ubuntu@ubuntu:~$ dmesg [ 0.000000] Linux version 2.6.22-9-generic (buildd@palmer) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:50:37 GMT 2007 (Ubuntu 2.6.22-9.25-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037e70000 (usable) [ 0.000000] BIOS-e820: 0000000037e70000 - 0000000037e81000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037e81000 - 0000000037f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 894MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f8780 [ 0.000000] Entering add_active_range(0, 0, 228976) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 228976 [ 0.000000] HighMem 228976 -> 228976 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 228976 [ 0.000000] On node 0 totalpages: 228976 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1756 pages used for memmap [ 0.000000] Normal zone: 223124 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F8750, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 37E7A60C, 003C (r1 DELL M08 6040000 LTP 0) [ 0.000000] ACPI: FACP 37E80C4D, 0074 (r1 ATI Bowfin 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 37E7A648, 6605 (r1 ATI SB600 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 37E91FC0, 0040 [ 0.000000] ACPI: TCPA 37E80CC1, 0032 (r2 AMD 6040000 PTEC 0) [ 0.000000] ACPI: SSDT 37E80CF3, 0115 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 37E80E08, 0046 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 37E80E4E, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: SLIC 37E80E8A, 0176 (r1 DELL M08 6040000 LTP 0) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:12 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 227188 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.226 MHz processor. [ 29.453696] Console: colour VGA+ 80x25 [ 29.453983] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 29.454323] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 29.467348] Memory: 896396k/915904k available (2010k kernel code, 18884k reserved, 917k data, 364k init, 0k highmem) [ 29.467358] virtual kernel memory layout: [ 29.467359] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 29.467360] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 29.467361] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 29.467363] lowmem : 0xc0000000 - 0xf7e70000 ( 894 MB) [ 29.467364] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 29.467365] .data : 0xc02f6806 - 0xc03dbe64 ( 917 kB) [ 29.467366] .text : 0xc0100000 - 0xc02f6806 (2010 kB) [ 29.467369] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 29.467400] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 29.547383] Calibrating delay using timer specific routine.. 3993.72 BogoMIPS (lpj=7987454) [ 29.547404] Security Framework v1.0.0 initialized [ 29.547408] SELinux: Disabled at boot. [ 29.547420] Mount-cache hash table entries: 512 [ 29.547514] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d [ 29.547522] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 29.547525] CPU: L2 Cache: 512K (64 bytes/line) [ 29.547527] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d [ 29.547536] Compat vDSO mapped to ffffe000. [ 29.547545] Checking 'hlt' instruction... OK. [ 29.563473] SMP alternatives: switching to UP code [ 29.563602] Freeing SMP alternatives: 11k freed [ 29.563832] Early unpacking initramfs... done [ 29.849950] ACPI: Core revision 20070126 [ 29.850015] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 30.886170] CPU0: AMD Turion(tm) 64 Mobile Technology MK-36 stepping 02 [ 30.886189] Total of 1 processors activated (3993.72 BogoMIPS). [ 30.886346] ENABLING IO-APIC IRQs [ 30.886526] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 30.926230] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 30.926273] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 30.926275] ...trying to set up timer as Virtual Wire IRQ... works. [ 31.070675] Brought up 1 CPUs [ 31.070757] Booting paravirtualized kernel on bare hardware [ 31.070834] Time: 4:00:29 Date: 07/14/107 [ 31.070852] NET: Registered protocol family 16 [ 31.070920] EISA bus registered [ 31.070934] ACPI: bus type pci registered [ 31.086170] PCI: BIOS BUG #81[49435000] found [ 31.086210] PCI: Using configuration type 1 [ 31.086212] Setting up standard PCI resources [ 31.087492] ACPI: EC: Look up EC in DSDT [ 31.088374] ACPI: EC: GPE=0x14, ports=0x66, 0x62 [ 31.094029] ACPI: System BIOS is requesting _OSI(Linux) [ 31.094031] ACPI: Please test with "acpi_osi=!Linux" [ 31.094032] Please send dmidecode to linux-acpi@vger.kernel.org [ 31.094251] ACPI: Interpreter enabled [ 31.094254] ACPI: (supports S0 S3 S4 S5) [ 31.094265] ACPI: Using IOAPIC for interrupt routing [ 31.099091] ACPI: EC: GPE=0x14, ports=0x66, 0x62 [ 31.099124] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 31.099131] PCI: Probing PCI hardware (bus 00) [ 31.100502] PCI: Transparent bridge - 0000:00:14.4 [ 31.100539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 31.100701] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 31.100797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 31.100903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 31.100990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 31.103526] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 31.103622] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 31.103716] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 31.103809] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 31.103901] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 31.103994] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 31.104088] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 31.104181] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 31.104274] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 31.104342] Linux Plug and Play Support v0.97 (c) Adam Belay [ 31.104352] pnp: PnP ACPI init [ 31.104358] ACPI: bus type pnp registered [ 31.106569] pnp: PnP ACPI: found 10 devices [ 31.106571] ACPI: ACPI bus type pnp unregistered [ 31.106575] PnPBIOS: Disabled by ACPI PNP [ 31.106615] PCI: Using ACPI for IRQ routing [ 31.106617] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 31.106624] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 31.106673] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 31.106801] NET: Registered protocol family 8 [ 31.106803] NET: Registered protocol family 20 [ 31.106851] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 31.106855] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 31.106858] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 31.106867] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [ 31.106870] pnp: 00:08: ioport range 0x220-0x22f has been reserved [ 31.106874] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 31.106877] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 31.106880] pnp: 00:09: iomem range 0xc0004800-0xc0004bff has been reserved [ 31.106883] pnp: 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 31.110627] Time: tsc clocksource has been installed. [ 31.137092] PCI: Bridge: 0000:00:01.0 [ 31.137095] IO window: 9000-9fff [ 31.137098] MEM window: c0100000-c01fffff [ 31.137101] PREFETCH window: c8000000-cfffffff [ 31.137103] PCI: Bridge: 0000:00:05.0 [ 31.137104] IO window: disabled. [ 31.137107] MEM window: disabled. [ 31.137109] PREFETCH window: disabled. [ 31.137111] PCI: Bridge: 0000:00:06.0 [ 31.137113] IO window: disabled. [ 31.137115] MEM window: c0200000-c02fffff [ 31.137118] PREFETCH window: disabled. [ 31.137120] PCI: Bridge: 0000:00:14.4 [ 31.137122] IO window: disabled. [ 31.137127] MEM window: c0300000-c03fffff [ 31.137131] PREFETCH window: disabled. [ 31.137148] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 31.137154] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 31.137170] NET: Registered protocol family 2 [ 31.174626] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 31.174725] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 31.175629] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 31.175918] TCP: Hash tables configured (established 131072 bind 65536) [ 31.175920] TCP reno registered [ 31.186694] checking if image is initramfs... it is [ 31.638376] Switched to high resolution mode on CPU 0 [ 31.748390] Freeing initrd memory: 7048k freed [ 31.748693] audit: initializing netlink socket (disabled) [ 31.748705] audit(1187064027.976:1): initialized [ 31.750158] VFS: Disk quotas dquot_6.5.1 [ 31.750197] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 31.750270] io scheduler noop registered [ 31.750272] io scheduler anticipatory registered [ 31.750274] io scheduler deadline registered [ 31.750286] io scheduler cfq registered (default) [ 31.750291] PCI: MSI quirk detected. MSI deactivated. [ 31.750351] Boot video device is 0000:01:05.0 [ 31.750422] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 31.750441] assign_interrupt_mode Found MSI capability [ 31.750444] Allocate Port Service[0000:00:05.0:pcie00] [ 31.750471] Allocate Port Service[0000:00:05.0:pcie02] [ 31.750518] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 31.750536] assign_interrupt_mode Found MSI capability [ 31.750539] Allocate Port Service[0000:00:06.0:pcie00] [ 31.750560] Allocate Port Service[0000:00:06.0:pcie02] [ 31.750687] isapnp: Scanning for PnP cards... [ 32.104700] isapnp: No Plug & Play device found [ 32.125171] Real Time Clock Driver v1.12ac [ 32.125247] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 32.126063] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 32.126208] input: Macintosh mouse button emulation as /class/input/input0 [ 32.126262] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 32.129090] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 32.129095] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 32.129224] mice: PS/2 mouse device common for all mice [ 32.129312] EISA: Probing bus 0 at eisa.0 [ 32.129320] Cannot allocate resource for EISA slot 1 [ 32.129344] Cannot allocate resource for EISA slot 8 [ 32.129346] EISA: Detected 0 cards. [ 32.129422] TCP cubic registered [ 32.129434] NET: Registered protocol family 1 [ 32.129453] Using IPI No-Shortcut mode [ 32.129611] Magic number: 3:446:9 [ 32.129966] Freeing unused kernel memory: 364k freed [ 32.170229] input: AT Translated Set 2 keyboard as /class/input/input1 [ 33.321594] AppArmor: AppArmor initialized [ 33.321601] audit(1187064029.476:2): AppArmor initialized [ 33.321602] [ 33.325443] AppArmor: Registered secondary security module: capability. [ 33.325446] Capability LSM initialized as secondary [ 33.532787] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 33.532792] ACPI: Processor [CPU0] (supports 8 throttling states) [ 33.532801] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 33.756027] ACPI: Thermal Zone [THRM] (60 C) [ 34.239252] SCSI subsystem initialized [ 34.243057] libata version 2.21 loaded. [ 34.244105] ahci 0000:00:12.0: version 2.2 [ 34.244129] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 34.244142] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 34.265903] usbcore: registered new interface driver usbfs [ 34.265926] usbcore: registered new interface driver hub [ 34.265943] usbcore: registered new device driver usb [ 34.266498] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 34.337894] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 34.337899] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.952000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.980000] Time: acpi_pm clocksource has been installed. [ 4.612000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 4.612000] ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part [ 4.612000] scsi0 : ahci [ 4.612000] scsi1 : ahci [ 4.612000] scsi2 : ahci [ 4.612000] scsi3 : ahci [ 4.612000] ata1: SATA max UDMA/133 cmd 0xf8838100 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 4.612000] ata2: SATA max UDMA/133 cmd 0xf8838180 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 4.612000] ata3: SATA max UDMA/133 cmd 0xf8838200 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 4.612000] ata4: SATA max UDMA/133 cmd 0xf8838280 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 5.096000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.104000] ata1.00: ATA-7: SAMSUNG HM060HI, YD100-15, max UDMA7 [ 5.104000] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 5.108000] ata1.00: configured for UDMA/133 [ 5.420000] ata2: SATA link down (SStatus 0 SControl 300) [ 5.732000] ata3: SATA link down (SStatus 0 SControl 300) [ 6.044000] ata4: SATA link down (SStatus 0 SControl 300) [ 6.044000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM060HI YD10 PQ: 0 ANSI: 5 [ 6.044000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 6.044000] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 6.044000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 6.044000] ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0005000 [ 6.052000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 6.052000] sd 0:0:0:0: [sda] Write Protect is off [ 6.052000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.052000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.052000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 6.052000] sd 0:0:0:0: [sda] Write Protect is off [ 6.052000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.052000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.052000] sda:<6>usb usb1: configuration #1 chosen from 1 choice [ 6.100000] hub 1-0:1.0: USB hub found [ 6.100000] hub 1-0:1.0: 2 ports detected [ 6.204000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 6.204000] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 6.204000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 6.204000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xc0006000 [ 6.260000] usb usb2: configuration #1 chosen from 1 choice [ 6.260000] hub 2-0:1.0: USB hub found [ 6.260000] hub 2-0:1.0: 2 ports detected [ 6.364000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 6.364000] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 6.364000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 6.364000] ohci_hcd 0000:00:13.2: irq 19, io mem 0xc0007000 [ 6.420000] usb usb3: configuration #1 chosen from 1 choice [ 6.420000] hub 3-0:1.0: USB hub found [ 6.420000] hub 3-0:1.0: 2 ports detected [ 6.500000] sda1 [ 6.500000] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.504000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.524000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18 [ 6.524000] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 6.524000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 6.524000] ohci_hcd 0000:00:13.3: irq 18, io mem 0xc0008000 [ 6.580000] usb usb4: configuration #1 chosen from 1 choice [ 6.580000] hub 4-0:1.0: USB hub found [ 6.580000] hub 4-0:1.0: 2 ports detected [ 6.684000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19 [ 6.684000] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 6.684000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 6.684000] ohci_hcd 0000:00:13.4: irq 19, io mem 0xc0009000 [ 6.740000] usb usb5: configuration #1 chosen from 1 choice [ 6.740000] hub 5-0:1.0: USB hub found [ 6.740000] hub 5-0:1.0: 2 ports detected [ 6.844000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20 [ 6.844000] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 6.844000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 6.844000] ehci_hcd 0000:00:13.5: debug port 1 [ 6.844000] ehci_hcd 0000:00:13.5: irq 20, io mem 0xc0004400 [ 6.844000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.844000] usb usb6: configuration #1 chosen from 1 choice [ 6.844000] hub 6-0:1.0: USB hub found [ 6.844000] hub 6-0:1.0: 10 ports detected [ 6.948000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1 [ 6.948000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 6.948000] SB600_PATA: chipset revision 0 [ 6.948000] SB600_PATA: not 100% native mode: will probe irqs later [ 6.948000] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio [ 6.948000] Probing IDE interface ide0... [ 7.684000] hda: TSSTcorpCD-RW/DVD-ROM TSL462D, ATAPI CD/DVD-ROM drive [ 8.356000] hda: selected mode 0x42 [ 8.356000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 8.376000] b44.c:v1.01 (Jun 16, 2006) [ 8.376000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 8.380000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:19:b9:4f:f1:4b [ 8.384000] hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) [ 8.384000] Uniform CD-ROM driver Revision: 3.20 [ 9.968000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 10.040000] ISO 9660 Extensions: RRIP_1991A [ 10.084000] Registering unionfs 1.4 [ 10.084000] unionfs: debugging is not enabled [ 10.092000] loop: module loaded [ 10.196000] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 102.940000] Linux agpgart interface v0.102 (c) Dave Jones [ 103.064000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 103.164000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 103.748000] input: PC Speaker as /class/input/input2 [ 103.916000] NET: Registered protocol family 17 [ 104.584000] ieee80211_crypt: registered algorithm 'NULL' [ 104.624000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 104.624000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 104.644000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000 [ 104.680000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 104.724000] sdhci: Secure Digital Host Controller Interface driver [ 104.724000] sdhci: Copyright(c) Pierre Ossman [ 104.724000] sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19) [ 104.724000] ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 22 [ 104.728000] mmc0: SDHCI at 0xc0302800 irq 22 DMA [ 104.800000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 104.968000] bcm43xx driver [ 104.968000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 104.968000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 105.300000] mmcblk0: mmc0:e624 SD02G 1985024KiB [ 105.300000] mmcblk0: p1 [ 105.836000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 105.840000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 105.876000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 105.884000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 106.968000] fuse init (API version 7.8) [ 107.580000] AppArmor: Unregistered secondary security module: capability [ 113.596000] ACPI: AC Adapter [ACAD] (on-line) [ 113.664000] ACPI: Battery Slot [BAT1] (battery present) [ 113.680000] No dock devices found. [ 113.744000] input: Power Button (FF) as /class/input/input4 [ 113.748000] ACPI: Power Button (FF) [PWRF] [ 113.780000] input: Power Button (CM) as /class/input/input5 [ 113.784000] ACPI: Power Button (CM) [PWRB] [ 113.820000] input: Sleep Button (CM) as /class/input/input6 [ 113.824000] ACPI: Sleep Button (CM) [SLPB] [ 113.860000] input: Lid Switch as /class/input/input7 [ 113.864000] ACPI: Lid Switch [LID] [ 113.968000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 114.784000] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (version 2.00.00) [ 114.784000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe [ 114.784000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 [ 114.784000] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x12 [ 114.784000] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18 [ 120.808000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 121.116000] lp: driver loaded but no devices found [ 121.168000] ppdev: user-space parallel port driver [ 122.156000] audit(1187064151.198:3): PERMITTING mr access to /rofs/lib/tls/i686/cmov/libc-2.6.1.so (cupsd(7727) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.164000] audit(1187064151.198:4): PERMITTING m access to /etc/passwd (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.164000] audit(1187064151.198:5): PERMITTING m access to /etc/group (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:6): PERMITTING m access to /etc/group (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:7): PERMITTING attribute (mode,uid,gid,atime,mtime,ctime,) change to /cow/var/cache/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:8): PERMITTING xattr list on /rofs/var/cache/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:9): PERMITTING attribute (uid,gid,ctime,) change to /cow/var/cache/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:10): PERMITTING attribute (mode,ctime,) change to /cow/var/cache/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:11): PERMITTING attribute (mode,uid,gid,atime,mtime,ctime,) change to /cow/etc/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:12): PERMITTING xattr list on /rofs/etc/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:13): PERMITTING attribute (uid,gid,ctime,) change to /cow/etc/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:14): PERMITTING attribute (mode,uid,gid,atime,mtime,ctime,) change to /cow/etc/cups/ppd (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:15): PERMITTING xattr list on /rofs/etc/cups/ppd (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:16): PERMITTING attribute (uid,gid,ctime,) change to /cow/etc/cups/ppd (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.168000] audit(1187064151.198:17): PERMITTING attribute (mode,uid,gid,atime,mtime,ctime,) change to /cow/etc/cups/ssl (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:18): PERMITTING xattr list on /rofs/etc/cups/ssl (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:19): PERMITTING attribute (uid,gid,ctime,) change to /cow/etc/cups/ssl (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:20): PERMITTING attribute (mode,ctime,) change to /cow/etc/cups/ssl (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:21): PERMITTING attribute (mode,uid,gid,atime,mtime,ctime,) change to /cow/var/spool (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:22): PERMITTING attribute (mode,uid,gid,atime,mtime,ctime,) change to /cow/var/spool/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:23): PERMITTING xattr list on /rofs/var/spool/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:24): PERMITTING attribute (uid,gid,ctime,) change to /cow/var/spool/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:25): PERMITTING attribute (mode,ctime,) change to /cow/var/spool/cups (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:26): PERMITTING attribute (mode,uid,gid,atime,mtime,ctime,) change to /cow/var/spool/cups/tmp (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:27): PERMITTING xattr list on /rofs/var/spool/cups/tmp (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:28): PERMITTING attribute (uid,gid,ctime,) change to /cow/var/spool/cups/tmp (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.172000] audit(1187064151.198:29): PERMITTING attribute (mode,ctime,) change to /cow/var/spool/cups/tmp (cupsd(7728) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 122.836000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 126.296000] apm: BIOS not found. [ 126.576000] AppArmor: Registered secondary security module: capability. [ 126.576000] Capability LSM initialized as secondary [ 127.000000] Clocksource tsc unstable (delta = -82241013 ns) [ 127.412000] Bluetooth: Core ver 2.11 [ 127.412000] NET: Registered protocol family 31 [ 127.412000] Bluetooth: HCI device and connection manager initialized [ 127.412000] Bluetooth: HCI socket layer initialized [ 127.508000] Bluetooth: L2CAP ver 2.8 [ 127.512000] Bluetooth: L2CAP socket layer initialized [ 128.048000] Bluetooth: RFCOMM socket layer initialized [ 128.048000] Bluetooth: RFCOMM TTY layer initialized [ 128.048000] Bluetooth: RFCOMM ver 1.8 [ 142.432000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 143.428000] NET: Registered protocol family 10 [ 143.428000] lo: Disabled Privacy Extensions [ 143.432000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 144.868000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 166.912000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 188.948000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 210.992000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 231.304000] usb 6-1: new high speed USB device using ehci_hcd and address 2 [ 231.436000] usb 6-1: configuration #1 chosen from 1 choice [ 232.368000] usbcore: registered new interface driver libusual [ 233.032000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 234.036000] Initializing USB Mass Storage driver... [ 234.036000] scsi4 : SCSI emulation for USB Mass Storage devices [ 234.044000] usb-storage: device found at 2 [ 234.044000] usb-storage: waiting for device to settle before scanning [ 234.044000] usbcore: registered new interface driver usb-storage [ 234.044000] USB Mass Storage support registered. [ 239.044000] usb-storage: device scan complete [ 239.044000] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 2.17 PQ: 0 ANSI: 2 [ 239.052000] sd 4:0:0:0: [sdb] 4013713 512-byte hardware sectors (2055 MB) [ 239.060000] sd 4:0:0:0: [sdb] Write Protect is off [ 239.060000] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 239.060000] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 239.072000] sd 4:0:0:0: [sdb] 4013713 512-byte hardware sectors (2055 MB) [ 239.076000] sd 4:0:0:0: [sdb] Write Protect is off [ 239.076000] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 239.076000] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 239.076000] sdb: sdb1 [ 239.080000] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 239.084000] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 255.076000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ lsmod Module Size Used by nls_iso8859_1 5120 1 vfat 14080 1 fat 54300 1 vfat usb_storage 72896 1 libusual 18192 1 usb_storage ipv6 273892 8 rfcomm 41880 0 l2cap 26240 5 rfcomm bluetooth 56548 4 rfcomm,l2cap capability 5896 0 ppdev 10244 0 parport_pc 37412 0 lp 12580 0 parport 37448 3 ppdev,parport_pc,lp powernow_k8 16960 0 cpufreq_userspace 5280 0 cpufreq_stats 7232 0 cpufreq_powersave 2688 0 cpufreq_ondemand 9228 1 freq_table 5792 3 powernow_k8,cpufreq_stats,cpufreq_ondemand cpufreq_conservative 8072 0 video 17544 0 sbs 19592 0 container 5504 0 button 8848 0 dock 10528 0 battery 11012 0 ac 6148 0 fuse 47124 1 snd_hda_intel 256800 1 snd_pcm_oss 44672 0 snd_mixer_oss 17664 1 snd_pcm_oss snd_pcm 80388 2 snd_hda_intel,snd_pcm_oss snd_seq_dummy 4740 0 snd_seq_oss 33152 0 snd_seq_midi 9600 0 snd_rawmidi 25728 1 snd_seq_midi mmc_block 13444 0 joydev 11328 0 snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24324 2 snd_pcm,snd_seq snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq bcm43xx 127336 0 i2c_piix4 9740 0 snd 54660 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device sdhci 18700 0 mmc_core 28420 2 mmc_block,sdhci ieee80211softmac 31360 1 bcm43xx ieee80211 35656 2 bcm43xx,ieee80211softmac ieee80211_crypt 7040 1 ieee80211 i2c_core 26112 1 i2c_piix4 soundcore 8800 1 snd snd_page_alloc 10888 2 snd_hda_intel,snd_pcm psmouse 39952 0 k8temp 6656 0 af_packet 24840 6 serio_raw 8068 0 pcspkr 4224 0 shpchp 34580 0 ati_agp 10124 0 pci_hotplug 32704 1 shpchp agpgart 35016 1 ati_agp evdev 11136 6 squashfs 48132 1 loop 19076 2 unionfs 76968 1 nls_cp437 6784 2 isofs 36412 1 ide_cd 32672 1 cdrom 37536 1 ide_cd ata_generic 8452 0 sg 36764 0 sd_mod 30336 2 b44 28300 0 mii 6528 1 b44 atiixp 7056 0 [permanent] ide_core 116548 3 usb_storage,ide_cd,atiixp ehci_hcd 36108 0 ohci_hcd 22916 0 usbcore 137864 5 usb_storage,libusual,ehci_hcd,ohci_hcd ahci 23300 0 libata 127344 2 ata_generic,ahci scsi_mod 147084 4 usb_storage,sg,sd_mod,libata thermal 14344 0 processor 31944 2 powernow_k8,thermal fan 5764 0 apparmor 55836 1 commoncap 8320 2 capability,apparmor aamatch_pcre 16768 1 apparmor ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ lspci -n 00:00.0 0600: 1002:5950 (rev 10) 00:01.0 0604: 1002:5a3f 00:05.0 0604: 1002:5a37 00:06.0 0604: 1002:5a38 00:12.0 0106: 1002:4380 00:13.0 0c03: 1002:4387 00:13.1 0c03: 1002:4388 00:13.2 0c03: 1002:4389 00:13.3 0c03: 1002:438a 00:13.4 0c03: 1002:438b 00:13.5 0c03: 1002:4386 00:14.0 0c05: 1002:4385 (rev 13) 00:14.1 0101: 1002:438c 00:14.2 0403: 1002:4383 00:14.3 0601: 1002:438d 00:14.4 0604: 1002:4384 00:18.0 0600: 1022:1100 00:18.1 0600: 1022:1101 00:18.2 0600: 1022:1102 00:18.3 0600: 1022:1103 01:05.0 0300: 1002:5975 05:00.0 0280: 14e4:4311 (rev 01) 08:00.0 0200: 14e4:170c (rev 02) 08:01.0 0805: 1180:0822 (rev 19) 08:01.1 0880: 1180:0843 (rev 01) ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ lspci -vvnn 00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10) Subsystem: Dell Unknown device [1028:01f5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:05.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:5a37] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Dell Unknown device [1028:01f5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ SERR- 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Dell Unknown device [1028:01f5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:14.0 SMBus [0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 13) Subsystem: Dell Unknown device [1028:01f5] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: Dell Unknown device [1028:01f5] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.2 Audio device [0403]: ATI Technologies Inc SB600 Azalia [1002:4383] Subsystem: Dell Unknown device [1028:01f5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Dell Unknown device [1028:01f5] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975] (prog-if 00 [VGA]) Subsystem: Dell Unknown device [1028:01f5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 05:00.0 Network controller [0280]: Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card [14e4:4311] (rev 01) Subsystem: Dell Unknown device [1028:0007] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Dell Unknown device [1028:01f5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 08:01.0 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) Subsystem: Dell Unknown device [1028:01f5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 08:01.1 System peripheral [0880]: Ricoh Co Ltd Unknown device [1180:0843] (rev 01) Subsystem: Dell Unknown device [1028:01f5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo lspci -vvnn 00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10) Subsystem: Dell Unknown device [1028:01f5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [44] HyperTransport: MSI Mapping Capabilities: [b0] Subsystem: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] 00:05.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:5a37] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device [1002:5950] Capabilities: [b8] HyperTransport: MSI Mapping 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device [1002:5950] Capabilities: [b8] HyperTransport: MSI Mapping 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Dell Unknown device [1028:01f5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-