[ 0.000000] Linux version 2.6.20-11-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Mar 15 03:43:56 UTC 2007 (Ubuntu 2.6.20-11.18-generic) [ 0.000000] Command line: root=UUID=d59009d3-ebf4-44bc-ad45-0d52a673aed5 ro quiet splash vga=791 elevator=cfq [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) [ 0.000000] BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved) [ 0.000000] BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fb520 [ 0.000000] ACPI: XSDT (v001 A M I OEMXSDT 0x07000613 MSFT 0x00000097) @ 0x000000003ffb0100 [ 0.000000] ACPI: FADT (v003 A M I OEMFACP 0x07000613 MSFT 0x00000097) @ 0x000000003ffb0290 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000613 MSFT 0x00000097) @ 0x000000003ffb0390 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x07000613 MSFT 0x00000097) @ 0x000000003ffb0400 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x07000613 MSFT 0x00000097) @ 0x000000003ffbe040 [ 0.000000] ACPI: DSDT (v001 A0371 A0371001 0x00000001 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ffb0000 [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003ffb0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 155 [ 0.000000] 0: 256 -> 262064 [ 0.000000] On node 0 totalpages: 261963 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1075 pages reserved [ 0.000000] DMA zone: 2864 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3526 pages used for memmap [ 0.000000] DMA32 zone: 254442 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009b000 - 000000000009c000 [ 0.000000] Nosave address range: 000000000009c000 - 00000000000ea000 [ 0.000000] Nosave address range: 00000000000ea000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257306 [ 0.000000] Kernel command line: root=UUID=d59009d3-ebf4-44bc-ad45-0d52a673aed5 ro quiet splash vga=791 elevator=cfq [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 22.925009] Console: colour dummy device 80x25 [ 22.925900] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.927305] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 22.927411] Checking aperture... [ 22.927414] CPU 0: aperture @ 6030000000 size 32 MB [ 22.927416] Aperture too small (32 MB) [ 22.933347] No AGP bridge found [ 22.946647] Memory: 1020764k/1048256k available (2204k kernel code, 27088k reserved, 1143k data, 304k init) [ 23.022843] Calibrating delay using timer specific routine.. 4020.92 BogoMIPS (lpj=8041854) [ 23.022907] Security Framework v1.0.0 initialized [ 23.022915] SELinux: Disabled at boot. [ 23.022941] Mount-cache hash table entries: 256 [ 23.023104] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 23.023106] CPU: L2 Cache: 512K (64 bytes/line) [ 23.023109] CPU 0/0 -> Node 0 [ 23.023111] CPU: Physical Processor ID: 0 [ 23.023113] CPU: Processor Core ID: 0 [ 23.023134] SMP alternatives: switching to UP code [ 23.023506] Early unpacking initramfs... done [ 23.319756] ACPI: Core revision 20060707 [ 23.320274] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 23.363785] Using local APIC timer interrupts. [ 23.413495] result 12557305 [ 23.413497] Detected 12.557 MHz APIC timer. [ 23.414589] SMP alternatives: switching to SMP code [ 23.414782] Booting processor 1/2 APIC 0x1 [ 23.424789] Initializing CPU#1 [ 23.505683] Calibrating delay using timer specific routine.. 4018.56 BogoMIPS (lpj=8037136) [ 23.505690] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 23.505692] CPU: L2 Cache: 512K (64 bytes/line) [ 23.505694] CPU 1/1 -> Node 0 [ 23.505696] CPU: Physical Processor ID: 0 [ 23.505698] CPU: Processor Core ID: 1 [ 23.505779] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 23.509683] CPU 1: Syncing TSC to CPU 0. [ 23.510329] CPU 1: synchronized TSC with CPU 0 (last diff -76 cycles, maxerr 544 cycles) [ 23.510341] Brought up 2 CPUs [ 23.510394] testing NMI watchdog ... OK. [ 23.550375] Disabling vsyscall due to use of PM timer [ 23.550378] time.c: Using 3.579545 MHz WALL PM GTOD PM timer. [ 23.550381] time.c: Detected 2009.166 MHz processor. [ 24.966451] migration_cost=262 [ 24.966822] Time: 12:47:14 Date: 02/16/107 [ 24.966864] NET: Registered protocol family 16 [ 24.966951] ACPI: bus type pci registered [ 24.966958] PCI: Using configuration type 1 [ 24.974491] ACPI: Interpreter enabled [ 24.974495] ACPI: Using IOAPIC for interrupt routing [ 24.975115] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 24.975120] PCI: Probing PCI hardware (bus 00) [ 24.976058] Boot video device is 0000:03:00.0 [ 24.976145] PCI: Transparent bridge - 0000:00:12.0 [ 24.976309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 24.999462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT] [ 25.000060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT] [ 25.000397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT] [ 25.000723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 25.001047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT] [ 25.001371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 25.002743] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 [ 25.003192] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 25.003632] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 25.004071] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 25.004516] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7 [ 25.004954] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 25.005392] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7 [ 25.005836] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *7 [ 25.006274] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 25.006713] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *7 [ 25.007153] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 25.007599] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11 [ 25.008126] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 25.008231] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.008248] pnp: PnP ACPI init [ 25.015240] pnp: PnP ACPI: found 13 devices [ 25.015303] PCI: Using ACPI for IRQ routing [ 25.015306] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.015408] NET: Registered protocol family 8 [ 25.015410] NET: Registered protocol family 20 [ 25.016992] pnp: 00:0a: ioport range 0xc00-0xc0f has been reserved [ 25.016995] pnp: 00:0a: ioport range 0xd00-0xd0f has been reserved [ 25.016997] pnp: 00:0a: ioport range 0xa20-0xa2f has been reserved [ 25.017000] pnp: 00:0a: ioport range 0xa30-0xa3f has been reserved [ 25.017322] PCI: Bridge: 0000:00:02.0 [ 25.017324] IO window: disabled. [ 25.017326] MEM window: disabled. [ 25.017328] PREFETCH window: disabled. [ 25.017331] PCI: Bridge: 0000:00:03.0 [ 25.017333] IO window: e000-efff [ 25.017336] MEM window: dde00000-ddefffff [ 25.017338] PREFETCH window: disabled. [ 25.017340] PCI: Bridge: 0000:00:04.0 [ 25.017342] IO window: disabled. [ 25.017344] MEM window: ddf00000-dfffffff [ 25.017347] PREFETCH window: c0000000-cfffffff [ 25.017350] PCI: Bridge: 0000:00:12.0 [ 25.017351] IO window: disabled. [ 25.017354] MEM window: disabled. [ 25.017356] PREFETCH window: disabled. [ 25.017359] PCI: Bridge: 0000:00:16.0 [ 25.017360] IO window: disabled. [ 25.017362] MEM window: disabled. [ 25.017364] PREFETCH window: disabled. [ 25.017367] PCI: Bridge: 0000:00:17.0 [ 25.017368] IO window: disabled. [ 25.017370] MEM window: disabled. [ 25.017372] PREFETCH window: disabled. [ 25.017384] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 25.017390] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 25.017396] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 25.017400] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 25.017406] PCI: Setting latency timer of device 0000:00:16.0 to 64 [ 25.017413] PCI: Setting latency timer of device 0000:00:17.0 to 64 [ 25.017502] NET: Registered protocol family 2 [ 25.060293] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 25.060566] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 25.062363] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 25.063284] TCP: Hash tables configured (established 131072 bind 65536) [ 25.063288] TCP reno registered [ 25.076337] checking if image is initramfs... it is [ 25.641850] Freeing initrd memory: 6758k freed [ 25.648697] audit: initializing netlink socket (disabled) [ 25.648713] audit(1174049234.688:1): initialized [ 25.648915] VFS: Disk quotas dquot_6.5.1 [ 25.648938] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 25.648990] io scheduler noop registered [ 25.648992] io scheduler anticipatory registered [ 25.648994] io scheduler deadline registered [ 25.649008] io scheduler cfq registered (default) [ 26.178759] PCI: Found disabled HT MSI Mapping on 0000:00:16.0 [ 26.178764] PCI: Found disabled HT MSI Mapping on 0000:00:00.0 [ 26.178766] PCI: MSI quirk detected. MSI disabled on chipset 0000:00:16.0. [ 26.178773] PCI: Found disabled HT MSI Mapping on 0000:00:17.0 [ 26.178778] PCI: Found disabled HT MSI Mapping on 0000:00:00.0 [ 26.178780] PCI: MSI quirk detected. MSI disabled on chipset 0000:00:17.0. [ 26.178992] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 26.179014] assign_interrupt_mode Found MSI capability [ 26.179018] Allocate Port Service[0000:00:02.0:pcie00] [ 26.179088] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 26.179108] assign_interrupt_mode Found MSI capability [ 26.179110] Allocate Port Service[0000:00:03.0:pcie00] [ 26.179177] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 26.179197] assign_interrupt_mode Found MSI capability [ 26.179199] Allocate Port Service[0000:00:04.0:pcie00] [ 26.179266] PCI: Setting latency timer of device 0000:00:16.0 to 64 [ 26.179288] assign_interrupt_mode Found MSI capability [ 26.179291] Allocate Port Service[0000:00:16.0:pcie00] [ 26.179360] PCI: Setting latency timer of device 0000:00:17.0 to 64 [ 26.179382] assign_interrupt_mode Found MSI capability [ 26.179385] Allocate Port Service[0000:00:17.0:pcie00] [ 26.205849] Real Time Clock Driver v1.12ac [ 26.205898] Linux agpgart interface v0.101 (c) Dave Jones [ 26.205901] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.206480] mice: PS/2 mouse device common for all mice [ 26.207122] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.207286] input: Macintosh mouse button emulation as /class/input/input0 [ 26.207324] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 26.207328] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 26.207569] PNP: No PS/2 controller found. Probing ports directly. [ 26.209800] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.209808] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.209928] TCP cubic registered [ 26.209939] NET: Registered protocol family 1 [ 26.210131] ACPI: (supports S0 S1 S3 S4 S5) [ 26.210179] Magic number: 15:689:784 [ 26.210275] hash matches device ptyq6 [ 26.210306] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 26.210415] Freeing unused kernel memory: 304k freed [ 26.315668] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000080000, using 3072k, total 262144k [ 26.315673] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 26.315676] vesafb: scrolling: redraw [ 26.315679] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 26.324921] Console: switching to colour frame buffer device 128x48 [ 26.333978] fb0: VESA VGA frame buffer device [ 27.423773] Capability LSM initialized [ 27.457533] ACPI: Processor [CPU1] (supports 8 throttling states) [ 27.946400] usbcore: registered new interface driver usbfs [ 27.946424] usbcore: registered new interface driver hub [ 27.946449] usbcore: registered new device driver usb [ 27.947238] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 27.947682] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 27.947692] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 27.947708] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 27.947711] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 27.947866] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 27.947884] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xdddfe000 [ 27.969200] SCSI subsystem initialized [ 27.974238] libata version 2.00 loaded. [ 28.004328] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 28.012428] Floppy drive(s): fd0 is 1.44M [ 28.017934] usb usb1: configuration #1 chosen from 1 choice [ 28.017960] hub 1-0:1.0: USB hub found [ 28.017970] hub 1-0:1.0: 10 ports detected [ 28.044044] FDC 0 is a post-1991 82077 [ 28.124482] sata_nv 0000:00:10.0: version 3.2 [ 28.124948] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 28.124960] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 28.124974] sata_nv 0000:00:10.0: Using ADMA mode [ 28.124993] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 28.125117] ata1: SATA max UDMA/133 cmd 0xFFFFC20000006480 ctl 0xFFFFC200000064A0 bmdma 0xC400 irq 22 [ 28.125174] ata2: SATA max UDMA/133 cmd 0xFFFFC20000006580 ctl 0xFFFFC200000065A0 bmdma 0xC408 irq 22 [ 28.125187] scsi0 : sata_nv [ 28.427808] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 28.595602] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 28.619212] ata1.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48 [ 28.619216] ata1.00: ata1: dev 0 multi count 16 [ 28.633051] usb 1-1: configuration #1 chosen from 1 choice [ 28.647416] ata1.00: configured for UDMA/133 [ 28.647432] scsi1 : sata_nv [ 28.943132] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 29.114920] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.138859] ata2.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48 [ 29.138862] ata2.00: ata2: dev 0 multi count 16 [ 29.159339] usb 1-2: configuration #1 chosen from 1 choice [ 29.166989] ata2.00: configured for UDMA/133 [ 29.167103] scsi 0:0:0:0: Direct-Access ATA WDC WD2500SD-01K 08.0 PQ: 0 ANSI: 5 [ 29.167110] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 29.167210] scsi 1:0:0:0: Direct-Access ATA WDC WD2500SD-01K 08.0 PQ: 0 ANSI: 5 [ 29.167215] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 29.167641] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21 [ 29.167651] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 21 (level, low) -> IRQ 21 [ 29.167662] sata_nv 0000:00:11.0: Using ADMA mode [ 29.167678] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 29.167753] ata3: SATA max UDMA/133 cmd 0xFFFFC2000001C480 ctl 0xFFFFC2000001C4A0 bmdma 0xB800 irq 21 [ 29.167804] ata4: SATA max UDMA/133 cmd 0xFFFFC2000001C580 ctl 0xFFFFC2000001C5A0 bmdma 0xB808 irq 21 [ 29.167818] scsi2 : sata_nv [ 29.482421] ata3: SATA link down (SStatus 0 SControl 300) [ 29.482437] scsi3 : sata_nv [ 29.486420] usb 1-4: new low speed USB device using ohci_hcd and address 4 [ 29.794018] ata4: SATA link down (SStatus 0 SControl 300) [ 29.794778] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 [ 29.794788] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 20 [ 29.794803] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 29.794807] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 29.794856] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 29.794888] ehci_hcd 0000:00:0b.1: debug port 1 [ 29.794892] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 29.794905] ehci_hcd 0000:00:0b.1: irq 20, io mem 0xdddffc00 [ 29.794912] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.795000] usb usb2: configuration #1 chosen from 1 choice [ 29.795024] hub 2-0:1.0: USB hub found [ 29.795030] hub 2-0:1.0: 10 ports detected [ 29.795437] usb 1-4: unable to read config index 0 descriptor/start [ 29.795440] usb 1-4: chopping to 0 config(s) [ 29.801418] usb 1-4: string descriptor 0 read error: -62 [ 29.807406] usb 1-4: string descriptor 0 read error: -62 [ 29.813398] usb 1-4: string descriptor 0 read error: -62 [ 29.813494] usb 1-4: no configuration chosen from 0 choices [ 29.902584] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 29.902593] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 29.902600] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 29.902610] forcedeth: using HIGHDMA [ 29.941839] usbcore: registered new interface driver hiddev [ 29.941863] usb 1-1: USB disconnect, address 2 [ 30.069663] usb 1-2: USB disconnect, address 3 [ 30.197487] usb 1-4: USB disconnect, address 4 [ 30.425426] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:13.0 [ 30.427716] NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0 [ 30.427751] NFORCE-CK804: chipset revision 243 [ 30.427754] NFORCE-CK804: not 100% native mode: will probe irqs later [ 30.427761] NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller [ 30.427774] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio [ 30.427785] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA [ 30.427796] Probing IDE interface ide0... [ 30.441288] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 30.441302] sda: Write Protect is off [ 30.441305] sda: Mode Sense: 00 3a 00 00 [ 30.441321] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.441383] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 30.441392] sda: Write Protect is off [ 30.441393] sda: Mode Sense: 00 3a 00 00 [ 30.441407] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.441413] sda: sda1 sda2 sda3 [ 30.616144] sd 0:0:0:0: Attached scsi disk sda [ 30.616216] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 30.616229] sdb: Write Protect is off [ 30.616231] sdb: Mode Sense: 00 3a 00 00 [ 30.616245] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.616285] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 30.616293] sdb: Write Protect is off [ 30.616295] sdb: Mode Sense: 00 3a 00 00 [ 30.616308] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.616311] sdb: sdb1 [ 30.632101] sd 1:0:0:0: Attached scsi disk sdb [ 30.637458] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 30.637611] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 30.792307] ReiserFS: sda1: found reiserfs format "3.6" with standard journal [ 30.792316] ReiserFS: sda1: using ordered data mode [ 30.806075] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 30.808091] ReiserFS: sda1: checking transaction log (sda1) [ 30.833938] ReiserFS: sda1: Using r5 hash to sort names [ 30.996439] Probing IDE interface ide1... [ 31.120280] usb 2-6: new high speed USB device using ehci_hcd and address 5 [ 31.252454] usb 2-6: configuration #1 chosen from 1 choice [ 31.252514] hub 2-6:1.0: USB hub found [ 31.252619] hub 2-6:1.0: 4 ports detected [ 31.515878] usbcore: registered new interface driver usbhid [ 31.515885] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 31.735550] hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive [ 31.819371] usb 1-1: new low speed USB device using ohci_hcd and address 5 [ 32.024580] usb 1-1: configuration #1 chosen from 1 choice [ 32.034582] input: KEYBOARD USB KB as /class/input/input1 [ 32.034597] input: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:0b.0-1 [ 32.045619] input: KEYBOARD USB KB as /class/input/input2 [ 32.045649] input: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:0b.0-1 [ 32.350670] usb 1-2: new low speed USB device using ohci_hcd and address 6 [ 32.518520] hdd: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive [ 32.559864] usb 1-2: configuration #1 chosen from 1 choice [ 32.575756] ide1 at 0x170-0x177,0x376 on irq 15 [ 32.591775] input: HoverStop NL Hoverstop active ergonomic mouse as /class/input/input3 [ 32.591794] input: USB HID v1.10 Mouse [HoverStop NL Hoverstop active ergonomic mouse] on usb-0000:00:0b.0-2 [ 32.897939] usb 1-4: new low speed USB device using ohci_hcd and address 7 [ 34.423394] usb 1-4: configuration #1 chosen from 1 choice [ 54.756746] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 54.919168] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 55.172062] input: PC Speaker as /class/input/input4 [ 55.226949] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 55.226961] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 55.226975] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 55.227031] sky2 v1.10 addr 0xddefc000 irq 19 Yukon-EC (0xb6) rev 2 [ 55.227423] sky2 eth0: addr 00:15:f2:b2:9c:23 [ 55.298624] nvidia: module license 'NVIDIA' taints kernel. [ 55.576177] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 55.576189] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 55.576410] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 [ 55.600589] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 55.600599] Uniform CD-ROM driver Revision: 3.20 [ 55.608332] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) [ 55.610856] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600 [ 55.610890] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700 [ 55.899769] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 [ 55.899774] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 22 [ 55.899802] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 56.214707] intel8x0_measure_ac97_clock: measured 54707 usecs [ 56.214711] intel8x0: clocking to 46892 [ 56.441727] lp: driver loaded but no devices found [ 56.509700] tun: Universal TUN/TAP device driver, 1.6 [ 56.509705] tun: (C) 1999-2004 Max Krasnyansky [ 56.639855] Adding 3076436k swap on /dev/disk/by-uuid/7323f5d8-9be9-4110-90d4-a3fbe5b7da33. Priority:-1 extents:1 across:3076436k [ 65.805585] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 65.805818] SGI XFS Quota Management subsystem [ 65.841859] XFS mounting filesystem sda3 [ 65.954810] Ending clean XFS mount for filesystem: sda3 [ 65.999831] XFS mounting filesystem sdb1 [ 66.090281] Ending clean XFS mount for filesystem: sdb1 [ 66.495676] ttyS0: LSR safety check engaged! [ 66.496545] ttyS0: LSR safety check engaged! [ 68.119175] Using specific hotkey driver [ 68.251201] No dock devices found. [ 68.354761] input: Power Button (FF) as /class/input/input5 [ 68.354833] ACPI: Power Button (FF) [PWRF] [ 68.354905] input: Power Button (CM) as /class/input/input6 [ 68.354927] ACPI: Power Button (CM) [PWRB] [ 68.450991] ibm_acpi: ec object not found [ 68.579363] pcc_acpi: loading... [ 68.815697] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) [ 68.815820] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 68.815825] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 68.815827] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 71.684535] ttyS0: LSR safety check engaged! [ 74.743158] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 3:00.0] forgot to specify physical device; fix it! [ 74.745334] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 3:00.0] forgot to specify physical device; fix it! [ 74.746722] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 3:00.0] forgot to specify physical device; fix it! [ 76.293257] ppdev: user-space parallel port driver [ 79.140268] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! [ 80.049737] Bluetooth: Core ver 2.11 [ 80.049808] NET: Registered protocol family 31 [ 80.049811] Bluetooth: HCI device and connection manager initialized [ 80.049815] Bluetooth: HCI socket layer initialized [ 80.089937] Bluetooth: L2CAP ver 2.8 [ 80.089941] Bluetooth: L2CAP socket layer initialized [ 80.209538] Bluetooth: RFCOMM socket layer initialized [ 80.209558] Bluetooth: RFCOMM TTY layer initialized [ 80.209561] Bluetooth: RFCOMM ver 1.8 [ 119.016314] sky2 eth0: enabling interface [ 119.017325] sky2 eth0: ram buffer 48K [ 120.590609] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both