[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6810 [ 0.000000] Entering add_active_range(0, 0, 523984) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523984 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523984 [ 0.000000] On node 0 totalpages: 523984 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292307 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F67E0 checksum 0 [ 0.000000] ACPI: RSDP 000F67E0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7FED1545, 0084 (r1 LENOVO TP-79 2170 LTP 0) [ 0.000000] ACPI: FACP 7FED1600, 00F4 (r3 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 7FED195E, D3C2 (r1 LENOVO TP-79 2170 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEF4000, 0040 [ 0.000000] ACPI: SSDT 7FED17B4, 01AA (r1 LENOVO TP-79 2170 MSFT 100000E) [ 0.000000] ACPI: ECDT 7FEDED20, 0052 (r1 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: TCPA 7FEDED72, 0032 (r2 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: APIC 7FEDEDA4, 0068 (r1 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: MCFG 7FEDEE0C, 003C (r1 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: HPET 7FEDEE48, 0038 (r1 LENOVO TP-79 2170 LNVO 1) [ 0.000000] ACPI: BOOT 7FEDEFD8, 0028 (r1 LENOVO TP-79 2170 LTP 1) [ 0.000000] ACPI: SSDT 7FEF2697, 025F (r1 LENOVO TP-79 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF28F6, 00A6 (r1 LENOVO TP-79 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF299C, 04F7 (r1 LENOVO TP-79 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7FEF2E93, 01D8 (r1 LENOVO TP-79 2170 INTL 20050513) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519891 [ 0.000000] Kernel command line: root=/dev/mapper/vg_slow-usr ro quiet vga=793 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2161.312 MHz processor. [ 13.884498] Console: colour dummy device 80x25 [ 13.884504] console [tty0] enabled [ 13.884777] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 13.885307] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 14.085361] Memory: 2065468k/2095936k available (2157k kernel code, 29188k reserved, 998k data, 364k init, 1178432k highmem) [ 14.085375] virtual kernel memory layout: [ 14.085377] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 14.085379] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 14.085381] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 14.085383] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 14.085385] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 14.085388] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 14.085390] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 14.085396] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 14.085450] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 14.085580] hpet clockevent registered [ 14.165452] Calibrating delay using timer specific routine.. 4328.35 BogoMIPS (lpj=8656702) [ 14.165485] Security Framework initialized [ 14.165494] SELinux: Disabled at boot. [ 14.165516] AppArmor: AppArmor initialized [ 14.165522] Failure registering capabilities with primary security module. [ 14.165535] Mount-cache hash table entries: 512 [ 14.165713] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 14.165728] monitor/mwait feature present. [ 14.165731] using mwait in idle threads. [ 14.165738] CPU: L1 I cache: 32K, L1 D cache: 32K [ 14.165742] CPU: L2 cache: 2048K [ 14.165746] CPU: Physical Processor ID: 0 [ 14.165749] CPU: Processor Core ID: 0 [ 14.165752] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 14.165767] Compat vDSO mapped to ffffe000. [ 14.165785] Checking 'hlt' instruction... OK. [ 14.182012] SMP alternatives: switching to UP code [ 14.184838] Early unpacking initramfs... done [ 14.829382] ACPI: Core revision 20070126 [ 14.829544] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 14.863180] CPU0: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 14.863206] SMP alternatives: switching to SMP code [ 14.864204] Booting processor 1/1 eip 3000 [ 14.874872] Initializing CPU#1 [ 14.952393] Calibrating delay using timer specific routine.. 4322.62 BogoMIPS (lpj=8645249) [ 14.952404] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 14.952413] monitor/mwait feature present. [ 14.952418] CPU: L1 I cache: 32K, L1 D cache: 32K [ 14.952422] CPU: L2 cache: 2048K [ 14.952425] CPU: Physical Processor ID: 0 [ 14.952428] CPU: Processor Core ID: 1 [ 14.952430] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 14.952910] CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 14.952944] Total of 2 processors activated (8650.97 BogoMIPS). [ 14.953146] ENABLING IO-APIC IRQs [ 14.953363] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 15.100022] checking TSC synchronization [CPU#0 -> CPU#1]: [ 15.120001] Measured 615186 cycles TSC warp between CPUs, turning off TSC clock. [ 15.120006] Marking TSC unstable due to: check_tsc_sync_source failed. [ 15.120023] Brought up 2 CPUs [ 15.120059] CPU0 attaching sched-domain: [ 15.120064] domain 0: span 03 [ 15.120067] groups: 01 02 [ 15.120073] CPU1 attaching sched-domain: [ 15.120076] domain 0: span 03 [ 15.120079] groups: 02 01 [ 15.120737] net_namespace: 64 bytes [ 15.120747] Booting paravirtualized kernel on bare hardware [ 15.121547] Time: 23:38:45 Date: 04/17/08 [ 15.121590] NET: Registered protocol family 16 [ 15.121917] EISA bus registered [ 15.121924] ACPI: bus type pci registered [ 15.122203] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24 [ 15.122207] PCI: Using configuration type 1 [ 15.122210] Setting up standard PCI resources [ 15.129113] ACPI: EC: EC description table is found, configuring boot EC [ 15.140962] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 15.145178] ACPI: Interpreter enabled [ 15.145183] ACPI: (supports S0 S3 S4 S5) [ 15.145207] ACPI: Using IOAPIC for interrupt routing [ 15.159555] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 15.159560] ACPI: EC: driver started in poll mode [ 15.159880] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.160847] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 15.160854] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 15.162653] PCI: Transparent bridge - 0000:00:1e.0 [ 15.162788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.163099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 15.163319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 15.163546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 15.163779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 15.164012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 15.164243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 15.169383] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 15.169761] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 15.170136] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 15.170510] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 15.170883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 15.171257] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 15.171631] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 15.172013] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 15.172289] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 15.172472] ACPI: Power Resource [PUBS] (on) [ 15.172576] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.172628] pnp: PnP ACPI init [ 15.172640] ACPI: bus type pnp registered [ 15.174860] pnpacpi: exceeded the max number of mem resources: 12 [ 15.179987] pnp: PnP ACPI: found 12 devices [ 15.179992] ACPI: ACPI bus type pnp unregistered [ 15.179997] PnPBIOS: Disabled by ACPI PNP [ 15.180668] PCI: Using ACPI for IRQ routing [ 15.180673] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.272052] NET: Registered protocol family 8 [ 15.272056] NET: Registered protocol family 20 [ 15.272111] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 15.272119] hpet0: 3 64-bit timers, 14318180 Hz [ 15.273170] AppArmor: AppArmor Filesystem Enabled [ 15.275571] Time: hpet clocksource has been installed. [ 15.275594] Switched to high resolution mode on CPU 0 [ 15.276043] Switched to high resolution mode on CPU 1 [ 15.288561] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 15.288567] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 15.288572] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 15.288578] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 15.288583] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 15.288588] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 15.288593] system 00:00: iomem range 0x0-0x0 could not be reserved [ 15.288598] system 00:00: iomem range 0x0-0x0 could not be reserved [ 15.288603] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 15.288608] system 00:00: iomem range 0xe0000-0xe3fff has been reserved [ 15.288613] system 00:00: iomem range 0xe4000-0xe7fff has been reserved [ 15.288619] system 00:00: iomem range 0xe8000-0xebfff has been reserved [ 15.288630] system 00:02: ioport range 0x164e-0x164f has been reserved [ 15.288635] system 00:02: ioport range 0x1000-0x107f has been reserved [ 15.288640] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 15.288645] system 00:02: ioport range 0x800-0x80f has been reserved [ 15.288650] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 15.288656] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 15.288662] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 15.288668] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 15.288673] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 15.288679] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 15.288684] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved [ 15.319386] PCI: Bridge: 0000:00:01.0 [ 15.319391] IO window: 2000-2fff [ 15.319397] MEM window: ee100000-ee1fffff [ 15.319402] PREFETCH window: d0000000-dfffffff [ 15.319408] PCI: Bridge: 0000:00:1c.0 [ 15.319413] IO window: 3000-3fff [ 15.319420] MEM window: ee000000-ee0fffff [ 15.319426] PREFETCH window: disabled. [ 15.319442] PCI: Bridge: 0000:00:1c.1 [ 15.319446] IO window: 4000-5fff [ 15.319454] MEM window: ec000000-edffffff [ 15.319461] PREFETCH window: e4000000-e40fffff [ 15.319468] PCI: Bridge: 0000:00:1c.2 [ 15.319473] IO window: 6000-7fff [ 15.319481] MEM window: e8000000-e9ffffff [ 15.319487] PREFETCH window: e4100000-e41fffff [ 15.319495] PCI: Bridge: 0000:00:1c.3 [ 15.319499] IO window: 8000-9fff [ 15.319507] MEM window: ea000000-ebffffff [ 15.319514] PREFETCH window: e4200000-e42fffff [ 15.319525] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 15.319529] IO window: 0000a000-0000a0ff [ 15.319537] IO window: 0000a400-0000a4ff [ 15.319544] PREFETCH window: e0000000-e3ffffff [ 15.319552] MEM window: 88000000-8bffffff [ 15.319559] PCI: Bridge: 0000:00:1e.0 [ 15.319563] IO window: a000-dfff [ 15.319571] MEM window: e4300000-e7ffffff [ 15.319577] PREFETCH window: e0000000-e3ffffff [ 15.319602] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.319610] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 15.319640] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 [ 15.319649] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 15.319678] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 15.319687] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 15.319717] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19 [ 15.319726] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 15.319755] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20 [ 15.319764] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 15.319779] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 15.319787] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 15.319810] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.319833] NET: Registered protocol family 2 [ 15.367448] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.367812] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.369009] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 15.369606] TCP: Hash tables configured (established 131072 bind 65536) [ 15.369611] TCP reno registered [ 15.379556] checking if image is initramfs... it is [ 16.655502] Freeing initrd memory: 7839k freed [ 16.655702] Simple Boot Flag at 0x35 set to 0x1 [ 16.657040] audit: initializing netlink socket (disabled) [ 16.657058] audit(1208475526.428:1): initialized [ 16.657105] highmem bounce pool size: 64 pages [ 16.660513] VFS: Disk quotas dquot_6.5.1 [ 16.660645] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 16.660851] io scheduler noop registered [ 16.660855] io scheduler anticipatory registered [ 16.660859] io scheduler deadline registered [ 16.660877] io scheduler cfq registered (default) [ 16.661007] Boot video device is 0000:01:00.0 [ 16.661194] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 16.661245] assign_interrupt_mode Found MSI capability [ 16.661286] Allocate Port Service[0000:00:01.0:pcie00] [ 16.661408] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 16.661476] assign_interrupt_mode Found MSI capability [ 16.661531] Allocate Port Service[0000:00:1c.0:pcie00] [ 16.661587] Allocate Port Service[0000:00:1c.0:pcie02] [ 16.661721] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 16.661789] assign_interrupt_mode Found MSI capability [ 16.661843] Allocate Port Service[0000:00:1c.1:pcie00] [ 16.661901] Allocate Port Service[0000:00:1c.1:pcie02] [ 16.662036] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 16.662104] assign_interrupt_mode Found MSI capability [ 16.662161] Allocate Port Service[0000:00:1c.2:pcie00] [ 16.662219] Allocate Port Service[0000:00:1c.2:pcie02] [ 16.662359] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 16.662427] assign_interrupt_mode Found MSI capability [ 16.662481] Allocate Port Service[0000:00:1c.3:pcie00] [ 16.662537] Allocate Port Service[0000:00:1c.3:pcie02] [ 16.662937] isapnp: Scanning for PnP cards... [ 17.017931] isapnp: No Plug & Play device found [ 17.064769] Real Time Clock Driver v1.12ac [ 17.064921] hpet_resources: 0xfed00000 is busy [ 17.064987] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.067073] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.067187] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 17.067359] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 17.074600] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.074609] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.092489] mice: PS/2 mouse device common for all mice [ 17.092673] EISA: Probing bus 0 at eisa.0 [ 17.092683] Cannot allocate resource for EISA slot 1 [ 17.092687] Cannot allocate resource for EISA slot 2 [ 17.092691] Cannot allocate resource for EISA slot 3 [ 17.092695] Cannot allocate resource for EISA slot 4 [ 17.092698] Cannot allocate resource for EISA slot 5 [ 17.092702] Cannot allocate resource for EISA slot 6 [ 17.092706] Cannot allocate resource for EISA slot 7 [ 17.092710] Cannot allocate resource for EISA slot 8 [ 17.092713] EISA: Detected 0 cards. [ 17.092718] cpuidle: using governor ladder [ 17.092721] cpuidle: using governor menu [ 17.092850] NET: Registered protocol family 1 [ 17.092895] Using IPI No-Shortcut mode [ 17.092938] registered taskstats version 1 [ 17.093107] Magic number: 4:287:656 [ 17.093225] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 17.093229] EDD information not available. [ 17.093448] Freeing unused kernel memory: 364k freed [ 17.097967] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 17.260551] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 5120k, total 16384k [ 17.260558] vesafb: mode is 1280x1024x16, linelength=2560, pages=5 [ 17.260563] vesafb: protected mode interface info at c000:afd4 [ 17.260567] vesafb: pmi: set display start = c00cb05c, set palette = c00cb118 [ 17.260571] vesafb: scrolling: redraw [ 17.260575] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0 [ 17.260775] Console: switching to colour frame buffer device 160x64 [ 17.313072] fb0: VESA VGA frame buffer device [ 17.530733] fuse init (API version 7.9) [ 17.559201] ACPI: SSDT 7FEF1D36, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 17.559722] ACPI: SSDT 7FEF203D, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 17.564400] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 17.564409] ACPI: Processor [CPU0] (supports 8 throttling states) [ 17.564823] ACPI: SSDT 7FEF1C6E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 17.565316] ACPI: SSDT 7FEF1FB8, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 17.568220] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 17.568229] ACPI: Processor [CPU1] (supports 8 throttling states) [ 17.571680] ACPI: Thermal Zone [THM0] (57 C) [ 17.574065] ACPI: Thermal Zone [THM1] (55 C) [ 17.604107] device-mapper: uevent: version 1.0.3 [ 17.604207] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 18.174624] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 18.174630] Copyright (c) 1999-2006 Intel Corporation. [ 18.174773] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.174793] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 18.245012] e1000: 0000:02:00.0: e1000_probe: The EEPROM Checksum Is Not Valid [ 18.265823] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 18.275599] e1000: probe of 0000:02:00.0 failed with error -5 [ 18.291648] usbcore: registered new interface driver usbfs [ 18.291682] usbcore: registered new interface driver hub [ 18.291727] usbcore: registered new device driver usb [ 18.293702] USB Universal Host Controller Interface driver v3.0 [ 18.293767] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.293781] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 18.293788] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 18.294078] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 18.294121] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 18.294334] usb usb1: configuration #1 chosen from 1 choice [ 18.294381] hub 1-0:1.0: USB hub found [ 18.294389] hub 1-0:1.0: 2 ports detected [ 18.395519] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 18.395536] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 18.395543] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 18.395581] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 18.395622] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 18.395808] usb usb2: configuration #1 chosen from 1 choice [ 18.395848] hub 2-0:1.0: USB hub found [ 18.395857] hub 2-0:1.0: 2 ports detected [ 18.415411] SCSI subsystem initialized [ 18.487594] libata version 3.00 loaded. [ 18.499329] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 18.499345] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 18.499352] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 18.499388] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 18.499429] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 18.499614] usb usb3: configuration #1 chosen from 1 choice [ 18.499654] hub 3-0:1.0: USB hub found [ 18.499663] hub 3-0:1.0: 2 ports detected [ 18.603188] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 18.603205] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 18.603212] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 18.603249] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 18.603290] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 18.603484] usb usb4: configuration #1 chosen from 1 choice [ 18.603524] hub 4-0:1.0: USB hub found [ 18.603534] hub 4-0:1.0: 2 ports detected [ 18.707453] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 18.707472] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 18.707478] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 18.707521] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 18.711430] ehci_hcd 0000:00:1d.7: debug port 1 [ 18.711440] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 18.711450] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000 [ 18.725524] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.725709] usb usb5: configuration #1 chosen from 1 choice [ 18.725750] hub 5-0:1.0: USB hub found [ 18.725759] hub 5-0:1.0: 8 ports detected [ 18.829774] ahci 0000:00:1f.2: version 3.0 [ 18.829811] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 18.829872] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports [ 18.829877] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf [ 19.354468] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 19.356350] Clocksource tsc unstable (delta = -364148913 ns) [ 19.376464] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 19.376473] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 19.376482] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 19.376857] scsi0 : ahci [ 19.377243] scsi1 : ahci [ 19.377485] scsi2 : ahci [ 19.377726] scsi3 : ahci [ 19.377838] ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 218 [ 19.377844] ata2: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404580 irq 218 [ 19.377850] ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404600 irq 218 [ 19.377856] ata4: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404680 irq 218 [ 19.384413] usb 4-1: configuration #1 chosen from 1 choice [ 19.463050] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 19.529703] usb 4-2: configuration #1 chosen from 1 choice [ 19.549335] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.550466] ata1.00: ATA-7: HTS721010G9SA00, MCZIC10H, max UDMA/100 [ 19.550472] ata1.00: 195371568 sectors, multi 16: LBA48 [ 19.551843] ata1.00: configured for UDMA/100 [ 19.597479] ata2: SATA link down (SStatus 0 SControl 0) [ 19.641684] ata3: SATA link down (SStatus 0 SControl 0) [ 19.685183] ata4: SATA link down (SStatus 0 SControl 0) [ 19.685723] scsi 0:0:0:0: Direct-Access ATA HTS721010G9SA00 MCZI PQ: 0 ANSI: 5 [ 19.690943] ata_piix 0000:00:1f.1: version 2.12 [ 19.690966] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 19.691013] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 19.691107] scsi4 : ata_piix [ 19.691183] scsi5 : ata_piix [ 19.692454] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 19.692460] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 19.702658] Driver 'sd' needs updating - please use bus_type methods [ 19.702767] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 19.702788] sd 0:0:0:0: [sda] Write Protect is off [ 19.702792] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.702822] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.702896] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 19.702914] sd 0:0:0:0: [sda] Write Protect is off [ 19.702919] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.702947] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.702953] sda:<6>ata5.00: ATAPI: MATSHITADVD-RAM UJ-842, RB01, max UDMA/33 [ 20.030842] sda1 sda2 sda3 sda4 [ 20.031049] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.040505] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.185138] ata5.00: configured for UDMA/33 [ 20.185228] ata6: port disabled. ignoring. [ 20.187151] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842 RB01 PQ: 0 ANSI: 5 [ 20.187296] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 20.205212] Driver 'sr' needs updating - please use bus_type methods [ 20.212193] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 20.212201] Uniform CD-ROM driver Revision: 3.20 [ 20.212296] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 28.231471] Attempting manual resume [ 28.231477] swsusp: Resume From Partition 254:9 [ 28.231481] PM: Checking swsusp image. [ 28.236765] PM: Resume from disk failed. [ 28.250646] JFS: nTxBlock = 8192, nTxLock = 65536 [ 39.247251] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 39.287282] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.328346] Linux agpgart interface v0.102 [ 39.606600] iTCO_vendor_support: vendor-support=0 [ 39.666471] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 39.666656] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 39.666731] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 39.898056] intel_rng: FWH not detected [ 40.173733] input: Power Button (FF) as /devices/virtual/input/input2 [ 40.189523] ACPI: Power Button (FF) [PWRF] [ 40.189683] input: Lid Switch as /devices/virtual/input/input3 [ 40.189959] ACPI: Lid Switch [LID] [ 40.190067] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 40.205501] ACPI: Sleep Button (CM) [SLPB] [ 40.795091] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 40.816411] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 40.818950] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6 [ 40.848396] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 41.254960] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 41.399699] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes. [ 41.399765] [fglrx] ASYNCIO init succeed! [ 41.401513] [fglrx] PAT is enabled successfully! [ 41.402583] [fglrx] module loaded - fglrx 8.45.5 [Feb 1 2008] on minor 0 [ 42.649342] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] [ 42.649374] Yenta: Using INTVAL to route CSC interrupts to PCI [ 42.649377] Yenta: Routing CardBus interrupts to PCI [ 42.649386] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 [ 42.881688] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 42.881695] Socket status: 30000007 [ 42.881700] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff [ 42.881705] cs: IO port probe 0xa000-0xdfff: clean. [ 42.883600] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 42.883605] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 42.974463] Bluetooth: Core ver 2.11 [ 43.024653] NET: Registered protocol family 31 [ 43.024658] Bluetooth: HCI device and connection manager initialized [ 43.024665] Bluetooth: HCI socket layer initialized [ 43.085569] ACPI: AC Adapter [AC] (off-line) [ 43.240951] ACPI: Battery Slot [BAT0] (battery present) [ 43.432443] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 43.510842] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 43.510853] hda_intel: probe_mask set to 0x1 for device 17aa:2010 [ 43.510885] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 43.678018] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 43.678025] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 43.678184] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21 [ 43.678203] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 43.678231] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 43.682008] Bluetooth: HCI USB driver ver 2.9 [ 43.684835] usbcore: registered new interface driver hci_usb [ 43.731430] Non-volatile memory driver v1.2 [ 43.831476] irda_init() [ 43.831505] NET: Registered protocol family 23 [ 44.509107] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 44.509116] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 44.552694] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 44.618595] nsc-ircc 00:0a: activated [ 44.618603] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 44.618635] nsc-ircc, chip->init [ 44.618651] nsc-ircc, Found chip at base=0x164e [ 44.618696] nsc-ircc, driver loaded (Dag Brattli) [ 44.619083] IrDA: Registered device irda0 [ 44.619087] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 44.619352] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 44.619356] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 44.619360] thinkpad_acpi: ThinkPad BIOS 79ETD7WW (2.17 ), EC 79HT50WW-1.07 [ 44.619364] thinkpad_acpi: Lenovo ThinkPad T60p [ 44.619872] thinkpad_acpi: radio switch found; radios are enabled [ 44.627036] thinkpad_acpi: standard ACPI backlight interface available, not loading native one... [ 44.627411] input: ThinkPad Extra Buttons as /devices/virtual/input/input9 [ 44.873192] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 44.902044] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 45.076746] cs: IO port probe 0x100-0x3af: clean. [ 45.079187] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 45.080228] cs: IO port probe 0x820-0x8ff: clean. [ 45.081088] cs: IO port probe 0xc00-0xcf7: clean. [ 45.082231] cs: IO port probe 0xa00-0xaff: clean. [ 45.400666] loop: module loaded [ 45.493785] lp: driver loaded but no devices found [ 45.704952] Adding 4194296k swap on /dev/mapper/vg_fast-swap. Priority:-1 extents:1 across:4194296k [ 46.659132] kjournald starting. Commit interval 5 seconds [ 46.660582] EXT3 FS on sda1, internal journal [ 46.660595] EXT3-fs: mounted filesystem with ordered data mode. [ 47.631945] ip_tables: (C) 2000-2006 Netfilter Core Team [ 49.312733] ACPI: ACPI Dock Station Driver [ 49.315464] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 49.315474] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 49.315691] ACPI: Error installing bay notify handler [ 49.315698] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 49.411866] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 49.632990] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10 [ 51.329940] apm: BIOS not found. [ 51.716989] ppdev: user-space parallel port driver [ 52.115985] audit(1208475564.769:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5866 profile="/usr/sbin/cupsd" namespace="default" [ 53.835275] Bluetooth: L2CAP ver 2.9 [ 53.835283] Bluetooth: L2CAP socket layer initialized [ 53.956089] Bluetooth: RFCOMM socket layer initialized [ 53.956106] Bluetooth: RFCOMM TTY layer initialized [ 53.956109] Bluetooth: RFCOMM ver 1.8 [ 55.584783] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 57.636574] [fglrx] Reserve Block - 0 offset = 0Xfffb000 length = 0X5000 [ 57.636578] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 57.636581] [fglrx] Reserve Block - 2 offset = 0Xffbb000 length = 0X40000 [ 57.704177] [fglrx] interrupt source 10000000 successfully enabled [ 57.704183] [fglrx] enable ID = 0x00000008 [ 57.704191] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 71.634287] NET: Registered protocol family 10 [ 71.634743] lo: Disabled Privacy Extensions [ 71.636297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 81.886891] CPU0 attaching NULL sched-domain. [ 81.886898] CPU1 attaching NULL sched-domain. [ 81.897844] CPU0 attaching sched-domain: [ 81.897848] domain 0: span 03 [ 81.897851] groups: 01 02 [ 81.897855] domain 1: span 03 [ 81.897856] groups: 03 [ 81.897860] CPU1 attaching sched-domain: [ 81.897862] domain 0: span 03 [ 81.897865] groups: 02 01 [ 81.897870] domain 1: span 03 [ 81.897872] groups: 03 [ 83.151376] NET: Registered protocol family 17 [ 85.068212] wlan0: Initial auth_alg=0 [ 85.068221] wlan0: authenticate with AP 00:11:50:0f:6c:03 [ 85.069517] wlan0: RX authentication from 00:11:50:0f:6c:03 (alg=0 transaction=2 status=0) [ 85.069526] wlan0: authenticated [ 85.069530] wlan0: associate with AP 00:11:50:0f:6c:03 [ 85.071331] wlan0: authentication frame received from 00:11:50:0f:6c:03, but not in authenticate state - ignored [ 85.072866] wlan0: RX AssocResp from 00:11:50:0f:6c:03 (capab=0x411 status=0 aid=3) [ 85.072874] wlan0: associated [ 85.076195] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 90.530152] wlan0: no IPv6 routers present [ 195.830310] wlan0: deauthenticate(reason=3) [ 196.054140] usb 4-1: USB disconnect, address 2 [ 196.124856] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 197.288896] Syncing filesystems ... done. [ 197.288955] PM: Preparing system for mem sleep [ 197.288958] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 197.289586] Freezing remaining freezable tasks ... (elapsed 0.09 seconds) done. [ 197.386175] PM: Entering mem sleep [ 197.386177] Suspending console(s) [ 197.431741] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 197.431879] sd 0:0:0:0: [sda] Stopping disk [ 197.850943] nsc-ircc 00:0a: disabled [ 197.851509] [fglrx] firegl_gps_setpowerdown . [ 215.626032] BUG: soft lockup - CPU#0 stuck for 11s! [pm-suspend:7510] [ 215.626035] [ 215.626038] Pid: 7510, comm: pm-suspend Tainted: P (2.6.24-16-generic #1) [ 215.626040] EIP: 0060:[] EFLAGS: 00010216 CPU: 0 [ 215.626118] EIP is at __ke_memcpy+0x1d/0x40 [fglrx] [ 215.626120] EAX: 00126000 EBX: f69c11c4 ECX: 0002d96f EDX: f0600000 [ 215.626122] ESI: fd0f0244 EDI: f066fa44 EBP: fd080800 ESP: efe2fe28 [ 215.626124] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 215.626126] CR0: 8005003b CR2: fd400000 CR3: 336f1000 CR4: 00000690 [ 215.626128] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 215.626130] DR6: ffff0ff0 DR7: 00000400 [ 215.626154] [] firegl_cmmqs_save_fb+0x12e/0x200 [fglrx] [ 215.626228] [] firegl_pm_save_framebuffer+0x66/0x70 [fglrx] [ 215.626286] [] firegl_cmmqs_recoverable_surface_info+0x38/0x90 [fglrx] [ 215.626345] [] firegl_cail_powerdown+0x93/0x120 [fglrx] [ 215.626403] [] pci_find_capability+0x33/0x40 [ 215.626416] [] fglrx_pci_suspend+0x44/0xd0 [fglrx] [ 215.626469] [] yenta_dev_suspend+0x7a/0x90 [yenta_socket] [ 215.626480] [] pci_device_suspend+0x23/0x60 [ 215.626490] [] device_suspend+0x14b/0x210 [ 215.626497] [] printk+0x1b/0x20 [ 215.626506] [] suspend_devices_and_enter+0x35/0x100 [ 215.626516] [] enter_state+0x15e/0x190 [ 215.626524] [] state_store+0x92/0xe0 [ 215.626530] [] state_store+0x0/0xe0 [ 215.626536] [] subsys_attr_store+0x32/0x50 [ 215.626544] [] sysfs_write_file+0xc1/0x110 [ 215.626553] [] sysfs_write_file+0x0/0x110 [ 215.626558] [] vfs_write+0xb9/0x170 [ 215.626567] [] sys_write+0x41/0x70 [ 215.626575] [] sysenter_past_esp+0x6b/0xa9 [ 215.626585] [] vcc_getsockopt+0x150/0x170 [ 215.626598] ======================= [ 219.432963] ACPI: PCI interrupt for device 0000:01:00.0 disabled [ 219.435691] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 219.435856] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 219.437145] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 219.437189] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 219.437240] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 219.437273] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 219.438017] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 219.443623] Disabling non-boot CPUs ... [ 219.443640] CPU0 attaching NULL sched-domain. [ 219.443641] CPU1 attaching NULL sched-domain. [ 219.554097] CPU 1 is now offline [ 219.554100] SMP alternatives: switching to UP code [ 219.555314] CPU0 attaching sched-domain: [ 219.555316] domain 0: span 01 [ 219.555318] groups: 01 [ 219.555506] CPU1 is down [ 0.730767] Back to C! [ 0.731372] Enabling non-boot CPUs ... [ 0.731561] CPU0 attaching NULL sched-domain. [ 0.741653] SMP alternatives: switching to SMP code [ 0.742616] Booting processor 1/1 eip 3000 [ 0.753037] Initializing CPU#1 [ 0.833569] Calibrating delay using timer specific routine.. 4320.21 BogoMIPS (lpj=8640427) [ 0.833575] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 0.833580] monitor/mwait feature present. [ 0.833583] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.833585] CPU: L2 cache: 2048K [ 0.833587] CPU: Physical Processor ID: 0 [ 0.833588] CPU: Processor Core ID: 1 [ 0.833589] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 0.833748] CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 0.833790] CPU0 attaching sched-domain: [ 0.833793] domain 0: span 03 [ 0.833794] groups: 01 02 [ 0.833796] domain 1: span 03 [ 0.833797] groups: 03 [ 0.833799] CPU1 attaching sched-domain: [ 0.833800] domain 0: span 03 [ 0.833801] groups: 02 01 [ 0.833803] domain 1: span 03 [ 0.833804] groups: 03 [ 0.834491] CPU1 is up [ 0.838063] Switched to high resolution mode on CPU 1 [ 0.852350] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507) [ 0.852369] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.865542] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [ 0.865565] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 0.865572] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 0.953441] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 180107, writing 100507) [ 0.953490] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.953525] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) [ 0.953573] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.953600] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20007060, writing 7060) [ 0.953611] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) [ 0.953660] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.953670] PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) [ 0.953687] PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) [ 0.953692] PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) [ 0.953698] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 9080) [ 0.953709] PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) [ 0.953715] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) [ 0.953764] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.953773] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.953777] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 0.953838] usb usb1: root hub lost power or was reset [ 0.953862] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 0.953868] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 0.953924] usb usb2: root hub lost power or was reset [ 0.953947] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 0.953954] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 0.954018] usb usb3: root hub lost power or was reset [ 0.954039] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 0.954044] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 0.954109] usb usb4: root hub lost power or was reset [ 0.969943] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 0.969949] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 0.970037] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) [ 0.970057] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.970128] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) [ 0.970138] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 0.970143] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 0.970203] ata6: port disabled. ignoring. [ 0.971445] ata5.01: _GTF evaluation failed (AE 0x1001) [ 0.984986] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) [ 0.985025] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.289136] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 1.289138] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 1.289802] ata5.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 1.290785] ata5.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 1.624331] ata5.00: configured for UDMA/33 [ 1.987723] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.987734] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 2.011127] [fglrx] firegl_gps_setpowerup . [ 2.299292] ata2: SATA link down (SStatus 0 SControl 0) [ 2.299325] ata3: SATA link down (SStatus 0 SControl 0) [ 2.311257] ata4: SATA link down (SStatus 0 SControl 0) [ 2.690463] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100107, writing 100103) [ 2.690652] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100102) [ 2.690723] PM: Writing back config space on device 0000:15:00.0 at offset f (was 34001ff, writing 5c0010b) [ 2.690729] PM: Writing back config space on device 0000:15:00.0 at offset e (was 0, writing a4fc) [ 2.690735] PM: Writing back config space on device 0000:15:00.0 at offset d (was 0, writing a400) [ 2.690741] PM: Writing back config space on device 0000:15:00.0 at offset c (was 0, writing a0fc) [ 2.690747] PM: Writing back config space on device 0000:15:00.0 at offset b (was 0, writing a000) [ 2.690753] PM: Writing back config space on device 0000:15:00.0 at offset a (was 0, writing 8bfff000) [ 2.690759] PM: Writing back config space on device 0000:15:00.0 at offset 9 (was 0, writing 88000000) [ 2.690765] PM: Writing back config space on device 0000:15:00.0 at offset 8 (was 0, writing e3fff000) [ 2.690770] PM: Writing back config space on device 0000:15:00.0 at offset 7 (was 0, writing e0000000) [ 2.690776] PM: Writing back config space on device 0000:15:00.0 at offset 6 (was 0, writing b0171615) [ 2.690784] PM: Writing back config space on device 0000:15:00.0 at offset 4 (was 0, writing e4300000) [ 2.690790] PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 20000, writing 2a820) [ 2.690798] PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007) [ 2.691557] nsc-ircc 00:0a: activated [ 3.051164] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.057004] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 3.057010] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 3.057378] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 3.057727] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded [ 3.061468] ata1.00: configured for UDMA/100 [ 3.070265] ata1.00: configured for UDMA/100 [ 3.070270] ata1: EH complete [ 3.070633] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 3.070645] sd 0:0:0:0: [sda] Write Protect is off [ 3.070647] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.070662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.070677] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 3.070685] sd 0:0:0:0: [sda] Write Protect is off [ 3.070687] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.070700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.252833] sd 0:0:0:0: [sda] Starting disk [ 4.121236] PM: Finishing wakeup. [ 4.121238] Restarting tasks ... <6>usb 4-2: USB disconnect, address 3 [ 4.187246] done. [ 4.324741] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 4.324746] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 4.324883] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21 [ 4.324903] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 4.324923] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 4.457287] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 4.462996] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 4.493998] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4.702245] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4.809677] usb 4-2: new full speed USB device using uhci_hcd and address 4 [ 4.984580] usb 4-2: configuration #1 chosen from 1 choice [ 5.471519] usb 4-1: new full speed USB device using uhci_hcd and address 5 [ 5.640467] usb 4-1: configuration #1 chosen from 1 choice [ 18.766040] wlan0: Initial auth_alg=0 [ 18.766045] wlan0: authenticate with AP 00:11:50:0f:6c:03 [ 18.767297] wlan0: RX authentication from 00:11:50:0f:6c:03 (alg=0 transaction=2 status=0) [ 18.767300] wlan0: authenticated [ 18.767302] wlan0: associate with AP 00:11:50:0f:6c:03 [ 18.769614] wlan0: authentication frame received from 00:11:50:0f:6c:03, but not in authenticate state - ignored [ 18.770701] wlan0: RX AssocResp from 00:11:50:0f:6c:03 (capab=0x411 status=0 aid=3) [ 18.770704] wlan0: associated [ 18.772282] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.779809] wlan0: association frame received from 00:11:50:0f:6c:03, but not in associate state - ignored [ 38.138903] wlan0: no IPv6 routers present [ 693.182171] [fglrx] Disable PAT [ 693.182208] [fglrx] asyncIODestroy finished! [ 693.182423] [fglrx] module unloaded - fglrx 8.45.5 [Feb 1 2008] on minor 0 [ 694.171644] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes. [ 694.171712] [fglrx] ASYNCIO init succeed! [ 694.173474] [fglrx] PAT is enabled successfully! [ 694.173505] [fglrx] module loaded - fglrx 8.45.5 [Feb 1 2008] on minor 0 [ 697.285412] [fglrx] Reserve Block - 0 offset = 0Xfffb000 length = 0X5000 [ 697.285418] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 697.285420] [fglrx] Reserve Block - 2 offset = 0Xffbb000 length = 0X40000 [ 697.344479] [fglrx] interrupt source 10000000 successfully enabled [ 697.344488] [fglrx] enable ID = 0x00000008 [ 697.344501] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000