Hi,

At the moment you can download V4l, make a modification on dvb_usb_dvb.c
(the ugly msleep(1000)) and compile it for you kernel.

Tell me if you want more details ...

rgds,



On Wed, 2007-07-04 at 09:01 +0000, busta wrote:
> I Have the exact same problem on Ubuntu 7.04 x86.
> 
> sudo lspci -vv:
> 
> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
>         Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>         Latency: 0
>         Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>         Capabilities: [e4] Vendor Specific Information
>         Capabilities: [a0] AGP version 3.0
>                 Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>                 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
> 
> 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>         Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> 
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 16
>         Region 4: I/O ports at ef00 [size=32]
> 
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 17
>         Region 4: I/O ports at ef20 [size=32]
> 
> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin C routed to IRQ 18
>         Region 4: I/O ports at ef40 [size=32]
> 
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 16
>         Region 4: I/O ports at ef80 [size=32]
> 
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
>         Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin D routed to IRQ 19
>         Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Debug port
> 
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Bus: primary=00, secondary=02, subordinate=03, sec-latency=64
>         I/O behind bridge: 0000d000-0000dfff
>         Memory behind bridge: fd900000-feafffff
>         Prefetchable memory behind bridge: f3f00000-f7efffff
>         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> 
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
>         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
> 
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
>         Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 18
>         Region 0: I/O ports at 01f0 [size=8]
>         Region 1: I/O ports at 03f4 [size=1]
>         Region 2: I/O ports at 0170 [size=8]
>         Region 3: I/O ports at 0374 [size=1]
>         Region 4: I/O ports at fc00 [size=16]
>         Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
> 
> 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
>         Subsystem: ASUSTeK Computer Inc. P4P800 SE Mainboard
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 18
>         Region 0: I/O ports at efe0 [size=8]
>         Region 1: I/O ports at efac [size=4]
>         Region 2: I/O ports at efa0 [size=8]
>         Region 3: I/O ports at efa8 [size=4]
>         Region 4: I/O ports at ef60 [size=16]
> 
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
>         Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
>         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Interrupt: pin B routed to IRQ 11
>         Region 4: I/O ports at 0400 [size=32]
> 
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
>         Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 22
>         Region 0: I/O ports at e800 [size=256]
>         Region 1: I/O ports at ee80 [size=64]
>         Region 2: Memory at febff800 (32-bit, non-prefetchable) [size=512]
>         Region 3: Memory at febff400 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 02:05.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
>         Subsystem: ASUSTeK Computer Inc. A7V600/P4P800/K8V motherboard
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
>         Interrupt: pin A routed to IRQ 20
>         Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
>         Region 1: I/O ports at d800 [size=256]
>         Capabilities: [48] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>         Capabilities: [50] Vital Product Data
> 
> 02:09.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 15) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64, Cache Line Size: 16 bytes
>         Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
>         Memory behind bridge: fd900000-fe9fffff
>         Prefetchable memory behind bridge: 00000000f3f00000-00000000f7efffff
>         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>         Capabilities: [80] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [90] #06 [0000]
>         Capabilities: [a0] Vital Product Data
> 
> 02:0b.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
>         Subsystem: Avermedia Technologies Inc Unknown device 2c05
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64
>         Interrupt: pin A routed to IRQ 19
>         Region 0: Memory at feafbc00 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [40] Power Management version 1
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 02:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
>         Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.1
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64 (3750ns min, 9500ns max)
>         Interrupt: pin A routed to IRQ 21
>         Region 0: Memory at feafb800 (32-bit, non-prefetchable) [size=512]
> 
> 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 85) (prog-if 00 [VGA])
>         Subsystem: Matrox Graphics, Inc. Millennium G450 32Mb Dual Head PCI
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 16 bytes
>         Interrupt: pin A routed to IRQ 10
>         Region 0: Memory at f4000000 (32-bit, prefetchable) [size=32M]
>         Region 1: Memory at fe9fc000 (32-bit, non-prefetchable) [size=16K]
>         Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
>         Expansion ROM at fe9c0000 [disabled] [size=128K]
>         Capabilities: [dc] Power Management version 2
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [f0] AGP version 2.0
>                 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=<none>
>                 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
> 
> sudo lspci -vvn:
> 
> 00:00.0 0600: 8086:2570 (rev 02)
>         Subsystem: 1043:80f2
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>         Latency: 0
>         Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>         Capabilities: [e4] Vendor Specific Information
>         Capabilities: [a0] AGP version 3.0
>                 Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>                 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
> 
> 00:01.0 0604: 8086:2571 (rev 02) (prog-if 00 [Normal decode])
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>         Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> 
> 00:1d.0 0c03: 8086:24d2 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: 1043:80a6
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 16
>         Region 4: I/O ports at ef00 [size=32]
> 
> 00:1d.1 0c03: 8086:24d4 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: 1043:80a6
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 17
>         Region 4: I/O ports at ef20 [size=32]
> 
> 00:1d.2 0c03: 8086:24d7 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: 1043:80a6
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin C routed to IRQ 18
>         Region 4: I/O ports at ef40 [size=32]
> 
> 00:1d.3 0c03: 8086:24de (rev 02) (prog-if 00 [UHCI])
>         Subsystem: 1043:80a6
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 16
>         Region 4: I/O ports at ef80 [size=32]
> 
> 00:1d.7 0c03: 8086:24dd (rev 02) (prog-if 20 [EHCI])
>         Subsystem: 1043:80a6
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin D routed to IRQ 19
>         Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Debug port
> 
> 00:1e.0 0604: 8086:244e (rev c2) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Bus: primary=00, secondary=02, subordinate=03, sec-latency=64
>         I/O behind bridge: 0000d000-0000dfff
>         Memory behind bridge: fd900000-feafffff
>         Prefetchable memory behind bridge: f3f00000-f7efffff
>         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> 
> 00:1f.0 0601: 8086:24d0 (rev 02)
>         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
> 
> 00:1f.1 0101: 8086:24db (rev 02) (prog-if 8a [Master SecP PriP])
>         Subsystem: 1043:80a6
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 18
>         Region 0: I/O ports at 01f0 [size=8]
>         Region 1: I/O ports at 03f4 [size=1]
>         Region 2: I/O ports at 0170 [size=8]
>         Region 3: I/O ports at 0374 [size=1]
>         Region 4: I/O ports at fc00 [size=16]
>         Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
> 
> 00:1f.2 0101: 8086:24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
>         Subsystem: 1043:80a6
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 18
>         Region 0: I/O ports at efe0 [size=8]
>         Region 1: I/O ports at efac [size=4]
>         Region 2: I/O ports at efa0 [size=8]
>         Region 3: I/O ports at efa8 [size=4]
>         Region 4: I/O ports at ef60 [size=16]
> 
> 00:1f.3 0c05: 8086:24d3 (rev 02)
>         Subsystem: 1043:80a6
>         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Interrupt: pin B routed to IRQ 11
>         Region 4: I/O ports at 0400 [size=32]
> 
> 00:1f.5 0401: 8086:24d5 (rev 02)
>         Subsystem: 1043:80f3
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 22
>         Region 0: I/O ports at e800 [size=256]
>         Region 1: I/O ports at ee80 [size=64]
>         Region 2: Memory at febff800 (32-bit, non-prefetchable) [size=512]
>         Region 3: Memory at febff400 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 02:05.0 0200: 10b7:1700 (rev 12)
>         Subsystem: 1043:80eb
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
>         Interrupt: pin A routed to IRQ 20
>         Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
>         Region 1: I/O ports at d800 [size=256]
>         Capabilities: [48] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>         Capabilities: [50] Vital Product Data
> 
> 02:09.0 0604: 3388:0021 (rev 15) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64, Cache Line Size: 16 bytes
>         Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
>         Memory behind bridge: fd900000-fe9fffff
>         Prefetchable memory behind bridge: 00000000f3f00000-00000000f7efffff
>         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>         Capabilities: [80] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [90] #06 [0000]
>         Capabilities: [a0] Vital Product Data
> 
> 02:0b.0 0480: 1131:7134 (rev 01)
>         Subsystem: 1461:2c05
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64
>         Interrupt: pin A routed to IRQ 19
>         Region 0: Memory at feafbc00 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [40] Power Management version 1
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 02:0c.0 0480: 1131:7146 (rev 01)
>         Subsystem: 13c2:0002
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64 (3750ns min, 9500ns max)
>         Interrupt: pin A routed to IRQ 21
>         Region 0: Memory at feafb800 (32-bit, non-prefetchable) [size=512]
> 
> 03:00.0 0300: 102b:0525 (rev 85) (prog-if 00 [VGA])
>         Subsystem: 102b:0d43
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 16 bytes
>         Interrupt: pin A routed to IRQ 10
>         Region 0: Memory at f4000000 (32-bit, prefetchable) [size=32M]
>         Region 1: Memory at fe9fc000 (32-bit, non-prefetchable) [size=16K]
>         Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
>         Expansion ROM at fe9c0000 [disabled] [size=128K]
>         Capabilities: [dc] Power Management version 2
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [f0] AGP version 2.0
>                 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=<none>
>                 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
> 
> dmesg cold start:
> 
> [   46.659516] dvb-usb: found a 'LITE-ON USB2.0 DVB-T Tuner' in cold state, will try to load a firmware
> [   46.672965] dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw'
> [   46.823303] usbcore: registered new interface driver dvb_usb_dibusb_mc
> [   46.859397] usb 5-3: USB disconnect, address 3
> [   46.859493] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
> 
> dmesg after reboot:
> 
> [   48.348970] dvb-usb: found a 'LITE-ON USB2.0 DVB-T Tuner' in warm state.
> [   48.349194] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
> [   48.353250] DVB: registering new adapter (LITE-ON USB2.0 DVB-T Tuner).
> [   48.354842] DVB: registering frontend 0 (DiBcom 3000MC/P)...
> [   49.106689] input: IR-receiver inside an USB DVB receiver as /class/input/input4
> [   49.106804] dvb-usb: schedule remote query interval to 150 msecs.
> [   49.106863] dvb-usb: LITE-ON USB2.0 DVB-T Tuner successfully initialized and connected.
> [
>