Linux knarzkiste 2.6.20-9-lowlatency #2 SMP PREEMPT Sun Feb 25 23:03:30 UTC 2007 x86_64 GNU/Linux [ 0.000000] Linux version 2.6.20-9-lowlatency (root@crested) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu3)) #2 SMP PREEMPT Sun Feb 25 23:03:30 UTC 2007 (Ubuntu 2.6.20-9.16-generic) [ 0.000000] Command line: root=UUID=a17deb61-9c7d-4d6a-99cc-922303124b37 ro vga=0x317 panic=15 pci=assign-busses [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017f40000 (usable) [ 0.000000] BIOS-e820: 0000000017f40000 - 0000000017f50000 (ACPI data) [ 0.000000] BIOS-e820: 0000000017f50000 - 0000000018000000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000018000000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 98112) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 MSI ) @ 0x00000000000f8360 [ 0.000000] ACPI: RSDT (v001 MSI 1013 0x09262005 MSFT 0x00000097) @ 0x0000000017f40000 [ 0.000000] ACPI: FADT (v002 MSI 1013 0x09262005 MSFT 0x00000097) @ 0x0000000017f40200 [ 0.000000] ACPI: MADT (v001 MSI OEMAPIC 0x09262005 MSFT 0x00000097) @ 0x0000000017f40300 [ 0.000000] ACPI: WDRT (v001 MSI MSI_OEM 0x09262005 MSFT 0x00000097) @ 0x0000000017f40360 [ 0.000000] ACPI: MCFG (v001 MSI OEMMCFG 0x09262005 MSFT 0x00000097) @ 0x0000000017f403b0 [ 0.000000] ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x0000000017f435e0 [ 0.000000] ACPI: OEMB (v001 MSI MSI_OEM 0x09262005 MSFT 0x00000097) @ 0x0000000017f50040 [ 0.000000] ACPI: DSDT (v001 MSI 1013 0x09262005 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000017f40000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 98112) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000017f40000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 98112 [ 0.000000] On node 0 totalpages: 98015 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1081 pages reserved [ 0.000000] DMA zone: 2862 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1285 pages used for memmap [ 0.000000] DMA32 zone: 92731 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 95593 [ 0.000000] Kernel command line: root=UUID=a17deb61-9c7d-4d6a-99cc-922303124b37 ro vga=0x317 panic=15 pci=assign-busses [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 8.590303] Console: colour dummy device 80x25 [ 8.591035] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 8.591490] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 8.591559] Checking aperture... [ 8.591565] CPU 0: aperture @ 1802000000 size 32 MB [ 8.591568] Aperture too small (32 MB) [ 8.603902] No AGP bridge found [ 8.610476] Memory: 373912k/392448k available (2231k kernel code, 18148k reserved, 1141k data, 300k init) [ 8.670193] Calibrating delay using timer specific routine.. 3185.79 BogoMIPS (lpj=1592898) [ 8.670278] Security Framework v1.0.0 initialized [ 8.670287] SELinux: Disabled at boot. [ 8.670322] Mount-cache hash table entries: 256 [ 8.670532] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 8.670537] CPU: L2 Cache: 1024K (64 bytes/line) [ 8.670542] CPU 0/0 -> Node 0 [ 8.670567] SMP alternatives: switching to UP code [ 8.670850] Freeing SMP alternatives: 24k freed [ 8.670870] ACPI: Core revision 20060707 [ 8.684175] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 8.694187] Using local APIC timer interrupts. [ 8.756984] result 12436936 [ 8.756987] Detected 12.436 MHz APIC timer. [ 8.757204] Brought up 1 CPUs [ 8.757249] testing NMI watchdog ... OK. [ 8.767258] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 8.767262] time.c: Detected 1591.926 MHz processor. [ 8.767628] NET: Registered protocol family 16 [ 8.767750] ACPI: bus type pci registered [ 8.767762] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 8.767766] PCI: Not using MMCONFIG. [ 8.767769] PCI: Using configuration type 1 [ 8.772366] ACPI: Interpreter enabled [ 8.772371] ACPI: Using IOAPIC for interrupt routing [ 8.772727] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 8.772735] PCI: Probing PCI hardware (bus 00) [ 8.773794] Boot video device is 0000:01:05.0 [ 8.774281] PCI: Transparent bridge - 0000:00:14.4 [ 8.774446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 8.782278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 8.790750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP2._PRT] [ 8.792926] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 10 11 12 14 15) *0, disabled. [ 8.793155] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *10 11 12 14 15) [ 8.793373] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6 7 10 11 12 14 15) [ 8.793592] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11 12 14 15) [ 8.793813] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *6 7 10 11 12 14 15) [ 8.794039] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *7 10 11 12 14 15) [ 8.794274] ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 7 10 11 12 14 15) [ 8.794493] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) *0, disabled. [ 8.794609] Linux Plug and Play Support v0.97 (c) Adam Belay [ 8.794625] pnp: PnP ACPI init [ 8.797815] pnp: PnP ACPI: found 11 devices [ 8.797873] PCI: Using ACPI for IRQ routing [ 8.797878] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 8.798891] PCI: Bridge: 0000:00:01.0 [ 8.798896] IO window: d000-dfff [ 8.798901] MEM window: fbe00000-fbefffff [ 8.798906] PREFETCH window: d0000000-dfffffff [ 8.798926] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 8.798930] IO window: 0000e000-0000e0ff [ 8.798937] IO window: 0000e400-0000e4ff [ 8.798945] PREFETCH window: 30000000-33ffffff [ 8.798952] MEM window: 3c000000-3fffffff [ 8.798959] PCI: Bus 7, cardbus bridge: 0000:02:04.1 [ 8.798963] IO window: 0000ec00-0000ecff [ 8.798970] IO window: 00001000-000010ff [ 8.798977] PREFETCH window: 34000000-37ffffff [ 8.798985] MEM window: 40000000-43ffffff [ 8.798991] PCI: Bridge: 0000:00:14.4 [ 8.798996] IO window: e000-efff [ 8.799004] MEM window: fbf00000-fbffffff [ 8.799011] PREFETCH window: 30000000-39ffffff [ 8.799054] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 8.799079] ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 8.799200] NET: Registered protocol family 2 [ 8.808223] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 8.808363] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 8.808702] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 8.808879] TCP: Hash tables configured (established 16384 bind 8192) [ 8.808884] TCP reno registered [ 8.811269] checking if image is initramfs... it is [ 9.635633] Freeing initrd memory: 7583k freed [ 9.645015] audit: initializing netlink socket (disabled) [ 9.645038] audit(1174213309.983:1): initialized [ 9.645234] VFS: Disk quotas dquot_6.5.1 [ 9.645256] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 9.645320] io scheduler noop registered [ 9.645324] io scheduler anticipatory registered [ 9.645328] io scheduler deadline registered [ 9.645346] io scheduler cfq registered (default) [ 9.672586] Real Time Clock Driver v1.12ac [ 9.672645] Linux agpgart interface v0.101 (c) Dave Jones [ 9.672651] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 9.673253] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 9.673267] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 9.673353] mice: PS/2 mouse device common for all mice [ 9.673978] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 9.674159] input: Macintosh mouse button emulation as /class/input/input0 [ 9.674198] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 9.674205] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 9.674511] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 9.674767] i8042.c: Detected active multiplexing controller, rev 1.1. [ 9.674851] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 9.674911] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 9.674919] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 9.674924] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 9.674928] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 9.675065] TCP cubic registered [ 9.675079] NET: Registered protocol family 1 [ 9.675086] NET: Registered protocol family 8 [ 9.675089] NET: Registered protocol family 20 [ 9.675205] ACPI: (supports S0 S1 S3 S4 S5) [ 9.675265] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 9.675428] Freeing unused kernel memory: 300k freed [ 9.678013] input: AT Translated Set 2 keyboard as /class/input/input1 [ 9.768562] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 3072k, total 131072k [ 9.768576] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 9.768580] vesafb: scrolling: redraw [ 9.768584] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 9.827012] Console: switching to colour frame buffer device 128x48 [ 9.885945] fb0: VESA VGA frame buffer device [ 10.032529] Capability LSM initialized [ 10.072867] ACPI: duty_cycle spans bit 4 [ 10.073328] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 10.078540] ACPI: Thermal Zone [THRM] (60 C) [ 10.650069] usbcore: registered new interface driver usbfs [ 10.650705] usbcore: registered new interface driver hub [ 10.651316] usbcore: registered new device driver usb [ 10.652687] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.652729] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 10.653584] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 10.654341] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 10.655177] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfbdfd000 [ 10.741863] usb usb1: configuration #1 chosen from 1 choice [ 10.742520] hub 1-0:1.0: USB hub found [ 10.742943] hub 1-0:1.0: 4 ports detected [ 10.826442] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 10.854094] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 10.866093] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 10.878444] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 10.891444] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfbdfe000 [ 10.959026] usb usb2: configuration #1 chosen from 1 choice [ 10.972757] hub 2-0:1.0: USB hub found [ 10.986668] hub 2-0:1.0: 4 ports detected [ 11.101463] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 11.116653] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 11.132192] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 11.148413] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbdff000 [ 11.164839] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 11.182618] usb usb3: configuration #1 chosen from 1 choice [ 11.200115] hub 3-0:1.0: USB hub found [ 11.217827] hub 3-0:1.0: 8 ports detected [ 11.336746] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 11.355360] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.374800] ATIIXP: chipset revision 0 [ 11.394399] ATIIXP: not 100% native mode: will probe irqs later [ 11.414607] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio [ 11.435645] Losing some ticks... checking if CPU frequency changed. [ 11.435661] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio [ 11.456801] Probing IDE interface ide0... [ 11.720843] hda: WDC WD600VE-00HDT0, ATA DISK drive [ 11.843339] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 12.050502] usb 2-1: configuration #1 chosen from 1 choice [ 12.378183] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 12.399930] Probing IDE interface ide1... [ 13.071053] hdc: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive [ 13.398795] ide1 at 0x170-0x177,0x376 on irq 15 [ 13.431354] SCSI subsystem initialized [ 13.459627] libata version 2.00 loaded. [ 13.462076] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 13.484635] 8139cp 0000:02:03.0: Try the "8139too" driver instead. [ 13.509410] 8139too Fast Ethernet driver 0.9.28 [ 13.532140] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 13.556339] eth0: RealTek RTL8139 at 0xffffc2000001ec00, 00:10:dc:e8:c8:4f, IRQ 18 [ 13.579573] eth0: Identified 8139 chip type 'RTL-8101' [ 13.592675] hda: max request size: 128KiB [ 13.615993] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 13.659252] hda: cache flushes supported [ 13.683305] hda: hda1 hda2 <<6>usbcore: registered new interface driver hiddev [ 13.743594] hda5 > [ 13.770150] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 13.795656] Uniform CD-ROM driver Revision: 3.20 [ 13.844384] input: Logitech USB Optical Mouse as /class/input/input2 [ 13.869767] input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1 [ 13.895444] usbcore: registered new interface driver usbhid [ 13.932367] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 14.290690] Attempting manual resume [ 14.396815] kjournald starting. Commit interval 5 seconds [ 14.423456] EXT3-fs: mounted filesystem with ordered data mode. [ 29.579719] hda: cache flushes supported [ 31.261898] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 31.905664] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.936438] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.982885] Yenta: CardBus bridge found at 0000:02:04.0 [1462:0131] [ 32.066114] input: PC Speaker as /class/input/input3 [ 32.341409] Yenta: ISA IRQ mask 0x0cb8, PCI irq 19 [ 32.369535] Socket status: 30000006 [ 32.397151] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff [ 32.424881] pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff [ 32.452418] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff [ 32.479665] Yenta: CardBus bridge found at 0000:02:04.1 [1462:0131] [ 32.631230] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x116eb1, caps: 0xa04713/0x0 [ 32.659495] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 [ 32.686410] Socket status: 30000006 [ 32.713281] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff [ 32.739910] pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff [ 32.766352] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff [ 32.814224] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 32.846008] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 33.386184] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 33.411992] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com [ 33.438075] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 33.542953] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel [ 33.542963] rt2500 EEPROM: 4 4 4 4 4 5 6 6 6 6 6 6 6 6 dBm Maximum [ 34.209783] NET: Registered protocol family 17 [ 34.814939] Linux video capture interface: v2.00 [ 34.892705] saa7130/34: v4l2 driver version 0.2.14 loaded [ 34.934680] saa7134 ALSA driver for DMA sound loaded [ 34.959219] saa7134 ALSA: no saa7134 cards found [ 35.054006] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-30 processors (version 2.00.00) [ 35.079994] ACPI: Invalid package argument [ 35.105658] ACPI Exception (acpi_processor-0270): AE_BAD_PARAMETER, Invalid _PSS data [20060707] [ 35.140219] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x12 [ 35.167069] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x4 [ 35.193844] powernow-k8: ph2 null fid transition 0x8 [ 35.250934] Bluetooth: Core ver 2.11 [ 35.277822] NET: Registered protocol family 31 [ 35.304862] Bluetooth: HCI device and connection manager initialized [ 35.332040] Bluetooth: HCI socket layer initialized [ 35.371958] Bluetooth: HCI USB driver ver 2.9 [ 35.398852] usbcore: registered new interface driver hci_usb [ 35.445216] fuse init (API version 7.8) [ 35.534489] Adding 1309256k swap on /dev/disk/by-uuid/41cebaba-a2c3-48f7-a72a-cc9409627478. Priority:-1 extents:1 across:1309256k [ 35.742215] EXT3 FS on hda1, internal journal [ 35.973831] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 37.385604] Adding 1309256k swap on /dev/disk/by-uuid/41cebaba-a2c3-48f7-a72a-cc9409627478. Priority:-2 extents:1 across:1309256k [ 40.941597] ACPI: AC Adapter [ADP1] (on-line) [ 40.991865] ACPI: Battery Slot [BAT1] (battery present) [ 41.061710] input: Power Button (FF) as /class/input/input5 [ 41.085384] ACPI: Power Button (FF) [PWRF] [ 41.130319] input: Lid Switch as /class/input/input6 [ 41.130610] ACPI: Lid Switch [LID0] [ 41.149302] input: Sleep Button (CM) as /class/input/input7 [ 41.149585] ACPI: Sleep Button (CM) [SLPB] [ 41.159293] input: Power Button (CM) as /class/input/input8 [ 41.159602] ACPI: Power Button (CM) [PWRB] [ 41.220231] Using specific hotkey driver [ 41.352114] No dock devices found. [ 41.393506] ibm_acpi: ec object not found [ 41.512444] pcc_acpi: loading... [ 48.628290] eth0: link down [ 51.730107] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 51.737375] [fglrx] Maximum main memory to use for locked dma buffers: 310 MBytes. [ 51.737707] [fglrx] module loaded - fglrx 8.33.6 [Jan 8 2007] on minor 0 [ 51.854848] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 55.096117] [fglrx:firegl_unlock] *ERROR* Process 5136 using kernel context 0 [ 55.321169] lp: driver loaded but no devices found [ 55.396477] ppdev: user-space parallel port driver [ 70.983102] NET: Registered protocol family 10 [ 70.983234] lo: Disabled Privacy Extensions [ 70.983308] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 79.586925] Bluetooth: L2CAP ver 2.8 [ 79.586931] Bluetooth: L2CAP socket layer initialized [ 79.630595] Bluetooth: RFCOMM socket layer initialized [ 79.630615] Bluetooth: RFCOMM TTY layer initialized [ 79.630617] Bluetooth: RFCOMM ver 1.8 [ 81.200900] ra0: no IPv6 routers present [ 109.942319] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel [ 109.942791] rt2500 EEPROM: 4 4 4 4 4 5 6 6 6 6 6 6 6 6 dBm Maximum [ 115.075650] ra0: no IPv6 routers present [ 142.395680] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel [ 142.396013] rt2500 EEPROM: 4 4 4 4 4 5 6 6 6 6 6 6 6 6 dBm Maximum [ 147.479313] ra0: no IPv6 routers present [ 175.139388] APIC error on CPU0: 00(40) [ 222.562748] APIC error on CPU0: 40(40) [ 377.879502] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel [ 377.879820] rt2500 EEPROM: 4 4 4 4 4 5 6 6 6 6 6 6 6 6 dBm Maximum [ 383.101358] ra0: no IPv6 routers present [ 392.731196] APIC error on CPU0: 40(40) [ 519.646471] APIC error on CPU0: 40(40) [ 536.634460] APIC error on CPU0: 40(40) 00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 10) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.1 IDE interface [0101]: ATI Technologies Inc Standard Dual Channel PCI IDE Controller [1002:4376] (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 01) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- 00:14.6 Modem [0703]: ATI Technologies Inc SB400 AC'97 Modem Controller [1002:4378] (rev 01) (prog-if 00 [Generic]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 02:04.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 02:04.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 04) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 02:09.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI [1814:0201] (rev 01) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:6833] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR-