[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) [ 0.000000] BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000027fc0000 (usable) [ 0.000000] BIOS-e820: 0000000027fc0000 - 0000000027ff8000 (ACPI data) [ 0.000000] BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 639MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 163776) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 163776 [ 0.000000] HighMem 163776 -> 163776 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 163776 [ 0.000000] On node 0 totalpages: 163776 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1247 pages used for memmap [ 0.000000] Normal zone: 158433 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FF980 checksum 0 [ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 27FF0000, 002C (r1 D845HV WN84510A 20030525 MSFT 1011) [ 0.000000] ACPI: FACP 27FF1000, 0074 (r1 D845HV HV84510A 20030525 MSFT 1011) [ 0.000000] ACPI: DSDT 27FE0000, 2EA2 (r2 D845HV HV84510A 6 MSFT 100000B) [ 0.000000] ACPI: FACS 27FF8000, 0040 [ 0.000000] ACPI: APIC 27FE2EA2, 0068 (r1 D845HV HV84510A 20030525 MSFT 1011) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:2 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 28000000:d6c00000) [ 0.000000] Built 1 zonelists. Total pages: 162497 [ 0.000000] Kernel command line: root=UUID=d58df08d-310e-4a48-a149-d7dc13062e9d ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2392.385 MHz processor. [ 13.990051] Console: colour VGA+ 80x25 [ 13.991398] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 13.992722] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 14.014519] Memory: 637436k/655104k available (2015k kernel code, 17136k reserved, 916k data, 364k init, 0k highmem) [ 14.014532] virtual kernel memory layout: [ 14.014534] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 14.014536] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 14.014538] vmalloc : 0xe8800000 - 0xff7fe000 ( 367 MB) [ 14.014539] lowmem : 0xc0000000 - 0xe7fc0000 ( 639 MB) [ 14.014540] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 14.014541] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 14.014542] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 14.014546] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 14.014600] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 14.094623] Calibrating delay using timer specific routine.. 4788.92 BogoMIPS (lpj=9577856) [ 14.094663] Security Framework v1.0.0 initialized [ 14.094674] SELinux: Disabled at boot. [ 14.094689] Mount-cache hash table entries: 512 [ 14.094890] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [ 14.094906] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 14.094910] CPU: L2 cache: 512K [ 14.094913] CPU: Hyper-Threading is disabled [ 14.094916] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 [ 14.094935] Compat vDSO mapped to ffffe000. [ 14.094954] Checking 'hlt' instruction... OK. [ 14.110775] SMP alternatives: switching to UP code [ 14.111147] Freeing SMP alternatives: 11k freed [ 14.111564] Early unpacking initramfs... done [ 14.470196] ACPI: Core revision 20070126 [ 14.470298] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 14.473028] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 [ 14.473076] Total of 1 processors activated (4788.92 BogoMIPS). [ 14.473232] ENABLING IO-APIC IRQs [ 14.473446] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 14.618672] Brought up 1 CPUs [ 14.618864] Booting paravirtualized kernel on bare hardware [ 14.618956] Time: 10:31:13 Date: 09/24/107 [ 14.618999] NET: Registered protocol family 16 [ 14.619165] EISA bus registered [ 14.619184] ACPI: bus type pci registered [ 14.619425] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 [ 14.619427] PCI: Using configuration type 1 [ 14.619429] Setting up standard PCI resources [ 14.621134] ACPI: EC: Look up EC in DSDT [ 14.625023] ACPI: Interpreter enabled [ 14.625029] ACPI: (supports S0 S1 S4 S5) [ 14.625053] ACPI: Using IOAPIC for interrupt routing [ 14.630675] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.630699] PCI: Probing PCI hardware (bus 00) [ 14.630968] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 14.630973] PCI quirk: region 0500-053f claimed by ICH4 GPIO [ 14.631640] PCI: Transparent bridge - 0000:00:1e.0 [ 14.631673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.631776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 14.633229] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 14.633333] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 14.633436] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 14.633540] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 14.633642] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 14.633746] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 14.633849] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 14.633951] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 14.634081] ACPI: Power Resource [FDDP] (off) [ 14.634114] ACPI: Power Resource [URP1] (off) [ 14.634147] ACPI: Power Resource [URP2] (off) [ 14.634180] ACPI: Power Resource [LPTP] (off) [ 14.634194] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.634209] pnp: PnP ACPI init [ 14.634230] ACPI: bus type pnp registered [ 14.637279] pnp: PnP ACPI: found 13 devices [ 14.637283] ACPI: ACPI bus type pnp unregistered [ 14.637289] PnPBIOS: Disabled by ACPI PNP [ 14.637376] PCI: Using ACPI for IRQ routing [ 14.637380] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.641441] NET: Registered protocol family 8 [ 14.641444] NET: Registered protocol family 20 [ 14.641560] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 14.641564] pnp: 00:0c: iomem range 0xe8000-0xfffff could not be reserved [ 14.641567] pnp: 00:0c: iomem range 0x100000-0x27ffffff could not be reserved [ 14.641571] pnp: 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 14.642616] Time: tsc clocksource has been installed. [ 14.672008] PCI: Bridge: 0000:00:01.0 [ 14.672010] IO window: disabled. [ 14.672015] MEM window: fc900000-fe9fffff [ 14.672020] PREFETCH window: cc600000-dc6fffff [ 14.672027] PCI: Bridge: 0000:00:1e.0 [ 14.672030] IO window: d000-dfff [ 14.672036] MEM window: fea00000-feafffff [ 14.672041] PREFETCH window: dc700000-dc7fffff [ 14.672063] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 14.672079] NET: Registered protocol family 2 [ 14.710709] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.711044] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 14.714774] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.716157] TCP: Hash tables configured (established 131072 bind 65536) [ 14.716170] TCP reno registered [ 14.726939] checking if image is initramfs... it is [ 15.174597] Switched to high resolution mode on CPU 0 [ 15.432723] Freeing initrd memory: 7342k freed [ 15.433376] audit: initializing netlink socket (disabled) [ 15.433407] audit(1193221873.024:1): initialized [ 15.436514] VFS: Disk quotas dquot_6.5.1 [ 15.436592] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 15.436748] io scheduler noop registered [ 15.436751] io scheduler anticipatory registered [ 15.436754] io scheduler deadline registered [ 15.436774] io scheduler cfq registered (default) [ 15.436839] Boot video device is 0000:01:00.0 [ 15.437087] isapnp: Scanning for PnP cards... [ 15.792529] isapnp: No Plug & Play device found [ 15.830707] Real Time Clock Driver v1.12ac [ 15.830849] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.830964] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 15.831280] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 15.832241] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 15.832673] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 15.833728] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.834077] input: Macintosh mouse button emulation as /class/input/input0 [ 15.834202] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 15.838184] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.838197] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.838500] mice: PS/2 mouse device common for all mice [ 15.838669] EISA: Probing bus 0 at eisa.0 [ 15.838712] EISA: Detected 0 cards. [ 15.838879] TCP cubic registered [ 15.838893] NET: Registered protocol family 1 [ 15.838928] Using IPI No-Shortcut mode [ 15.839161] Magic number: 11:365:528 [ 15.840312] Freeing unused kernel memory: 364k freed [ 15.878610] input: AT Translated Set 2 keyboard as /class/input/input1 [ 17.104603] AppArmor: AppArmor initialized<5>audit(1193221874.524:2): type=1505 info="AppArmor initialized" pid=1174 [ 17.116296] fuse init (API version 7.8) [ 17.123037] Failure registering capabilities with primary security module. [ 17.141203] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 17.992800] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 17.992884] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 17.998337] eth0: VIA Rhine III at 0x1d800, 00:50:fc:c1:00:c0, IRQ 16. [ 17.999062] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 18.034955] SCSI subsystem initialized [ 18.042016] libata version 2.21 loaded. [ 18.047253] ata_piix 0000:00:1f.1: version 2.11 [ 18.047366] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 18.047502] scsi0 : ata_piix [ 18.047581] scsi1 : ata_piix [ 18.047720] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 18.047724] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 18.055734] usbcore: registered new interface driver usbfs [ 18.055775] usbcore: registered new interface driver hub [ 18.055808] usbcore: registered new device driver usb [ 18.086719] USB Universal Host Controller Interface driver v3.0 [ 18.174298] Floppy drive(s): fd0 is 1.44M [ 18.219553] ata1.00: ATA-5: WDC WD400EB-00CPF0, 06.04G06, max UDMA/100 [ 18.219560] ata1.00: 78165360 sectors, multi 16: LBA [ 18.219667] ata1.01: ATA-6: SAMSUNG SP2001H, QT100-60, max UDMA/100 [ 18.219670] ata1.01: 39179952 sectors, multi 16: LBA [ 18.235607] ata1.00: configured for UDMA/100 [ 18.240326] FDC 0 is a post-1991 82077 [ 18.242817] ata1.01: configured for UDMA/100 [ 18.570541] ata2.00: ATA-6: ST340015A, 3.01, max UDMA/100 [ 18.570548] ata2.00: 78165360 sectors, multi 16: LBA [ 18.570555] ata2.01: ATAPI: LG DVD-ROM DRD-8160B, 1.01, max UDMA/33 [ 18.570561] ata2.00: limited to UDMA/33 due to 40-wire cable [ 18.586524] ata2.00: configured for UDMA/33 [ 18.758378] ata2.01: configured for UDMA/33 [ 18.758592] scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-00CP 06.0 PQ: 0 ANSI: 5 [ 18.759197] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP2001H QT10 PQ: 0 ANSI: 5 [ 18.759631] scsi 1:0:0:0: Direct-Access ATA ST340015A 3.01 PQ: 0 ANSI: 5 [ 18.760520] scsi 1:0:1:0: CD-ROM LG DVD-ROM DRD8160B 1.01 PQ: 0 ANSI: 5 [ 18.761141] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 17 [ 18.761162] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 18.761168] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 18.761476] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 18.761514] uhci_hcd 0000:00:1f.2: irq 17, io base 0x0000ef40 [ 18.761709] usb usb1: configuration #1 chosen from 1 choice [ 18.761743] hub 1-0:1.0: USB hub found [ 18.761756] hub 1-0:1.0: 2 ports detected [ 18.784175] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 18.784223] sd 0:0:0:0: [sda] Write Protect is off [ 18.784226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.784250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.784350] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 18.784363] sd 0:0:0:0: [sda] Write Protect is off [ 18.784366] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.784386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.784393] sda: sda1 sda2 < sda5 sda6 > [ 18.838943] sd 0:0:0:0: [sda] Attached SCSI disk [ 18.839196] sd 0:0:1:0: [sdb] 39179952 512-byte hardware sectors (20060 MB) [ 18.839215] sd 0:0:1:0: [sdb] Write Protect is off [ 18.839218] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 18.839240] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.839315] sd 0:0:1:0: [sdb] 39179952 512-byte hardware sectors (20060 MB) [ 18.839327] sd 0:0:1:0: [sdb] Write Protect is off [ 18.839330] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 18.839350] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.839355] sdb: sdb1 [ 18.846166] sd 0:0:1:0: [sdb] Attached SCSI disk [ 18.846409] sd 1:0:0:0: [sdc] 78165360 512-byte hardware sectors (40021 MB) [ 18.846424] sd 1:0:0:0: [sdc] Write Protect is off [ 18.846428] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 18.846449] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.846514] sd 1:0:0:0: [sdc] 78165360 512-byte hardware sectors (40021 MB) [ 18.846526] sd 1:0:0:0: [sdc] Write Protect is off [ 18.846529] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 18.846549] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.846553] sdc:<6>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 18 [ 18.862384] PCI: Setting latency timer of device 0000:00:1f.4 to 64 [ 18.862390] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 18.862422] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 18.862457] uhci_hcd 0000:00:1f.4: irq 18, io base 0x0000ef80 [ 18.862592] usb usb2: configuration #1 chosen from 1 choice [ 18.862624] hub 2-0:1.0: USB hub found [ 18.862637] hub 2-0:1.0: 2 ports detected [ 18.863749] sdc2 < sdc5 sdc6 > sdc3 [ 18.892011] sd 1:0:0:0: [sdc] Attached SCSI disk [ 18.898553] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.898759] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 18.898952] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 18.899151] scsi 1:0:1:0: Attached scsi generic sg3 type 5 [ 18.939506] sr0: scsi3-mmc drive: 16x/48x cd/rw xa/form2 cdda tray [ 18.939516] Uniform CD-ROM driver Revision: 3.20 [ 18.939994] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 19.102196] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 19.268575] usb 1-1: configuration #1 chosen from 1 choice [ 19.422727] Attempting manual resume [ 19.422733] swsusp: Resume From Partition 8:35 [ 19.422735] PM: Checking swsusp image. [ 19.423077] PM: Resume from disk failed. [ 19.478367] kjournald starting. Commit interval 5 seconds [ 19.478390] EXT3-fs: mounted filesystem with ordered data mode. [ 19.510087] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 19.664434] usb 2-2: configuration #1 chosen from 1 choice [ 19.667321] hub 2-2:1.0: USB hub found [ 19.670274] hub 2-2:1.0: 4 ports detected [ 19.782267] usbcore: registered new interface driver hiddev [ 19.795665] input: USB Mouse as /class/input/input2 [ 19.795694] input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1f.2-1 [ 19.795713] usbcore: registered new interface driver usbhid [ 19.795717] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 29.811866] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.829975] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.978729] Linux agpgart interface v0.102 (c) Dave Jones [ 30.002143] agpgart: Detected an Intel 845G Chipset. [ 30.016474] agpgart: AGP aperture is 256M @ 0xe0000000 [ 30.027895] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or [ 30.027899] don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if [ 30.027901] you are certain that your <4>intel_rng: system has a functional [ 30.027902] RNG, try<4>intel_rng: using the 'no_fwh_detect' option. [ 30.071682] iTCO_vendor_support: vendor-support=0 [ 30.073602] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 30.073698] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 30.073708] iTCO_wdt: No card detected [ 31.207808] gameport: EMU10K1 is pci0000:02:0b.1/gameport0, io 0xdff0, speed 978kHz [ 31.214351] input: PC Speaker as /class/input/input3 [ 31.316326] nvidia: module license 'NVIDIA' taints kernel. [ 31.651860] parport_pc 00:0a: reported by Plug and Play ACPI [ 31.651891] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 31.683612] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 31.684258] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007 [ 31.736842] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 16 [ 31.736866] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 32.408587] intel8x0_measure_ac97_clock: measured 54827 usecs [ 32.408592] intel8x0: clocking to 48000 [ 32.410473] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 33.279712] lp0: using parport0 (interrupt-driven). [ 33.352295] Adding 787176k swap on /dev/sdc3. Priority:-1 extents:1 across:787176k [ 36.539384] EXT3 FS on sdc6, internal journal [ 45.975271] input: Power Button (FF) as /class/input/input4 [ 45.981787] ACPI: Power Button (FF) [PWRF] [ 46.026175] input: Power Button (CM) as /class/input/input5 [ 46.032709] ACPI: Power Button (CM) [PBTN] [ 46.084025] No dock devices found. [ 47.979622] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 48.142063] ppdev: user-space parallel port driver [ 48.363837] audit(1193221906.986:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4766 profile="/usr/sbin/cupsd" [ 48.412971] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 48.412979] apm: overridden by ACPI. [ 48.916115] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 49.031717] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 49.062222] NFSD: starting 90-second grace period [ 50.441451] Failure registering capabilities with primary security module. [ 52.662758] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 52.662937] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 52.663067] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 52.918388] NET: Registered protocol family 10 [ 52.918655] lo: Disabled Privacy Extensions [ 55.970702] NET: Registered protocol family 17 [ 64.028125] UDF-fs: No VRS found [ 64.183911] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 64.217116] ISO 9660 Extensions: RRIP_1991A [ 70.623832] eth0: no IPv6 routers present [ 110.759532] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 110.759561] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 110.759584] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 152.601467] UDF-fs: No VRS found [ 152.627448] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 152.668569] ISO 9660 Extensions: RRIP_1991A [ 8006.889480] end_request: I/O error, dev sr0, sector 1417852 [ 8006.889493] Buffer I/O error on device sr0, logical block 354463 [17035.431405] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [17035.431587] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [17035.431716] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [17055.711440] UDF-fs: No VRS found [17056.022407] ISO 9660 Extensions: Microsoft Joliet Level 3 [17056.134071] ISO 9660 Extensions: RRIP_1991A