[ 0.000000] Linux version 2.6.22-14-386 (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Sun Oct 14 22:36:54 GMT 2007 (Ubuntu 2.6.22-14.46-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FA8C0 checksum 0 [ 0.000000] ACPI: RSDP 000FA8C0, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 3FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97) [ 0.000000] ACPI: FACP 3FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97) [ 0.000000] ACPI: DSDT 3FFF0120, 3502 (r1 VIA K7VT4 1000 MSFT 100000D) [ 0.000000] ACPI: FACS 3FFF8000, 0040 [ 0.000000] ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=757151d6-7b77-47c8-98e1-2f43ed5cc5dd ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1999.500 MHz processor. [ 26.535413] Console: colour VGA+ 80x25 [ 26.536274] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 26.537702] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 26.569226] Memory: 1027376k/1048512k available (1929k kernel code, 20364k reserved, 877k data, 348k init, 131008k highmem) [ 26.569237] virtual kernel memory layout: [ 26.569239] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) [ 26.569240] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 26.569241] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 26.569242] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 26.569244] .init : 0xc03c0000 - 0xc0417000 ( 348 kB) [ 26.569245] .data : 0xc02e25d5 - 0xc03bda04 ( 877 kB) [ 26.569246] .text : 0xc0100000 - 0xc02e25d5 (1929 kB) [ 26.569250] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 26.569322] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 26.649330] Calibrating delay using timer specific routine.. 4003.27 BogoMIPS (lpj=8006554) [ 26.649372] Security Framework v1.0.0 initialized [ 26.649383] SELinux: Disabled at boot. [ 26.649391] Mount-cache hash table entries: 512 [ 26.649553] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 [ 26.649562] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 26.649566] CPU: L2 Cache: 256K (64 bytes/line) [ 26.649569] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 [ 26.649582] Compat vDSO mapped to ffffe000. [ 26.649597] CPU: AMD Sempron(tm) 2800+ stepping 00 [ 26.649603] Checking 'hlt' instruction... OK. [ 26.666108] Early unpacking initramfs... done [ 27.008940] ACPI: Core revision 20070126 [ 27.009039] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.011598] ENABLING IO-APIC IRQs [ 27.011923] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 27.157303] Booting paravirtualized kernel on bare hardware [ 27.157401] Time: 20:34:55 Date: 09/23/107 [ 27.157434] NET: Registered protocol family 16 [ 27.157544] EISA bus registered [ 27.157562] ACPI: bus type pci registered [ 27.160673] PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1 [ 27.160676] PCI: Using configuration type 1 [ 27.160678] Setting up standard PCI resources [ 27.164350] ACPI: EC: Look up EC in DSDT [ 27.168397] ACPI: Interpreter enabled [ 27.168400] ACPI: (supports S0 S1 S4 S5) [ 27.168415] ACPI: Using IOAPIC for interrupt routing [ 27.173387] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.173396] PCI: Probing PCI hardware (bus 00) [ 27.174082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.186858] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) [ 27.186969] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) [ 27.187070] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) [ 27.187171] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12 14 15) [ 27.187271] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 27.187372] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 27.187473] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 27.187573] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 27.187689] ACPI: Power Resource [URP1] (off) [ 27.187727] ACPI: Power Resource [URP2] (off) [ 27.187763] ACPI: Power Resource [FDDP] (off) [ 27.187800] ACPI: Power Resource [LPTP] (off) [ 27.187812] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.187825] pnp: PnP ACPI init [ 27.187834] ACPI: bus type pnp registered [ 27.190824] pnp: PnP ACPI: found 13 devices [ 27.190827] ACPI: ACPI bus type pnp unregistered [ 27.190832] PnPBIOS: Disabled by ACPI PNP [ 27.190898] PCI: Using ACPI for IRQ routing [ 27.190902] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.193290] NET: Registered protocol family 8 [ 27.193293] NET: Registered protocol family 20 [ 27.193367] pnp: 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 27.193370] pnp: 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved [ 27.197203] Time: tsc clocksource has been installed. [ 27.223663] PCI: Bridge: 0000:00:01.0 [ 27.223666] IO window: a000-afff [ 27.223671] MEM window: dfe00000-dfefffff [ 27.223675] PREFETCH window: bfd00000-dfcfffff [ 27.223692] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 27.223704] NET: Registered protocol family 2 [ 27.261214] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 27.261446] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.263480] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 27.264016] TCP: Hash tables configured (established 131072 bind 65536) [ 27.264020] TCP reno registered [ 27.273347] checking if image is initramfs... it is [ 27.725087] Switched to high resolution mode on CPU 0 [ 27.921035] Freeing initrd memory: 7810k freed [ 27.921466] audit: initializing netlink socket (disabled) [ 27.921485] audit(1193171695.244:1): initialized [ 27.921551] highmem bounce pool size: 64 pages [ 27.923395] VFS: Disk quotas dquot_6.5.1 [ 27.923413] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 27.923522] io scheduler noop registered [ 27.923524] io scheduler anticipatory registered [ 27.923527] io scheduler deadline registered [ 27.923540] io scheduler cfq registered (default) [ 27.923553] PCI: VIA PCI bridge detected. Disabling DAC. [ 27.923616] PCI: Bypassing VIA 8237 APIC De-Assert Message [ 27.923624] Boot video device is 0000:01:00.0 [ 27.923800] isapnp: Scanning for PnP cards... [ 28.277405] isapnp: No Plug & Play device found [ 28.300352] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.300444] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.301180] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.301995] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.302205] input: Macintosh mouse button emulation as /class/input/input0 [ 28.302289] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 28.303520] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.303526] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 28.303741] mice: PS/2 mouse device common for all mice [ 28.303860] EISA: Probing bus 0 at eisa.0 [ 28.303897] EISA: Detected 0 cards. [ 28.304019] TCP cubic registered [ 28.304028] NET: Registered protocol family 1 [ 28.304051] Using IPI Shortcut mode [ 28.304242] Magic number: 11:903:599 [ 28.304248] hash matches device serial8250 [ 28.304343] hash matches device ptyd3 [ 28.304974] Freeing unused kernel memory: 348k freed [ 28.344892] input: AT Translated Set 2 keyboard as /class/input/input1 [ 29.518789] AppArmor: AppArmor initialized<5>audit(1193171696.840:2): type=1505 info="AppArmor initialized" pid=1185 [ 29.527860] fuse init (API version 7.8) [ 29.534121] Failure registering capabilities with primary security module. [ 29.570021] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 29.587027] md: linear personality registered for level -1 [ 29.591875] md: multipath personality registered for level -4 [ 29.596683] md: raid0 personality registered for level 0 [ 29.601881] md: raid1 personality registered for level 1 [ 29.606573] raid5: automatically using best checksumming function: pIII_sse [ 29.624430] pIII_sse : 2777.000 MB/sec [ 29.624433] raid5: using function: pIII_sse (2777.000 MB/sec) [ 29.692456] raid6: int32x1 772 MB/s [ 29.760459] raid6: int32x2 874 MB/s [ 29.828377] raid6: int32x4 745 MB/s [ 29.896370] raid6: int32x8 502 MB/s [ 29.964328] raid6: mmxx1 1623 MB/s [ 30.032324] raid6: mmxx2 2782 MB/s [ 30.100323] raid6: sse1x1 1515 MB/s [ 30.168278] raid6: sse1x2 2590 MB/s [ 30.168281] raid6: using algorithm sse1x2 (2590 MB/s) [ 30.168285] md: raid6 personality registered for level 6 [ 30.168286] md: raid5 personality registered for level 5 [ 30.168288] md: raid4 personality registered for level 4 [ 30.193554] md: raid10 personality registered for level 10 [ 30.763644] SCSI subsystem initialized [ 30.768854] libata version 2.21 loaded. [ 30.770173] sata_via 0000:00:0f.0: version 2.2 [ 30.770206] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16 [ 30.770278] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 30.770432] scsi0 : sata_via [ 30.770485] scsi1 : sata_via [ 30.770518] ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e802 bmdma 0x0001dc00 irq 16 [ 30.770521] ata2: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e002 bmdma 0x0001dc08 irq 16 [ 30.778916] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 30.778923] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 30.818537] usbcore: registered new interface driver usbfs [ 30.818567] usbcore: registered new interface driver hub [ 30.818593] usbcore: registered new device driver usb [ 30.819494] USB Universal Host Controller Interface driver v3.0 [ 30.908770] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 30.940863] Floppy drive(s): fd0 is 1.44M [ 30.972032] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 31.039231] FDC 0 is a post-1991 82077 [ 31.183958] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 31.194634] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 31.194658] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16 [ 31.194673] VP_IDE: chipset revision 6 [ 31.194675] VP_IDE: not 100% native mode: will probe irqs later [ 31.194686] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 31.194695] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [ 31.194709] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 31.194717] Probing IDE interface ide0... [ 31.607918] hda: SAMSUNG SP1614N, ATA DISK drive [ 32.279779] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 32.290703] Probing IDE interface ide1... [ 33.155450] hdc: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive [ 33.435368] hdd: Maxtor 6L200P0, ATA DISK drive [ 33.494838] ide1 at 0x170-0x177,0x376 on irq 15 [ 33.521214] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17 [ 33.521234] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 33.521704] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 33.521742] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000c800 [ 33.522271] usb usb1: configuration #1 chosen from 1 choice [ 33.522403] hub 1-0:1.0: USB hub found [ 33.522415] hub 1-0:1.0: 2 ports detected [ 33.529883] hda: max request size: 512KiB [ 33.544391] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) [ 33.544796] hda: cache flushes supported [ 33.544855] hda: hda1 hda2 < hda5 > hda3 hda4 [ 33.615582] hdd: max request size: 512KiB [ 33.617091] hdd: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133) [ 33.618642] hdd: cache flushes supported [ 33.618675] hdd:<6>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17 [ 33.623375] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 33.623402] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 33.623425] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000cc00 [ 33.623543] usb usb2: configuration #1 chosen from 1 choice [ 33.623570] hub 2-0:1.0: USB hub found [ 33.623580] hub 2-0:1.0: 2 ports detected [ 33.624395] hdd1 [ 33.639269] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) [ 33.639283] Uniform CD-ROM driver Revision: 3.20 [ 33.727346] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17 [ 33.727363] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 33.727399] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 33.727425] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000d000 [ 33.727548] usb usb3: configuration #1 chosen from 1 choice [ 33.727576] hub 3-0:1.0: USB hub found [ 33.727587] hub 3-0:1.0: 2 ports detected [ 33.831297] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17 [ 33.831314] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 33.831342] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 33.831368] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d400 [ 33.831505] usb usb4: configuration #1 chosen from 1 choice [ 33.831533] hub 4-0:1.0: USB hub found [ 33.831543] hub 4-0:1.0: 2 ports detected [ 33.935416] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17 [ 33.935434] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 33.935466] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 33.935518] ehci_hcd 0000:00:10.4: irq 17, io mem 0xdfffbe00 [ 33.991139] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 33.991160] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.991313] usb usb5: configuration #1 chosen from 1 choice [ 33.991350] hub 5-0:1.0: USB hub found [ 33.991363] hub 5-0:1.0: 8 ports detected [ 34.042203] kjournald starting. Commit interval 5 seconds [ 34.042217] EXT3-fs: mounted filesystem with ordered data mode. [ 34.095363] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 34.095465] eth0: VIA Rhine II at 0x1c000, 00:0b:6a:8c:57:61, IRQ 18. [ 34.096178] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. [ 35.966492] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 36.143388] usb 3-1: configuration #1 chosen from 1 choice [ 36.382366] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 36.536193] usb 3-2: configuration #1 chosen from 1 choice [ 36.778241] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 36.926211] usb 1-2: configuration #1 chosen from 1 choice [ 37.166122] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 37.344749] usb 2-1: configuration #1 chosen from 1 choice [ 47.697870] Linux agpgart interface v0.102 (c) Dave Jones [ 47.798199] agpgart: Detected VIA KT400/KT400A/KT600 chipset [ 47.802209] agpgart: AGP aperture is 64M @ 0xe0000000 [ 47.805817] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 47.816638] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 48.916964] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1093 [ 48.920957] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x06BC pid 0x000B [ 48.920984] usbcore: registered new interface driver usblp [ 48.920988] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 48.943020] usbcore: registered new interface driver usbserial [ 48.943050] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 48.943093] usbcore: registered new interface driver usbserial_generic [ 48.943096] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 48.952595] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for KOBIL USB smart card terminal [ 48.952642] kobil 2-1:1.0: KOBIL USB smart card terminal converter detected [ 48.952650] KOBIL B1 PRO / KAAN PRO detected [ 48.952972] usb 2-1: KOBIL USB smart card terminal converter now attached to ttyUSB0 [ 48.952982] usbcore: registered new interface driver kobil [ 48.952986] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/kobil_sct.c: 21/05/2004 KOBIL Systems GmbH - http://www.kobil.com [ 48.952989] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/kobil_sct.c: KOBIL USB Smart Card Terminal Driver (experimental) [ 49.014894] parport_pc 00:03: reported by Plug and Play ACPI [ 49.014995] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 49.033512] Real Time Clock Driver v1.12ac [ 49.133952] input: PC Speaker as /class/input/input2 [ 49.791636] input: ImPS/2 Generic Wheel Mouse as /class/input/input3 [ 50.057480] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19 [ 50.057626] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 51.079987] Intel ISA PCIC probe: not found. [ 51.158446] lp0: using parport0 (interrupt-driven). [ 51.315672] Adding 1469936k swap on /dev/hda4. Priority:-1 extents:1 across:1469936k [ 51.658469] EXT3 FS on hda3, internal journal [ 52.478402] kjournald starting. Commit interval 5 seconds [ 52.485546] EXT3 FS on hdd1, internal journal [ 52.485552] EXT3-fs: mounted filesystem with ordered data mode. [ 53.625371] No dock devices found. [ 53.706493] input: Power Button (FF) as /class/input/input4 [ 53.712021] ACPI: Power Button (FF) [PWRF] [ 53.754353] input: Power Button (CM) as /class/input/input5 [ 53.759817] ACPI: Power Button (CM) [PWRB] [ 53.801807] input: Sleep Button (CM) as /class/input/input6 [ 53.807221] ACPI: Sleep Button (CM) [SLPB] [ 55.863067] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 56.185750] NET: Registered protocol family 10 [ 56.185929] lo: Disabled Privacy Extensions [ 56.605405] ppdev: user-space parallel port driver [ 57.123785] audit(1193164525.154:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4808 profile="/usr/sbin/cupsd" [ 57.703229] apm: BIOS not found. [ 58.308450] audit(1193164526.342:4): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=5024 profile="/usr/sbin/cupsd" [ 58.393677] audit(1193164526.426:5): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=5039 profile="/usr/sbin/cupsd" [ 64.666485] Failure registering capabilities with primary security module. [ 65.340628] Bluetooth: Core ver 2.11 [ 65.340769] NET: Registered protocol family 31 [ 65.340772] Bluetooth: HCI device and connection manager initialized [ 65.340776] Bluetooth: HCI socket layer initialized [ 65.397330] Bluetooth: L2CAP ver 2.8 [ 65.397337] Bluetooth: L2CAP socket layer initialized [ 65.467478] Bluetooth: RFCOMM socket layer initialized [ 65.467583] Bluetooth: RFCOMM TTY layer initialized [ 65.467585] Bluetooth: RFCOMM ver 1.8 [ 65.614359] [drm] Initialized drm 1.1.0 20060810 [ 65.804101] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 65.807718] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 68.006109] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 68.006226] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 68.006350] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 68.285936] [drm] Setting GART location based on new memory map [ 68.285948] [drm] Loading R300 Microcode [ 68.285989] [drm] writeback test succeeded in 1 usecs [ 69.409889] NET: Registered protocol family 17 [ 83.997457] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp1: off-line