[ 0.000000] Linux version 2.6.22-12-generic (buildd@crested) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 20:03:18 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz quiet irqpoll -- [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable) [ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524160) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FAF20, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7FF80000, 0038 (r1 A_M_I_ OEMRSDT 7000724 MSFT 97) [ 0.000000] ACPI: FACP 7FF80200, 0081 (r1 A_M_I_ OEMFACP 7000724 MSFT 97) [ 0.000000] ACPI: DSDT 7FF80590, 9560 (r1 A0543 A0543000 0 INTL 20060113) [ 0.000000] ACPI: FACS 7FF8E000, 0040 [ 0.000000] ACPI: APIC 7FF80390, 0080 (r1 A_M_I_ OEMAPIC 7000724 MSFT 97) [ 0.000000] ACPI: OEMB 7FF8E040, 0066 (r1 A_M_I_ AMI_OEM 7000724 MSFT 97) [ 0.000000] ACPI: HPET 7FF89AF0, 0038 (r1 A_M_I_ OEMHPET 7000724 MSFT 97) [ 0.000000] ACPI: MCFG 7FF89B30, 003C (r1 A_M_I_ OEMMCFG 7000724 MSFT 97) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ff80000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524160) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff80000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524160 [ 0.000000] On node 0 totalpages: 524063 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1130 pages reserved [ 0.000000] DMA zone: 2813 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7110 pages used for memmap [ 0.000000] DMA32 zone: 512954 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515767 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz quiet irqpoll -- [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 49.411807] time.c: Detected 2404.111 MHz processor. [ 49.412511] Console: colour VGA+ 80x25 [ 49.412527] Checking aperture... [ 49.412534] Calgary: detecting Calgary via BIOS EBDA area [ 49.412536] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 49.434068] Memory: 2055080k/2096640k available (2281k kernel code, 41172k reserved, 1182k data, 300k init) [ 49.434107] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 49.510023] Calibrating delay using timer specific routine.. 4827.56 BogoMIPS (lpj=9655128) [ 49.510050] Security Framework v1.0.0 initialized [ 49.510056] SELinux: Disabled at boot. [ 49.510217] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 49.511405] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 49.511956] Mount-cache hash table entries: 256 [ 49.512073] CPU: L1 I cache: 32K, L1 D cache: 32K [ 49.512076] CPU: L2 cache: 4096K [ 49.512078] CPU 0/0 -> Node 0 [ 49.512079] using mwait in idle threads. [ 49.512081] CPU: Physical Processor ID: 0 [ 49.512082] CPU: Processor Core ID: 0 [ 49.512087] CPU0: Thermal monitoring enabled (TM2) [ 49.512097] SMP alternatives: switching to UP code [ 49.512318] Early unpacking initramfs... done [ 49.802668] ACPI: Core revision 20070126 [ 49.802713] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 49.858457] Using local APIC timer interrupts. [ 49.899964] result 16695219 [ 49.899966] Detected 16.695 MHz APIC timer. [ 49.901193] SMP alternatives: switching to SMP code [ 49.901252] Booting processor 1/2 APIC 0x1 [ 49.911615] Initializing CPU#1 [ 50.008895] Calibrating delay using timer specific routine.. 4808.32 BogoMIPS (lpj=9616643) [ 50.008901] CPU: L1 I cache: 32K, L1 D cache: 32K [ 50.008902] CPU: L2 cache: 4096K [ 50.008904] CPU 1/1 -> Node 0 [ 50.008906] CPU: Physical Processor ID: 0 [ 50.008907] CPU: Processor Core ID: 1 [ 50.008911] CPU1: Thermal monitoring enabled (TM2) [ 50.009320] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 50.009342] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 50.032877] Brought up 2 CPUs [ 50.148962] migration_cost=27 [ 50.149095] NET: Registered protocol family 16 [ 50.149157] ACPI: bus type pci registered [ 50.149162] PCI: Using configuration type 1 [ 50.151438] ACPI: EC: Look up EC in DSDT [ 50.158429] ACPI: Interpreter enabled [ 50.158431] ACPI: (supports S0 S1 S3 S4 S5) [ 50.158446] ACPI: Using IOAPIC for interrupt routing [ 50.164072] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 50.164083] PCI: Probing PCI hardware (bus 00) [ 50.164514] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 50.164517] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 50.165206] PCI: Transparent bridge - 0000:00:1e.0 [ 50.165258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 50.165380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 50.165452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 50.165551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 50.165623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 50.165686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 50.167625] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 50.167724] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 50.167823] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 50.167924] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 50.168021] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 50.168119] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 50.168217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 50.168316] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 50.168392] Linux Plug and Play Support v0.97 (c) Adam Belay [ 50.168399] pnp: PnP ACPI init [ 50.168406] ACPI: bus type pnp registered [ 50.170614] pnp: PnP ACPI: found 14 devices [ 50.170616] ACPI: ACPI bus type pnp unregistered [ 50.170655] PCI: Using ACPI for IRQ routing [ 50.170656] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 50.170727] NET: Registered protocol family 8 [ 50.170729] NET: Registered protocol family 20 [ 50.170739] PCI-GART: No AMD northbridge found. [ 50.170743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 50.170746] hpet0: 3 64-bit timers, 14318180 Hz [ 50.171777] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 50.171782] pnp: 00:06: ioport range 0x290-0x297 has been reserved [ 50.171785] pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 50.171788] pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 50.171790] pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved [ 50.171792] pnp: 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved [ 50.171796] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 50.171798] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [ 50.171802] pnp: 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved [ 50.171806] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 50.171808] pnp: 00:0d: iomem range 0xc0000-0xdffff has been reserved [ 50.171810] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 50.171812] pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved [ 50.172038] PCI: Bridge: 0000:00:01.0 [ 50.172040] IO window: c000-cfff [ 50.172043] MEM window: ff900000-ff9fffff [ 50.172045] PREFETCH window: cff00000-efefffff [ 50.172047] PCI: Bridge: 0000:00:1c.0 [ 50.172049] IO window: disabled. [ 50.172052] MEM window: disabled. [ 50.172055] PREFETCH window: cfe00000-cfefffff [ 50.172059] PCI: Bridge: 0000:00:1c.3 [ 50.172061] IO window: b000-bfff [ 50.172064] MEM window: ff800000-ff8fffff [ 50.172067] PREFETCH window: disabled. [ 50.172071] PCI: Bridge: 0000:00:1c.4 [ 50.172073] IO window: a000-afff [ 50.172076] MEM window: ff700000-ff7fffff [ 50.172079] PREFETCH window: disabled. [ 50.172083] PCI: Bridge: 0000:00:1e.0 [ 50.172084] IO window: disabled. [ 50.172088] MEM window: ff600000-ff6fffff [ 50.172090] PREFETCH window: disabled. [ 50.172101] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.172105] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 50.172118] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.172122] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 50.172135] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 50.172139] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 50.172151] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.172155] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 50.172163] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 50.172172] NET: Registered protocol family 2 [ 50.172536] Time: tsc clocksource has been installed. [ 50.208540] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 50.209076] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 50.211823] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 50.212600] TCP: Hash tables configured (established 262144 bind 65536) [ 50.212603] TCP reno registered [ 50.224593] checking if image is initramfs... it is [ 50.802284] Freeing initrd memory: 7717k freed [ 50.805355] audit: initializing netlink socket (disabled) [ 50.805369] audit(1192125281.316:1): initialized [ 50.806982] VFS: Disk quotas dquot_6.5.1 [ 50.807020] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 50.807087] io scheduler noop registered [ 50.807089] io scheduler anticipatory registered [ 50.807090] io scheduler deadline registered [ 50.807243] io scheduler cfq registered (default) [ 50.809131] Boot video device is 0000:05:00.0 [ 50.809230] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 50.809254] assign_interrupt_mode Found MSI capability [ 50.809275] Allocate Port Service[0000:00:01.0:pcie00] [ 50.809335] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 50.809366] assign_interrupt_mode Found MSI capability [ 50.809392] Allocate Port Service[0000:00:1c.0:pcie00] [ 50.809419] Allocate Port Service[0000:00:1c.0:pcie02] [ 50.809479] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 50.809510] assign_interrupt_mode Found MSI capability [ 50.809535] Allocate Port Service[0000:00:1c.3:pcie00] [ 50.809594] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 50.809625] assign_interrupt_mode Found MSI capability [ 50.809650] Allocate Port Service[0000:00:1c.4:pcie00] [ 50.825776] Real Time Clock Driver v1.12ac [ 50.825923] hpet_resources: 0xfed00000 is busy [ 50.825945] Linux agpgart interface v0.102 (c) Dave Jones [ 50.825947] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 50.826037] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 50.826465] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 50.826946] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 50.827042] input: Macintosh mouse button emulation as /class/input/input0 [ 50.827102] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 50.827104] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 50.829742] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 50.829745] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 50.829843] mice: PS/2 mouse device common for all mice [ 50.829939] TCP cubic registered [ 50.829979] NET: Registered protocol family 1 [ 50.830116] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 50.830122] Freeing unused kernel memory: 300k freed [ 50.851715] input: AT Translated Set 2 keyboard as /class/input/input1 [ 50.935099] AppArmor: AppArmor initialized<5>audit(1192125281.448:2): type=1505 info="AppArmor initialized" pid=1215 [ 50.939438] fuse init (API version 7.8) [ 50.942558] Failure registering capabilities with primary security module. [ 50.972154] ACPI: Processor [CPU1] (supports 8 throttling states) [ 50.972309] ACPI: Processor [CPU2] (supports 8 throttling states) [ 50.972317] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 50.972325] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 51.262672] SCSI subsystem initialized [ 51.268653] libata version 2.21 loaded. [ 51.270733] ata_piix 0000:00:1f.1: version 2.11 [ 51.270749] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 51.270774] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 51.270855] scsi0 : ata_piix [ 51.270887] scsi1 : ata_piix [ 51.270963] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14 [ 51.270966] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15 [ 51.326857] usbcore: registered new interface driver usbfs [ 51.327065] usbcore: registered new interface driver hub [ 51.327267] usbcore: registered new device driver usb [ 51.328154] USB Universal Host Controller Interface driver v3.0 [ 51.608177] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 51.765018] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23 [ 51.765080] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 51.765108] scsi2 : ata_piix [ 51.765234] scsi3 : ata_piix [ 51.765253] ata3: SATA max UDMA/133 cmd 0x000000000001e400 ctl 0x000000000001e082 bmdma 0x000000000001d880 irq 23 [ 51.765255] ata4: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001dc02 bmdma 0x000000000001d888 irq 23 [ 51.966490] ata3.00: ATA-7: WDC WD1600YS-01SHB0, 20.06C03, max UDMA/133 [ 51.966493] ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 51.981330] ata3.01: ATA-7: WDC WD1600YS-01SHB0, 20.06C03, max UDMA/133 [ 51.981333] ata3.01: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 51.993087] ata3.00: configured for UDMA/133 [ 52.004837] ata3.01: configured for UDMA/133 [ 52.355898] ata4.01: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33 [ 52.355900] ata4.01: applying bridge limits [ 52.535499] ata4.01: configured for UDMA/33 [ 52.536840] scsi 2:0:0:0: Direct-Access ATA WDC WD1600YS-01S 20.0 PQ: 0 ANSI: 5 [ 52.538488] scsi 2:0:1:0: Direct-Access ATA WDC WD1600YS-01S 20.0 PQ: 0 ANSI: 5 [ 52.540198] scsi 3:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5 [ 52.540324] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 52.540601] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 52.540607] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 52.540610] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 52.540814] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 52.540838] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480 [ 52.541126] usb usb1: configuration #1 chosen from 1 choice [ 52.541249] hub 1-0:1.0: USB hub found [ 52.541253] hub 1-0:1.0: 2 ports detected [ 52.590541] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff6ff800-ff6fffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 52.592785] sd 2:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 52.592795] sd 2:0:0:0: [sda] Write Protect is off [ 52.592797] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 52.592807] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 52.592845] sd 2:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 52.592851] sd 2:0:0:0: [sda] Write Protect is off [ 52.592853] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 52.592863] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 52.592866] sda: sda1 sda2 sda3 sda4 < sda5 > [ 52.618365] sd 2:0:0:0: [sda] Attached SCSI disk [ 52.618501] sd 2:0:1:0: [sdb] 321672960 512-byte hardware sectors (164697 MB) [ 52.618508] sd 2:0:1:0: [sdb] Write Protect is off [ 52.618510] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 52.618520] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 52.618543] sd 2:0:1:0: [sdb] 321672960 512-byte hardware sectors (164697 MB) [ 52.618549] sd 2:0:1:0: [sdb] Write Protect is off [ 52.618551] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 52.618561] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 52.618563] sdb: sdb1 sdb2 sdb3 [ 52.627099] sd 2:0:1:0: [sdb] Attached SCSI disk [ 52.629200] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 52.629215] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 52.629226] sr 3:0:1:0: Attached scsi generic sg2 type 5 [ 52.636926] sr0: scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 52.636929] Uniform CD-ROM driver Revision: 3.20 [ 52.636962] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 52.647158] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 52.647168] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 52.647171] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 52.647186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 52.647209] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800 [ 52.647275] usb usb2: configuration #1 chosen from 1 choice [ 52.647292] hub 2-0:1.0: USB hub found [ 52.647296] hub 2-0:1.0: 2 ports detected [ 52.754917] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 52.754928] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 52.754930] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 52.754949] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 52.754973] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880 [ 52.755042] usb usb3: configuration #1 chosen from 1 choice [ 52.755060] hub 3-0:1.0: USB hub found [ 52.755064] hub 3-0:1.0: 2 ports detected [ 52.862640] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 52.862647] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 52.862650] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 52.862664] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 52.862686] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00 [ 52.862754] usb usb4: configuration #1 chosen from 1 choice [ 52.862774] hub 4-0:1.0: USB hub found [ 52.862778] hub 4-0:1.0: 2 ports detected [ 52.890510] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 52.970503] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 52.971327] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 52.971332] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 52.971370] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 52.971397] ehci_hcd 0000:00:1d.7: debug port 1 [ 52.971402] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 52.971407] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffafbc00 [ 52.975285] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 52.975352] usb usb5: configuration #1 chosen from 1 choice [ 52.975370] hub 5-0:1.0: USB hub found [ 52.975375] hub 5-0:1.0: 8 ports detected [ 53.111140] kjournald starting. Commit interval 5 seconds [ 53.111147] EXT3-fs: mounted filesystem with ordered data mode. [ 53.140579] kjournald starting. Commit interval 5 seconds [ 53.140585] EXT3-fs: mounted filesystem with ordered data mode. [ 53.254633] kjournald starting. Commit interval 5 seconds [ 53.254640] EXT3-fs: mounted filesystem with ordered data mode. [ 53.425319] usb 1-2: device not accepting address 2, error -71 [ 53.678269] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 53.735575] ISO 9660 Extensions: RRIP_1991A [ 53.775680] Registering unionfs 2.1.4 (for 2.6.22.6) [ 53.780460] loop: module loaded [ 53.864534] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000101e7b6] [ 53.888746] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 54.407144] usb 5-7: new high speed USB device using ehci_hcd and address 4 [ 54.552155] usb 5-7: configuration #1 chosen from 1 choice [ 54.552356] hub 5-7:1.0: USB hub found [ 54.552588] hub 5-7:1.0: 4 ports detected [ 54.898054] usb 1-2: new low speed USB device using uhci_hcd and address 4 [ 55.081323] usb 1-2: configuration #1 chosen from 1 choice [ 55.325107] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 55.507989] usb 2-2: configuration #1 chosen from 1 choice [ 55.732489] usb 5-7.1: new high speed USB device using ehci_hcd and address 5 [ 55.837699] usb 5-7.1: configuration #1 chosen from 1 choice [ 56.059768] usb 5-7.3: new high speed USB device using ehci_hcd and address 6 [ 56.169712] usb 5-7.3: configuration #1 chosen from 1 choice [ 56.171534] usbcore: registered new interface driver hiddev [ 56.183984] input: Logitech Optical USB Mouse as /class/input/input2 [ 56.183998] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2 [ 56.184011] usbcore: registered new interface driver usbhid [ 56.184013] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 56.184102] usbcore: registered new interface driver libusual [ 56.187676] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 56.187680] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 56.188782] Initializing USB Mass Storage driver... [ 56.188830] scsi4 : SCSI emulation for USB Mass Storage devices [ 56.188864] usb-storage: device found at 5 [ 56.188865] usb-storage: waiting for device to settle before scanning [ 56.188876] usbcore: registered new interface driver usb-storage [ 56.188878] USB Mass Storage support registered. [ 61.180247] usb-storage: device scan complete [ 61.181118] scsi 4:0:0:0: Direct-Access USB 2.0 Flash Disk 1100 PQ: 0 ANSI: 0 CCS [ 61.182464] sd 4:0:0:0: [sdc] 1981440 512-byte hardware sectors (1014 MB) [ 61.183225] sd 4:0:0:0: [sdc] Write Protect is off [ 61.183227] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 61.183229] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 61.185470] sd 4:0:0:0: [sdc] 1981440 512-byte hardware sectors (1014 MB) [ 61.186218] sd 4:0:0:0: [sdc] Write Protect is off [ 61.186220] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 61.186222] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 61.186251] sdc: sdc1 sdc2 [ 61.187142] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 61.187171] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 63.383759] unionfs: error creating directory tree for rename, bindex = 1, err = -30 [ 66.688542] unionfs: new lower inode mtime (bindex=0, name=log) [ 66.688625] unionfs: new lower inode mtime (bindex=0, name=log) [ 82.297450] unionfs: error creating directory tree for rename, bindex = 1, err = -30 [ 82.351372] unionfs: error creating directory tree for rename, bindex = 1, err = -30 [ 82.470042] __open_dir: branch 0 lower_mnt_idx NULL! Set to ffff81007d99cd00 [ 82.470046] __open_dir: opened ffff81007b15d820, rcS.d [ 82.470047] __open_dir: branches bstart 0, bend 1 [ 82.470049] __open_dir: 0: lower_dentry ffff810078f8e9c0, rcS.d, mntpoint ffff81007d99cd00 [ 82.470052] __open_dir: 1: lower_dentry ffff810078f8e9c0, rcS.d, mntpoint ffff81007d99c600 [ 88.146624] unionfs: error creating directory tree for rename, bindex = 1, err = -30 [ 88.153239] __open_dir: branch 0 lower_mnt_idx NULL! Set to ffff81007d99cd00 [ 88.153244] __open_dir: opened ffff81007fd8fea0, rc0.d [ 88.153245] __open_dir: branches bstart 0, bend 1 [ 88.153248] __open_dir: 0: lower_dentry ffff81007f9df5b0, rc0.d, mntpoint ffff81007d99cd00 [ 88.153250] __open_dir: 1: lower_dentry ffff81007f9df5b0, rc0.d, mntpoint ffff81007d99c600 [ 88.153733] __open_dir: branch 0 lower_mnt_idx NULL! Set to ffff81007d99cd00 [ 88.153736] __open_dir: opened ffff81007fed04e0, rc6.d [ 88.153738] __open_dir: branches bstart 0, bend 1 [ 88.153740] __open_dir: 0: lower_dentry ffff81007fa548f0, rc6.d, mntpoint ffff81007d99cd00 [ 88.153742] __open_dir: 1: lower_dentry ffff81007fa548f0, rc6.d, mntpoint ffff81007d99c600 [ 88.459386] unionfs: new lower inode mtime (bindex=0, name=log) [ 95.037394] unionfs: new lower inode mtime (bindex=0, name=input) [ 96.411126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 96.478989] iTCO_vendor_support: vendor-support=0 [ 96.479745] unionfs: new lower inode mtime (bindex=0, name=hotplug) [ 96.585619] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 96.585703] unionfs: new lower inode mtime (bindex=0, name=hotplug) [ 96.832680] unionfs: new lower inode mtime (bindex=0, name=ata) [ 97.006136] input: PC Speaker as /class/input/input3 [ 97.010814] unionfs: new lower inode mtime (bindex=0, name=host) [ 97.074898] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 97.074961] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 97.074994] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 97.118504] intel_rng: FWH not detected [ 97.177537] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 97.177548] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 97.178244] sky2 0000:03:00.0: v1.14 addr 0xff8fc000 irq 19 Yukon-EC (0xb6) rev 2 [ 97.178504] sky2 eth0: addr 00:18:f3:eb:02:ae [ 97.178525] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 97.178535] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 97.179225] sky2 0000:02:00.0: v1.14 addr 0xff7fc000 irq 16 Yukon-EC (0xb6) rev 2 [ 97.179460] sky2 eth1: addr 00:18:f3:ea:f3:07 [ 97.179581] unionfs: new lower inode mtime (bindex=0, name=net) [ 97.523645] unionfs: new lower inode mtime (bindex=0, name=scsi) [ 97.691758] unionfs: new lower inode mtime (bindex=0, name=scsi) [ 97.789883] Bluetooth: Core ver 2.11 [ 97.789946] NET: Registered protocol family 31 [ 97.789947] Bluetooth: HCI device and connection manager initialized [ 97.789950] Bluetooth: HCI socket layer initialized [ 97.790075] unionfs: new lower inode mtime (bindex=0, name=bluetooth) [ 97.834945] Bluetooth: HCI USB driver ver 2.9 [ 97.835887] unionfs: new lower inode mtime (bindex=0, name=scsi) [ 97.963546] ieee80211_init: failed to initialize WME (err=-17) [ 98.007063] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister [ 98.007087] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put [ 98.007108] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get [ 98.007141] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register [ 98.009733] wmaster0: Selected rate control algorithm 'simple' [ 98.248288] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 98.249148] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 98.250179] phy0: hwaddr 00:15:af:0d:44:56, rtl8187 V1 + rtl8225z2 [ 98.250192] usbcore: registered new interface driver rtl8187 [ 98.250335] usbcore: registered new interface driver hci_usb [ 98.250457] unionfs: new lower inode mtime (bindex=0, name=bluetooth) [ 99.350646] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k [ 100.785181] No dock devices found. [ 100.826543] input: Power Button (FF) as /class/input/input4 [ 100.826561] ACPI: Power Button (FF) [PWRF] [ 100.826632] input: Power Button (CM) as /class/input/input5 [ 100.826642] ACPI: Power Button (CM) [PWRB] [ 107.010111] sky2 eth0: enabling interface [ 107.011928] sky2 eth0: ram buffer 48K [ 107.225714] sky2 eth1: enabling interface [ 107.227545] sky2 eth1: ram buffer 48K [ 108.514265] lp: driver loaded but no devices found [ 108.888546] ppdev: user-space parallel port driver [ 109.992365] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 121.033394] Failure registering capabilities with primary security module. [ 121.762325] Bluetooth: L2CAP ver 2.8 [ 121.762329] Bluetooth: L2CAP socket layer initialized [ 122.034642] Bluetooth: RFCOMM socket layer initialized [ 122.034654] Bluetooth: RFCOMM TTY layer initialized [ 122.034656] Bluetooth: RFCOMM ver 1.8 [ 127.966574] NET: Registered protocol family 17 [ 137.820359] __open_dir: branch 0 lower_mnt_idx NULL! Set to ffff81007d99cd00 [ 137.820367] __open_dir: opened ffff81007ce95ea0, services [ 137.820369] __open_dir: branches bstart 0, bend 1 [ 137.820372] __open_dir: 0: lower_dentry ffff810076b7c5b0, services, mntpoint ffff81007d99cd00 [ 137.820374] __open_dir: 1: lower_dentry ffff810076b7c5b0, services, mntpoint ffff81007d99c600 [ 137.820634] __open_dir: branch 0 lower_mnt_idx NULL! Set to ffff81007d99cd00 [ 137.820638] __open_dir: opened ffff81007f8f19c0, kded [ 137.820640] __open_dir: branches bstart 0, bend 1 [ 137.820642] __open_dir: 0: lower_dentry ffff81007db0d0d0, kded, mntpoint ffff81007d99cd00 [ 137.820645] __open_dir: 1: lower_dentry ffff81007db0d0d0, kded, mntpoint ffff81007d99c600 [ 143.617887] __open_dir: branch 0 lower_mnt_idx NULL! Set to ffff81007d99cd00 [ 143.617893] __open_dir: opened ffff81007dbf4820, autostart [ 143.617894] __open_dir: branches bstart 0, bend 1 [ 143.617897] __open_dir: 0: lower_dentry ffff81007f8f3a90, autostart, mntpoint ffff81007d99cd00 [ 143.617899] __open_dir: 1: lower_dentry ffff81007f8f3a90, autostart, mntpoint ffff81007d99c600 [ 143.618707] __open_dir: branch 0 lower_mnt_idx NULL! Set to ffff81007d99cd00 [ 143.618711] __open_dir: opened ffff810077a3e270, autostart [ 143.618712] __open_dir: branches bstart 0, bend 1 [ 143.618714] __open_dir: 0: lower_dentry ffff810077a3e000, autostart, mntpoint ffff81007d99cd00 [ 143.618717] __open_dir: 1: lower_dentry ffff810077a3e000, autostart, mntpoint ffff81007d99c600 [ 178.016707] NET: Registered protocol family 10 [ 178.016940] lo: Disabled Privacy Extensions [ 178.017140] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 178.017277] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 188.892880] eth0: no IPv6 routers present