bweinel@sinclair:~$ dmesg [ 0.000000] Linux version 2.6.24-15-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Apr 8 00:33:51 UTC 2008 (Ubuntu 2.6.24-15.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable) [ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 131008) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131008 [ 0.000000] HighMem 131008 -> 131008 [ 0.000000] Movable zone start PFN for each node [ 0.000000 [ 0.000000] 0: 0 -> 131008 [ 0.000000] On node 0 totalpages: 131008 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125921 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FF980 checksum 0 [ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 D850GB GB85010A 20011008 MSFT 1011) [ 0.000000] ACPI: FACP 1FFF1000, 0074 (r1 D850GB GB85010A 20011008 MSFT 1011) [ 0.000000] ACPI: DSDT 1FFE0000, 2E67 (r1 D850GB GB85010A 2 MSFT 100000B) [ 0.000000] ACPI: FACS 1FFF8000, 0040 [ 0.000000] ACPI: APIC 1FFE2E67, 0068 (r1 D850GB GB85010A 20011008 MSFT 1011) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:0 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129985 [ 0.000000] Kernel command line: root=UUID=3634be58-db46-4dae-921e-6fff3026f993 ro quiet nosplash pci-routeirq [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1495.473 MHz processor. [ 12.716684] Console: colour VGA+ 80x25 [ 12.716691] console [tty0] enabled [ 12.717028] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.717424] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 12.738826] Memory: 507156k/524032k available (2164k kernel code, 16312k reserved, 1006k data, 364k init, 0k highmem) [ 12.738843] virtual kernel memory layout: [ 12.738845] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 12.738847] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.738849] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 12.738852] lowmem : 0xc0000000 - 0xdffc0000 ( 511 MB) [ 12.738854] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 12.738856] .data : 0xc031d2ad - 0xc0418dc4 (1006 kB) [ 12.738858] .text : 0xc0100000 - 0xc031d2ad (2164 kB) [ 12.738863] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.738921] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 12.818867] Calibrating delay using timer specific routine.. 2994.78 BogoMIPS (lpj=5989564) [ 12.818908] Security Fram [ 12.818919] SELinux: Disabled at boot. [ 12.818941] AppArmor: AppArmor initialized [ 12.818948] Failure registering capabilities with primary security module. [ 12.818963] Mount-cache hash table entries: 512 [ 12.819196] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.819220] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 12.819226] CPU: L2 cache: 256K [ 12.819230] CPU: Hyper-Threading is disabled [ 12.819234] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000 [ 12.819254] Compat vDSO mapped to ffffe000. [ 12.819278] Checking 'hlt' instruction... OK. [ 12.835697] SMP alternatives: switching to UP code [ 12.839091] Freeing SMP alternatives: 11k freed [ 12.839317] Early unpacking initramfs... done [ 13.466614] ACPI: Core revision 20070126 [ 13.466691] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.471127] CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07 [ 13.471198] Total of 1 processors activated (2994.78 BogoMIPS). [ 13.471350] ENABLING IO-APIC IRQs [ 13.471555] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 13.618144] Brought up 1 CPUs [ 13.618181] CPU0 attaching sched-domain: [ 13.618187] domain 0: span 01 [ 13.618191] groups: 01 [ 13.618530] net_namespace: 64 bytes [ 13.618552] Booting paravirtualized kernel on bare hardware [ 13.619640] Time: 4:38:01 Date: 05/25/08 [ 13.619746] NET: Registered protocol family 16 [ 13.620168] EISA bus registered [ 13.620208] ACPI: bus type pci registered [ 13.620545] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 [ 13.620551] PCI: Using configuration type 1 [ 13.620554] Setting up standard PCI resources [ 13.623626] ACPI: EC: Look up EC in DSDT [ 13.629644] ACPI: Interpreter enabled [ 13.629651] ACPI: (supports S0 S1 S4 S5) [ 13.629677] ACPI: Using IOAPIC for interrupt routing [ 13.637405] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.637730] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 13.637737] PCI quirk: region 0500-053f claimed by ICH4 GPIO [ 13.638497] PCI: Transparent bridge - 0000:00:1e.0 [ 13.638539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.638698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 13.640852] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 13.641017] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 13.641177] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 13.641339] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 13.641499] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 13.641661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 13.641824] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 13.641984] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 13.642228] ACPI: Power Resource [FDDP] (off) [ 13.642280] ACPI: Power Resource [URP1] (off) [ 13.642330] ACPI: Power Resource [URP2] (off) [ 13.642380] ACPI: Power Resource [LPTP] (off) [ 13.642491] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.642564] pnp: PnP ACPI init [ 13.642583] ACPI: bus type pnp registered [ 13.647187] pnp: PnP ACPI: found 12 devices [ 13.647194] ACPI: ACPI bus type pnp unregistered [ 13.647202] PnPBIOS: Disabled by ACPI PNP [ 13.647678] PCI: Using ACPI for IRQ routing [ 13.647686] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.654144] NET: Registered protocol family 8 [ 13.654150] NET: Registered protocol family 20 [ 13.654303] AppArmor: AppArmor Filesystem Enabled [ 13.658023] Time: tsc clocksource has been installed. [ 13.666128] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 13.666135] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 13.666140] system 00 [ 13.666147] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 13.666153] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 13.697009] PCI: Bridge: 0000:00:01.0 [ 13.697017] IO window: c000-cfff [ 13.697024] MEM window: ff800000-ff8fffff [ 13.697030] PREFETCH window: e6900000-f69fffff [ 13.697041] PCI: Bridge: 0000:00:1e.0 [ 13.697046] IO window: d000-dfff [ 13.697054] MEM window: ff900000-ff9fffff [ 13.697060] PREFETCH window: f6a00000-f6afffff [ 13.697085] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.697112] NET: Registered protocol family 2 [ 13.734088] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 13.734589] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 13.734706] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 13.734831] TCP: Hash tables configured (established 16384 bind 16384) [ 13.734838] TCP reno registered [ 13.746210] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 14.329836] it is [ 14.965451] Freeing initrd memory: 7689k freed [ 14.966417] audit: initializing netlink socket (disabled) [ 14.966438] audit(1211690282.124:1): initialized [ 14.970438] VFS: Disk quotas dquot_6.5.1 [ 14.970605] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.970897] io scheduler noop registered [ 14.970902] io scheduler anticipatory registered [ 14.970905] io scheduler deadline registered [ 14.970937] io scheduler cfq registered (default) [ 14.970996] Boot video device is 0000:01:00.0 [ 14.971544] isapnp: Scanning for PnP cards... [ 15.327693] isapnp: No Plug & Play device found [ 15.432805] Real Time Clock Driver v1.12ac [ 15.432983] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.433162] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 15.435035] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 15.436921] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.437060] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 15.437280] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 15.440222] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.440231] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.456140] mice: PS/2 mouse device common for all mice [ 15.456386] EISA: Probing bus 0 at eisa.0 [ 15.456432] EISA: Detected 0 cards. [ 15.456438] cpuidle: using governor ladder [ 15.456441] cpuidle: using governor menu [ 15.456618] NET: Registered protocol family 1 [ 15.456672] Using IPI No-Shortcut mode [ 15.456730] registered taskstats version 1 [ 15.456873] Magic number: 8:873:616 [ 15.456954] hash matches device ptye6 [ 15.457063] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 15.457066] EDD information not available. [ 15.457569] Freeing unused kernel memory: 364k freed [ 15.492012] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 15.870812] fuse init (API version 7.9) [ 15.916554] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 17.046330] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 17.046356] 3c59x: Donald Becker and others. [ 17.046364] 0000:02:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at e083ac00. [ 17.230048] SCSI subsystem initialized [ 17.269317] usbcore: registered new interface driver usbfs [ 17.269363] usbcore: registered new interface driver hub [ 17.283213] usbcore: registered new device driver usb [ 17.314296] USB Universal Host Controller Interface driver v3.0 [ 17.314402] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 17 [ 17.314421] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 17.314430] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 17.314931] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus numb [ 17.314976] uhci_hcd 0000:00:1f.2: irq 17, io base 0x0000ef40 [ 17.315243] usb usb1: configuration #1 chosen from 1 choice [ 17.315288] hub 1-0:1.0: USB hub found [ 17.315299] hub 1-0:1.0: 2 ports detected [ 17.335074] libata version 3.00 loaded. [ 17.417989] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 18 [ 17.418009] PCI: Setting latency timer of device 0000:00:1f.4 to 64 [ 17.418017] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 17.418063] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 17.418100] uhci_hcd 0000:00:1f.4: irq 18, io base 0x0000ef80 [ 17.418303] usb usb2: configuration #1 chosen from 1 choice [ 17.418351] hub 2-0:1.0: USB hub found [ 17.418362] hub 2-0:1.0: 2 ports detected [ 17.451439] Floppy drive(s): fd0 is 1.44M [ 17.469486] FDC 0 is a post-1991 82077 [ 17.522668] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.549740] ata_piix 0000:00:1f.1: version 2.12 [ 17.549827] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.562736] scsi0 : ata_piix [ 17.564984] scsi1 : ata_piix [ 17.566522] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 17.566529] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 17.657551] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 17.766277] ata1.00: ATA-7: ST3802110A, 3.AAE, max UDMA/100 [ 17.766286] ata1.00: 156301488 sectors, multi 16: LBA48 [ 17.832692] ata1.00: configured for UDMA/100 [ 17.837566] usb 1-2: configuration #1 chosen from 1 choice [ 18.477177] ata2.00: ATAPI: LG CD-RW CED-8080B, 1.04, max MWDMA2 [ 18.648768] ata2.00: configured for MWDMA2 [ 18.648979] scsi 0:0:0:0: Direct-Access ATA ST3802110A 3.AA PQ: 0 ANSI: 5 [ 18.649712] scsi 1:0:0:0: CD-ROM LG CD-RW CED-8080B 1.04 PQ: 0 ANSI: 5 [ 18.687709] usbcore: registered new interface driver hiddev [ 18.693660] Driver 'sd' needs updating - please use bus_type methods [ 18.693813] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 18.693838] sd 0:0:0:0: [sda] Write Protect is off [ 18.693844] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.693883] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.693975] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 18.693997] sd 0:0:0:0: [sda] Write Protect is off [ 18.694002] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.694039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.694046] sda:<6>input: ARROW STRONG USB 3D Mouse as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2:1.0/input/input2 [ 18.703364] Driver 'sr' needs updating - please use bus_type methods [ 18.716446] input,hidraw0: USB HID v1.00 Mouse [ARROW STRONG USB 3D Mouse] on usb-0000:00:1f.2-2 [ 18.716478] usbcore: registered new interface driver usbhid [ 18.716485] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 18.718832] sda1 sda2 < sda5 > [ 18.747520] sd 0:0:0:0: [sda] Attached SCSI disk [ 18.760961] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.761000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 18.761912] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 18.761921] Uniform CD-ROM driver Revision: 3.20 [ 18.762019] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 19.268199] Attempting manual resume [ 19.268206] swsusp: Resume From Partition 8:5 [ 19.268210] PM: Checking swsusp image. [ 19.268436] PM: Resume from disk failed. [ 19.339698] kjournald starting. Commit interval 5 seconds [ 19.339719] EXT3-fs: mounted filesystem with ordered data mode. [ 30.295560] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 31.178455] intel_rng: Firmware space is locked read-only. If you can't or [ 31.178461] intel_rng: don't want to disable this in firmware setup, and if [ 31.178464] intel_rng: you are certain that your system has a functional [ 31.178467] intel_rng: RNG, [ 31.262198] Linux agpgart interface v0.102 [ 31.298362] agpgart: Detected an Intel i850 Chipset. [ 31.302577] agpgart: AGP aperture is 64M @ 0xf8000000 [ 31.418060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.471601] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.543110] iTCO_vendor_support: vendor-support=0 [ 31.587104] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 31.587335] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0460) [ 31.587438] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 32.505197] input: Power Button (FF) as /devices/virtual/input/input4 [ 32.520732] ACPI: Power Button (FF) [PWRF] [ 32.520938] input: Power Button (CM) as /devices/virtual/input/input5 [ 32.536718] ACPI: Power Button (CM) [PBTN] [ 33.780644] parport_pc 00:09: reported by Plug and Play ACPI [ 33.780678] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 34.872736] eth0: setting full-duplex. [ 36.005574] NET: Registered protocol family 10 [ 36.006057] lo: Disabled Privacy Extensions [ 36.156371] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 36.361256] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:703: es1371: codec read timeout at 0xdf14 [0x40000000] [ 36.417053] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:703: es1371: codec read timeout at 0xdf14 [0x40000000] [ 36.472830] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:643: codec write timeout at 0xdf14 [0x40000000] [ 36.528714] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:643: codec write timeout at 0xdf14 [0x40000000] [ 37.319159] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:703: es1371: codec read timeout at 0xdf14 [0x40000000] [ 37.360150] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:703: es1371: codec read timeout at 0xdf14 [0x40000000] [ 37.416110] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:703: es1371: codec read timeout at 0xdf14 [0x40000000] [ 37.507002] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:703: es1371: codec read timeout at 0xdf14 [0x40000000] [ 37.547767] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ens1370.c:703: es1371: codec read timeout at 0xdf14 [0x40000000] [ 37.547909] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2070: AC'97 0 access is not valid [0x0], removing mixer. [ 37.583051] ACPI: PCI interrupt for device 0000:02:0b.0 disabled [ 37.583082] ENS1371: probe of 0000:02:0b.0 failed with error -5 [ 39.075248] lp0: using parport0 (interrupt-driven). [ 39.176327] Adding 1510068k swap on /dev/sda5. Priority:-1 extents:1 across:1510068k [ 39.639169] EXT3 FS on sda1, internal journal [ 39.889182] device-mapper: uevent: version 1.0.3 [ 39.889233] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 41.076246] ip_tables: (C) 2000-2006 Netfilter Core Team [ 42.208484] No dock devices found. [ 44.179161] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 44.179170] apm: overridden by ACPI. [ 44.491348] ppdev: user-space parallel port driver [ 44.708514] audit(1211690312.820:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4917 profile="/usr/sbin/cupsd" namespace="default" [ 44.881499] [drm] Initialized drm 1.1.0 20060810 [ 45.004237] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IR [ 45.004530] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 46.029481] eth0: no IPv6 routers present [ 46.918180] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 46.918211] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 46.918235] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 47.431144] [drm] Setting GART location based on new memory map [ 47.431215] [drm] writeback test succeeded in 1 usecs