ 17.955575] ACPI: Power Resource [C305] (off) [ 17.955677] ACPI: Power Resource [C306] (off) [ 17.955782] ACPI: Power Resource [C307] (off) [ 17.955885] ACPI: Power Resource [C308] (off) [ 17.955989] ACPI: Power Resource [C309] (off) [ 17.956091] ACPI: Power Resource [C30A] (off) [ 17.956194] ACPI: Power Resource [C30B] (off) [ 17.956296] ACPI: Power Resource [C30C] (off) [ 17.956313] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.956326] pnp: PnP ACPI init [ 17.956332] ACPI: bus type pnp registered [ 17.965986] pnp: PnP ACPI: found 14 devices [ 17.965988] ACPI: ACPI bus type pnp unregistered [ 17.965992] PnPBIOS: Disabled by ACPI PNP [ 17.966040] PCI: Using ACPI for IRQ routing [ 17.966042] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.091282] NET: Registered protocol family 8 [ 18.091284] NET: Registered protocol family 20 [ 18.091335] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 18.091339] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 18.091342] pnp: 00:00: iomem range 0x100000-0x3fffffff could not be reserved [ 18.091352] pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved [ 18.091355] pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved [ 18.091360] pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved [ 18.091363] pnp: 00:0c: ioport range 0x1000-0x107f has been reserved [ 18.091366] pnp: 00:0c: ioport range 0x1100-0x113f has been reserved [ 18.091369] pnp: 00:0c: ioport range 0x1200-0x121f has been reserved [ 18.091372] pnp: 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved [ 18.091375] pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved [ 18.091378] pnp: 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 18.091381] pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 18.091386] pnp: 00:0d: iomem range 0xcfe00-0xcffff has been reserved [ 18.091389] pnp: 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved [ 18.091392] pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 18.094701] Time: tsc clocksource has been installed. [ 18.121641] PCI: Bridge: 0000:00:01.0 [ 18.121644] IO window: 3000-3fff [ 18.121648] MEM window: d2600000-d26fffff [ 18.121651] PREFETCH window: c0000000-cfffffff [ 18.121654] PCI: Bridge: 0000:00:1c.0 [ 18.121656] IO window: disabled. [ 18.121662] MEM window: d2100000-d21fffff [ 18.121666] PREFETCH window: disabled. [ 18.121671] PCI: Bridge: 0000:00:1c.1 [ 18.121673] IO window: disabled. [ 18.121679] MEM window: d2000000-d20fffff [ 18.121683] PREFETCH window: disabled. [ 18.121689] PCI: Bridge: 0000:00:1c.3 [ 18.121692] IO window: 2000-2fff [ 18.121698] MEM window: d0000000-d1ffffff [ 18.121702] PREFETCH window: disabled. [ 18.121710] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [ 18.121712] IO window: 00005000-000050ff [ 18.121717] IO window: 00005400-000054ff [ 18.121723] PREFETCH window: 50000000-53ffffff [ 18.121729] MEM window: 54000000-57ffffff [ 18.121734] PCI: Bridge: 0000:00:1e.0 [ 18.121737] IO window: 5000-5fff [ 18.121743] MEM window: d2200000-d25fffff [ 18.121748] PREFETCH window: 50000000-53ffffff [ 18.121763] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.121768] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 18.121790] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.121796] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.121819] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.121825] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.121848] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 18.121854] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 18.121868] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.121886] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 18.121901] NET: Registered protocol family 2 [ 18.158711] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 18.158774] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 18.159755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 18.160119] TCP: Hash tables configured (established 131072 bind 65536) [ 18.160122] TCP reno registered [ 18.170801] checking if image is initramfs... it is [ 18.621850] Switched to high resolution mode on CPU 0 [ 18.621921] Switched to high resolution mode on CPU 1 [ 18.783402] Freeing initrd memory: 6833k freed [ 18.783936] audit: initializing netlink socket (disabled) [ 18.783949] audit(1186991269.588:1): initialized [ 18.784043] highmem bounce pool size: 64 pages [ 18.785831] VFS: Disk quotas dquot_6.5.1 [ 18.785880] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 18.785962] io scheduler noop registered [ 18.785965] io scheduler anticipatory registered [ 18.785967] io scheduler deadline registered [ 18.785980] io scheduler cfq registered (default) [ 18.786079] Boot video device is 0000:01:00.0 [ 18.786159] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 18.786192] assign_interrupt_mode Found MSI capability [ 18.786221] Allocate Port Service[0000:00:01.0:pcie00] [ 18.786293] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.786349] assign_interrupt_mode Found MSI capability [ 18.786394] Allocate Port Service[0000:00:1c.0:pcie00] [ 18.786423] Allocate Port Service[0000:00:1c.0:pcie02] [ 18.786519] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.786574] assign_interrupt_mode Found MSI capability [ 18.786619] Allocate Port Service[0000:00:1c.1:pcie00] [ 18.786649] Allocate Port Service[0000:00:1c.1:pcie02] [ 18.786742] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 18.786798] assign_interrupt_mode Found MSI capability [ 18.786842] Allocate Port Service[0000:00:1c.3:pcie00] [ 18.786873] Allocate Port Service[0000:00:1c.3:pcie02] [ 18.787058] isapnp: Scanning for PnP cards... [ 19.141212] isapnp: No Plug & Play device found [ 19.161858] Real Time Clock Driver v1.12ac [ 19.162006] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.163032] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.163227] input: Macintosh mouse button emulation as /class/input/input0 [ 19.163314] PNP: PS/2 Controller [PNP0303:C209,PNP0f13:C20A] at 0x60,0x64 irq 1,12 [ 19.165501] i8042.c: Detected active multiplexing controller, rev 1.1. [ 19.166305] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.166310] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 19.166313] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 19.166316] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 19.166319] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 19.166427] mice: PS/2 mouse device common for all mice [ 19.166551] EISA: Probing bus 0 at eisa.0 [ 19.166559] Cannot allocate resource for EISA slot 1 [ 19.166562] Cannot allocate resource for EISA slot 2 [ 19.166564] Cannot allocate resource for EISA slot 3 [ 19.166566] Cannot allocate resource for EISA slot 4 [ 19.166569] Cannot allocate resource for EISA slot 5 [ 19.166584] EISA: Detected 0 cards. [ 19.166758] TCP cubic registered [ 19.166773] NET: Registered protocol family 1 [ 19.166794] Using IPI No-Shortcut mode [ 19.166953] Magic number: 3:963:773 [ 19.167064] hash matches device ptyp9 [ 19.167280] Freeing unused kernel memory: 364k freed [ 19.194376] input: AT Translated Set 2 keyboard as /class/input/input1 [ 20.337831] Capability LSM initialized [ 20.341208] ACPI: Transitioning device [C30D] to D3 [ 20.341210] ACPI: Transitioning device [C30D] to D3 [ 20.341214] ACPI: Fan [C30D] (off) [ 20.341414] ACPI: Transitioning device [C30E] to D3 [ 20.341416] ACPI: Transitioning device [C30E] to D3 [ 20.341419] ACPI: Fan [C30E] (off) [ 20.341616] ACPI: Transitioning device [C30F] to D3 [ 20.341618] ACPI: Transitioning device [C30F] to D3 [ 20.341621] ACPI: Fan [C30F] (off) [ 20.341818] ACPI: Transitioning device [C310] to D3 [ 20.341820] ACPI: Transitioning device [C310] to D3 [ 20.341823] ACPI: Fan [C310] (off) [ 20.342020] ACPI: Transitioning device [C311] to D3 [ 20.342022] ACPI: Transitioning device [C311] to D3 [ 20.342025] ACPI: Fan [C311] (off) [ 20.342222] ACPI: Transitioning device [C312] to D3 [ 20.342224] ACPI: Transitioning device [C312] to D3 [ 20.342226] ACPI: Fan [C312] (off) [ 20.342424] ACPI: Transitioning device [C313] to D3 [ 20.342426] ACPI: Transitioning device [C313] to D3 [ 20.342428] ACPI: Fan [C313] (off) [ 20.342625] ACPI: Transitioning device [C314] to D3 [ 20.342627] ACPI: Transitioning device [C314] to D3 [ 20.342630] ACPI: Fan [C314] (off) [ 20.342827] ACPI: Transitioning device [C315] to D3 [ 20.342829] ACPI: Transitioning device [C315] to D3 [ 20.342832] ACPI: Fan [C315] (off) [ 20.343041] ACPI: Transitioning device [C316] to D3 [ 20.343043] ACPI: Transitioning device [C316] to D3 [ 20.343046] ACPI: Fan [C316] (off) [ 20.347218] ACPI: SSDT 3FFF4D34, 01A8 (r1 HP Cpu0Ist 3000 INTL 20050624) [ 20.347446] ACPI: SSDT 3FFF4F61, 01DB (r1 HP Cpu0Cst 3001 INTL 20050624) [ 20.347929] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 20.347935] ACPI: Processor [CPU0] (supports 8 throttling states) [ 20.348133] ACPI: SSDT 3FFF4CAB, 0089 (r1 HP Cpu1Ist 3000 INTL 20050624) [ 20.348345] ACPI: SSDT 3FFF4EDC, 0085 (r1 HP Cpu1Cst 3000 INTL 20050624) [ 20.348843] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 20.348848] ACPI: Processor [CPU1] (supports 8 throttling states) [ 20.352005] ACPI: Thermal Zone [TZ0] (32 C) [ 20.366249] ACPI: Thermal Zone [TZ1] (35 C) [ 3.368000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.372000] Time: acpi_pm clocksource has been installed. [ 3.376000] ACPI: Thermal Zone [TZ2] (34 C) [ 3.392000] ACPI: Thermal Zone [TZ3] (25 C) [ 3.400000] ACPI: Thermal Zone [TZ4] (23 C) [ 3.404000] ACPI: Thermal Zone [TZ5] (65 C) [ 3.824000] usbcore: registered new interface driver usbfs [ 3.824000] usbcore: registered new interface driver hub [ 3.824000] usbcore: registered new device driver usb [ 3.824000] USB Universal Host Controller Interface driver v3.0 [ 3.824000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 3.824000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.824000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.824000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.824000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004000 [ 3.824000] usb usb1: configuration #1 chosen from 1 choice [ 3.824000] hub 1-0:1.0: USB hub found [ 3.824000] hub 1-0:1.0: 2 ports detected [ 3.852000] SCSI subsystem initialized [ 3.856000] libata version 2.21 loaded. [ 3.928000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 21 [ 3.928000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.928000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.928000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.928000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004020 [ 3.928000] usb usb2: configuration #1 chosen from 1 choice [ 3.928000] hub 2-0:1.0: USB hub found [ 3.928000] hub 2-0:1.0: 2 ports detected [ 4.032000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 4.032000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4.032000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.032000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 4.032000] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004040 [ 4.032000] usb usb3: configuration #1 chosen from 1 choice [ 4.032000] hub 3-0:1.0: USB hub found [ 4.032000] hub 3-0:1.0: 2 ports detected [ 4.112000] Clocksource tsc unstable (delta = -97024930 ns) [ 4.136000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 4.136000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 4.136000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.136000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 4.136000] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004060 [ 4.136000] usb usb4: configuration #1 chosen from 1 choice [ 4.136000] hub 4-0:1.0: USB hub found [ 4.136000] hub 4-0:1.0: 2 ports detected [ 4.240000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.240000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.240000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.240000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.240000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.240000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.240000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd2704000 [ 4.244000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.244000] usb usb5: configuration #1 chosen from 1 choice [ 4.244000] hub 5-0:1.0: USB hub found [ 4.244000] hub 5-0:1.0: 8 ports detected [ 4.348000] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 4.396000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[d2201000-d22017ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.396000] ata_piix 0000:00:1f.1: version 2.11 [ 4.396000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.396000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4.396000] scsi0 : ata_piix [ 4.396000] scsi1 : ata_piix [ 4.396000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014080 irq 14 [ 4.396000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014088 irq 15 [ 4.716000] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4082N, CQ04, max MWDMA2 [ 4.888000] ata1.00: configured for MWDMA2 [ 4.888000] ata2: port disabled. ignoring. [ 4.892000] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4082N CQ04 PQ: 0 ANSI: 5 [ 4.892000] ahci 0000:00:1f.2: version 2.2 [ 4.892000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 22 [ 4.916000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.916000] Uniform CD-ROM driver Revision: 3.20 [ 4.916000] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 4.920000] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 5.668000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f99297d130c] [ 5.896000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 5.896000] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 5.896000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.896000] scsi2 : ahci [ 5.896000] scsi3 : ahci [ 5.896000] scsi4 : ahci [ 5.896000] scsi5 : ahci [ 5.896000] ata3: SATA max UDMA/133 cmd 0xf882c100 ctl 0x00000000 bmdma 0x00000000 irq 219 [ 5.896000] ata4: SATA max UDMA/133 cmd 0xf882c180 ctl 0x00000000 bmdma 0x00000000 irq 219 [ 5.896000] ata5: SATA max UDMA/133 cmd 0xf882c200 ctl 0x00000000 bmdma 0x00000000 irq 219 [ 5.896000] ata6: SATA max UDMA/133 cmd 0xf882c280 ctl 0x00000000 bmdma 0x00000000 irq 219 [ 6.380000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.380000] ata3.00: ATA-7: HTS541010G9SA00, MBZOC60P, max UDMA/100 [ 6.380000] ata3.00: 195371568 sectors, multi 16: LBA48 [ 6.380000] ata3.00: configured for UDMA/100 [ 6.692000] ata4: SATA link down (SStatus 0 SControl 0) [ 7.004000] ata5: SATA link down (SStatus 0 SControl 0) [ 7.316000] ata6: SATA link down (SStatus 0 SControl 0) [ 7.316000] scsi 2:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZO PQ: 0 ANSI: 5 [ 7.316000] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.316000] tg3.c:v3.77 (May 31, 2007) [ 7.316000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.316000] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 7.320000] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 7.320000] sd 2:0:0:0: [sda] Write Protect is off [ 7.320000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.320000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.320000] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 7.320000] sd 2:0:0:0: [sda] Write Protect is off [ 7.320000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.320000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.320000] sda:<6>eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:06:c7:a8 [ 7.360000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 7.360000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 7.680000] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 7.740000] sd 2:0:0:0: [sda] Attached SCSI disk [ 8.172000] Attempting manual resume [ 8.172000] swsusp: Resume From Partition 8:3 [ 8.172000] PM: Checking swsusp image. [ 8.172000] PM: Resume from disk failed. [ 8.200000] kjournald starting. Commit interval 5 seconds [ 8.200000] EXT3-fs: mounted filesystem with ordered data mode. [ 20.656000] PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100406, writing 100006) [ 21.816000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.896000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.948000] Linux agpgart interface v0.102 (c) Dave Jones [ 22.072000] iTCO_vendor_support: vendor-support=0 [ 22.084000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 22.084000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 22.084000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.300000] input: PC Speaker as /class/input/input2 [ 22.472000] intel_rng: FWH not detected [ 22.524000] NET: Registered protocol family 17 [ 22.532000] ieee80211_crypt: registered algorithm 'NULL' [ 22.592000] tpm_inf_pnp 00:03: Found C1F8 with ID IFX0102 [ 22.592000] tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 22.616000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 [ 22.616000] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 22.656000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 22.656000] parport_pc 00:02: reported by Plug and Play ACPI [ 22.656000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 22.680000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 22.680000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 22.916000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 22.916000] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes. [ 22.916000] [fglrx] USWC is disabled in module parameters [ 22.916000] [fglrx] PAT is disabled! [ 22.916000] [fglrx] module loaded - fglrx 8.39.4 [Jul 20 2007] on minor 0 [ 22.928000] ACPI: PCI Interrupt 0000:02:06.2[A] -> GSI 18 (level, low) -> IRQ 19 [ 22.988000] Yenta: CardBus bridge found at 0000:02:06.0 [103c:309f] [ 22.988000] Yenta: Enabling burst memory read transactions [ 22.988000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 22.988000] Yenta: Routing CardBus interrupts to PCI [ 22.988000] Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64 [ 23.020000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.1mp [ 23.020000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 23.032000] sdhci: Secure Digital Host Controller Interface driver [ 23.032000] sdhci: Copyright(c) Pierre Ossman [ 23.220000] Yenta: ISA IRQ mask 0x0c78, PCI irq 19 [ 23.220000] Socket status: 30000006 [ 23.220000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 23.220000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 23.220000] cs: IO port probe 0x5000-0x5fff: clean. [ 23.220000] pcmcia: parent PCI bridge Memory window: 0xd2200000 - 0xd25fffff [ 23.220000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 23.220000] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 23.220000] PCI: Setting latency timer of device 0000:10:00.0 to 64 [ 23.220000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 23.344000] sdhci: SDHCI controller found at 0000:02:06.3 [104c:803c] (rev 0) [ 23.344000] ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 21 [ 23.344000] mmc0: SDHCI at 0xd2209000 irq 21 PIO [ 23.376000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.376000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 23.640000] cs: IO port probe 0x100-0x3af: clean. [ 23.644000] cs: IO port probe 0x3e0-0x4ff: clean. [ 23.644000] cs: IO port probe 0x820-0x8ff: clean. [ 23.644000] cs: IO port probe 0xc00-0xcf7: clean. [ 23.644000] cs: IO port probe 0xa00-0xaff: clean. [ 24.312000] fuse init (API version 7.8) [ 24.348000] lp0: using parport0 (interrupt-driven). [ 24.412000] Adding 1076344k swap on /dev/sda3. Priority:-1 extents:1 across:1076344k [ 24.888000] EXT3 FS on sda2, internal journal [ 25.180000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 35.120000] No dock devices found. [ 35.192000] ACPI: Video Device [C12C] (multi-head: yes rom: no post: no) [ 35.256000] ACPI: Battery Slot [C1B5] (battery present) [ 35.256000] ACPI: Battery Slot [C1B4] (battery absent) [ 35.312000] input: Power Button (FF) as /class/input/input4 [ 35.312000] ACPI: Power Button (FF) [PWRF] [ 35.312000] input: Sleep Button (CM) as /class/input/input5 [ 35.312000] ACPI: Sleep Button (CM) [C237] [ 35.312000] input: Lid Switch as /class/input/input6 [ 35.312000] ACPI: Lid Switch [C22F] [ 35.328000] ACPI: AC Adapter [C1B3] (off-line) [ 38.472000] NET: Registered protocol family 10 [ 38.472000] lo: Disabled Privacy Extensions [ 38.472000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.472000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 38.704000] apm: BIOS not found. [ 40.724000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 42.288000] [fglrx] total GART = 130023424 [ 42.288000] [fglrx] free GART = 114032640 [ 42.288000] [fglrx] max single GART = 114032640 [ 42.288000] [fglrx] total LFB = 268304384 [ 42.288000] [fglrx] free LFB = 223649792 [ 42.288000] [fglrx] max single LFB = 223649792 [ 42.288000] [fglrx] total Inv = 0 [ 42.288000] [fglrx] free Inv = 0 [ 42.288000] [fglrx] max single Inv = 0 [ 42.288000] [fglrx] total TIM = 0 [ 95.584000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 96.368000] ieee80211_crypt: registered algorithm 'CCMP' [ 97.336000] ieee80211_crypt: registered algorithm 'TKIP' [ 115.420000] eth1: no IPv6 routers present