[ 0.000000] Linux version 2.6.22-9-generic (buildd@palmer) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:50:37 GMT 2007 (Ubuntu 2.6.22-9.25-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec09000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 512MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7ef0 [ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131072 [ 0.000000] HighMem 131072 -> 131072 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131072 [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125984 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.0 present. [ 0.000000] ACPI: BIOS age (1998) fails cutoff (2000), acpi=force is required to enable ACPI [ 0.000000] ACPI: Disabling ACPI support [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] OEM ID: INTEL Product ID: PR440FX APIC at: 0xFEC08000 [ 0.000000] Processor #0 6:3 APIC version 17 [ 0.000000] Processor #12 6:3 APIC version 17 [ 0.000000] I/O APIC #13 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] Built 1 zonelists. Total pages: 130048 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper xforcevesa initrd=/casper/initrd.gz quiet splash -- noapic console-setup/layoutcode=de [ 0.000000] mapped APIC to ffffd000 (fec08000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 331.128 MHz processor. [ 88.079141] Console: colour VGA+ 80x25 [ 88.081698] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 88.083734] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 88.193479] Memory: 508308k/524288k available (2010k kernel code, 15452k reserved, 917k data, 364k init, 0k highmem) [ 88.193546] virtual kernel memory layout: [ 88.193554] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 88.193564] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 88.193573] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 88.193582] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 88.193590] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 88.193599] .data : 0xc02f6806 - 0xc03dbe64 ( 917 kB) [ 88.193608] .text : 0xc0100000 - 0xc02f6806 (2010 kB) [ 88.193629] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 88.193858] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 88.273911] Calibrating delay using timer specific routine.. 663.19 BogoMIPS (lpj=1326389) [ 88.274065] Security Framework v1.0.0 initialized [ 88.274118] SELinux: Disabled at boot. [ 88.274219] Mount-cache hash table entries: 512 [ 88.274934] CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 88.274999] CPU: L1 I cache: 16K, L1 D cache: 16K [ 88.275016] CPU: L2 cache: 512K [ 88.275035] CPU: After all inits, caps: 0183f3ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 88.275094] Compat vDSO mapped to ffffe000. [ 88.275168] Checking 'hlt' instruction... OK. [ 88.290064] SMP alternatives: switching to UP code [ 88.292347] Early unpacking initramfs... done [ 90.276007] CPU0: Intel Pentium II (Klamath) stepping 02 [ 90.276168] SMP alternatives: switching to SMP code [ 90.277150] Booting processor 1/12 eip 3000 [ 90.287962] Initializing CPU#1 [ 90.365584] Calibrating delay using timer specific routine.. 662.30 BogoMIPS (lpj=1324613) [ 90.365618] CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 90.365668] CPU: L1 I cache: 16K, L1 D cache: 16K [ 90.365681] CPU: L2 cache: 512K [ 90.365698] CPU: After all inits, caps: 0183f3ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 90.367090] CPU1: Intel Pentium II (Klamath) stepping 02 [ 90.367191] Total of 2 processors activated (1325.50 BogoMIPS). [ 90.582275] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 90.602391] Brought up 2 CPUs [ 91.836147] migration_cost=12152 [ 91.837030] Booting paravirtualized kernel on bare hardware [ 91.837329] Time: 15:40:18 Date: 07/06/107 [ 91.837495] NET: Registered protocol family 16 [ 91.838042] EISA bus registered [ 91.853358] PCI: PCI BIOS revision 2.10 entry at 0xfda11, last bus=0 [ 91.853375] PCI: Using configuration type 1 [ 91.853399] Setting up standard PCI resources [ 91.887128] ACPI: Interpreter disabled. [ 91.887153] Linux Plug and Play Support v0.97 (c) Adam Belay [ 91.887206] pnp: PnP ACPI: disabled [ 91.887230] PnPBIOS: Scanning system for PnP BIOS support... [ 91.887309] PnPBIOS: Found PnP BIOS installation structure at 0xc00fa000 [ 91.887330] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa100, dseg 0x400 [ 91.891940] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver [ 91.892275] PCI: Probing PCI hardware [ 91.892374] PCI: Probing PCI hardware (bus 00) [ 91.892829] PCI: Firmware left 0000:00:06.0 e100 interrupts enabled, disabling [ 91.897961] NET: Registered protocol family 8 [ 91.897977] NET: Registered protocol family 20 [ 91.898371] pnp: 00:08: iomem range 0xe8000-0xfffff could not be reserved [ 91.898394] pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved [ 91.898416] pnp: 00:08: iomem range 0x100000-0x1fffffff could not be reserved [ 91.898439] pnp: 00:08: iomem range 0xffe80000-0xffffffff could not be reserved [ 91.898504] pnp: 00:0f: ioport range 0x290-0x297 has been reserved [ 91.900772] NET: Registered protocol family 2 [ 91.901387] Time: tsc clocksource has been installed. [ 91.937714] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 91.938449] TCP established hash table entries: 65536 (order: 7, 786432 bytes) [ 91.946899] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 91.953993] TCP: Hash tables configured (established 65536 bind 65536) [ 91.954022] TCP reno registered [ 91.966590] checking if image is initramfs... it is [ 95.755827] Freeing initrd memory: 7047k freed [ 95.758622] audit: initializing netlink socket (disabled) [ 95.758715] audit(1186414821.088:1): initialized [ 95.775277] VFS: Disk quotas dquot_6.5.1 [ 95.775746] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 95.776910] io scheduler noop registered [ 95.776928] io scheduler anticipatory registered [ 95.776942] io scheduler deadline registered [ 95.777088] io scheduler cfq registered (default) [ 95.777142] Limiting direct PCI/PCI transfers. [ 95.777186] Activating ISA DMA hang workarounds. [ 95.777241] Boot video device is 0000:00:0b.0 [ 95.778385] isapnp: Scanning for PnP cards... [ 95.889113] isapnp: Card 'CS4236B Audio' [ 95.889130] isapnp: 1 Plug & Play card detected total [ 96.087508] Real Time Clock Driver v1.12ac [ 96.088028] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 96.092291] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 96.093584] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 96.095223] 0000:00:0f.0: ttyS2 at I/O 0xfff0 (irq = 10) is a 16550A [ 96.100081] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 96.101239] input: Macintosh mouse button emulation as /class/input/input0 [ 96.101875] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 96.105148] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 96.105181] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 96.106388] mice: PS/2 mouse device common for all mice [ 96.107144] EISA: Probing bus 0 at eisa.0 [ 96.107256] EISA: Detected 0 cards. [ 96.107962] TCP cubic registered [ 96.108058] NET: Registered protocol family 1 [ 96.108222] Using IPI No-Shortcut mode [ 96.109048] Magic number: 3:186:689 [ 96.112200] Freeing unused kernel memory: 364k freed [ 96.128771] input: AT Translated Set 2 keyboard as /class/input/input1 [ 98.461354] AppArmor: AppArmor initialized [ 98.461401] audit(1186414824.088:2): AppArmor initialized [ 98.461410] [ 98.498646] AppArmor: Registered secondary security module: capability. [ 98.498673] Capability LSM initialized as secondary [ 98.622662] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 101.255175] usbcore: registered new interface driver usbfs [ 101.255352] usbcore: registered new interface driver hub [ 101.255512] usbcore: registered new device driver usb [ 101.265031] USB Universal Host Controller Interface driver v3.0 [ 101.265428] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 101.266070] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 101.266157] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000ff80 [ 101.266910] usb usb1: configuration #1 chosen from 1 choice [ 101.267076] hub 1-0:1.0: USB hub found [ 101.267121] hub 1-0:1.0: 2 ports detected [ 101.561504] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 101.561542] e100: Copyright(c) 1999-2006 Intel Corporation [ 101.629703] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 101.632068] SCSI subsystem initialized [ 101.707011] libata version 2.21 loaded. [ 101.746965] ata_piix 0000:00:07.1: version 2.11 [ 101.747968] scsi0 : ata_piix [ 101.748258] scsi1 : ata_piix [ 101.748430] ata1: PATA max MWDMA2 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 101.748455] ata2: PATA max MWDMA2 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 101.825716] usb 1-1: configuration #1 chosen from 1 choice [ 101.901704] Floppy drive(s): fd0 is 1.44M [ 102.023150] FDC 0 is a National Semiconductor PC87306 [ 102.060260] ata1.00: ATAPI: SONY DVD-ROM DDU1612, DYS3, max UDMA/33 [ 102.216078] ata1.00: configured for MWDMA2 [ 102.373834] scsi 0:0:0:0: CD-ROM SONY DVD-ROM DDU1612 DYS3 PQ: 0 ANSI: 5 [ 102.448346] usbcore: registered new interface driver libusual [ 102.500534] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray [ 102.500575] Uniform CD-ROM driver Revision: 3.20 [ 102.500988] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 102.557114] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 102.557174] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 102.586501] Initializing USB Mass Storage driver... [ 102.592031] scsi3 : SCSI emulation for USB Mass Storage devices [ 102.604266] usb-storage: device found at 2 [ 102.604290] usbcore: registered new interface driver usb-storage [ 102.604320] usb-storage: waiting for device to settle before scanning [ 102.604340] USB Mass Storage support registered. [ 102.605254] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 103.359436] end_request: I/O error, dev fd0, sector 0 [ 103.805700] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 103.842518] ISO 9660 Extensions: RRIP_1991A [ 103.925305] Registering unionfs 1.4 [ 103.925334] unionfs: debugging is not enabled [ 103.990434] loop: module loaded [ 107.604239] usb-storage: device scan complete [ 107.607245] scsi 3:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS [ 107.614938] scsi 3:0:0:0: Attached scsi generic sg1 type 0 [ 107.678055] sd 3:0:0:0: [sda] 1966080 512-byte hardware sectors (1007 MB) [ 107.681016] sd 3:0:0:0: [sda] Write Protect is off [ 107.681037] sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 107.681052] sd 3:0:0:0: [sda] Assuming drive cache: write through [ 107.693024] sd 3:0:0:0: [sda] 1966080 512-byte hardware sectors (1007 MB) [ 107.696010] sd 3:0:0:0: [sda] Write Protect is off [ 107.696030] sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 107.696045] sd 3:0:0:0: [sda] Assuming drive cache: write through [ 107.696073] sda: sda1 [ 107.702509] sd 3:0:0:0: [sda] Attached SCSI removable disk [ 117.393040] scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 117.393056] [ 117.393066] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs [ 117.393076] [ 117.396934] scsi 2:0:0:0: Direct-Access QUANTUM ATLAS10K3_36_WLS 020K PQ: 0 ANSI: 3 [ 117.397020] scsi2:A:0:0: Tagged Queuing enabled. Depth 8 [ 117.397167] target2:0:0: Beginning Domain Validation [ 117.414956] target2:0:0: wide asynchronous [ 117.416410] target2:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) [ 117.417329] target2:0:0: Domain Validation skipping write tests [ 117.417348] target2:0:0: Ending Domain Validation [ 117.422439] e100: eth0: e100_probe: addr 0xffbed000, irq 11, MAC addr 00:A0:C9:49:74:68 [ 117.572299] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 121.105459] sd 2:0:0:0: [sdb] 71833096 512-byte hardware sectors (36779 MB) [ 121.106989] sd 2:0:0:0: [sdb] Write Protect is off [ 121.107011] sd 2:0:0:0: [sdb] Mode Sense: e5 00 10 08 [ 121.108619] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 121.109184] sd 2:0:0:0: [sdb] 71833096 512-byte hardware sectors (36779 MB) [ 121.110750] sd 2:0:0:0: [sdb] Write Protect is off [ 121.110774] sd 2:0:0:0: [sdb] Mode Sense: e5 00 10 08 [ 121.112118] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 121.112155] sdb: sdb1 sdb2 sdb3 [ 121.113289] sd 2:0:0:0: [sdb] Attached SCSI disk [ 121.113530] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 240.136933] NET: Registered protocol family 17 [ 244.903350] acx: Loaded combined PCI/USB driver, firmware_ver=default [ 245.386072] input: PC Speaker as /class/input/input2 [ 246.176186] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3 [ 246.577202] pnp: Device 01:01.01 activated. [ 246.594678] gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x200, speed 764kHz [ 246.743026] parport_pc 00:0b: reported by Plug and Play BIOS [ 246.743119] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 246.747290] parport0: Printer, Hewlett-Packard HP LaserJet 4000 Series [ 248.851691] pnp: Device 01:01.00 activated. [ 248.854410] pnp: Device 01:01.00 disabled. [ 248.854436] cs4232-pnpbios: probe of 01:01.00 failed with error -2 [ 249.810269] fuse init (API version 7.8) [ 251.285875] AppArmor: Unregistered secondary security module: capability [ 268.777966] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm [ 268.778472] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance [ 268.779957] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance [ 268.780636] acpi_cpufreq: Unknown symbol acpi_processor_register_performance [ 275.976317] lp0: using parport0 (interrupt-driven). [ 276.105347] ppdev: user-space parallel port driver [ 280.320226] apm: BIOS not found. [ 281.068188] AppArmor: Registered secondary security module: capability. [ 281.068239] Capability LSM initialized as secondary [ 281.986450] Bluetooth: Core ver 2.11 [ 281.986962] NET: Registered protocol family 31 [ 281.986978] Bluetooth: HCI device and connection manager initialized [ 281.987002] Bluetooth: HCI socket layer initialized [ 282.088173] Bluetooth: L2CAP ver 2.8 [ 282.088219] Bluetooth: L2CAP socket layer initialized [ 282.137464] Bluetooth: RFCOMM socket layer initialized [ 282.138130] Bluetooth: RFCOMM TTY layer initialized [ 282.138149] Bluetooth: RFCOMM ver 1.8 [ 284.471443] NET: Registered protocol family 10 [ 284.472959] lo: Disabled Privacy Extensions [ 284.473798] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 443.208890] acx: Loaded combined PCI/USB driver, firmware_ver=default [ 560.481291] Linux agpgart interface v0.102 (c) Dave Jones [ 560.568287] [drm] Initialized drm 1.1.0 20060810 [ 560.635789] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 563.697190] [drm] Setting GART location based on new memory map [ 563.701099] [drm] writeback test succeeded in 1 usecs [ 657.655149] mtrr: no MTRR for f8000000,2000000 found [ 695.480904] [drm] Setting GART location based on new memory map [ 695.484652] [drm] writeback test succeeded in 1 usecs