[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003e4c1000 (usable) [ 0.000000] BIOS-e820: 000000003e4c1000 - 000000003e4ce000 (reserved) [ 0.000000] BIOS-e820: 000000003e4ce000 - 000000003e556000 (usable) [ 0.000000] BIOS-e820: 000000003e556000 - 000000003e5eb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003e5eb000 - 000000003e5ef000 (usable) [ 0.000000] BIOS-e820: 000000003e5ef000 - 000000003e5ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003e5ff000 - 000000003e600000 (usable) [ 0.000000] BIOS-e820: 000000003e600000 - 000000003ef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 102MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000fe200 [ 0.000000] Entering add_active_range(0, 0, 255488) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 255488 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 255488 [ 0.000000] On node 0 totalpages: 255488 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 204 pages used for memmap [ 0.000000] HighMem zone: 25908 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) [ 0.000000] ACPI: RSDT 3E5FD038, 0050 (r1 INTEL D965G B25 1000013) [ 0.000000] ACPI: FACP 3E5FC000, 0074 (r1 INTEL D965G B25 MSFT 1000013) [ 0.000000] ACPI: DSDT 3E5F8000, 39AD (r1 INTEL D965G B25 MSFT 1000013) [ 0.000000] ACPI: FACS 3E5A3000, 0040 [ 0.000000] ACPI: APIC 3E5F7000, 0078 (r1 INTEL D965G B25 MSFT 1000013) [ 0.000000] ACPI: WDDT 3E5F6000, 0040 (r1 INTEL D965G B25 MSFT 1000013) [ 0.000000] ACPI: MCFG 3E5F5000, 003C (r1 INTEL D965G B25 MSFT 1000013) [ 0.000000] ACPI: ASF! 3E5F4000, 00A6 (r32 INTEL D965G B25 MSFT 1000013) [ 0.000000] ACPI: SSDT 3E5F3000, 01BC (r1 INTEL CpuPm B25 MSFT 1000013) [ 0.000000] ACPI: SSDT 3E5F2000, 0175 (r1 INTEL Cpu0Ist B25 MSFT 1000013) [ 0.000000] ACPI: SSDT 3E5F1000, 0175 (r1 INTEL Cpu1Ist B25 MSFT 1000013) [ 0.000000] ACPI: SSDT 3E5F0000, 0175 (r1 INTEL Cpu2Ist B25 MSFT 1000013) [ 0.000000] ACPI: SSDT 3E5EF000, 0175 (r1 INTEL Cpu3Ist B25 MSFT 1000013) [ 0.000000] ACPI: TCPA 3E556000, 0028 (r1 INTEL TIANO 2 MSFT 1000013) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ef00000:c0f00000) [ 0.000000] Built 1 zonelists. Total pages: 253492 [ 0.000000] Kernel command line: root=UUID=ad543d9e-33fb-4fd6-89e8-e112330bf0da ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2400.181 MHz processor. [ 84.846918] Console: colour VGA+ 80x25 [ 84.847073] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 84.847264] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 84.864474] Memory: 1000736k/1021952k available (2017k kernel code, 19772k reserved, 918k data, 364k init, 103736k highmem) [ 84.864480] virtual kernel memory layout: [ 84.864480] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 84.864481] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 84.864482] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 84.864483] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 84.864484] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 84.864485] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 84.864485] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 84.864487] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 84.864511] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 84.944409] Calibrating delay using timer specific routine.. 4803.80 BogoMIPS (lpj=9607601) [ 84.944424] Security Framework v1.0.0 initialized [ 84.944428] SELinux: Disabled at boot. [ 84.944436] Mount-cache hash table entries: 512 [ 84.944513] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 84.944518] monitor/mwait feature present. [ 84.944520] using mwait in idle threads. [ 84.944522] CPU: L1 I cache: 32K, L1 D cache: 32K [ 84.944524] CPU: L2 cache: 4096K [ 84.944526] CPU: Physical Processor ID: 0 [ 84.944527] CPU: Processor Core ID: 0 [ 84.944528] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 84.944534] Compat vDSO mapped to ffffe000. [ 84.944542] Checking 'hlt' instruction... OK. [ 84.960462] SMP alternatives: switching to UP code [ 84.960736] Early unpacking initramfs... done [ 85.187716] ACPI: Core revision 20070126 [ 85.187745] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 85.190167] CPU0: Intel Genuine Intel(R) CPU @ 2.40GHz stepping 04 [ 85.190178] SMP alternatives: switching to SMP code [ 85.190228] Booting processor 1/1 eip 3000 [ 85.200493] Initializing CPU#1 [ 85.279914] Calibrating delay using timer specific routine.. 4800.50 BogoMIPS (lpj=9601009) [ 85.279918] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 85.279922] monitor/mwait feature present. [ 85.279924] CPU: L1 I cache: 32K, L1 D cache: 32K [ 85.279925] CPU: L2 cache: 4096K [ 85.279927] CPU: Physical Processor ID: 0 [ 85.279928] CPU: Processor Core ID: 1 [ 85.279929] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 85.280484] CPU1: Intel Genuine Intel(R) CPU @ 2.40GHz stepping 04 [ 85.280499] Total of 2 processors activated (9604.30 BogoMIPS). [ 85.280637] ENABLING IO-APIC IRQs [ 85.280797] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 85.583469] APIC calibration not consistent with PM Timer: 256ms instead of 100ms [ 85.583471] APIC delta adjusted to PM-Timer: 1666723 (4267062) [ 85.583547] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 85.603528] Brought up 2 CPUs [ 85.757223] migration_cost=35 [ 85.757318] Booting paravirtualized kernel on bare hardware [ 85.757365] Time: 21:41:37 Date: 09/03/107 [ 85.757379] NET: Registered protocol family 16 [ 85.757435] EISA bus registered [ 85.757438] ACPI: bus type pci registered [ 85.758736] PCI: Using configuration type 1 [ 85.758737] Setting up standard PCI resources [ 85.763931] ACPI: EC: Look up EC in DSDT [ 85.765199] ACPI: Interpreter enabled [ 85.765202] ACPI: (supports S0 S1 S3 S4 S5) [ 85.765213] ACPI: Using IOAPIC for interrupt routing [ 85.768305] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 85.768322] PCI: Probing PCI hardware (bus 00) [ 85.768993] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 85.768996] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 85.769482] PCI: Transparent bridge - 0000:00:1e.0 [ 85.769539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 85.769788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 85.769953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 85.770025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 85.770095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 85.770165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 85.770236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 85.772738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 85.772802] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 85.772864] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12) [ 85.772925] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 85.772986] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 85.773047] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) [ 85.773110] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 85.773171] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 85.773250] Linux Plug and Play Support v0.97 (c) Adam Belay [ 85.773256] pnp: PnP ACPI init [ 85.773262] ACPI: bus type pnp registered [ 85.775094] pnp: PnP ACPI: found 13 devices [ 85.775096] ACPI: ACPI bus type pnp unregistered [ 85.775099] PnPBIOS: Disabled by ACPI PNP [ 85.775128] PCI: Using ACPI for IRQ routing [ 85.775129] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 85.775216] NET: Registered protocol family 8 [ 85.775217] NET: Registered protocol family 20 [ 85.775253] pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved [ 85.775255] pnp: 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 85.775257] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 85.775259] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 85.775264] pnp: 00:06: ioport range 0x500-0x53f has been reserved [ 85.775266] pnp: 00:06: ioport range 0x400-0x47f has been reserved [ 85.775268] pnp: 00:06: ioport range 0x680-0x6ff has been reserved [ 85.779186] Time: tsc clocksource has been installed. [ 85.805439] PCI: Bridge: 0000:00:1c.0 [ 85.805440] IO window: disabled. [ 85.805443] MEM window: 50300000-503fffff [ 85.805446] PREFETCH window: disabled. [ 85.805450] PCI: Bridge: 0000:00:1c.1 [ 85.805451] IO window: disabled. [ 85.805454] MEM window: 50400000-504fffff [ 85.805457] PREFETCH window: disabled. [ 85.805460] PCI: Bridge: 0000:00:1c.2 [ 85.805461] IO window: disabled. [ 85.805465] MEM window: 50500000-505fffff [ 85.805467] PREFETCH window: disabled. [ 85.805471] PCI: Bridge: 0000:00:1c.3 [ 85.805472] IO window: disabled. [ 85.805475] MEM window: 50600000-506fffff [ 85.805478] PREFETCH window: disabled. [ 85.805481] PCI: Bridge: 0000:00:1c.4 [ 85.805482] IO window: disabled. [ 85.805486] MEM window: 50700000-507fffff [ 85.805489] PREFETCH window: disabled. [ 85.805492] PCI: Bridge: 0000:00:1e.0 [ 85.805493] IO window: disabled. [ 85.805497] MEM window: 50000000-500fffff [ 85.805499] PREFETCH window: disabled. [ 85.805516] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 85.805521] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 85.805534] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 85.805538] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 85.805552] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 85.805555] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 85.805569] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 85.805572] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 85.805585] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16 [ 85.805588] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 85.805596] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 85.805604] NET: Registered protocol family 2 [ 85.843307] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 85.843341] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 85.843798] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 85.843969] TCP: Hash tables configured (established 131072 bind 65536) [ 85.843970] TCP reno registered [ 85.855418] checking if image is initramfs... it is [ 86.302730] Switched to high resolution mode on CPU 1 [ 86.303659] Freeing initrd memory: 7057k freed [ 86.304063] audit: initializing netlink socket (disabled) [ 86.304075] audit(1191447697.140:1): initialized [ 86.304139] highmem bounce pool size: 64 pages [ 86.305458] VFS: Disk quotas dquot_6.5.1 [ 86.305490] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 86.305550] io scheduler noop registered [ 86.305552] io scheduler anticipatory registered [ 86.305553] io scheduler deadline registered [ 86.305562] io scheduler cfq registered (default) [ 86.305574] Boot video device is 0000:00:02.0 [ 86.305916] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 86.305948] assign_interrupt_mode Found MSI capability [ 86.305976] Allocate Port Service[0000:00:1c.0:pcie00] [ 86.306001] Allocate Port Service[0000:00:1c.0:pcie02] [ 86.306059] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 86.306090] assign_interrupt_mode Found MSI capability [ 86.306116] Allocate Port Service[0000:00:1c.1:pcie00] [ 86.306137] Allocate Port Service[0000:00:1c.1:pcie02] [ 86.306194] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 86.306226] assign_interrupt_mode Found MSI capability [ 86.306251] Allocate Port Service[0000:00:1c.2:pcie00] [ 86.306274] Allocate Port Service[0000:00:1c.2:pcie02] [ 86.306332] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 86.306370] assign_interrupt_mode Found MSI capability [ 86.306396] Allocate Port Service[0000:00:1c.3:pcie00] [ 86.306417] Allocate Port Service[0000:00:1c.3:pcie02] [ 86.306474] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 86.306506] assign_interrupt_mode Found MSI capability [ 86.306531] Allocate Port Service[0000:00:1c.4:pcie00] [ 86.306551] Allocate Port Service[0000:00:1c.4:pcie02] [ 86.306639] Switched to high resolution mode on CPU 0 [ 86.306688] isapnp: Scanning for PnP cards... [ 86.658982] isapnp: No Plug & Play device found [ 86.672866] Real Time Clock Driver v1.12ac [ 86.672936] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 86.673018] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 86.673472] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 86.673559] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 16 [ 86.673611] 0000:00:03.3: ttyS1 at I/O 0x1150 (irq = 16) is a 16550A [ 86.674012] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 86.674097] input: Macintosh mouse button emulation as /class/input/input0 [ 86.674154] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 86.677005] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 86.677009] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 86.677095] mice: PS/2 mouse device common for all mice [ 86.677164] EISA: Probing bus 0 at eisa.0 [ 86.677168] Cannot allocate resource for EISA slot 1 [ 86.677188] EISA: Detected 0 cards. [ 86.677245] TCP cubic registered [ 86.677254] NET: Registered protocol family 1 [ 86.677267] Using IPI No-Shortcut mode [ 86.677384] Magic number: 11:609:701 [ 86.677537] Freeing unused kernel memory: 364k freed [ 86.718008] input: AT Translated Set 2 keyboard as /class/input/input1 [ 87.814635] AppArmor: AppArmor initialized<5>audit(1191447698.640:2): type=1505 info="AppArmor initialized" pid=1235 [ 87.819891] fuse init (API version 7.8) [ 87.823480] Failure registering capabilities with primary security module. [ 87.849300] ACPI: Processor [CPU0] (supports 8 throttling states) [ 87.849351] ACPI: Processor [CPU1] (supports 8 throttling states) [ 87.849358] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 87.849365] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 88.115309] SCSI subsystem initialized [ 88.177765] libata version 2.21 loaded. [ 88.177786] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 88.177788] Copyright (c) 1999-2006 Intel Corporation. [ 88.177825] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 88.177835] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 88.182259] usbcore: registered new interface driver usbfs [ 88.182273] usbcore: registered new interface driver hub [ 88.182287] usbcore: registered new device driver usb [ 88.182779] USB Universal Host Controller Interface driver v3.0 [ 88.210068] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:20:f4:08:d0 [ 88.213379] Floppy drive(s): fd0 is 1.44M [ 88.230456] FDC 0 is a National Semiconductor PC87306 [ 88.297325] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 88.297368] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 88.297376] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 88.297378] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 88.297471] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 88.297494] uhci_hcd 0000:00:1a.0: irq 17, io base 0x000010a0 [ 88.297573] usb usb1: configuration #1 chosen from 1 choice [ 88.297592] hub 1-0:1.0: USB hub found [ 88.297596] hub 1-0:1.0: 2 ports detected [ 88.399212] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 88.399217] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 88.399220] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 88.399233] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 88.399254] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001080 [ 88.399314] usb usb2: configuration #1 chosen from 1 choice [ 88.399330] hub 2-0:1.0: USB hub found [ 88.399333] hub 2-0:1.0: 2 ports detected [ 88.503046] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22 [ 88.503051] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 88.503053] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 88.503066] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 88.503086] uhci_hcd 0000:00:1d.0: irq 22, io base 0x00001060 [ 88.503150] usb usb3: configuration #1 chosen from 1 choice [ 88.503166] hub 3-0:1.0: USB hub found [ 88.503169] hub 3-0:1.0: 2 ports detected [ 88.606882] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 88.606887] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 88.606889] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 88.606903] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 88.606923] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001040 [ 88.606985] usb usb4: configuration #1 chosen from 1 choice [ 88.607000] hub 4-0:1.0: USB hub found [ 88.607004] hub 4-0:1.0: 2 ports detected [ 88.710739] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 88.760406] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[50004000-500047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 88.760448] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 88.760455] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 88.760458] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 88.760473] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 88.760494] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001020 [ 88.760561] usb usb5: configuration #1 chosen from 1 choice [ 88.760577] hub 5-0:1.0: USB hub found [ 88.760581] hub 5-0:1.0: 2 ports detected [ 88.862703] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 88.862710] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 88.862713] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 88.862730] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 88.862751] ehci_hcd 0000:00:1a.7: debug port 1 [ 88.862756] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 88.862759] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x50226400 [ 88.866640] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 88.866690] usb usb6: configuration #1 chosen from 1 choice [ 88.866707] hub 6-0:1.0: USB hub found [ 88.866711] hub 6-0:1.0: 4 ports detected [ 88.970343] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22 [ 88.970352] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 88.970354] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 88.970369] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 88.970389] ehci_hcd 0000:00:1d.7: debug port 1 [ 88.970395] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 88.970399] ehci_hcd 0000:00:1d.7: irq 22, io mem 0x50226000 [ 88.974265] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 88.974315] usb usb7: configuration #1 chosen from 1 choice [ 88.974332] hub 7-0:1.0: USB hub found [ 88.974336] hub 7-0:1.0: 6 ports detected [ 89.078163] ata_piix 0000:00:1f.2: version 2.11 [ 89.078168] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 89.078183] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 89.078204] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 89.078248] scsi0 : ata_piix [ 89.078272] scsi1 : ata_piix [ 89.078334] ata1: SATA max UDMA/133 cmd 0x00011148 ctl 0x0001117e bmdma 0x00011110 irq 19 [ 89.078336] ata2: SATA max UDMA/133 cmd 0x00011140 ctl 0x0001117a bmdma 0x00011118 irq 19 [ 89.242176] ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 [ 89.242178] ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 89.258167] ata1.00: configured for UDMA/133 [ 89.733242] ata2.00: ATAPI: PLEXTOR DVDR PX-716A, 1.09, max UDMA/66 [ 89.733243] ata2.00: applying bridge limits [ 89.897009] ata2.00: configured for UDMA/66 [ 89.897075] scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 [ 89.897703] scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-716A 1.09 PQ: 0 ANSI: 5 [ 89.897902] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] [ 89.897916] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19 [ 89.897934] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 89.897950] scsi2 : ata_piix [ 89.898058] scsi3 : ata_piix [ 89.898190] ata3: SATA max UDMA/133 cmd 0x00011138 ctl 0x00011176 bmdma 0x000110f0 irq 19 [ 89.898192] ata4: SATA max UDMA/133 cmd 0x00011130 ctl 0x00011172 bmdma 0x000110f8 irq 19 [ 90.028682] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0002b30037134437] [ 90.241490] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 90.241500] sd 0:0:0:0: [sda] Write Protect is off [ 90.241502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 90.241512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 90.241542] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 90.241548] sd 0:0:0:0: [sda] Write Protect is off [ 90.241550] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 90.241559] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 90.241562] sda: sda1 sda2 < sda5 > [ 90.265534] sd 0:0:0:0: [sda] Attached SCSI disk [ 90.268192] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 90.268204] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 90.275845] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 90.275847] Uniform CD-ROM driver Revision: 3.20 [ 90.275874] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 90.446062] Attempting manual resume [ 90.446063] swsusp: Resume From Partition 8:5 [ 90.446065] PM: Checking swsusp image. [ 90.446187] PM: Resume from disk failed. [ 90.477841] kjournald starting. Commit interval 5 seconds [ 90.477846] EXT3-fs: mounted filesystem with ordered data mode. [ 96.995128] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 97.031195] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 97.048568] Linux agpgart interface v0.102 (c) Dave Jones [ 97.051309] agpgart: Detected an Intel 965G Chipset. [ 97.052698] agpgart: Detected 7676K stolen memory. [ 97.063731] agpgart: AGP aperture is 256M @ 0x40000000 [ 97.113013] input: PC Speaker as /class/input/input2 [ 97.118964] heci: Intel(R) AMT Management Interface - version 3.1.0.17 [ 97.118967] heci: Copyright (c) 2003 - 2007 Intel Corporation. [ 97.120189] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 97.120194] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 97.123426] heci: link layer has been established. [ 97.141634] iTCO_vendor_support: vendor-support=0 [ 97.146382] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 97.226109] heci: heci driver initialization successful. [ 97.395186] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23 [ 97.395200] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 97.692774] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... [ 97.989856] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 [ 97.994317] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460) [ 97.994347] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 97.994429] parport_pc 00:08: reported by Plug and Play ACPI [ 97.994504] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 98.437872] loop: module loaded [ 98.460410] lp0: using parport0 (interrupt-driven). [ 98.535209] Adding 2947888k swap on /dev/sda5. Priority:-1 extents:1 across:2947888k [ 98.808883] EXT3 FS on sda1, internal journal [ 99.486022] input: Power Button (FF) as /class/input/input4 [ 99.486040] ACPI: Power Button (FF) [PWRF] [ 99.486070] input: Sleep Button (CM) as /class/input/input5 [ 99.486085] ACPI: Sleep Button (CM) [SLPB] [ 99.579920] No dock devices found. [ 100.884882] e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 100.909540] NET: Registered protocol family 10 [ 100.909647] lo: Disabled Privacy Extensions [ 101.088084] ppdev: user-space parallel port driver [ 101.381345] audit(1191447712.872:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5276 profile="/usr/sbin/cupsd" [ 101.454473] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 101.454476] apm: disabled - APM is not SMP safe. [ 101.634867] Failure registering capabilities with primary security module. [ 101.771805] Bluetooth: Core ver 2.11 [ 101.771904] NET: Registered protocol family 31 [ 101.771906] Bluetooth: HCI device and connection manager initialized [ 101.771909] Bluetooth: HCI socket layer initialized [ 101.814331] Bluetooth: L2CAP ver 2.8 [ 101.814334] Bluetooth: L2CAP socket layer initialized [ 101.861739] Bluetooth: RFCOMM socket layer initialized [ 101.861796] Bluetooth: RFCOMM TTY layer initialized [ 101.861799] Bluetooth: RFCOMM ver 1.8 [ 104.433217] [drm] Initialized drm 1.1.0 20060810 [ 104.434457] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 104.435344] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 105.775102] NET: Registered protocol family 17 [ 120.645711] eth1: no IPv6 routers present [ 217.700528] ACPI: PCI interrupt for device 0000:00:19.0 disabled [ 219.544569] PM: suspend-to-disk mode set to 'shutdown' [ 219.544939] swsusp: Basic memory bitmaps created [ 219.544943] Stopping tasks ... done. [ 219.599532] Shrinking memory... -done (0 pages freed) [ 219.632789] Freed 0 kbytes in 0.03 seconds (0.00 MB/s) [ 219.632791] Suspending console(s) [ 219.632818] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 219.820989] usb_device usbdev7.1: PM: suspend 0->1, parent usb7 already 2 [ 219.820993] usb_endpoint usbdev7.1_ep81: PM: suspend 0->1, parent 7-0:1.0 already 2 [ 219.820996] hub 7-0:1.0: PM: suspend 2->1, parent usb7 already 2 [ 219.820999] usb_endpoint usbdev7.1_ep00: PM: suspend 0->1, parent usb7 already 2 [ 219.821002] usb_device usbdev6.1: PM: suspend 0->1, parent usb6 already 2 [ 219.821005] usb_endpoint usbdev6.1_ep81: PM: suspend 0->1, parent 6-0:1.0 already 2 [ 219.821008] hub 6-0:1.0: PM: suspend 2->1, parent usb6 already 2 [ 219.821010] usb_endpoint usbdev6.1_ep00: PM: suspend 0->1, parent usb6 already 2 [ 219.821014] usb_device usbdev5.1: PM: suspend 0->1, parent usb5 already 2 [ 219.821016] usb_endpoint usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2 [ 219.821019] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2 [ 219.821021] usb_endpoint usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2 [ 219.821025] usb_device usbdev4.1: PM: suspend 0->1, parent usb4 already 2 [ 219.821028] usb_endpoint usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2 [ 219.821030] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2 [ 219.821033] usb_endpoint usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2 [ 219.821036] usb_device usbdev3.1: PM: suspend 0->1, parent usb3 already 2 [ 219.821039] usb_endpoint usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2 [ 219.821041] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2 [ 219.821044] usb_endpoint usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2 [ 219.821047] usb_device usbdev2.1: PM: suspend 0->1, parent usb2 already 2 [ 219.821050] usb_endpoint usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2 [ 219.821052] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2 [ 219.821055] usb_endpoint usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2 [ 219.821058] usb_device usbdev1.1: PM: suspend 0->1, parent usb1 already 2 [ 219.821061] usb_endpoint usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2 [ 219.821064] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2 [ 219.821066] usb_endpoint usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2 [ 219.821340] pnp: Device 00:0b disabled. [ 219.821384] pnp: Device 00:08 disabled. [ 219.834044] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 219.834119] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 219.834217] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 219.850006] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 219.850032] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 219.850058] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 219.853974] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 219.869985] ACPI: PCI interrupt for device 0000:00:1a.7 disabled [ 219.885969] ACPI: PCI interrupt for device 0000:00:1a.1 disabled [ 219.885995] ACPI: PCI interrupt for device 0000:00:1a.0 disabled [ 219.902008] Disabling non-boot CPUs ... [ 220.017797] CPU 1 is now offline [ 220.017800] SMP alternatives: switching to UP code [ 220.018295] CPU1 is down [ 220.018297] PM: snapshotting memory. [ 220.018448] swsusp: critical section: [ 220.040866] swsusp: Need to copy 103442 pages [ 220.040870] swsusp: Normal pages needed: 103306 + 1024 + 24, available pages: 151728 [ 55.789702] PM: Image restored successfully. [ 55.804388] Enabling non-boot CPUs ... [ 56.239572] SMP alternatives: switching to SMP code [ 56.239679] Booting processor 1/1 eip 3000 [ 56.250084] Initializing CPU#1 [ 56.327406] Calibrating delay using timer specific routine.. 4802.56 BogoMIPS (lpj=9605130) [ 56.327411] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 56.327415] monitor/mwait feature present. [ 56.327417] CPU: L1 I cache: 32K, L1 D cache: 32K [ 56.327418] CPU: L2 cache: 4096K [ 56.327420] CPU: Physical Processor ID: 0 [ 56.327421] CPU: Processor Core ID: 1 [ 56.327422] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 56.328046] CPU1: Intel Genuine Intel(R) CPU @ 2.40GHz stepping 04 [ 56.328063] checking TSC synchronization [CPU#0 -> CPU#1]: [ 56.348037] Measured 70371052002 cycles TSC warp between CPUs, turning off TSC clock. [ 135.136000] Marking TSC unstable due to: check_tsc_sync_source failed. [ 135.156000] Time: acpi_pm clocksource has been installed. [ 135.156000] CPU1 is up [ 135.160000] Switched to high resolution mode on CPU 1 [ 135.164000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 135.164000] PM: Writing back config space on device 0000:00:03.0 at offset 1 (was 180006, writing 100006) [ 135.164000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 135.164000] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 135.180000] PM: Writing back config space on device 0000:00:19.0 at offset 1 (was 100000, writing 100003) [ 135.180000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 135.180000] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 135.180000] usb usb1: root hub lost power or was reset [ 135.180000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 135.180000] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 135.180000] usb usb2: root hub lost power or was reset [ 135.196000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 135.196000] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 135.196000] usb usb6: root hub lost power or was reset [ 135.196000] ehci_hcd 0000:00:1a.7: debug port 1 [ 135.196000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 135.212000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) [ 135.212000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23 [ 135.212000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 135.300000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 135.300000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 135.300000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 135.300000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 135.300000] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 135.300000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22 [ 135.300000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 135.300000] usb usb3: root hub lost power or was reset [ 135.300000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 135.300000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 135.300000] usb usb4: root hub lost power or was reset [ 135.300000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 135.300000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 135.300000] usb usb5: root hub lost power or was reset [ 135.316000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22 [ 135.316000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 135.316000] usb usb7: root hub lost power or was reset [ 135.316000] ehci_hcd 0000:00:1d.7: debug port 1 [ 135.316000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 135.316000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 135.320000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007) [ 135.320000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 135.320000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 135.320000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2b00001, writing 2b00005) [ 135.320000] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19 [ 135.320000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 135.336000] PM: Writing back config space on device 0000:06:03.0 at offset f (was 4020100, writing 402010b) [ 135.336000] PM: Writing back config space on device 0000:06:03.0 at offset 5 (was 0, writing 50000000) [ 135.336000] PM: Writing back config space on device 0000:06:03.0 at offset 4 (was 0, writing 50004000) [ 135.336000] PM: Writing back config space on device 0000:06:03.0 at offset 3 (was 0, writing 2010) [ 135.336000] PM: Writing back config space on device 0000:06:03.0 at offset 1 (was 2100000, writing 2100016) [ 135.384000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[50004000-500047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 135.384000] pnp: Device 00:08 activated. [ 135.384000] pnp: Failed to activate device 00:09. [ 135.384000] pnp: Failed to activate device 00:0a. [ 135.384000] pnp: Device 00:0b activated. [ 135.552000] ata1.00: configured for UDMA/133 [ 135.552000] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 135.552000] sd 0:0:0:0: [sda] Write Protect is off [ 135.552000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 135.552000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 135.796000] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 failed (Emask=0x1 Stat=0x41 Err=0x04) [ 135.796000] ata2.00: revalidation failed (errno=-5) [ 135.796000] ata2: failed to recover some devices, retrying in 5 secs [ 136.596000] sd 0:0:0:0: [sda] Starting disk [ 136.612000] Restarting tasks ... done. [ 136.616000] swsusp: Basic memory bitmaps freed [ 136.968000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 136.968000] Copyright (c) 1999-2006 Intel Corporation. [ 136.972000] PCI: Enabling device 0000:00:19.0 (0000 -> 0003) [ 136.972000] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 136.972000] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 137.000000] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:20:f4:08:d0 [ 137.088000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 137.100000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 137.480000] input: Power Button (FF) as /class/input/input6 [ 137.480000] ACPI: Power Button (FF) [PWRF] [ 137.480000] input: Sleep Button (CM) as /class/input/input7 [ 137.480000] ACPI: Sleep Button (CM) [SLPB] [ 139.372000] e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 139.372000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 141.276000] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 failed (Emask=0x1 Stat=0x41 Err=0x04) [ 141.276000] ata2.00: ACPI on devcfg failed the second time, disabling (errno=-5) [ 141.276000] ata2.00: revalidation failed (errno=1) [ 141.276000] ata2: failed to recover some devices, retrying in 5 secs [ 146.920000] ata2.00: configured for UDMA/66 [ 156.012000] eth1: no IPv6 routers present