No sound card in Gutsy with D630
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Incomplete
|
Undecided
|
Unassigned | ||
linux-source-2.6.22 (Ubuntu) |
Won't Fix
|
Medium
|
Ubuntu Audio Team |
Bug Description
tail -2 /proc/asound/
Mixers: NOT ENABLED IN CONFIG
amixer
amixer: Mixer attach default error: No such device
lspci -nv
00:00.0 0600: 8086:2a00 (rev 0c)
Subsystem: 1028:01f9
Flags: bus master, fast devsel, latency 0
00:02.0 0300: 8086:2a02 (rev 0c) (prog-if 00 [VGA])
Subsystem: 1028:01f9
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at efe8 [size=8]
00:02.1 0380: 8086:2a03 (rev 0c)
Subsystem: 1028:01f9
Flags: bus master, fast devsel, latency 0
Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 6f20 [size=32]
00:1a.1 0c03: 8086:2835 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 6f00 [size=32]
00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20 [EHCI])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
00:1b.0 0403: 8086:284b (rev 02)
Subsystem: 1028:01f9
Flags: fast devsel, IRQ 21
Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
00:1c.0 0604: 8086:283f (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
00:1c.1 0604: 8086:2841 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: fe800000-fe8fffff
00:1c.5 0604: 8086:2849 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
00:1d.0 0c03: 8086:2830 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 6f80 [size=32]
00:1d.1 0c03: 8086:2831 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 6f60 [size=32]
00:1d.2 0c03: 8086:2832 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 6f40 [size=32]
00:1d.7 0c03: 8086:2836 (rev 02) (prog-if 20 [EHCI])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
00:1e.0 0604: 8086:2448 (rev f2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe600000-fe6fffff
00:1f.0 0601: 8086:2815 (rev 02)
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0
00:1f.1 0101: 8086:2850 (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 6fa0 [size=16]
00:1f.2 0101: 8086:2828 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: 1028:01f9
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at 6eb0 [size=8]
I/O ports at 6eb8 [size=4]
I/O ports at 6ec0 [size=8]
I/O ports at 6ec8 [size=4]
I/O ports at 6ee0 [size=16]
I/O ports at eff0 [size=16]
00:1f.3 0c05: 8086:283e (rev 02)
Subsystem: 1028:01f9
Flags: medium devsel, IRQ 10
Memory at fe9fbf00 (32-bit, non-prefetchable) [size=256]
I/O ports at 10c0 [size=32]
03:01.0 0607: 1217:7135 (rev 21)
Subsystem: 1028:01f9
Flags: bus master, stepping, slow devsel, latency 168, IRQ 18
Memory at fe600000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 70000000-73fff000 (prefetchable)
Memory window 1: 74000000-77fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
16-bit legacy interface ports at 0001
03:01.4 0c00: 1217:00f7 (rev 02) (prog-if 10 [OHCI])
Subsystem: 1028:01f9
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K]
Memory at fe6fe800 (32-bit, non-prefetchable) [size=2K]
09:00.0 0200: 14e4:1673 (rev 02)
Subsystem: 1028:01f9
Flags: bus master, fast devsel, latency 0, IRQ 220
Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
0c:00.0 0280: 8086:4222 (rev 02)
Subsystem: 8086:1022
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
asoundconf list
Names of available sound cards:
cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /home/bond007/
dmesg
[ 0.000000] Linux version 2.6.22-7-generic (buildd@rothera) (gcc version 4.1.3 20070601 (prerelease) (Ubuntu 4.1.2-12ubuntu1)) #1 SMP Mon Jun 25 17:33:14 GMT 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005f680400 (usable)
[ 0.000000] BIOS-e820: 000000005f680400 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 630MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 390784) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 390784
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 390784
[ 0.000000] On node 0 totalpages: 390784
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1261 pages used for memmap
[ 0.000000] HighMem zone: 160147 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FBB00, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 5F681E00, 0064 (r1 DELL M08 27D70512 ASL 61)
[ 0.000000] ACPI: FACP 5F681C9C, 00F4 (r4 DELL M08 27D70512 ASL 61)
[ 0.000000] ACPI: DSDT 5F682400, 6122 (r2 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS 5F690C00, 0040
[ 0.000000] ACPI: HPET 5F681F00, 0038 (r1 DELL M08 1 ASL 61)
[ 0.000000] ACPI: APIC 5F682000, 0068 (r1 DELL M08 27D70512 ASL 47)
[ 0.000000] ACPI: ASF! 5F681C00, 007E (r32 DELL M08 27D70512 ASL 61)
[ 0.000000] ACPI: MCFG 5F681FC0, 003E (r16 DELL M08 27D70512 ASL 61)
[ 0.000000] ACPI: SLIC 5F68209C, 0176 (r1 DELL M08 27D70512 ASL 61)
[ 0.000000] ACPI: TCPA 5F682300, 0032 (r1 0 ASL 0)
[ 0.000000] ACPI: SSDT 5F680731, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:98000000)
[ 0.000000] Built 1 zonelists. Total pages: 387731
[ 0.000000] Kernel command line: root=UUID=
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1795.760 MHz processor.
[ 15.826576] Console: colour VGA+ 80x25
[ 15.826849] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.827134] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.875577] Memory: 1538128k/1563136k available (2009k kernel code, 23680k reserved, 917k data, 364k init, 645632k highmem)
[ 15.875585] virtual kernel memory layout:
[ 15.875586] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 15.875587] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.875588] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.875589] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.875590] .init : 0xc03e1000 - 0xc043c000 ( 364 kB)
[ 15.875591] .data : 0xc02f67d8 - 0xc03dbee4 ( 917 kB)
[ 15.875592] .text : 0xc0100000 - 0xc02f67d8 (2009 kB)
[ 15.875595] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.875630] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 15.875655] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 15.875660] hpet0: 3 64-bit timers, 14318180 Hz
[ 15.956635] Calibrating delay using timer specific routine.. 3595.15 BogoMIPS (lpj=7190304)
[ 15.956655] Security Framework v1.0.0 initialized
[ 15.956661] SELinux: Disabled at boot.
[ 15.956673] Mount-cache hash table entries: 512
[ 15.956787] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 15.956795] monitor/mwait feature present.
[ 15.956797] using mwait in idle threads.
[ 15.956801] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.956803] CPU: L2 cache: 2048K
[ 15.956806] CPU: Physical Processor ID: 0
[ 15.956807] CPU: Processor Core ID: 0
[ 15.956809] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 15.956817] Compat vDSO mapped to ffffe000.
[ 15.956829] Checking 'hlt' instruction... OK.
[ 15.972722] SMP alternatives: switching to UP code
[ 15.973032] ACPI: Core revision 20070126
[ 15.977808] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 15.977824] SMP alternatives: switching to SMP code
[ 15.977841] Booting processor 1/1 eip 3000
[ 15.988184] Initializing CPU#1
[ 16.068569] Calibrating delay using timer specific routine.. 3591.01 BogoMIPS (lpj=7182032)
[ 16.068575] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 16.068579] monitor/mwait feature present.
[ 16.068582] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 16.068584] CPU: L2 cache: 2048K
[ 16.068586] CPU: Physical Processor ID: 0
[ 16.068587] CPU: Processor Core ID: 1
[ 16.068588] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 16.069055] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 16.069078] Total of 2 processors activated (7186.16 BogoMIPS).
[ 16.069278] ENABLING IO-APIC IRQs
[ 16.069479] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.216570] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 16.236574] Brought up 2 CPUs
[ 16.278649] migration_cost=17
[ 16.278765] Booting paravirtualized kernel on bare hardware
[ 16.278852] Time: 21:35:37 Date: 06/07/107
[ 16.278869] NET: Registered protocol family 16
[ 16.278939] EISA bus registered
[ 16.278943] ACPI: bus type pci registered
[ 16.278952] PCI: Using MMCONFIG
[ 16.279784] Setting up standard PCI resources
[ 16.314243] ACPI: SSDT 5F690C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
[ 16.314425] ACPI: Interpreter enabled
[ 16.314428] ACPI: (supports S0 S3 S4 S5)
[ 16.314442] ACPI: Using IOAPIC for interrupt routing
[ 16.364100] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.364114] PCI: Probing PCI hardware (bus 00)
[ 16.365781] PCI: Transparent bridge - 0000:00:1e.0
[ 16.365846] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-
[ 16.365848] Please report the result to linux-kernel to fix this permanently
[ 16.365904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.366341] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 16.366513] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 16.366633] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 16.366755] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 16.384219] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 16.384335] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 16.384467] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[ 16.384581] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[ 16.384695] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 16.384810] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 16.384924] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 16.385029] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 16.385157] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.385166] pnp: PnP ACPI init
[ 16.385175] ACPI: bus type pnp registered
[ 16.448174] pnp: PnP ACPI: found 14 devices
[ 16.448176] ACPI: ACPI bus type pnp unregistered
[ 16.448179] PnPBIOS: Disabled by ACPI PNP
[ 16.448219] PCI: Using ACPI for IRQ routing
[ 16.448221] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.448370] NET: Registered protocol family 8
[ 16.448372] NET: Registered protocol family 20
[ 16.448415] pnp: 00:05: ioport range 0xc80-0xcaf has been reserved
[ 16.448418] pnp: 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 16.448425] pnp: 00:08: iomem range 0xfed00000-
[ 16.448430] pnp: 00:0a: ioport range 0xcb0-0xcbb has been reserved
[ 16.448433] pnp: 00:0a: iomem range 0xfed40000-
[ 16.448437] pnp: 00:0b: ioport range 0x900-0x97f has been reserved
[ 16.448440] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 16.448442] pnp: 00:0b: ioport range 0x1000-0x1005 has been reserved
[ 16.448445] pnp: 00:0b: ioport range 0x1008-0x100f has been reserved
[ 16.448450] pnp: 00:0c: ioport range 0xf400-0xf4fe has been reserved
[ 16.448452] pnp: 00:0c: ioport range 0x1006-0x1007 has been reserved
[ 16.448455] pnp: 00:0c: ioport range 0x100a-0x1059 could not be reserved
[ 16.448457] pnp: 00:0c: ioport range 0x1060-0x107f has been reserved
[ 16.448460] pnp: 00:0c: ioport range 0x1080-0x10bf has been reserved
[ 16.448462] pnp: 00:0c: ioport range 0x10c0-0x10df has been reserved
[ 16.448464] pnp: 00:0c: ioport range 0x1010-0x102f has been reserved
[ 16.448469] pnp: 00:0d: iomem range 0x0-0x9efff could not be reserved
[ 16.448472] pnp: 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[ 16.448474] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 16.448477] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 16.452360] Time: tsc clocksource has been installed.
[ 16.478741] PCI: Bridge: 0000:00:1c.0
[ 16.478742] IO window: disabled.
[ 16.478747] MEM window: disabled.
[ 16.478751] PREFETCH window: disabled.
[ 16.478756] PCI: Bridge: 0000:00:1c.1
[ 16.478757] IO window: disabled.
[ 16.478762] MEM window: fe800000-fe8fffff
[ 16.478766] PREFETCH window: disabled.
[ 16.478771] PCI: Bridge: 0000:00:1c.5
[ 16.478772] IO window: disabled.
[ 16.478778] MEM window: fe700000-fe7fffff
[ 16.478782] PREFETCH window: disabled.
[ 16.478792] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[ 16.478794] IO window: 00002000-000020ff
[ 16.478799] IO window: 00002400-000024ff
[ 16.478803] PREFETCH window: 70000000-73ffffff
[ 16.478808] MEM window: 74000000-77ffffff
[ 16.478813] PCI: Bridge: 0000:00:1e.0
[ 16.478816] IO window: 2000-2fff
[ 16.478821] MEM window: fe600000-fe6fffff
[ 16.478825] PREFETCH window: 70000000-73ffffff
[ 16.478850] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 16.478856] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.478876] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 16.478881] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.478900] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 16.478905] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 16.478917] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.478932] PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
[ 16.478937] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 16.478950] NET: Registered protocol family 2
[ 16.500429] Switched to high resolution mode on CPU 1
[ 16.504332] Switched to high resolution mode on CPU 0
[ 16.520329] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.520378] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 16.520990] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.521212] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.521215] TCP reno registered
[ 16.536447] checking if image is initramfs... it is
[ 17.111059] Freeing initrd memory: 6738k freed
[ 17.111553] audit: initializing netlink socket (disabled)
[ 17.111567] audit(118384413
[ 17.111646] highmem bounce pool size: 64 pages
[ 17.113370] VFS: Disk quotas dquot_6.5.1
[ 17.113414] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.113493] io scheduler noop registered
[ 17.113495] io scheduler anticipatory registered
[ 17.113497] io scheduler deadline registered
[ 17.113509] io scheduler cfq registered (default)
[ 17.113520] Boot video device is 0000:00:02.0
[ 17.113714] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 17.113763] assign_
[ 17.113804] Allocate Port Service[
[ 17.113831] Allocate Port Service[
[ 17.113857] Allocate Port Service[
[ 17.113942] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 17.113990] assign_
[ 17.114027] Allocate Port Service[
[ 17.114053] Allocate Port Service[
[ 17.114082] Allocate Port Service[
[ 17.114165] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 17.114213] assign_
[ 17.114251] Allocate Port Service[
[ 17.114280] Allocate Port Service[
[ 17.114306] Allocate Port Service[
[ 17.114474] isapnp: Scanning for PnP cards...
[ 17.468288] isapnp: No Plug & Play device found
[ 17.486341] Real Time Clock Driver v1.12ac
[ 17.486476] hpet_resources: 0xfed00000 is busy
[ 17.486541] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.487096] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.487642] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.487751] input: Macintosh mouse button emulation as /class/input/input0
[ 17.487819] PNP: PS/2 Controller [PNP0303:
[ 17.491443] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.491448] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.491586] mice: PS/2 mouse device common for all mice
[ 17.491684] EISA: Probing bus 0 at eisa.0
[ 17.491687] EISA: Cannot allocate resource for mainboard
[ 17.491689] Cannot allocate resource for EISA slot 1
[ 17.491692] Cannot allocate resource for EISA slot 2
[ 17.491720] EISA: Detected 0 cards.
[ 17.491795] TCP cubic registered
[ 17.491807] NET: Registered protocol family 1
[ 17.491825] Using IPI No-Shortcut mode
[ 17.491983] Magic number: 15:787:600
[ 17.492014] hash matches device ptyd4
[ 17.492242] Freeing unused kernel memory: 364k freed
[ 17.494344] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.673857] Capability LSM initialized
[ 18.682195] ACPI: SSDT 5F681138, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 18.682393] ACPI: SSDT 5F680BFD, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 18.682664] Monitor-Mwait will be used to enter C-1 state
[ 18.682667] Monitor-Mwait will be used to enter C-2 state
[ 18.682669] Monitor-Mwait will be used to enter C-3 state
[ 18.682673] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 18.682678] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 18.682888] ACPI: SSDT 5F68137C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 18.683074] ACPI: SSDT 5F6810B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 18.683390] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 18.683395] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.688000] Marking TSC unstable due to: possible TSC halt in C2.
[ 2.692000] Time: hpet clocksource has been installed.
[ 2.692000] ACPI: Thermal Zone [THM] (52 C)
[ 3.204000] usbcore: registered new interface driver usbfs
[ 3.204000] usbcore: registered new interface driver hub
[ 3.204000] usbcore: registered new device driver usb
[ 3.208000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19
[ 3.208000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 3.208000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.208000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.208000] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.208000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 3.208000] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfed1c400
[ 3.212000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.212000] usb usb1: configuration #1 chosen from 1 choice
[ 3.212000] hub 1-0:1.0: USB hub found
[ 3.212000] hub 1-0:1.0: 4 ports detected
[ 3.220000] USB Universal Host Controller Interface driver v3.0
[ 3.228000] SCSI subsystem initialized
[ 3.232000] libata version 2.21 loaded.
[ 3.804000] Clocksource tsc unstable (delta = -534641256 ns)
[ 3.804000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.804000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.804000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.804000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 3.804000] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 3.804000] usb usb2: configuration #1 chosen from 1 choice
[ 3.808000] hub 2-0:1.0: USB hub found
[ 3.808000] hub 2-0:1.0: 2 ports detected
[ 3.912000] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 18
[ 3.960000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fe6ff000-
[ 3.964000] tg3.c:v3.77 (May 31, 2007)
[ 3.964000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3.964000] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 3.980000] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:da:c1:e8
[ 3.980000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 3.980000] eth0: dma_rwctrl[
[ 3.980000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.980000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.980000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.984000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 3.984000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.984000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.984000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 3.984000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.988000] usb usb3: configuration #1 chosen from 1 choice
[ 3.988000] hub 3-0:1.0: USB hub found
[ 3.988000] hub 3-0:1.0: 6 ports detected
[ 4.092000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 4.092000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 4.092000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.092000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.092000] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 4.092000] usb usb4: configuration #1 chosen from 1 choice
[ 4.092000] hub 4-0:1.0: USB hub found
[ 4.092000] hub 4-0:1.0: 2 ports detected
[ 4.872000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 4.872000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4.872000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.872000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.872000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 4.872000] usb usb5: configuration #1 chosen from 1 choice
[ 4.872000] hub 5-0:1.0: USB hub found
[ 4.872000] hub 5-0:1.0: 2 ports detected
[ 4.976000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 4.976000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 4.976000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.976000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.976000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 4.976000] usb usb6: configuration #1 chosen from 1 choice
[ 4.976000] hub 6-0:1.0: USB hub found
[ 4.976000] hub 6-0:1.0: 2 ports detected
[ 5.084000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 19
[ 5.084000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 5.084000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.084000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 5.084000] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00006f40
[ 5.084000] usb usb7: configuration #1 chosen from 1 choice
[ 5.084000] hub 7-0:1.0: USB hub found
[ 5.084000] hub 7-0:1.0: 2 ports detected
[ 5.272000] ata_piix 0000:00:1f.2: version 2.11
[ 5.272000] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 5.340000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[314fc0003b
[ 5.476000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.476000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.476000] scsi0 : ata_piix
[ 5.476000] scsi1 : ata_piix
[ 5.476000] ata1: SATA max UDMA/133 cmd 0x00016eb0 ctl 0x00016eba bmdma 0x00016ee0 irq 0
[ 5.476000] ata2: SATA max UDMA/133 cmd 0x00016ec0 ctl 0x00016eca bmdma 0x00016ee8 irq 0
[ 5.640000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 5.640000] ata1.00: ATA-7: Hitachi HTS721080G9SA00, MC4OC10H, max UDMA/100
[ 5.640000] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 5.656000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 5.656000] ata1.00: configured for UDMA/100
[ 5.812000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72108 MC4O PQ: 0 ANSI: 5
[ 5.816000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.816000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.816000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.816000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.816000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.816000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.816000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.816000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.816000] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 5.860000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.864000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.960000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 6.100000] Attempting manual resume
[ 6.100000] swsusp: Resume From Partition 8:5
[ 6.100000] PM: Checking swsusp image.
[ 6.100000] PM: Resume from disk failed.
[ 6.140000] kjournald starting. Commit interval 5 seconds
[ 6.140000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.168000] usb 5-1: configuration #1 chosen from 1 choice
[ 6.412000] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 6.576000] usb 6-1: configuration #1 chosen from 1 choice
[ 6.820000] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 6.972000] usb 7-1: configuration #1 chosen from 1 choice
[ 6.972000] hub 7-1:1.0: USB hub found
[ 6.976000] hub 7-1:1.0: 4 ports detected
[ 7.296000] usb 7-1.2: new full speed USB device using uhci_hcd and address 3
[ 7.412000] usb 7-1.2: configuration #1 chosen from 1 choice
[ 15.040000] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
[ 16.044000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.068000] agpgart: Detected an Intel 965GM Chipset.
[ 16.068000] agpgart: Detected 7676K stolen memory.
[ 16.080000] agpgart: AGP aperture is 256M @ 0xe0000000
[ 16.200000] input: PC Speaker as /class/input/input2
[ 16.228000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.252000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.304000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9]
[ 16.304000] Yenta O2: res at 0x94/0xD4: 00/ea
[ 16.304000] Yenta O2: enabling read prefetch/write burst
[ 16.432000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
[ 16.432000] Socket status: 30000006
[ 16.432000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 16.432000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 16.432000] cs: IO port probe 0x2000-0x2fff: clean.
[ 16.432000] pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff
[ 16.432000] pcmcia: parent PCI bridge Memory window: 0x70000000 - 0x73ffffff
[ 16.508000] NET: Registered protocol family 17
[ 16.528000] ieee80211_crypt: registered algorithm 'NULL'
[ 16.528000] ieee80211: 802.11 data/management
[ 16.528000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 16.560000] Bluetooth: Core ver 2.11
[ 16.560000] NET: Registered protocol family 31
[ 16.560000] Bluetooth: HCI device and connection manager initialized
[ 16.560000] Bluetooth: HCI socket layer initialized
[ 16.616000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.1mp
[ 16.616000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 16.616000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 16.616000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 16.616000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 16.632000] Bluetooth: HCI USB driver ver 2.9
[ 16.688000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 16.688000] tg3: eth0: Flow control is on for TX and on for RX.
[ 16.732000] input: PS/2 Mouse as /class/input/input3
[ 16.740000] usbcore: registered new interface driver hci_usb
[ 16.740000] usbcore: registered new interface driver hiddev
[ 16.752000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[ 16.848000] input: USB Mouse as /class/input/input5
[ 16.848000] input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.1-1
[ 16.848000] usbcore: registered new interface driver usbhid
[ 16.848000] /build/
[ 17.100000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 17.100000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 17.144000] cs: IO port probe 0x100-0x3af: clean.
[ 17.144000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 17.144000] cs: IO port probe 0x820-0x8ff: clean.
[ 17.144000] cs: IO port probe 0xc00-0xcf7: clean.
[ 17.148000] cs: IO port probe 0xa00-0xaff: clean.
[ 18.324000] ALSA /usr/src/
[ 18.528000] ipw3945: Radio Frequency Kill Switch is On:
[ 18.528000] Kill switch must be turned off for wireless networking to work.
[ 19.328000] ALSA /usr/src/
[ 26.448000] ALSA /usr/src/
[ 26.448000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 26.592000] lp: driver loaded but no devices found
[ 26.644000] fuse init (API version 7.8)
[ 26.696000] Adding 2698880k swap on /dev/disk/
[ 26.820000] EXT3 FS on sda3, internal journal
[ 27.052000] NET: Registered protocol family 10
[ 27.052000] lo: Disabled Privacy Extensions
[ 28.088000] ACPI: Battery Slot [BAT0] (battery present)
[ 28.088000] ACPI: Battery Slot [BAT1] (battery absent)
[ 28.096000] ACPI: AC Adapter [AC] (on-line)
[ 28.104000] ACPI: ACPI Dock Station Driver
[ 28.136000] input: Lid Switch as /class/input/input6
[ 28.136000] ACPI: Lid Switch [LID]
[ 28.136000] input: Power Button (CM) as /class/input/input7
[ 28.136000] ACPI: Power Button (CM) [PBTN]
[ 28.136000] input: Sleep Button (CM) as /class/input/input8
[ 28.136000] ACPI: Sleep Button (CM) [SBTN]
[ 28.172000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 28.192000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 28.192000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 28.192000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 28.200000] ACPI: \_SB_.PCI0.
[ 28.200000] ACPI: \_SB_.PCI0.
[ 28.200000] ACPI: Bay [\_SB_.
[ 28.200000] ACPI: \_SB_.PCI0.
[ 28.200000] ACPI: \_SB_.PCI0.
[ 28.200000] ACPI: Bay [\_SB_.
[ 33.200000] apm: BIOS not found.
[ 34.224000] [drm] Initialized drm 1.1.0 20060810
[ 34.248000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.248000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 34.788000] Bluetooth: L2CAP ver 2.8
[ 34.788000] Bluetooth: L2CAP socket layer initialized
[ 35.072000] Bluetooth: RFCOMM socket layer initialized
[ 35.072000] Bluetooth: RFCOMM TTY layer initialized
[ 35.072000] Bluetooth: RFCOMM ver 1.8
[ 120.116000] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
[ 120.196000] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
[ 120.256000] ADDRCONF(
[ 121.812000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 121.812000] tg3: eth0: Flow control is on for TX and on for RX.
[ 121.816000] ADDRCONF(
[ 137.020000] eth0: no IPv6 routers present
[ 1216.448000] usb 5-1: USB disconnect, address 2
cat /proc/interrupts
CPU0 CPU1
0: 527371 526935 IO-APIC-edge timer
1: 3077 3018 IO-APIC-edge i8042
8: 1 4 IO-APIC-edge rtc
9: 8 8 IO-APIC-fasteoi acpi
12: 75 76 IO-APIC-edge i8042
16: 202577 204054 IO-APIC-fasteoi i915@pci:
17: 12887 12886 IO-APIC-fasteoi libata, ipw3945
18: 5 4 IO-APIC-fasteoi ohci1394, yenta
19: 60 62 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7
20: 59172 59174 IO-APIC-fasteoi uhci_hcd:usb2, ehci_hcd:usb3, uhci_hcd:usb5
21: 58821 58525 IO-APIC-fasteoi uhci_hcd:usb4, uhci_hcd:usb6
220: 17783 17634 PCI-MSI-edge eth0
NMI: 0 0
LOC: 461967 501135
ERR: 0
MIS: 0
Changed in linux-source-2.6.22: | |
assignee: | nobody → ubuntu-audio |
importance: | Undecided → Medium |
status: | New → Triaged |
Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description didn't include enough information.
Please include the information requested from [WWW] https:/ /help.ubuntu. com/community/ DebuggingSoundP roblems as separate attachments.