[ 0.000000] Linux version 2.6.22-8-generic (buildd@palmer) (gcc version 4.1.3 20070629 (prerelease) (Ubuntu 4.1.2-13ubuntu2)) #1 SMP Thu Jul 12 15:59:45 GMT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) [ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261984) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261984 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261984 [ 0.000000] On node 0 totalpages: 261984 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 254 pages used for memmap [ 0.000000] HighMem zone: 32354 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F6D70, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 3FF6A672, 004C (r1 IBM TP-1R 3230 LTP 0) [ 0.000000] ACPI: FACP 3FF6A700, 00F4 (r3 IBM TP-1R 3230 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3FF6A8E7, C530 (r1 IBM TP-1R 3230 MSFT 100000E) [ 0.000000] ACPI: FACS 3FF78000, 0040 [ 0.000000] ACPI: SSDT 3FF6A8B4, 0033 (r1 IBM TP-1R 3230 MSFT 100000E) [ 0.000000] ACPI: ECDT 3FF76E17, 0052 (r1 IBM TP-1R 3230 IBM 1) [ 0.000000] ACPI: TCPA 3FF76E69, 0032 (r1 IBM TP-1R 3230 PTL 1) [ 0.000000] ACPI: BOOT 3FF76FD8, 0028 (r1 IBM TP-1R 3230 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000) [ 0.000000] Built 1 zonelists. Total pages: 259938 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- console-setup/layoutcode=de [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0180e000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1998.408 MHz processor. [ 37.228673] Console: colour VGA+ 80x25 [ 37.229247] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 37.229817] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 37.265633] Memory: 1027456k/1047936k available (2009k kernel code, 19868k reserved, 918k data, 364k init, 130432k highmem) [ 37.265641] virtual kernel memory layout: [ 37.265642] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 37.265643] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 37.265645] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 37.265646] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 37.265647] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 37.265648] .data : 0xc02f6606 - 0xc03dbe64 ( 918 kB) [ 37.265649] .text : 0xc0100000 - 0xc02f6606 (2009 kB) [ 37.265652] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 37.265686] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 37.345640] Calibrating delay using timer specific routine.. 3999.28 BogoMIPS (lpj=7998570) [ 37.345664] Security Framework v1.0.0 initialized [ 37.345671] SELinux: Disabled at boot. [ 37.345683] Mount-cache hash table entries: 512 [ 37.345797] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [ 37.345809] CPU: L1 I cache: 32K, L1 D cache: 32K [ 37.345811] CPU: L2 cache: 2048K [ 37.345813] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 [ 37.345822] Compat vDSO mapped to ffffe000. [ 37.345832] Checking 'hlt' instruction... OK. [ 37.361723] SMP alternatives: switching to UP code [ 37.361919] Freeing SMP alternatives: 11k freed [ 37.362062] ACPI: Core revision 20070126 [ 37.365714] ACPI: setting ELCR to 0200 (from 0800) [ 37.379154] CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 06 [ 37.379159] SMP motherboard not detected. [ 37.379161] Local APIC not detected. Using dummy APIC emulation. [ 37.379194] Brought up 1 CPUs [ 37.379304] Booting paravirtualized kernel on bare hardware [ 37.379355] Time: 11:43:25 Date: 07/06/107 [ 37.379375] NET: Registered protocol family 16 [ 37.379457] EISA bus registered [ 37.379467] ACPI: bus type pci registered [ 37.379636] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 37.379638] PCI: Using configuration type 1 [ 37.379640] Setting up standard PCI resources [ 37.382792] ACPI: EC: Found ECDT [ 37.390279] ACPI: Interpreter enabled [ 37.390283] ACPI: (supports S0 S3 S4 S5) [ 37.390296] ACPI: Using PIC for interrupt routing [ 37.396035] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 37.396072] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 37.396078] PCI: Probing PCI hardware (bus 00) [ 37.396418] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 37.396421] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 37.396864] PCI: Transparent bridge - 0000:00:1e.0 [ 37.396961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 37.397007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 37.397026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 37.399999] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 37.400160] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 37.400317] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 37.400475] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 37.400620] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 37.400765] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 37.400910] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 37.401073] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 37.401296] ACPI: Power Resource [PUBS] (on) [ 37.401306] Linux Plug and Play Support v0.97 (c) Adam Belay [ 37.401314] pnp: PnP ACPI init [ 37.401319] ACPI: bus type pnp registered [ 37.404350] pnp: PnP ACPI: found 13 devices [ 37.404352] ACPI: ACPI bus type pnp unregistered [ 37.404355] PnPBIOS: Disabled by ACPI PNP [ 37.404395] PCI: Using ACPI for IRQ routing [ 37.404398] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 37.415148] NET: Registered protocol family 8 [ 37.415150] NET: Registered protocol family 20 [ 37.415199] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 37.415202] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 37.415204] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 37.415207] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 37.417583] Time: tsc clocksource has been installed. [ 37.445411] PCI: Bridge: 0000:00:01.0 [ 37.445413] IO window: 3000-3fff [ 37.445417] MEM window: c0100000-c01fffff [ 37.445419] PREFETCH window: e0000000-e7ffffff [ 37.445426] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 37.445428] IO window: 00004000-000040ff [ 37.445431] IO window: 00004400-000044ff [ 37.445435] PREFETCH window: e8000000-ebffffff [ 37.445439] MEM window: c4000000-c7ffffff [ 37.445442] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 37.445444] IO window: 00004800-000048ff [ 37.445447] IO window: 00004c00-00004cff [ 37.445451] PREFETCH window: ec000000-efffffff [ 37.445455] MEM window: c8000000-cbffffff [ 37.445458] PCI: Bridge: 0000:00:1e.0 [ 37.445460] IO window: 4000-8fff [ 37.445465] MEM window: c0200000-cfffffff [ 37.445469] PREFETCH window: e8000000-efffffff [ 37.445482] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 37.445782] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 37.445784] PCI: setting IRQ 11 as level-triggered [ 37.445787] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 37.446066] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 37.446068] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 37.446082] NET: Registered protocol family 2 [ 37.485563] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 37.485658] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 37.487941] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 37.488943] TCP: Hash tables configured (established 131072 bind 65536) [ 37.488948] TCP reno registered [ 37.497706] checking if image is initramfs... it is [ 37.945191] Switched to high resolution mode on CPU 0 [ 38.066948] Freeing initrd memory: 7007k freed [ 38.067134] Simple Boot Flag at 0x35 set to 0x1 [ 38.067351] audit: initializing netlink socket (disabled) [ 38.067370] audit(1186400605.648:1): initialized [ 38.067447] highmem bounce pool size: 64 pages [ 38.068948] VFS: Disk quotas dquot_6.5.1 [ 38.068996] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 38.069124] io scheduler noop registered [ 38.069126] io scheduler anticipatory registered [ 38.069127] io scheduler deadline registered [ 38.069141] io scheduler cfq registered (default) [ 38.069210] Boot video device is 0000:01:00.0 [ 38.069390] isapnp: Scanning for PnP cards... [ 38.421972] isapnp: No Plug & Play device found [ 38.444399] Real Time Clock Driver v1.12ac [ 38.444517] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 38.445203] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 38.445383] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 38.445392] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 38.445850] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 38.446036] input: Macintosh mouse button emulation as /class/input/input0 [ 38.446104] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 38.452219] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.452224] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 38.452354] mice: PS/2 mouse device common for all mice [ 38.452443] EISA: Probing bus 0 at eisa.0 [ 38.452449] Cannot allocate resource for EISA slot 1 [ 38.452451] Cannot allocate resource for EISA slot 2 [ 38.452453] Cannot allocate resource for EISA slot 3 [ 38.452455] Cannot allocate resource for EISA slot 4 [ 38.452457] Cannot allocate resource for EISA slot 5 [ 38.452459] Cannot allocate resource for EISA slot 6 [ 38.452461] Cannot allocate resource for EISA slot 7 [ 38.452463] Cannot allocate resource for EISA slot 8 [ 38.452464] EISA: Detected 0 cards. [ 38.452559] TCP cubic registered [ 38.452574] NET: Registered protocol family 1 [ 38.452598] Using IPI No-Shortcut mode [ 38.452781] Magic number: 3:312:731 [ 38.453199] Freeing unused kernel memory: 364k freed [ 38.519223] input: AT Translated Set 2 keyboard as /class/input/input1 [ 39.611850] Capability LSM initialized [ 39.621463] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 39.621469] ACPI: Processor [CPU] (supports 8 throttling states) [ 39.622749] ACPI: Thermal Zone [THM0] (35 C) [ 39.961040] usbcore: registered new interface driver usbfs [ 39.961068] usbcore: registered new interface driver hub [ 39.961087] usbcore: registered new device driver usb [ 39.961805] USB Universal Host Controller Interface driver v3.0 [ 39.961870] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 39.961881] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 39.961885] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 39.962092] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 39.962116] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 39.962228] usb usb1: configuration #1 chosen from 1 choice [ 39.962246] hub 1-0:1.0: USB hub found [ 39.962252] hub 1-0:1.0: 2 ports detected [ 40.035327] SCSI subsystem initialized [ 40.039727] libata version 2.21 loaded. [ 40.063841] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 40.063846] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 40.063858] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 40.063861] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 40.063882] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 40.063905] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 40.063994] usb usb2: configuration #1 chosen from 1 choice [ 40.064014] hub 2-0:1.0: USB hub found [ 40.064019] hub 2-0:1.0: 2 ports detected [ 40.167848] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 40.167853] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 40.167864] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 40.167867] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 40.167892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 40.167915] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 40.168011] usb usb3: configuration #1 chosen from 1 choice [ 40.168032] hub 3-0:1.0: USB hub found [ 40.168038] hub 3-0:1.0: 2 ports detected [ 40.222351] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 40.222355] Copyright (c) 1999-2006 Intel Corporation. [ 40.246459] Floppy drive(s): fd0 is 1.44M [ 40.274526] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 40.274531] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 40.274544] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 40.274547] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 40.274577] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 40.274611] ehci_hcd 0000:00:1d.7: debug port 1 [ 40.274617] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 40.274623] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 40.278493] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 40.278569] usb usb4: configuration #1 chosen from 1 choice [ 40.278591] hub 4-0:1.0: USB hub found [ 40.278598] hub 4-0:1.0: 6 ports detected [ 40.304448] FDC 0 is a National Semiconductor PC87306 [ 3.092000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.112000] Time: acpi_pm clocksource has been installed. [ 3.112000] ata_piix 0000:00:1f.1: version 2.11 [ 3.112000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 3.112000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 3.112000] scsi0 : ata_piix [ 3.112000] scsi1 : ata_piix [ 3.112000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 3.112000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 3.276000] ata1.00: ATA-6: FUJITSU MHT2080AH, 006C, max UDMA/100 [ 3.276000] ata1.00: 156301488 sectors, multi 16: LBA [ 3.292000] ata1.00: configured for UDMA/100 [ 3.644000] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 3.768000] ata2.00: ATAPI: MATSHITADVD-RAM UJ-812, K104, max UDMA/33 [ 3.816000] usb 2-2: configuration #1 chosen from 1 choice [ 3.832000] usbcore: registered new interface driver hiddev [ 3.844000] input: Logitech Optical USB Mouse as /class/input/input2 [ 3.844000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2 [ 3.844000] usbcore: registered new interface driver usbhid [ 3.844000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.940000] ata2.00: configured for UDMA/33 [ 3.940000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 006C PQ: 0 ANSI: 5 [ 3.940000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-812 K104 PQ: 0 ANSI: 5 [ 3.940000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 3.952000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 3.952000] sd 0:0:0:0: [sda] Write Protect is off [ 3.952000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.952000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.952000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 3.952000] sd 0:0:0:0: [sda] Write Protect is off [ 3.952000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.952000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.952000] sda:<6>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:ff:fe:13 [ 4.228000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 4.308000] sda1 [ 4.308000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.312000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.312000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.324000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.324000] Uniform CD-ROM driver Revision: 3.20 [ 4.324000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 16.908000] end_request: I/O error, dev fd0, sector 0 [ 29.968000] end_request: I/O error, dev fd0, sector 0 [ 29.968000] Buffer I/O error on device fd0, logical block 0 [ 43.032000] end_request: I/O error, dev fd0, sector 0 [ 43.032000] Buffer I/O error on device fd0, logical block 0 [ 57.104000] end_request: I/O error, dev fd0, sector 0 [ 70.168000] end_request: I/O error, dev fd0, sector 0 [ 70.168000] Buffer I/O error on device fd0, logical block 0 [ 83.232000] end_request: I/O error, dev fd0, sector 0 [ 83.232000] Buffer I/O error on device fd0, logical block 0 [ 87.960000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 88.024000] ISO 9660 Extensions: RRIP_1991A [ 88.076000] Registering unionfs 1.4 [ 88.076000] unionfs: debugging is not enabled [ 88.084000] loop: module loaded [ 88.160000] squashfs: version 3.2-UBUNTU (2007/04/10) Phillip Lougher [ 134.352000] Linux agpgart interface v0.102 (c) Dave Jones [ 134.416000] [drm] Initialized drm 1.1.0 20060810 [ 134.472000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 134.472000] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 179.064000] agpgart: Detected an Intel 855PM Chipset. [ 179.076000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 179.264000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 179.296000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 179.380000] iTCO_vendor_support: vendor-support=0 [ 179.536000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 179.536000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 179.536000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 179.692000] intel_rng: FWH not detected [ 179.724000] ath_hal: module license 'Proprietary' taints kernel. [ 179.728000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 180.288000] wlan: 0.8.4.2 (0.9.3) [ 180.444000] ath_pci: 0.9.4.5 (0.9.3) [ 180.444000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 181.424000] input: PC Speaker as /class/input/input3 [ 181.432000] ath_rate_sample: 1.2 (0.9.3) [ 181.444000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 181.444000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 181.444000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 181.444000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 181.444000] wifi0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3 [ 181.444000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 181.444000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 181.444000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 181.444000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 181.444000] wifi0: Use hw queue 8 for CAB traffic [ 181.444000] wifi0: Use hw queue 9 for beacons [ 181.648000] wifi0: Atheros 5212: mem=0xc0210000, irq=11 [ 181.728000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552] [ 181.728000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 181.728000] Yenta: Routing CardBus interrupts to PCI [ 181.728000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64 [ 181.804000] irda_init() [ 181.804000] NET: Registered protocol family 23 [ 181.816000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 181.816000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 181.852000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 181.856000] parport_pc 00:0b: reported by Plug and Play ACPI [ 181.856000] parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 181.960000] Yenta: ISA IRQ mask 0x0438, PCI irq 11 [ 181.960000] Socket status: 30000086 [ 181.960000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 181.960000] cs: IO port probe 0x4000-0x8fff: clean. [ 181.960000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 181.960000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 181.992000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552] [ 181.996000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 181.996000] Yenta: Routing CardBus interrupts to PCI [ 181.996000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64 [ 182.164000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 182.164000] nsc-ircc, chip->init [ 182.164000] nsc-ircc, Found chip at base=0x02e [ 182.164000] nsc-ircc, driver loaded (Dag Brattli) [ 182.164000] IrDA: Registered device irda0 [ 182.164000] nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100 [ 182.216000] NET: Registered protocol family 17 [ 182.228000] Yenta: ISA IRQ mask 0x0430, PCI irq 11 [ 182.228000] Socket status: 30000086 [ 182.228000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 182.228000] cs: IO port probe 0x4000-0x8fff: clean. [ 182.228000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 182.228000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 182.912000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 182.912000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 183.328000] cs: IO port probe 0x100-0x3af: clean. [ 183.328000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 183.328000] cs: IO port probe 0x820-0x8ff: clean. [ 183.328000] cs: IO port probe 0xc00-0xcf7: clean. [ 183.328000] cs: IO port probe 0xa00-0xaff: clean. [ 183.332000] cs: IO port probe 0x100-0x3af: clean. [ 183.332000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 183.332000] cs: IO port probe 0x820-0x8ff: clean. [ 183.332000] cs: IO port probe 0xc00-0xcf7: clean. [ 183.332000] cs: IO port probe 0xa00-0xaff: clean. [ 183.844000] intel8x0_measure_ac97_clock: measured 55453 usecs [ 183.844000] intel8x0: clocking to 48000 [ 184.872000] fuse init (API version 7.8) [ 186.616000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 186.816000] input: TPPS/2 IBM TrackPoint as /class/input/input5 [ 191.280000] ACPI: AC Adapter [AC] (on-line) [ 191.336000] ACPI: Battery Slot [BAT0] (battery present) [ 191.364000] ACPI: ACPI Dock Station Driver [ 191.368000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 191.368000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 191.368000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 191.428000] input: Power Button (FF) as /class/input/input6 [ 191.432000] ACPI: Power Button (FF) [PWRF] [ 191.472000] input: Lid Switch as /class/input/input7 [ 191.472000] ACPI: Lid Switch [LID] [ 191.512000] input: Sleep Button (CM) as /class/input/input8 [ 191.516000] ACPI: Sleep Button (CM) [SLPB] [ 191.588000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 191.608000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 196.864000] lp0: using parport0 (interrupt-driven). [ 197.432000] ppdev: user-space parallel port driver [ 201.048000] [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held [ 201.048000] [drm:drm_unlock] *ERROR* Process 7502 using kernel context 0 [ 205.096000] IBM machine detected. Enabling interrupts during APM calls. [ 205.096000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 205.096000] apm: overridden by ACPI. [ 207.156000] Non-volatile memory driver v1.2 [ 207.460000] input: /usr/sbin/thinkpad-keys as /class/input/input9 [ 208.672000] Clocksource tsc unstable (delta = -221264828 ns) [ 216.636000] Bluetooth: Core ver 2.11 [ 216.636000] NET: Registered protocol family 31 [ 216.636000] Bluetooth: HCI device and connection manager initialized [ 216.636000] Bluetooth: HCI socket layer initialized [ 216.760000] Bluetooth: L2CAP ver 2.8 [ 216.760000] Bluetooth: L2CAP socket layer initialized [ 218.380000] NET: Registered protocol family 10 [ 218.380000] lo: Disabled Privacy Extensions [ 218.380000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 218.700000] Bluetooth: RFCOMM socket layer initialized [ 218.700000] Bluetooth: RFCOMM TTY layer initialized [ 218.700000] Bluetooth: RFCOMM ver 1.8 [ 228.400000] ath0: no IPv6 routers present [ 426.760000] usb 4-3: new high speed USB device using ehci_hcd and address 3 [ 426.916000] usb 4-3: configuration #1 chosen from 1 choice [ 431.440000] usbcore: registered new interface driver libusual [ 431.728000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 431.728000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 431.896000] Initializing USB Mass Storage driver... [ 431.900000] scsi2 : SCSI emulation for USB Mass Storage devices [ 431.904000] usb-storage: device found at 3 [ 431.904000] usb-storage: waiting for device to settle before scanning [ 431.904000] usbcore: registered new interface driver usb-storage [ 431.904000] USB Mass Storage support registered. [ 436.904000] usb-storage: device scan complete [ 436.904000] scsi 2:0:0:0: Direct-Access USB DISK 175X PMAP PQ: 0 ANSI: 0 CCS [ 437.236000] sd 2:0:0:0: [sdb] 1015808 512-byte hardware sectors (520 MB) [ 437.236000] sd 2:0:0:0: [sdb] Write Protect is off [ 437.236000] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 437.236000] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 437.240000] sd 2:0:0:0: [sdb] 1015808 512-byte hardware sectors (520 MB) [ 437.240000] sd 2:0:0:0: [sdb] Write Protect is off [ 437.240000] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 437.240000] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 437.240000] sdb: sdb1 [ 437.240000] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 437.240000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 492.856000] usb 4-3: USB disconnect, address 3 [ 492.856000] Buffer I/O error on device sdb1, logical block 1 [ 492.856000] lost page write due to I/O error on sdb1 [ 492.856000] Buffer I/O error on device sdb1, logical block 38 [ 492.856000] lost page write due to I/O error on sdb1 [ 492.856000] Buffer I/O error on device sdb1, logical block 1027 [ 492.856000] lost page write due to I/O error on sdb1 [ 492.856000] Buffer I/O error on device sdb1, logical block 2016 [ 492.856000] lost page write due to I/O error on sdb1 [ 724.472000] usb 4-3: new high speed USB device using ehci_hcd and address 4 [ 724.608000] usb 4-3: configuration #1 chosen from 1 choice [ 724.608000] scsi3 : SCSI emulation for USB Mass Storage devices [ 724.608000] usb-storage: device found at 4 [ 724.608000] usb-storage: waiting for device to settle before scanning [ 729.608000] usb-storage: device scan complete [ 729.608000] scsi 3:0:0:0: Direct-Access USB DISK 175X PMAP PQ: 0 ANSI: 0 CCS [ 729.940000] sd 3:0:0:0: [sdb] 1015808 512-byte hardware sectors (520 MB) [ 729.940000] sd 3:0:0:0: [sdb] Write Protect is off [ 729.940000] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 729.940000] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 729.944000] sd 3:0:0:0: [sdb] 1015808 512-byte hardware sectors (520 MB) [ 729.944000] sd 3:0:0:0: [sdb] Write Protect is off [ 729.944000] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 729.944000] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 729.944000] sdb: sdb1 [ 729.944000] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 729.944000] sd 3:0:0:0: Attached scsi generic sg2 type 0