[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 0000000077d88400 end: 0000000077e88400 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 0000000077e88400 size: 0000000008177c00 end: 0000000080000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000f8000000 size: 0000000004000000 end: 00000000fc000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077e88400 (usable) [ 0.000000] BIOS-e820: 0000000077e88400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 1022MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 491144) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 491144 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 491144 [ 0.000000] On node 0 totalpages: 491144 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2045 pages used for memmap [ 0.000000] HighMem zone: 259723 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v002 DELL ) @ 0x000fbfd0 [ 0.000000] ACPI: XSDT (v001 DELL M08 0x27d70510 ASL 0x00000061) @ 0x77e89e00 [ 0.000000] ACPI: FADT (v004 DELL M08 0x27d70510 ASL 0x00000061) @ 0x77e89c9c [ 0.000000] ACPI: HPET (v001 DELL M08 0x00000001 ASL 0x00000061) @ 0x77e89f00 [ 0.000000] ACPI: MADT (v001 DELL M08 0x27d70510 ASL 0x00000047) @ 0x77e8a000 [ 0.000000] ACPI: MCFG (v016 DELL M08 0x27d70510 ASL 0x00000061) @ 0x77e89fc0 [ 0.000000] ACPI: SLIC (v001 DELL M08 0x27d70510 ASL 0x00000061) @ 0x77e8a09c [ 0.000000] ACPI: SSDT (v001 DELL M08 0x20000ce7 ASL 0x00000061) @ 0x77e99000 [ 0.000000] ACPI: BOOT (v001 DELL M08 0x27d70510 ASL 0x00000061) @ 0x77e89bc0 [ 0.000000] ACPI: DSDT (v002 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000 [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) [ 0.000000] Detected 1795.680 MHz processor. [ 9.656271] Built 1 zonelists. Total pages: 487307 [ 9.656274] Kernel command line: root=UUID=2ef941ee-bd81-4869-9ff9-e2b60bd3c613 ro quiet splash [ 9.656412] mapped APIC to ffffd000 (fee00000) [ 9.656415] mapped IOAPIC to ffffc000 (fec00000) [ 9.656418] Enabling fast FPU save and restore... done. [ 9.656420] Enabling unmasked SIMD FPU exception support... done. [ 9.656427] Initializing CPU#0 [ 9.656476] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 9.657226] Console: colour VGA+ 80x25 [ 9.657532] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 9.657892] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 9.714986] Memory: 1936732k/1964576k available (1992k kernel code, 26672k reserved, 900k data, 328k init, 1047072k highmem) [ 9.714997] virtual kernel memory layout: [ 9.714998] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 9.714999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 9.715001] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 9.715002] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 9.715003] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 9.715004] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB) [ 9.715006] .text : 0xc0100000 - 0xc02f2374 (1992 kB) [ 9.715009] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.715150] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 9.715155] hpet0: 4 32-bit timers, 14318180 Hz [ 9.716161] Using HPET for base-timer [ 9.795107] Calibrating delay using timer specific routine.. 3593.97 BogoMIPS (lpj=7187949) [ 9.795146] Security Framework v1.0.0 initialized [ 9.795152] SELinux: Disabled at boot. [ 9.795165] Mount-cache hash table entries: 512 [ 9.795287] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 9.795295] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 9.795298] CPU: L2 Cache: 512K (64 bytes/line) [ 9.795301] CPU 0(2) -> Core 0 [ 9.795302] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 9.795312] Compat vDSO mapped to ffffe000. [ 9.795316] Remapping vsyscall page to ffffe000 [ 9.795325] Checking 'hlt' instruction... OK. [ 9.811211] SMP alternatives: switching to UP code [ 9.811555] Early unpacking initramfs... done [ 10.121130] ACPI: Core revision 20060707 [ 10.144477] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 10.149738] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02 [ 10.149759] SMP alternatives: switching to SMP code [ 10.149826] Booting processor 1/1 eip 3000 [ 10.160136] Initializing CPU#1 [ 10.238988] Calibrating delay using timer specific routine.. 3591.09 BogoMIPS (lpj=7182198) [ 10.238995] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 10.239002] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 10.239004] CPU: L2 Cache: 512K (64 bytes/line) [ 10.239007] CPU 1(2) -> Core 1 [ 10.239008] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 10.239072] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02 [ 10.239091] Total of 2 processors activated (7185.07 BogoMIPS). [ 10.239237] ENABLING IO-APIC IRQs [ 10.239421] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.386781] checking TSC synchronization across 2 CPUs: [ 0.000002] CPU#0 had -61 usecs TSC skew, fixed it up. [ 0.000004] CPU#1 had 61 usecs TSC skew, fixed it up. [ 0.003997] Brought up 2 CPUs [ 0.033370] migration_cost=221 [ 0.033610] Booting paravirtualized kernel on bare hardware [ 0.033691] Time: 11:22:19 Date: 07/03/107 [ 0.033721] NET: Registered protocol family 16 [ 0.033798] EISA bus registered [ 0.033801] ACPI: bus type pci registered [ 0.090558] PCI: PCI BIOS revision 2.10 entry at 0xfb156, last bus=13 [ 0.090561] PCI: Using configuration type 1 [ 0.090563] Setting up standard PCI resources [ 0.127538] ACPI: Interpreter enabled [ 0.127541] ACPI: Using IOAPIC for interrupt routing [ 0.127884] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.127890] PCI: Probing PCI hardware (bus 00) [ 0.127905] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 0.155071] Boot video device is 0000:01:05.0 [ 0.155760] PCI: Transparent bridge - 0000:00:14.4 [ 0.155796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.169546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.189489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.190959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.191271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.191817] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *0, disabled. [ 0.192085] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *0, disabled. [ 0.192349] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. [ 0.192613] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.192877] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.193141] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.193405] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.193670] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.194481] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.194490] pnp: PnP ACPI init [ 0.253102] pnp: PnP ACPI: found 12 devices [ 0.253105] PnPBIOS: Disabled by ACPI PNP [ 0.253153] PCI: Using ACPI for IRQ routing [ 0.253156] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.253173] PCI: Cannot allocate resource region 5 of device 0000:00:12.0 [ 0.289071] NET: Registered protocol family 8 [ 0.289073] NET: Registered protocol family 20 [ 0.318102] pnp: 00:05: ioport range 0xc80-0xcff could not be reserved [ 0.318111] pnp: 00:09: ioport range 0x900-0x97f has been reserved [ 0.318114] pnp: 00:09: ioport range 0x980-0x9ff has been reserved [ 0.318116] pnp: 00:09: ioport range 0xa00-0xa7f has been reserved [ 0.318119] pnp: 00:09: ioport range 0xa80-0xaff has been reserved [ 0.318122] pnp: 00:09: ioport range 0xcb0-0xcff could not be reserved [ 0.318124] pnp: 00:09: ioport range 0xd00-0xd7f has been reserved [ 0.318127] pnp: 00:09: ioport range 0xd80-0xdff has been reserved [ 0.318131] pnp: 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 0.318134] pnp: 00:0a: ioport range 0x1006-0x1007 has been reserved [ 0.318137] pnp: 00:0a: ioport range 0x100a-0x1059 could not be reserved [ 0.318140] pnp: 00:0a: ioport range 0x1080-0x10bf has been reserved [ 0.318143] pnp: 00:0a: ioport range 0x10c0-0x10df could not be reserved [ 0.318146] pnp: 00:0a: ioport range 0x1010-0x102f could not be reserved [ 0.318149] pnp: 00:0a: ioport range 0x809-0x809 has been reserved [ 0.318413] PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0 [ 0.318415] PCI: Bridge: 0000:00:01.0 [ 0.318418] IO window: e000-efff [ 0.318421] MEM window: fe900000-feafffff [ 0.318424] PREFETCH window: e0000000-efffffff [ 0.318426] PCI: Bridge: 0000:00:05.0 [ 0.318428] IO window: disabled. [ 0.318431] MEM window: fe800000-fe8fffff [ 0.318433] PREFETCH window: disabled. [ 0.318436] PCI: Bridge: 0000:00:07.0 [ 0.318438] IO window: d000-dfff [ 0.318441] MEM window: fe600000-fe7fffff [ 0.318444] PREFETCH window: f0000000-f01fffff [ 0.318447] PCI: Bridge: 0000:00:14.4 [ 0.318448] IO window: disabled. [ 0.318454] MEM window: fe500000-fe5fffff [ 0.318458] PREFETCH window: disabled. [ 0.318475] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 0.318482] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 0.318517] NET: Registered protocol family 2 [ 0.363861] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.364007] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.364675] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.364978] TCP: Hash tables configured (established 131072 bind 65536) [ 0.364981] TCP reno registered [ 0.379916] checking if image is initramfs... it is [ 0.990409] Freeing initrd memory: 6768k freed [ 0.990530] Simple Boot Flag at 0x79 set to 0x1 [ 1.560000] audit: initializing netlink socket (disabled) [ 1.560000] audit(1186140139.744:1): initialized [ 1.560000] highmem bounce pool size: 64 pages [ 1.560000] VFS: Disk quotas dquot_6.5.1 [ 1.560000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.560000] io scheduler noop registered [ 1.560000] io scheduler anticipatory registered [ 1.560000] io scheduler deadline registered [ 1.560000] io scheduler cfq registered (default) [ 1.560000] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 1.560000] assign_interrupt_mode Found MSI capability [ 1.560000] Allocate Port Service[0000:00:05.0:pcie00] [ 1.564000] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 1.564000] assign_interrupt_mode Found MSI capability [ 1.564000] Allocate Port Service[0000:00:07.0:pcie00] [ 1.564000] Allocate Port Service[0000:00:07.0:pcie02] [ 1.564000] isapnp: Scanning for PnP cards... [ 1.920000] isapnp: No Plug & Play device found [ 1.940000] Real Time Clock Driver v1.12ac [ 1.940000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.940000] mice: PS/2 mouse device common for all mice [ 1.944000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.944000] input: Macintosh mouse button emulation as /class/input/input0 [ 1.944000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.944000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.944000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.944000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.944000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.944000] EISA: Probing bus 0 at eisa.0 [ 1.944000] Cannot allocate resource for EISA slot 1 [ 1.944000] EISA: Detected 0 cards. [ 1.976000] TCP cubic registered [ 1.976000] NET: Registered protocol family 1 [ 1.976000] Starting balanced_irq [ 1.976000] Using IPI No-Shortcut mode [ 1.976000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.976000] ACPI: (supports S0 S3 S4 S5) [ 1.976000] Magic number: 3:225:377 [ 1.976000] Freeing unused kernel memory: 328k freed [ 1.980000] Time: hpet clocksource has been installed. [ 3.216000] Capability LSM initialized [ 3.260000] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.260000] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.268000] ACPI: Thermal Zone [THM] (48 C) [ 3.704000] usbcore: registered new interface driver usbfs [ 3.704000] usbcore: registered new interface driver hub [ 3.740000] usbcore: registered new device driver usb [ 3.748000] SCSI subsystem initialized [ 3.760000] libata version 2.20 loaded. [ 3.764000] ahci 0000:00:12.0: version 2.1 [ 3.764000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 3.776000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.852000] ieee1394: Initialized config rom entry `ip1394' [ 4.772000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 4.772000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part [ 4.772000] ata1: SATA max UDMA/133 cmd 0xf884c100 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 4.772000] ata2: SATA max UDMA/133 cmd 0xf884c180 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 4.772000] ata3: SATA max UDMA/133 cmd 0xf884c200 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 4.772000] ata4: SATA max UDMA/133 cmd 0xf884c280 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 4.772000] scsi0 : ahci [ 5.268000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.268000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 5.268000] ata1.00: ATA-8: FUJITSU MHW2160BH, 0085001C, max UDMA/100 [ 5.268000] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 5.268000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 5.268000] ata1.00: configured for UDMA/100 [ 5.268000] scsi1 : ahci [ 5.580000] ata2: SATA link down (SStatus 0 SControl 300) [ 5.580000] scsi2 : ahci [ 5.892000] ata3: SATA link down (SStatus 0 SControl 300) [ 5.892000] scsi3 : ahci [ 6.204000] ata4: SATA link down (SStatus 0 SControl 300) [ 6.204000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2160B 0085 PQ: 0 ANSI: 5 [ 6.208000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 20 (level, low) -> IRQ 17 [ 6.208000] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 6.208000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 6.208000] ehci_hcd 0000:00:13.5: debug port 1 [ 6.208000] ehci_hcd 0000:00:13.5: irq 17, io mem 0xffa80000 [ 6.208000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.208000] usb usb1: configuration #1 chosen from 1 choice [ 6.208000] hub 1-0:1.0: USB hub found [ 6.208000] hub 1-0:1.0: 10 ports detected [ 6.216000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [ 6.216000] sda: Write Protect is off [ 6.216000] sda: Mode Sense: 00 3a 00 00 [ 6.216000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.216000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [ 6.216000] sda: Write Protect is off [ 6.216000] sda: Mode Sense: 00 3a 00 00 [ 6.216000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.216000] sda: sda1 sda2 < sda5 sda6 > sda3 [ 6.272000] sd 0:0:0:0: Attached scsi disk sda [ 6.276000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.316000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 6.316000] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 6.316000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 6.316000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xffb00000 [ 6.376000] usb usb2: configuration #1 chosen from 1 choice [ 6.376000] hub 2-0:1.0: USB hub found [ 6.376000] hub 2-0:1.0: 2 ports detected [ 6.484000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19 [ 6.484000] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 6.484000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 6.484000] ohci_hcd 0000:00:13.1: irq 19, io mem 0xffb01000 [ 6.520000] Attempting manual resume [ 6.520000] swsusp: Resume From Partition 8:5 [ 6.520000] PM: Checking swsusp image. [ 6.520000] PM: Resume from disk failed. [ 6.544000] usb usb3: configuration #1 chosen from 1 choice [ 6.544000] hub 3-0:1.0: USB hub found [ 6.544000] hub 3-0:1.0: 2 ports detected [ 6.576000] kjournald starting. Commit interval 5 seconds [ 6.576000] EXT3-fs: mounted filesystem with ordered data mode. [ 6.652000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 6.652000] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 6.652000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 6.652000] ohci_hcd 0000:00:13.2: irq 20, io mem 0xffb02000 [ 6.712000] usb usb4: configuration #1 chosen from 1 choice [ 6.712000] hub 4-0:1.0: USB hub found [ 6.712000] hub 4-0:1.0: 2 ports detected [ 6.752000] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 6.816000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19 [ 6.816000] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 6.816000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 6.816000] ohci_hcd 0000:00:13.3: irq 19, io mem 0xffb03000 [ 6.880000] usb usb5: configuration #1 chosen from 1 choice [ 6.880000] hub 5-0:1.0: USB hub found [ 6.880000] hub 5-0:1.0: 2 ports detected [ 6.896000] usb 1-6: configuration #1 chosen from 1 choice [ 6.984000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20 [ 6.984000] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 6.984000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 6.984000] ohci_hcd 0000:00:13.4: irq 20, io mem 0xffb04000 [ 7.048000] usb usb6: configuration #1 chosen from 1 choice [ 7.048000] hub 6-0:1.0: USB hub found [ 7.048000] hub 6-0:1.0: 2 ports detected [ 7.156000] b44.c:v1.01 (Jun 16, 2006) [ 7.156000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 7.156000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1 [ 7.156000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18 [ 7.156000] SB600_PATA: chipset revision 0 [ 7.156000] SB600_PATA: not 100% native mode: will probe irqs later [ 7.156000] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio [ 7.156000] Probing IDE interface ide0... [ 7.156000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:19:b9:83:9d:11 [ 7.224000] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 7.440000] usb 2-1: configuration #1 chosen from 1 choice [ 7.908000] hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive [ 8.588000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 8.612000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 23 (level, low) -> IRQ 22 [ 8.664000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fe5fd800-fe5fdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 9.944000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[324fc0003b4c8070] [ 15.200000] input: PC Speaker as /class/input/input2 [ 15.208000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.220000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.240000] Linux agpgart interface v0.102 (c) Dave Jones [ 15.420000] usbcore: registered new interface driver hiddev [ 15.540000] sdhci: Secure Digital Host Controller Interface driver [ 15.540000] sdhci: Copyright(c) Pierre Ossman [ 15.540000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 15.540000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 20 (level, low) -> IRQ 17 [ 15.540000] mmc0: SDHCI at 0xfe5fd400 irq 17 DMA [ 15.572000] input: USB Optical Mouse as /class/input/input3 [ 15.572000] input: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1 [ 15.572000] usbcore: registered new interface driver usbhid [ 15.572000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 15.616000] Linux video capture interface: v2.00 [ 15.684000] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 15.684000] Uniform CD-ROM driver Revision: 3.20 [ 15.780000] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 15.780000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 15.780000] uvcvideo: Failed to initialize the device (-5). [ 15.780000] usbcore: registered new interface driver uvcvideo [ 15.780000] USB Video Class driver (v0.1.0) [ 15.796000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000 [ 15.796000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 15.836000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 16.032000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18 [ 17.268000] hda_intel: azx_get_response timeout, switching to polling mode... [ 18.272000] hda_intel: azx_get_response timeout, switching to single_cmd mode... [ 18.272000] hda-intel: no codecs initialized [ 18.272000] ACPI: PCI interrupt for device 0000:00:14.2 disabled [ 18.404000] lp: driver loaded but no devices found [ 18.444000] ndiswrapper version 1.38 loaded (preempt=no,smp=yes) [ 18.548000] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded [ 18.548000] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 19 [ 18.548000] PCI: Setting latency timer of device 0000:0b:00.0 to 64 [ 18.552000] ndiswrapper: using IRQ 19 [ 19.196000] wlan0: ethernet device 00:19:7e:af:53:5e using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf [ 19.196000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 19.200000] usbcore: registered new interface driver ndiswrapper [ 19.276000] fuse init (API version 7.8) [ 19.316000] Adding 5695000k swap on /dev/disk/by-uuid/fa17a9a8-ea11-4a8c-bc55-0d971029597d. Priority:-1 extents:1 across:5695000k [ 19.492000] EXT3 FS on sda1, internal journal [ 20.364000] ACPI: Battery Slot [BAT0] (battery present) [ 20.428000] input: Lid Switch as /class/input/input5 [ 20.428000] ACPI: Lid Switch [LID] [ 20.428000] input: Power Button (CM) as /class/input/input6 [ 20.428000] ACPI: Power Button (CM) [PBTN] [ 20.428000] input: Sleep Button (CM) as /class/input/input7 [ 20.428000] ACPI: Sleep Button (CM) [SBTN] [ 20.488000] ACPI: AC Adapter [AC] (on-line) [ 20.496000] ibm_acpi: ec object not found [ 20.548000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 20.556000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 20.652000] Using specific hotkey driver [ 20.700000] No dock devices found. [ 20.748000] pcc_acpi: loading... [ 21.040000] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (version 2.00.00) [ 21.040000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 [ 21.040000] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x15 [ 21.040000] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e [ 25.512000] ppdev: user-space parallel port driver [ 26.380000] apm: BIOS not found. [ 26.936000] NET: Registered protocol family 10 [ 26.936000] lo: Disabled Privacy Extensions [ 26.936000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.936000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.124000] Bluetooth: Core ver 2.11 [ 27.124000] NET: Registered protocol family 31 [ 27.124000] Bluetooth: HCI device and connection manager initialized [ 27.124000] Bluetooth: HCI socket layer initialized [ 27.152000] Bluetooth: L2CAP ver 2.8 [ 27.152000] Bluetooth: L2CAP socket layer initialized [ 27.456000] Bluetooth: RFCOMM socket layer initialized [ 27.456000] Bluetooth: RFCOMM TTY layer initialized [ 27.456000] Bluetooth: RFCOMM ver 1.8 [ 28.988000] /dev/vmmon[5209]: VMCI: Driver initialized. [ 28.988000] /dev/vmmon[5209]: Module vmmon: registered with major=10 minor=165 [ 28.992000] /dev/vmmon[5209]: Module vmmon: initialized [ 30.204000] /dev/vmnet: open called by PID 5263 (vmnet-bridge) [ 30.208000] /dev/vmnet: hub 0 does not exist, allocating memory. [ 30.208000] /dev/vmnet: port on hub 0 successfully opened [ 30.208000] bridge-eth0: enabling the bridge [ 30.208000] bridge-eth0: up [ 30.208000] bridge-eth0: already up [ 30.208000] bridge-eth0: attached [ 30.296000] /dev/vmnet: open called by PID 5280 (vmnet-netifup) [ 30.296000] /dev/vmnet: hub 1 does not exist, allocating memory. [ 30.296000] /dev/vmnet: port on hub 1 successfully opened [ 30.712000] /dev/vmnet: open called by PID 5279 (vmnet-dhcpd) [ 30.716000] /dev/vmnet: port on hub 1 successfully opened [ 30.720000] /dev/vmnet: open called by PID 5297 (vmnet-netifup) [ 30.720000] /dev/vmnet: hub 8 does not exist, allocating memory. [ 30.720000] /dev/vmnet: port on hub 8 successfully opened [ 30.864000] /dev/vmnet: open called by PID 5309 (vmnet-dhcpd) [ 30.868000] /dev/vmnet: port on hub 8 successfully opened [ 31.104000] /dev/vmnet: open called by PID 5317 (vmnet-natd) [ 31.104000] /dev/vmnet: port on hub 8 successfully opened [ 40.520000] vmnet1: no IPv6 routers present [ 41.636000] vmnet8: no IPv6 routers present