[ 0.000000] Linux version 2.6.22-14-generic (buildd@vernadsky) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 06:00:47 GMT 2007 (Ubuntu 2.6.22-14.43-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable) [ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 119MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4dc0 [ 0.000000] Entering add_active_range(0, 0, 260080) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 260080 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 260080 [ 0.000000] On node 0 totalpages: 260080 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 239 pages used for memmap [ 0.000000] HighMem zone: 30465 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6C30 checksum 0 [ 0.000000] ACPI: RSDP 000F6C30, 0014 (r0 IntelR) [ 0.000000] ACPI: RSDT 3F7F3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3F7F3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3F7F30C0, 4310 (r1 INTELR AWRDACPI 1000 MSFT 100000D) [ 0.000000] ACPI: FACS 3F7F0000, 0040 [ 0.000000] ACPI: APIC 3F7F7400, 0054 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:2 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000) [ 0.000000] Built 1 zonelists. Total pages: 258049 [ 0.000000] Kernel command line: root=UUID=6f808f3b-d0dc-4255-a9f4-493d9d6ec510 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2000.052 MHz processor. [ 25.022576] Console: colour VGA+ 80x25 [ 25.023603] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 25.024665] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 25.064086] Memory: 1019704k/1040320k available (2015k kernel code, 19860k reserved, 916k data, 364k init, 122816k highmem) [ 25.064103] virtual kernel memory layout: [ 25.064104] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 25.064105] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 25.064107] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 25.064110] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 25.064112] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 25.064113] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 25.064115] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 25.064119] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 25.064192] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 25.144079] Calibrating delay using timer specific routine.. 4004.05 BogoMIPS (lpj=8008105) [ 25.144136] Security Framework v1.0.0 initialized [ 25.144153] SELinux: Disabled at boot. [ 25.144173] Mount-cache hash table entries: 512 [ 25.144455] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 25.144474] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 25.144478] CPU: L2 cache: 512K [ 25.144482] CPU: Hyper-Threading is disabled [ 25.144485] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00000000 00000000 00000000 [ 25.144507] Compat vDSO mapped to ffffe000. [ 25.144532] Checking 'hlt' instruction... OK. [ 25.160275] SMP alternatives: switching to UP code [ 25.160721] Freeing SMP alternatives: 11k freed [ 25.161129] Early unpacking initramfs... done [ 25.560969] ACPI: Core revision 20070126 [ 25.561053] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.688766] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 07 [ 25.688820] Total of 1 processors activated (4004.05 BogoMIPS). [ 25.688966] ENABLING IO-APIC IRQs [ 25.689177] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 25.834845] Brought up 1 CPUs [ 25.835018] Booting paravirtualized kernel on bare hardware [ 25.835106] Time: 6:14:55 Date: 09/13/107 [ 25.835140] NET: Registered protocol family 16 [ 25.835280] EISA bus registered [ 25.835297] ACPI: bus type pci registered [ 25.860590] PCI: PCI BIOS revision 2.10 entry at 0xfa950, last bus=1 [ 25.860593] PCI: Using configuration type 1 [ 25.860595] Setting up standard PCI resources [ 25.872505] ACPI: EC: Look up EC in DSDT [ 25.877457] ACPI: Interpreter enabled [ 25.877463] ACPI: (supports S0 S3 S4 S5) [ 25.877492] ACPI: Using IOAPIC for interrupt routing [ 25.884961] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.884973] PCI: Probing PCI hardware (bus 00) [ 25.885490] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 25.885492] * this clock source is slow. If you are sure your timer does not have [ 25.885494] * this bug, please use "acpi_pm_good" to disable the workaround [ 25.885548] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 25.885553] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 25.885881] PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling [ 25.885965] PCI: Transparent bridge - 0000:00:1e.0 [ 25.885996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.886207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 25.909883] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 25.910045] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 25.910204] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 25.910363] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 25.910522] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 25.910689] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 25.910849] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 25.911008] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 25.911154] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.911176] pnp: PnP ACPI init [ 25.911189] ACPI: bus type pnp registered [ 25.916155] pnp: PnP ACPI: found 17 devices [ 25.916159] ACPI: ACPI bus type pnp unregistered [ 25.916165] PnPBIOS: Disabled by ACPI PNP [ 25.916248] PCI: Using ACPI for IRQ routing [ 25.916252] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.927843] NET: Registered protocol family 8 [ 25.927847] NET: Registered protocol family 20 [ 25.927949] pnp: 00:00: iomem range 0xcc000-0xcffff has been reserved [ 25.927953] pnp: 00:00: iomem range 0xd5800-0xd7fff has been reserved [ 25.927957] pnp: 00:00: iomem range 0xf0000-0xfbfff could not be reserved [ 25.927961] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 25.927971] pnp: 00:03: ioport range 0x400-0x4bf could not be reserved [ 25.930615] Time: tsc clocksource has been installed. [ 25.958394] PCI: Bridge: 0000:00:1e.0 [ 25.958399] IO window: c000-cfff [ 25.958406] MEM window: e0000000-e3ffffff [ 25.958412] PREFETCH window: e4000000-e4ffffff [ 25.958430] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 25.958446] NET: Registered protocol family 2 [ 25.994575] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.994823] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 25.997210] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 25.998151] TCP: Hash tables configured (established 131072 bind 65536) [ 25.998160] TCP reno registered [ 26.006752] checking if image is initramfs... it is [ 26.457629] Switched to high resolution mode on CPU 0 [ 26.793446] Freeing initrd memory: 7057k freed [ 26.794042] audit: initializing netlink socket (disabled) [ 26.794068] audit(1192256095.144:1): initialized [ 26.794203] highmem bounce pool size: 64 pages [ 26.797097] VFS: Disk quotas dquot_6.5.1 [ 26.797176] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 26.797338] io scheduler noop registered [ 26.797342] io scheduler anticipatory registered [ 26.797344] io scheduler deadline registered [ 26.797365] io scheduler cfq registered (default) [ 26.797391] Boot video device is 0000:00:02.0 [ 26.797680] isapnp: Scanning for PnP cards... [ 27.151327] isapnp: No Plug & Play device found [ 27.188702] Real Time Clock Driver v1.12ac [ 27.188840] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.188956] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 27.189228] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 27.190124] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 27.190524] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 27.191659] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.191990] input: Macintosh mouse button emulation as /class/input/input0 [ 27.192186] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 27.196151] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 27.196161] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 27.196446] mice: PS/2 mouse device common for all mice [ 27.196617] EISA: Probing bus 0 at eisa.0 [ 27.196661] EISA: Detected 0 cards. [ 27.196812] TCP cubic registered [ 27.196829] NET: Registered protocol family 1 [ 27.196861] Using IPI No-Shortcut mode [ 27.197077] Magic number: 11:801:215 [ 27.197940] Freeing unused kernel memory: 364k freed [ 27.236118] input: AT Translated Set 2 keyboard as /class/input/input1 [ 28.502410] AppArmor: AppArmor initialized<5>audit(1192256097.144:2): type=1505 info="AppArmor initialized" pid=1185 [ 28.514747] fuse init (API version 7.8) [ 28.521995] Failure registering capabilities with primary security module. [ 28.541184] ACPI: Processor [CPU0] (supports 2 throttling states) [ 28.597529] ACPI: Thermal Zone [THRM] (36 C) [ 28.645400] ACPI: Thermal Zone [THM1] (33 C) [ 29.488241] usbcore: registered new interface driver usbfs [ 29.488278] usbcore: registered new interface driver hub [ 29.488316] usbcore: registered new device driver usb [ 29.489690] USB Universal Host Controller Interface driver v3.0 [ 29.489786] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 29.489803] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 29.489808] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 29.490046] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 29.490080] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800 [ 29.490256] usb usb1: configuration #1 chosen from 1 choice [ 29.490293] hub 1-0:1.0: USB hub found [ 29.490305] hub 1-0:1.0: 2 ports detected [ 29.591557] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 29.591575] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 29.591580] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 29.591618] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 29.591652] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d000 [ 29.591789] usb usb2: configuration #1 chosen from 1 choice [ 29.591835] hub 2-0:1.0: USB hub found [ 29.591846] hub 2-0:1.0: 2 ports detected [ 29.605754] SCSI subsystem initialized [ 29.613422] libata version 2.21 loaded. [ 29.649690] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 29.649695] e100: Copyright(c) 1999-2006 Intel Corporation [ 29.695375] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 29.695394] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 29.695399] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 29.695433] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 29.695466] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400 [ 29.695611] usb usb3: configuration #1 chosen from 1 choice [ 29.695648] hub 3-0:1.0: USB hub found [ 29.695661] hub 3-0:1.0: 2 ports detected [ 29.799586] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 29.799607] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 29.799612] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 29.799654] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 29.799707] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 29.799724] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe5080000 [ 29.803589] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.803709] usb usb4: configuration #1 chosen from 1 choice [ 29.803749] hub 4-0:1.0: USB hub found [ 29.803762] hub 4-0:1.0: 6 ports detected [ 29.875740] FDC 0 is a post-1991 82077 [ 29.909999] ata_piix 0000:00:1f.1: version 2.11 [ 29.910025] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 29.910087] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 29.910208] scsi0 : ata_piix [ 29.910268] scsi1 : ata_piix [ 29.910414] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 29.910418] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 30.198155] usb 4-5: new high speed USB device using ehci_hcd and address 2 [ 30.246449] ata1.00: ATA-6: ST3120022A, 8.54, max UDMA/100 [ 30.246454] ata1.00: 234441648 sectors, multi 16: LBA48 [ 30.246461] ata1.01: ATA-4: FUJITSU MPE3084AE, EE-C0-24, max UDMA/66 [ 30.246464] ata1.01: 16514064 sectors, multi 16: LBA [ 30.246473] ata1.01: limited to UDMA/33 due to 40-wire cable [ 30.262439] ata1.00: configured for UDMA/100 [ 30.278194] ata1.01: configured for UDMA/33 [ 30.330886] usb 4-5: configuration #1 chosen from 1 choice [ 30.348471] usbcore: registered new interface driver libusual [ 30.358286] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 30.358294] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 30.362372] Initializing USB Mass Storage driver... [ 30.362462] scsi2 : SCSI emulation for USB Mass Storage devices [ 30.362526] usb-storage: device found at 2 [ 30.362529] usb-storage: waiting for device to settle before scanning [ 30.362549] usbcore: registered new interface driver usb-storage [ 30.362553] USB Mass Storage support registered. [ 30.761481] ata2.00: ATAPI: BENQ DVD DD DW1640, BSHB, max UDMA/33 [ 30.761491] ata2.01: ATAPI: LS-120 COSM 04 UHD Floppy, 0270M09T, max PIO2 [ 30.933158] ata2.00: configured for UDMA/33 [ 31.104624] ata2.01: configured for PIO2 [ 31.104798] scsi 0:0:0:0: Direct-Access ATA ST3120022A 8.54 PQ: 0 ANSI: 5 [ 31.105406] scsi 0:0:1:0: Direct-Access ATA FUJITSU MPE3084A EE-C PQ: 0 ANSI: 5 [ 31.107877] scsi 1:0:0:0: CD-ROM BENQ DVD DD DW1640 BSHB PQ: 0 ANSI: 5 [ 31.118640] scsi 1:0:1:0: Direct-Access MATSHITA LS-120 COSM 04 0270 PQ: 0 ANSI: 5 [ 31.119229] ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 31.144609] e100: eth0: e100_probe: addr 0xe3000000, irq 20, MAC addr 00:00:E2:74:4D:B1 [ 31.167141] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 31.167186] sd 0:0:0:0: [sda] Write Protect is off [ 31.167190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.167215] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.167307] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 31.167322] sd 0:0:0:0: [sda] Write Protect is off [ 31.167325] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.167348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.167356] sda: sda1 sda2 sda3 sda4 < sda5 > [ 31.224096] sd 0:0:0:0: [sda] Attached SCSI disk [ 31.225236] sd 0:0:1:0: [sdb] 16514064 512-byte hardware sectors (8455 MB) [ 31.225256] sd 0:0:1:0: [sdb] Write Protect is off [ 31.225260] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 31.225285] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.225359] sd 0:0:1:0: [sdb] 16514064 512-byte hardware sectors (8455 MB) [ 31.225374] sd 0:0:1:0: [sdb] Write Protect is off [ 31.225377] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 31.225400] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.225405] sdb: sdb1 sdb2 < sdb5 > [ 31.631305] sd 0:0:1:0: [sdb] Attached SCSI disk [ 31.637254] sd 1:0:1:0: [sdc] Attached SCSI removable disk [ 31.643336] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 31.643366] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 31.643393] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 31.643420] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 31.690193] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 31.690202] Uniform CD-ROM driver Revision: 3.20 [ 31.690286] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 32.354845] Attempting manual resume [ 32.354851] swsusp: Resume From Partition 8:18 [ 32.354853] PM: Checking swsusp image. [ 32.354886] attempt to access beyond end of device [ 32.354891] sdb2: rw=16, want=8, limit=2 [ 32.354894] Read-error on swap-device (8:18:8) [ 32.354900] PM: Resume from disk failed. [ 32.393356] kjournald starting. Commit interval 5 seconds [ 32.393373] EXT3-fs: mounted filesystem with ordered data mode. [ 35.352201] usb-storage: device scan complete [ 35.352933] scsi 2:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 35.354402] sd 2:0:0:0: [sdd] 7999487 512-byte hardware sectors (4096 MB) [ 35.355276] sd 2:0:0:0: [sdd] Write Protect is off [ 35.355280] sd 2:0:0:0: [sdd] Mode Sense: 64 00 00 08 [ 35.355283] sd 2:0:0:0: [sdd] Assuming drive cache: write through [ 35.356896] sd 2:0:0:0: [sdd] 7999487 512-byte hardware sectors (4096 MB) [ 35.357896] sd 2:0:0:0: [sdd] Write Protect is off [ 35.357900] sd 2:0:0:0: [sdd] Mode Sense: 64 00 00 08 [ 35.357902] sd 2:0:0:0: [sdd] Assuming drive cache: write through [ 35.357909] sdd: sdd1 sdd2 [ 36.316062] sd 2:0:0:0: [sdd] Attached SCSI removable disk [ 36.316124] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 45.509617] Linux agpgart interface v0.102 (c) Dave Jones [ 45.559898] i810_smbus 0000:00:02.0: i810/i815 i2c device found. [ 45.643203] iTCO_vendor_support: vendor-support=0 [ 45.644728] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 45.644828] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) [ 45.644892] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 45.667632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 45.691807] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 45.703754] agpgart: Detected an Intel 830M Chipset. [ 45.703891] agpgart: Detected 8060K stolen memory. [ 45.721245] agpgart: AGP aperture is 128M @ 0xd8000000 [ 45.776515] intel_rng: FWH not detected [ 47.016323] input: PC Speaker as /class/input/input2 [ 47.260583] parport_pc 00:0c: reported by Plug and Play ACPI [ 47.260613] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [ 47.850320] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21 [ 47.850356] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 47.966885] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 [ 48.170410] intel8x0_measure_ac97_clock: measured 54839 usecs [ 48.170415] intel8x0: clocking to 48000 [ 48.735127] lp0: using parport0 (interrupt-driven). [ 48.806534] Adding 449812k swap on /dev/sda2. Priority:-1 extents:1 across:449812k [ 49.244474] EXT3 FS on sda3, internal journal [ 49.808536] kjournald starting. Commit interval 5 seconds [ 49.808740] EXT3 FS on sda5, internal journal [ 49.808747] EXT3-fs: mounted filesystem with ordered data mode. [ 53.607710] input: Power Button (FF) as /class/input/input4 [ 53.613888] ACPI: Power Button (FF) [PWRF] [ 53.662713] input: Power Button (CM) as /class/input/input5 [ 53.668799] ACPI: Power Button (CM) [PWRB] [ 53.723597] No dock devices found. [ 55.400429] ppdev: user-space parallel port driver [ 55.487966] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 55.999949] audit(1192220125.284:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4787 profile="/usr/sbin/cupsd" [ 56.147264] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 56.147271] apm: overridden by ACPI. [ 56.489235] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 56.576416] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 56.585760] NFSD: starting 90-second grace period [ 57.961005] Failure registering capabilities with primary security module. [ 58.622131] Bluetooth: Core ver 2.11 [ 58.622306] NET: Registered protocol family 31 [ 58.622309] Bluetooth: HCI device and connection manager initialized [ 58.622314] Bluetooth: HCI socket layer initialized [ 58.650127] Bluetooth: L2CAP ver 2.8 [ 58.650133] Bluetooth: L2CAP socket layer initialized [ 58.751317] Bluetooth: RFCOMM socket layer initialized [ 58.751464] Bluetooth: RFCOMM TTY layer initialized [ 58.751469] Bluetooth: RFCOMM ver 1.8 [ 62.206693] vmmon: module license 'unspecified' taints kernel. [ 62.215488] /dev/vmmon[5431]: VMCI: Driver initialized. [ 62.219511] /dev/vmmon[5431]: Module vmmon: registered with major=10 minor=165 [ 62.219567] /dev/vmmon[5431]: Module vmmon: initialized [ 63.075320] NET: Registered protocol family 17 [ 63.524712] /dev/vmnet: open called by PID 5504 (vmnet-bridge) [ 63.525196] /dev/vmnet: hub 0 does not exist, allocating memory. [ 63.525434] /dev/vmnet: port on hub 0 successfully opened [ 63.525647] bridge-eth0: enabling the bridge [ 63.525826] bridge-eth0: up [ 63.525975] bridge-eth0: already up [ 63.525981] bridge-eth0: attached [ 64.867234] NET: Registered protocol family 10 [ 64.867497] lo: Disabled Privacy Extensions [ 75.775657] eth0: no IPv6 routers present