Output of the command: - uname -a Linux ubuntu 2.6.22-9-generic #1 SMP Fri Aug 3 00:50:37 GMT 2007 i686 GNU/Linux -dmesg.log: [ 0.000000] Linux version 2.6.22-9-generic (buildd@palmer) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:50:37 GMT 2007 (Ubuntu 2.6.22-9.25-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5570 [ 0.000000] Entering add_active_range(0, 0, 524000) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524000 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524000 [ 0.000000] On node 0 totalpages: 524000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292323 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F6F10, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FEE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7FEE3180, 4A88 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: HPET 7FEE7D80, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 7FEE7E00, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 7FEE7C80, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT 7FEE7E80, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 7FEE8310, 0275 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) [ 0.000000] Built 1 zonelists. Total pages: 519907 [ 0.000000] Kernel command line: root=UUID=d466e4a9-1ea7-43aa-a96f-c6c90269157c ro quiet splash live 8139too locale=pl_PL [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2333.399 MHz processor. [ 21.588900] Console: colour VGA+ 80x25 [ 21.589051] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 21.589241] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 21.651274] Memory: 2066600k/2096000k available (2010k kernel code, 28204k reserved, 917k data, 364k init, 1178496k highmem) [ 21.651280] virtual kernel memory layout: [ 21.651281] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 21.651282] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 21.651283] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 21.651283] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 21.651284] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 21.651285] .data : 0xc02f6806 - 0xc03dbe64 ( 917 kB) [ 21.651286] .text : 0xc0100000 - 0xc02f6806 (2010 kB) [ 21.651288] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 21.651313] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 21.651329] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 21.651333] hpet0: 4 64-bit timers, 14318180 Hz [ 21.732186] Calibrating delay using timer specific routine.. 4669.85 BogoMIPS (lpj=9339709) [ 21.732202] Security Framework v1.0.0 initialized [ 21.732205] SELinux: Disabled at boot. [ 21.732214] Mount-cache hash table entries: 512 [ 21.732295] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 [ 21.732301] monitor/mwait feature present. [ 21.732302] using mwait in idle threads. [ 21.732305] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.732307] CPU: L2 cache: 4096K [ 21.732308] CPU: Physical Processor ID: 0 [ 21.732310] CPU: Processor Core ID: 0 [ 21.732311] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001 [ 21.732317] Compat vDSO mapped to ffffe000. [ 21.732326] Checking 'hlt' instruction... OK. [ 21.748233] SMP alternatives: switching to UP code [ 21.748529] Early unpacking initramfs... done [ 21.979607] ACPI: Core revision 20070126 [ 21.979637] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.981772] CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b [ 21.981784] SMP alternatives: switching to SMP code [ 21.981830] Booting processor 1/1 eip 3000 [ 21.992088] Initializing CPU#1 [ 22.071516] Calibrating delay using timer specific routine.. 4666.65 BogoMIPS (lpj=9333313) [ 22.071521] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 [ 22.071524] monitor/mwait feature present. [ 22.071526] CPU: L1 I cache: 32K, L1 D cache: 32K [ 22.071527] CPU: L2 cache: 4096K [ 22.071529] CPU: Physical Processor ID: 0 [ 22.071530] CPU: Processor Core ID: 1 [ 22.071531] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001 [ 22.072142] CPU1: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b [ 22.072157] Total of 2 processors activated (9336.51 BogoMIPS). [ 22.072293] ENABLING IO-APIC IRQs [ 22.072451] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 22.219285] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 22.239257] Brought up 2 CPUs [ 22.505324] migration_cost=15 [ 22.505410] Booting paravirtualized kernel on bare hardware [ 22.505458] Time: 9:06:11 Date: 07/11/107 [ 22.505471] NET: Registered protocol family 16 [ 22.505526] EISA bus registered [ 22.505529] ACPI: bus type pci registered [ 22.511216] PCI: PCI BIOS revision 3.00 entry at 0xfb660, last bus=5 [ 22.511218] PCI: Using configuration type 1 [ 22.511219] Setting up standard PCI resources [ 22.511825] mtrr: your CPUs had inconsistent variable MTRR settings [ 22.511827] mtrr: probably your BIOS does not setup all CPUs. [ 22.511828] mtrr: corrected configuration. [ 22.512646] ACPI: EC: Look up EC in DSDT [ 22.515718] ACPI: Interpreter enabled [ 22.515721] ACPI: (supports S0 S1 S4 S5) [ 22.515734] ACPI: Using IOAPIC for interrupt routing [ 22.519878] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.519894] PCI: Probing PCI hardware (bus 00) [ 22.521103] PCI: Transparent bridge - 0000:00:1e.0 [ 22.521151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.521262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 22.521317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 22.521372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 22.521424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 22.529436] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 22.529509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 22.529580] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 22.529655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 22.529726] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 22.529796] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 22.529866] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 22.529937] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 22.530009] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.530017] pnp: PnP ACPI init [ 22.530023] ACPI: bus type pnp registered [ 22.531977] pnp: PnP ACPI: found 15 devices [ 22.531978] ACPI: ACPI bus type pnp unregistered [ 22.531982] PnPBIOS: Disabled by ACPI PNP [ 22.532013] PCI: Using ACPI for IRQ routing [ 22.532014] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.564540] NET: Registered protocol family 8 [ 22.564541] NET: Registered protocol family 20 [ 22.564591] pnp: 00:0b: ioport range 0x400-0x4bf has been reserved [ 22.564595] pnp: 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 22.564599] pnp: 00:0d: iomem range 0xccc00-0xcffff has been reserved [ 22.564601] pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 22.564603] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 22.564605] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 22.566546] Time: tsc clocksource has been installed. [ 22.566552] Switched to high resolution mode on CPU 0 [ 22.566609] Switched to high resolution mode on CPU 1 [ 22.594739] PCI: Bridge: 0000:00:01.0 [ 22.594741] IO window: b000-bfff [ 22.594743] MEM window: f4000000-f7ffffff [ 22.594745] PREFETCH window: e0000000-efffffff [ 22.594748] PCI: Bridge: 0000:00:1c.0 [ 22.594750] IO window: 9000-9fff [ 22.594753] MEM window: disabled. [ 22.594755] PREFETCH window: disabled. [ 22.594759] PCI: Bridge: 0000:00:1c.3 [ 22.594761] IO window: c000-cfff [ 22.594764] MEM window: fa000000-fa0fffff [ 22.594767] PREFETCH window: disabled. [ 22.594770] PCI: Bridge: 0000:00:1c.4 [ 22.594772] IO window: a000-afff [ 22.594775] MEM window: disabled. [ 22.594778] PREFETCH window: disabled. [ 22.594782] PCI: Bridge: 0000:00:1e.0 [ 22.594783] IO window: d000-dfff [ 22.594787] MEM window: f8000000-f9ffffff [ 22.594790] PREFETCH window: 80000000-800fffff [ 22.594800] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.594803] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.594816] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.594820] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.594833] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 22.594836] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 22.594849] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.594852] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 22.594860] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 22.594867] NET: Registered protocol family 2 [ 22.642380] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 22.642412] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 22.642865] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 22.643011] TCP: Hash tables configured (established 131072 bind 65536) [ 22.643012] TCP reno registered [ 22.658430] checking if image is initramfs... it is [ 23.114630] Freeing initrd memory: 7090k freed [ 23.115010] audit: initializing netlink socket (disabled) [ 23.115021] audit(1186823171.292:1): initialized [ 23.115085] highmem bounce pool size: 64 pages [ 23.116326] VFS: Disk quotas dquot_6.5.1 [ 23.116358] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 23.116419] io scheduler noop registered [ 23.116420] io scheduler anticipatory registered [ 23.116421] io scheduler deadline registered [ 23.116431] io scheduler cfq registered (default) [ 23.116531] Boot video device is 0000:01:00.0 [ 23.116587] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 23.116612] assign_interrupt_mode Found MSI capability [ 23.116632] Allocate Port Service[0000:00:01.0:pcie00] [ 23.116684] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 23.116715] assign_interrupt_mode Found MSI capability [ 23.116740] Allocate Port Service[0000:00:1c.0:pcie00] [ 23.116760] Allocate Port Service[0000:00:1c.0:pcie02] [ 23.116818] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 23.116849] assign_interrupt_mode Found MSI capability [ 23.116874] Allocate Port Service[0000:00:1c.3:pcie00] [ 23.116896] Allocate Port Service[0000:00:1c.3:pcie02] [ 23.116952] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 23.116983] assign_interrupt_mode Found MSI capability [ 23.117008] Allocate Port Service[0000:00:1c.4:pcie00] [ 23.117030] Allocate Port Service[0000:00:1c.4:pcie02] [ 23.117153] isapnp: Scanning for PnP cards... [ 23.469281] isapnp: No Plug & Play device found [ 23.482544] Real Time Clock Driver v1.12ac [ 23.482620] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.482996] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.483454] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.483573] input: Macintosh mouse button emulation as /class/input/input0 [ 23.483628] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 23.483895] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.483898] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.483994] mice: PS/2 mouse device common for all mice [ 23.484063] EISA: Probing bus 0 at eisa.0 [ 23.484087] EISA: Detected 0 cards. [ 23.484140] TCP cubic registered [ 23.484147] NET: Registered protocol family 1 [ 23.484161] Using IPI No-Shortcut mode [ 23.484269] Magic number: 3:854:120 [ 23.484417] Freeing unused kernel memory: 364k freed [ 23.502266] input: AT Translated Set 2 keyboard as /class/input/input1 [ 24.621521] AppArmor: AppArmor initialized [ 24.621525] audit(1186823172.792:2): AppArmor initialized [ 24.621526] [ 24.623877] AppArmor: Registered secondary security module: capability. [ 24.623879] Capability LSM initialized as secondary [ 24.628874] ACPI: Processor [CPU0] (supports 2 throttling states) [ 24.628956] ACPI: SSDT 7FEE8280, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 24.629036] ACPI: Processor [CPU1] (supports 2 throttling states) [ 24.629043] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 24.629050] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 24.910438] usbcore: registered new interface driver usbfs [ 24.910454] usbcore: registered new interface driver hub [ 24.910471] usbcore: registered new device driver usb [ 24.910962] USB Universal Host Controller Interface driver v3.0 [ 24.911002] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.911010] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 24.911012] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 24.911101] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 24.911124] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 24.911194] usb usb1: configuration #1 chosen from 1 choice [ 24.911210] hub 1-0:1.0: USB hub found [ 24.911213] hub 1-0:1.0: 2 ports detected [ 24.942899] SCSI subsystem initialized [ 24.946263] libata version 2.21 loaded. [ 24.989888] Floppy drive(s): fd0 is 1.44M [ 25.004476] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 25.013905] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 25.013913] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 25.013915] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 25.014001] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 25.014025] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e500 [ 25.014237] usb usb2: configuration #1 chosen from 1 choice [ 25.014325] hub 2-0:1.0: USB hub found [ 25.014329] hub 2-0:1.0: 2 ports detected [ 25.019584] FDC 0 is a post-1991 82077 [ 25.117551] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 25.117558] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 25.117561] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 25.117578] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 25.117600] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e000 [ 25.117670] usb usb3: configuration #1 chosen from 1 choice [ 25.117685] hub 3-0:1.0: USB hub found [ 25.117689] hub 3-0:1.0: 2 ports detected [ 25.221343] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 25.221349] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 25.221351] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 25.221367] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 25.221388] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e200 [ 25.221458] usb usb4: configuration #1 chosen from 1 choice [ 25.221475] hub 4-0:1.0: USB hub found [ 25.221478] hub 4-0:1.0: 2 ports detected [ 25.325129] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 25.325135] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 25.325138] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 25.325153] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 25.325175] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e300 [ 25.325247] usb usb5: configuration #1 chosen from 1 choice [ 25.325263] hub 5-0:1.0: USB hub found [ 25.325266] hub 5-0:1.0: 2 ports detected [ 25.429173] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 25.429178] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 25.429181] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 25.429309] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 25.429328] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e400 [ 25.429630] usb usb6: configuration #1 chosen from 1 choice [ 25.429772] hub 6-0:1.0: USB hub found [ 25.429777] hub 6-0:1.0: 2 ports detected [ 25.533071] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19 [ 25.533077] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 25.533080] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 25.533919] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 25.533941] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 25.533944] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfa101000 [ 25.537828] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.537880] usb usb7: configuration #1 chosen from 1 choice [ 25.537899] hub 7-0:1.0: USB hub found [ 25.537902] hub 7-0:1.0: 6 ports detected [ 25.640542] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 25.640551] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 25.640554] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 25.640571] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 25.640593] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 25.640598] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfa100000 [ 25.644465] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.644516] usb usb8: configuration #1 chosen from 1 choice [ 25.644533] hub 8-0:1.0: USB hub found [ 25.644536] hub 8-0:1.0: 6 ports detected [ 25.748365] ahci 0000:03:00.0: version 2.2 [ 25.748382] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 26.750258] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 26.750262] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 26.750269] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 26.750375] scsi0 : ahci [ 26.750416] scsi1 : ahci [ 26.750433] ata1: SATA max UDMA/133 cmd 0xf887c100 ctl 0x00000000 bmdma 0x00000000 irq 17 [ 26.750436] ata2: SATA max UDMA/133 cmd 0xf887c180 ctl 0x00000000 bmdma 0x00000000 irq 17 [ 27.061632] ata1: SATA link down (SStatus 0 SControl 300) [ 27.373013] ata2: SATA link down (SStatus 0 SControl 300) [ 27.373041] 8139cp 0000:05:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 27.373044] 8139cp 0000:05:00.0: Try the "8139too" driver instead. [ 27.373683] PCI: Enabling device 0000:03:00.1 (0000 -> 0001) [ 27.373689] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 27.373715] PCI: Setting latency timer of device 0000:03:00.1 to 64 [ 27.373750] scsi2 : pata_jmicron [ 27.374288] scsi3 : pata_jmicron [ 27.374303] ata3: PATA max UDMA/100 cmd 0x0001c000 ctl 0x0001c102 bmdma 0x0001c400 irq 16 [ 27.374307] ata4: PATA max UDMA/100 cmd 0x0001c200 ctl 0x0001c302 bmdma 0x0001c408 irq 16 [ 27.374886] 8139too Fast Ethernet driver 0.9.28 [ 27.695717] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 27.696600] eth0: RealTek RTL8139 at 0xf8868000, 00:e0:4c:81:11:90, IRQ 21 [ 27.696602] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 27.696611] ata_piix 0000:00:1f.2: version 2.11 [ 27.696616] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 27.696629] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 [ 27.696646] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 27.696673] scsi4 : ata_piix [ 27.696700] scsi5 : ata_piix [ 27.696716] ata5: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 27.696718] ata6: SATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 28.023975] ata5.00: Host Protected Area detected: [ 28.023976] current size: 488395055 sectors [ 28.023977] native size: 488397168 sectors [ 28.023980] ata5.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133 [ 28.023983] ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 28.023986] ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33 [ 28.023987] ata5.01: applying bridge limits [ 28.039950] ata5.00: Host Protected Area detected: [ 28.039952] current size: 488395055 sectors [ 28.039952] native size: 488397168 sectors [ 28.039956] ata5.00: configured for UDMA/133 [ 28.211506] ata5.01: configured for UDMA/33 [ 28.377647] scsi 4:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 28.378464] scsi 4:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 [ 28.378501] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] [ 28.378515] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 17 [ 28.378536] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 28.378555] scsi6 : ata_piix [ 28.378580] scsi7 : ata_piix [ 28.378597] ata7: SATA max UDMA/133 cmd 0x0001e700 ctl 0x0001e802 bmdma 0x0001eb00 irq 17 [ 28.378600] ata8: SATA max UDMA/133 cmd 0x0001e900 ctl 0x0001ea02 bmdma 0x0001eb08 irq 17 [ 28.712798] sd 4:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB) [ 28.712807] sd 4:0:0:0: [sda] Write Protect is off [ 28.712809] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.712819] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.712851] sd 4:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB) [ 28.712857] sd 4:0:0:0: [sda] Write Protect is off [ 28.712858] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.712873] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.712876] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 [ 28.786020] sd 4:0:0:0: [sda] Attached SCSI disk [ 28.788492] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 28.788504] sr 4:0:1:0: Attached scsi generic sg1 type 5 [ 28.796185] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 28.796187] Uniform CD-ROM driver Revision: 3.20 [ 28.796214] sr 4:0:1:0: Attached scsi CD-ROM sr0 [ 29.022156] kjournald starting. Commit interval 5 seconds [ 29.022162] EXT3-fs: mounted filesystem with ordered data mode. [ 33.497270] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 34.070348] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 34.071620] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.114333] Linux agpgart interface v0.102 (c) Dave Jones [ 34.539209] gameport: EMU10K1 is pci0000:05:01.1/gameport0, io 0xd200, speed 514kHz [ 34.562931] input: PC Speaker as /class/input/input2 [ 34.716557] NET: Registered protocol family 17 [ 34.861933] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 35.156166] input: ImPS/2 Generic Wheel Mouse as /class/input/input3 [ 35.158999] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 35.360269] fuse init (API version 7.8) [ 35.372347] lp0: using parport0 (interrupt-driven). [ 35.755508] EXT3 FS on sda1, internal journal [ 37.192678] kjournald starting. Commit interval 5 seconds [ 37.192807] EXT3 FS on sda2, internal journal [ 37.192811] EXT3-fs: mounted filesystem with ordered data mode. [ 37.209294] kjournald starting. Commit interval 5 seconds [ 37.209459] EXT3 FS on sda5, internal journal [ 37.209462] EXT3-fs: mounted filesystem with ordered data mode. [ 37.228534] kjournald starting. Commit interval 5 seconds [ 37.228665] EXT3 FS on sda6, internal journal [ 37.228668] EXT3-fs: mounted filesystem with ordered data mode. [ 37.248080] kjournald starting. Commit interval 5 seconds [ 37.248231] EXT3 FS on sda7, internal journal [ 37.248234] EXT3-fs: mounted filesystem with ordered data mode. [ 37.393110] AppArmor: Unregistered secondary security module: capability [ 38.446092] NET: Registered protocol family 10 [ 38.446153] lo: Disabled Privacy Extensions [ 42.326281] No dock devices found. [ 42.408205] input: Power Button (FF) as /class/input/input4 [ 42.408217] ACPI: Power Button (FF) [PWRF] [ 42.408244] input: Power Button (CM) as /class/input/input5 [ 42.408254] ACPI: Power Button (CM) [PWRB] [ 45.003678] audit(1186815992.862:3): PERMITTING m access to /etc/passwd (cupsd(5199) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 45.004050] audit(1186815992.862:4): PERMITTING m access to /etc/group (cupsd(5199) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 45.004829] audit(1186815992.862:5): PERMITTING m access to /etc/group (cupsd(5199) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 45.616073] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 45.616076] apm: disabled - APM is not SMP safe. [ 45.982589] AppArmor: Registered secondary security module: capability. [ 45.982592] Capability LSM initialized as secondary [ 46.135933] Bluetooth: Core ver 2.11 [ 46.136048] NET: Registered protocol family 31 [ 46.136050] Bluetooth: HCI device and connection manager initialized [ 46.136052] Bluetooth: HCI socket layer initialized [ 46.168786] Bluetooth: L2CAP ver 2.8 [ 46.168788] Bluetooth: L2CAP socket layer initialized [ 46.427614] Bluetooth: RFCOMM socket layer initialized [ 46.427641] Bluetooth: RFCOMM TTY layer initialized [ 46.427643] Bluetooth: RFCOMM ver 1.8 [ 49.219706] eth0: no IPv6 routers present [ 66.165587] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 66.339338] usb 1-1: configuration #1 chosen from 1 choice [ 66.452069] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C [ 66.452291] usbcore: registered new interface driver usblp [ 66.452374] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver -lspci-vvnn.log: 00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:29c0] (rev 02) Subsystem: Giga-byte Technology Unknown device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [88] Subsystem: Giga-byte Technology Unknown device [1458:5000] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41b9 Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2 Link: Latency L0s <256ns, L1 <64us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 32, PowerLimit 75.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:1a.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Unknown device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 16, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41c1 Capabilities: [90] Subsystem: Giga-byte Technology Unknown device [1458:5001] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.3 PCI bridge [0604]: Intel Corporation Unknown device [8086:2946] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 4 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 19, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41c9 Capabilities: [90] Subsystem: Giga-byte Technology Unknown device [1458:5001] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.4 PCI bridge [0604]: Intel Corporation Unknown device [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 5 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 20, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41d1 Capabilities: [90] Subsystem: Giga-byte Technology Unknown device [1458:5001] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Unknown device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Subsystem: Giga-byte Technology Unknown device [1458:5000] 00:1f.0 ISA bridge [0601]: Intel Corporation Unknown device [8086:2916] (rev 02) Subsystem: Giga-byte Technology Unknown device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-