[ 0.000000] Linux version 2.6.22-8-generic (buildd@yellow) (gcc version 4.1.3 20070629 (prerelease) (Ubuntu 4.1.2-13ubuntu2)) #1 SMP Thu Jul 12 16:09:47 GMT 2007 [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz all_generic_ide [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fee1000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee1000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 523984) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7B80, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7FED3BD3, 007C (r1 ACRSYS ACRPRDCT 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FEDDC2A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7FED4F76, 8C40 (r2 INTEL CRESTLNE 6040000 MSFT 3000001) [ 0.000000] ACPI: FACS 7FEE0FC0, 0040 [ 0.000000] ACPI: APIC 7FEDDD1E, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7FEDDD86, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7FEDDDBE, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 7FEDDDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FEDDE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7FEDDE8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer 0) [ 0.000000] ACPI: SSDT 7FED4C99, 02DD (r1 SataRe SataAhci 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FED41DB, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FED4135, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FED3C4F, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fed0000 [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 523984) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fed0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 155 [ 0.000000] 0: 256 -> 523984 [ 0.000000] On node 0 totalpages: 523883 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1129 pages reserved [ 0.000000] DMA zone: 2810 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7107 pages used for memmap [ 0.000000] DMA32 zone: 512781 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515591 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz all_generic_ide [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 38.650521] time.c: Detected 2000.071 MHz processor. [ 38.654465] Console: colour VGA+ 80x25 [ 38.663850] Checking aperture... [ 38.663979] Calgary: detecting Calgary via BIOS EBDA area [ 38.663981] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 38.683163] Memory: 2054792k/2095936k available (2271k kernel code, 40740k reserved, 1181k data, 300k init) [ 38.683340] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 38.760307] Calibrating delay using timer specific routine.. 4004.30 BogoMIPS (lpj=8008614) [ 38.760573] Security Framework v1.0.0 initialized [ 38.760699] SELinux: Disabled at boot. [ 38.760991] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 38.762301] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 38.762995] Mount-cache hash table entries: 256 [ 38.763235] CPU: L1 I cache: 32K, L1 D cache: 32K [ 38.763473] CPU: L2 cache: 4096K [ 38.763591] CPU 0/0 -> Node 0 [ 38.763708] using mwait in idle threads. [ 38.763827] CPU: Physical Processor ID: 0 [ 38.763946] CPU: Processor Core ID: 0 [ 38.764068] CPU0: Thermal monitoring handled by SMI [ 38.764078] SMP alternatives: switching to UP code [ 38.764375] ACPI: Core revision 20070126 [ 38.808871] Using local APIC timer interrupts. [ 38.858894] result 12500442 [ 38.859011] Detected 12.500 MHz APIC timer. [ 38.860171] SMP alternatives: switching to SMP code [ 38.860320] Booting processor 1/2 APIC 0x1 [ 38.871320] Initializing CPU#1 [ 38.947940] Calibrating delay using timer specific routine.. 4000.42 BogoMIPS (lpj=8000845) [ 38.947947] CPU: L1 I cache: 32K, L1 D cache: 32K [ 38.947949] CPU: L2 cache: 4096K [ 38.947951] CPU 1/1 -> Node 0 [ 38.947953] CPU: Physical Processor ID: 0 [ 38.947954] CPU: Processor Core ID: 1 [ 38.947959] CPU1: Thermal monitoring enabled (TM2) [ 38.948451] Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 38.951947] Brought up 2 CPUs [ 39.020654] migration_cost=11 [ 39.021161] NET: Registered protocol family 16 [ 39.021353] ACPI: bus type pci registered [ 39.024733] PCI: Using MMCONFIG at e0000000 - efffffff [ 39.026741] ACPI: EC: Look up EC in DSDT [ 39.027435] ACPI: EC: GPE=0x18, ports=0x66, 0x62 [ 41.544972] ACPI: System BIOS is requesting _OSI(Linux) [ 41.545093] ACPI: Please test with "acpi_osi=!Linux" [ 41.545094] Please send dmidecode to linux-acpi@vger.kernel.org [ 41.546237] ACPI: Interpreter enabled [ 41.546358] ACPI: (supports S0 S3 S4 S5) [ 41.547025] ACPI: Using IOAPIC for interrupt routing [ 41.551961] ACPI: EC: GPE=0x18, ports=0x66, 0x62 [ 41.552113] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 41.552238] PCI: Probing PCI hardware (bus 00) [ 41.554055] PCI: Transparent bridge - 0000:00:1e.0 [ 41.554231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 41.554585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 41.554713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 41.554833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 41.554959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 41.555080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 41.555214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 41.567701] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 41.569178] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 41.570763] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 41.572244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 41.573823] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 41.575526] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 41.577003] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 41.578580] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 41.580069] Linux Plug and Play Support v0.97 (c) Adam Belay [ 41.580197] pnp: PnP ACPI init [ 41.580322] ACPI: bus type pnp registered [ 41.582244] pnp: PnP ACPI: found 11 devices [ 41.582365] ACPI: ACPI bus type pnp unregistered [ 41.582530] PCI: Using ACPI for IRQ routing [ 41.582650] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 41.582788] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 41.582920] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 41.583043] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 41.583166] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 41.583288] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 [ 41.583410] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 [ 41.583532] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3 [ 41.583654] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3 [ 41.583776] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3 [ 41.583906] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.5 [ 41.584028] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.5 [ 41.584150] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.5 [ 41.584502] NET: Registered protocol family 8 [ 41.584621] NET: Registered protocol family 20 [ 41.584752] PCI-GART: No AMD northbridge found. [ 41.584883] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 41.585420] hpet0: 3 64-bit timers, 14318180 Hz [ 41.586577] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 41.586713] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 41.586860] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 41.586887] Time: hpet clocksource has been installed. [ 41.587113] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 41.587251] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 41.587650] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 [ 41.587785] PCI: Bridge: 0000:00:01.0 [ 41.587911] IO window: 2000-2fff [ 41.590543] MEM window: cc000000-ceffffff [ 41.590663] PREFETCH window: d0000000-dfffffff [ 41.590784] PCI: Bridge: 0000:00:1c.0 [ 41.590915] IO window: disabled. [ 41.591036] MEM window: disabled. [ 41.591155] PREFETCH window: disabled. [ 41.591286] PCI: Bridge: 0000:00:1c.1 [ 41.591405] IO window: 3000-3fff [ 41.591526] MEM window: 88000000-880fffff [ 41.591647] PREFETCH window: 88100000-881fffff [ 41.591800] PCI: Bridge: 0000:00:1c.3 [ 41.591928] IO window: disabled. [ 41.592048] MEM window: 88200000-882fffff [ 41.592169] PREFETCH window: disabled. [ 41.592342] PCI: Bridge: 0000:00:1c.5 [ 41.592459] IO window: disabled. [ 41.592580] MEM window: 88300000-883fffff [ 41.592700] PREFETCH window: disabled. [ 41.592831] PCI: Bridge: 0000:00:1e.0 [ 41.592954] IO window: disabled. [ 41.593073] MEM window: f0500000-f05fffff [ 41.593194] PREFETCH window: disabled. [ 41.593320] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 41.593560] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 41.593574] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 41.593823] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 41.593843] PCI: Enabling device 0000:00:1c.1 (0000 -> 0003) [ 41.593964] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 41.594206] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 41.594219] PCI: Enabling device 0000:00:1c.3 (0000 -> 0002) [ 41.594341] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 41.594583] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 41.594595] PCI: Enabling device 0000:00:1c.5 (0000 -> 0002) [ 41.594717] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 [ 41.594973] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 41.594981] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 41.594991] NET: Registered protocol family 2 [ 41.634803] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 41.635603] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 41.638295] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 41.638964] TCP: Hash tables configured (established 262144 bind 65536) [ 41.639088] TCP reno registered [ 41.650855] checking if image is initramfs... it is [ 42.305449] Freeing initrd memory: 7394k freed [ 42.308885] Simple Boot Flag at 0x35 set to 0x1 [ 42.309506] audit: initializing netlink socket (disabled) [ 42.309637] audit(1186651451.624:1): initialized [ 42.311528] VFS: Disk quotas dquot_6.5.1 [ 42.311688] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 42.311881] io scheduler noop registered [ 42.312001] io scheduler anticipatory registered [ 42.312120] io scheduler deadline registered [ 42.312314] io scheduler cfq registered (default) [ 42.316285] Boot video device is 0000:01:00.0 [ 42.316406] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 42.316420] assign_interrupt_mode Found MSI capability [ 42.316585] Allocate Port Service[0000:00:01.0:pcie00] [ 42.316617] Allocate Port Service[0000:00:01.0:pcie02] [ 42.316646] Allocate Port Service[0000:00:01.0:pcie03] [ 42.316701] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 42.316748] assign_interrupt_mode Found MSI capability [ 42.316928] Allocate Port Service[0000:00:1c.0:pcie00] [ 42.316958] Allocate Port Service[0000:00:1c.0:pcie02] [ 42.316984] Allocate Port Service[0000:00:1c.0:pcie03] [ 42.317068] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 42.317113] assign_interrupt_mode Found MSI capability [ 42.317297] Allocate Port Service[0000:00:1c.1:pcie00] [ 42.317326] Allocate Port Service[0000:00:1c.1:pcie02] [ 42.317355] Allocate Port Service[0000:00:1c.1:pcie03] [ 42.317446] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 42.317503] assign_interrupt_mode Found MSI capability [ 42.317688] Allocate Port Service[0000:00:1c.3:pcie00] [ 42.317719] Allocate Port Service[0000:00:1c.3:pcie02] [ 42.317746] Allocate Port Service[0000:00:1c.3:pcie03] [ 42.317827] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 42.317875] assign_interrupt_mode Found MSI capability [ 42.318059] Allocate Port Service[0000:00:1c.5:pcie00] [ 42.318088] Allocate Port Service[0000:00:1c.5:pcie02] [ 42.318119] Allocate Port Service[0000:00:1c.5:pcie03] [ 42.337139] Real Time Clock Driver v1.12ac [ 42.337505] hpet_resources: 0xfed00000 is busy [ 42.337533] Linux agpgart interface v0.102 (c) Dave Jones [ 42.337681] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 42.338726] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 42.338996] input: Macintosh mouse button emulation as /class/input/input0 [ 42.339217] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 42.342074] i8042.c: Detected active multiplexing controller, rev 1.1. [ 42.343488] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 42.343637] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 42.343788] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 42.343937] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 42.344090] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 42.344325] mice: PS/2 mouse device common for all mice [ 42.344581] TCP cubic registered [ 42.344770] NET: Registered protocol family 1 [ 42.345099] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 42.345265] Freeing unused kernel memory: 300k freed [ 42.373049] input: AT Translated Set 2 keyboard as /class/input/input1 [ 42.410364] SCSI subsystem initialized [ 42.414012] libata version 2.21 loaded. [ 42.414854] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 42.415171] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 42.415270] scsi0 : ata_generic [ 42.415463] scsi1 : ata_generic [ 42.415638] ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000118a0 irq 14 [ 42.415804] ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000118a8 irq 15 [ 42.744876] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33 [ 42.745031] ata1.00: configured for UDMA/33 [ 42.921137] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5 [ 42.992840] Capability LSM initialized [ 42.999268] ACPI: SSDT 7FED4957, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 42.999908] ACPI: SSDT 7FED443A, 0498 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 43.000885] Monitor-Mwait will be used to enter C-1 state [ 43.000888] Monitor-Mwait will be used to enter C-2 state [ 43.000890] Monitor-Mwait will be used to enter C-3 state [ 43.000893] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 43.001579] ACPI: Processor [CPU0] (supports 8 throttling states) [ 43.002224] ACPI: SSDT 7FED4BD1, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 43.002846] ACPI: SSDT 7FED48D2, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 43.003865] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 43.004543] ACPI: Processor [CPU1] (supports 8 throttling states) [ 43.006576] ACPI: Thermal Zone [THRM] (57 C) [ 43.324737] usbcore: registered new interface driver usbfs [ 43.324908] usbcore: registered new interface driver hub [ 43.325085] usbcore: registered new device driver usb [ 43.325793] USB Universal Host Controller Interface driver v3.0 [ 43.326034] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.326338] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 43.326341] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 43.326614] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 43.326811] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 43.327062] usb usb1: configuration #1 chosen from 1 choice [ 43.327227] hub 1-0:1.0: USB hub found [ 43.327374] hub 1-0:1.0: 2 ports detected [ 43.419556] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 43.419715] Uniform CD-ROM driver Revision: 3.20 [ 43.419903] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 43.428246] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 43.432025] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 43.432334] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 43.432337] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 43.432497] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 43.432690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 43.432915] usb usb2: configuration #1 chosen from 1 choice [ 43.433084] hub 2-0:1.0: USB hub found [ 43.433231] hub 2-0:1.0: 2 ports detected [ 43.474233] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 43.474538] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 43.474543] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 43.474798] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 43.474985] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 43.475412] usb usb3: configuration #1 chosen from 1 choice [ 43.475682] hub 3-0:1.0: USB hub found [ 43.475830] hub 3-0:1.0: 2 ports detected [ 43.494777] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 43.495098] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 43.495102] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 43.495373] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 43.495558] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 43.496003] usb usb4: configuration #1 chosen from 1 choice [ 43.496285] hub 4-0:1.0: USB hub found [ 43.496435] hub 4-0:1.0: 2 ports detected [ 43.499809] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 43.508955] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 43.509267] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 43.509270] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 43.509551] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 43.509739] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 43.510210] usb usb5: configuration #1 chosen from 1 choice [ 43.510504] hub 5-0:1.0: USB hub found [ 43.510654] hub 5-0:1.0: 2 ports detected [ 43.526175] tg3.c:v3.77 (May 31, 2007) [ 43.526253] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 43.527153] PCI: Enabling device 0000:08:00.0 (0000 -> 0002) [ 43.527345] ACPI: PCI Interrupt 0000:08:00.0[A] -> <7>PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 43.527479] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 43.527760] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 43.527839] ehci_hcd 0000:00:1a.7: debug port 1 [ 43.527856] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 43.527863] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0604800 [ 43.531784] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 43.532189] usb usb6: configuration #1 chosen from 1 choice [ 43.532377] hub 6-0:1.0: USB hub found [ 43.532383] hub 6-0:1.0: 4 ports detected [ 43.533331] GSI 17 (level, low) -> IRQ 17 [ 43.533525] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 43.560954] usb 1-2: configuration #1 chosen from 1 choice [ 43.564873] usb 1-2: can't set config #1, error -71 [ 43.565118] usb 1-2: USB disconnect, address 2 [ 43.577704] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:24:4c:08:5d [ 43.578657] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 43.578819] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 43.589161] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 43.590399] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 43.590404] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 43.590600] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 43.590797] ehci_hcd 0000:00:1d.7: debug port 1 [ 43.590946] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 43.590953] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604c00 [ 43.594977] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 43.595218] usb usb7: configuration #1 chosen from 1 choice [ 43.595386] hub 7-0:1.0: USB hub found [ 43.595531] hub 7-0:1.0: 6 ports detected [ 43.611266] ahci 0000:00:1f.2: version 2.2 [ 43.611289] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 43.797198] usb 6-2: new high speed USB device using ehci_hcd and address 2 [ 43.938116] usb 6-2: configuration #1 chosen from 1 choice [ 44.174235] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 44.218734] ISO 9660 Extensions: RRIP_1991A [ 44.265979] Registering unionfs 1.4 [ 44.266134] unionfs: debugging is not enabled [ 44.271947] loop: module loaded [ 44.301816] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 44.301985] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 44.302149] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 44.302307] scsi2 : ahci [ 44.302494] scsi3 : ahci [ 44.302682] scsi4 : ahci [ 44.302861] ata3: SATA max UDMA/133 cmd 0xffffc2000034a100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 44.303035] ata4: SATA max UDMA/133 cmd 0xffffc2000034a180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 44.303204] ata5: SATA max UDMA/133 cmd 0xffffc2000034a200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 506 [ 44.362606] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 44.366449] ata3.00: ATA-7: ST9160821AS, 3.ALD, max UDMA/133 [ 44.366602] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 44.370686] ata3.00: configured for UDMA/133 [ 44.395026] ata4: SATA link down (SStatus 0 SControl 300) [ 44.419443] ata5: SATA link down (SStatus 0 SControl 300) [ 44.419693] scsi 2:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5 [ 44.419918] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 44.420665] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 44.472625] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 44.472780] sd 2:0:0:0: [sda] Write Protect is off [ 44.472919] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.472931] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.473127] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 44.473280] sd 2:0:0:0: [sda] Write Protect is off [ 44.473422] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.473434] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.473592] sda:<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 44.610383] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 44.652456] sd 2:0:0:0: [sda] Attached SCSI disk [ 45.099514] squashfs: version 3.2-UBUNTU (2007/04/10) Phillip Lougher [ 45.737491] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc00056341200] [ 106.478002] PM: Writing back config space on device 0000:08:00.0 at offset c (was 980c0000, writing 0) [ 106.478060] PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100406, writing 100006) [ 107.507562] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 108.222205] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 108.328124] sdhci: Secure Digital Host Controller Interface driver [ 108.328282] sdhci: Copyright(c) Pierre Ossman [ 108.328474] sdhci: SDHCI controller found at 0000:0a:09.1 [1180:0822] (rev 22) [ 108.328651] ACPI: PCI Interrupt 0000:0a:09.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 108.330031] mmc0: SDHCI at 0xf0500800 irq 17 DMA [ 108.595164] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f [ 108.602329] Linux video capture interface: v2.00 [ 108.630184] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 108.897608] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101) [ 108.899168] usbcore: registered new interface driver uvcvideo [ 108.899320] USB Video Class driver (v0.1.0) [ 108.991130] NET: Registered protocol family 17 [ 109.266610] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000 [ 109.301220] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 109.317635] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 109.318970] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 110.461570] fuse init (API version 7.8) [ 110.721723] Adding 1421712k swap on /dev/sda5. Priority:-1 extents:1 across:1421712k [ 113.442625] ACPI: AC Adapter [ACAD] (on-line) [ 114.127639] ACPI: Battery Slot [BAT1] (battery present) [ 114.136999] No dock devices found. [ 114.155468] input: Power Button (FF) as /class/input/input4 [ 114.155483] ACPI: Power Button (FF) [PWRF] [ 114.155574] input: Lid Switch as /class/input/input5 [ 114.155584] ACPI: Lid Switch [LID] [ 114.155615] input: Power Button (CM) as /class/input/input6 [ 114.155627] ACPI: Power Button (CM) [PWRB] [ 114.155658] input: Sleep Button (CM) as /class/input/input7 [ 114.155671] ACPI: Sleep Button (CM) [SLPB] [ 114.251731] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 114.308424] set_level status: 0 [ 114.308852] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 120.702306] lp: driver loaded but no devices found [ 121.250106] ppdev: user-space parallel port driver [ 140.542388] Bluetooth: Core ver 2.11 [ 140.542754] NET: Registered protocol family 31 [ 140.542760] Bluetooth: HCI device and connection manager initialized [ 140.542767] Bluetooth: HCI socket layer initialized [ 140.659005] Bluetooth: L2CAP ver 2.8 [ 140.659013] Bluetooth: L2CAP socket layer initialized [ 140.747174] Bluetooth: RFCOMM socket layer initialized [ 140.747199] Bluetooth: RFCOMM TTY layer initialized [ 140.747203] Bluetooth: RFCOMM ver 1.8 [ 140.893930] NET: Registered protocol family 10 [ 140.894360] lo: Disabled Privacy Extensions [ 140.894635] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 181.563855] set_level status: 0