stevi@eiram:~$ tail -2 /proc/asound/oss/sndstat
Mixers:
0: Realtek ALC861
stevi@eiram:~$ amixer
Simple mixer control 'Master',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front Mic',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'Line',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'CD',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 23
  Mono: Capture [on]
  Front Left: Playback 23 [100%] [33.00dB] [on]
  Front Right: Playback 23 [100%] [33.00dB] [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 13
  Front Left: Capture 0 [0%] [-6.00dB] [on]
  Front Right: Capture 0 [0%] [-6.00dB] [on]
Simple mixer control 'Mixer',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'Caller ID',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Off-hook',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
stevi@eiram:~$ lspci -nv
00:00.0 0600: 8086:27a0 (rev 03)
        Subsystem: 1179:ff10
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>

00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: f8700000-f87fffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
        Capabilities: <access denied>

00:1b.0 0403: 8086:27d8 (rev 02)
        Subsystem: 1179:ff10
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at f8d00000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Capabilities: <access denied>

00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f8800000-f88fffff
        Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff
        Capabilities: <access denied>

00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: f8900000-f89fffff
        Prefetchable memory behind bridge: 00000000f8400000-00000000f85fffff
        Capabilities: <access denied>

00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 1800 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 1820 [size=32]

00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 1840 [size=32]

00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at 1860 [size=32]

00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 0, IRQ 19
        Memory at f8d04000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=07, subordinate=0b, sec-latency=64
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: f8a00000-f8afffff
        Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
        Capabilities: <access denied>

00:1f.0 0601: 8086:27b9 (rev 02)
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>

00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 80 [Master])
        Subsystem: 1179:ff10
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 18b0 [size=16]
        Capabilities: <access denied>

00:1f.3 0c05: 8086:27da (rev 02)
        Subsystem: 1179:ff10
        Flags: medium devsel, IRQ 10
        I/O ports at 18c0 [size=32]

01:00.0 0300: 1002:7145 (prog-if 00 [VGA])
        Subsystem: 1179:ff10
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        I/O ports at 2000 [size=256]
        Memory at f8700000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at f8720000 [disabled] [size=128K]
        Capabilities: <access denied>

05:00.0 0280: 8086:4222 (rev 02)
        Subsystem: 8086:1041
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at f8900000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

07:06.0 0607: 104c:8039
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 168, IRQ 18
        Memory at f8a07000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
        Memory window 0: 50000000-53fff000 (prefetchable)
        Memory window 1: 54000000-57fff000
        I/O window 0: 00005400-000054ff
        I/O window 1: 00005800-000058ff
        16-bit legacy interface ports at 0001

07:06.1 0c00: 104c:803a (prog-if 10 [OHCI])
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 128, IRQ 17
        Memory at f8a06000 (32-bit, non-prefetchable) [size=2K]
        Memory at f8a00000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

07:06.2 0180: 104c:803b
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 128, IRQ 18
        Memory at f8a04000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

07:06.3 0805: 104c:803c (prog-if 01)
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 128, IRQ 18
        Memory at f8a06800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

07:08.0 0200: 8086:1092 (rev 02)
        Subsystem: 1179:ff10
        Flags: bus master, medium devsel, latency 66, IRQ 21
        Memory at f8a05000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at 5000 [size=64]
        Capabilities: <access denied>
stevi@eiram:~$ asoundconf listNames of available sound cards:
Intel
stevi@eiram:~$ cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /home/stevi/.asoundrc*: No such file or directory
stevi@eiram:~$ dmesg
[    0.000000] Linux version 2.6.20-9-generic (root@rothera) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu3)) #2 SMP Mon Feb 26 03:01:44 UTC 2007 (Ubuntu 2.6.20-9.16-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fd70000 end: 000000003fe70000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003fe70000 size: 0000000000090000 end: 000000003ff00000 type: 4
[    0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[    0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
[    0.000000]  BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f6a10
[    0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261744
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261744
[    0.000000] On node 0 totalpages: 261744
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 252 pages used for memmap
[    0.000000]   HighMem zone: 32116 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v002 TOSINV                                ) @ 0x000f6960
[    0.000000] ACPI: XSDT (v001 TOSINV TOSINV00 0x06040000  INV 0x00000000) @ 0x3fe7875a
[    0.000000] ACPI: FADT (v003 TOSINV TOSINV00 0x06040000 ALAN 0x00000001) @ 0x3fe81bf8
[    0.000000] ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe81cec
[    0.000000] ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe81d54
[    0.000000] ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe81d8c
[    0.000000] ACPI: TCPA (v001 PTLTD  CALISTGA 0x06040000  PTL 0x00000001) @ 0x3fe81dc8
[    0.000000] ACPI: MADT (v001 TOSINV   APIC   0x06040000  INV 0x00000000) @ 0x3fe81dfa
[    0.000000] ACPI: SLIC (v001 TOSINV TOSINV00 0x06040000  INV 0x00000000) @ 0x3fe81e62
[    0.000000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x3fe81fd8
[    0.000000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x3fe79e62
[    0.000000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x3fe797d0
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x3fe78d72
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x3fe78ccc
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x3fe787e6
[    0.000000] ACPI: DSDT (v002 TOSINV CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: 2 duplicate APIC table ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:14 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] Detected 1662.584 MHz processor.
[   24.457081] Built 1 zonelists.  Total pages: 259700
[   24.457085] Kernel command line: root=UUID=38eb5f6a-19e3-42fe-a4bb-fac48a75fc47 ro quiet splash
[   24.457245] mapped APIC to ffffd000 (fee00000)
[   24.457247] mapped IOAPIC to ffffc000 (fec00000)
[   24.457251] Enabling fast FPU save and restore... done.
[   24.457254] Enabling unmasked SIMD FPU exception support... done.
[   24.457261] Initializing CPU#0
[   24.457334] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   24.459889] Console: colour VGA+ 80x25
[   24.460142] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   24.460499] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   24.489379] Memory: 1026960k/1046976k available (1979k kernel code, 19400k reserved, 882k data, 324k init, 129472k highmem)
[   24.489388] virtual kernel memory layout:
[   24.489390]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   24.489391]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   24.489392]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   24.489394]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   24.489395]       .init : 0xc03d1000 - 0xc0422000   ( 324 kB)
[   24.489396]       .data : 0xc02eed54 - 0xc03cb6d4   ( 882 kB)
[   24.489398]       .text : 0xc0100000 - 0xc02eed54   (1979 kB)
[   24.489401] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   24.489564] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   24.489569] hpet0: 3 64-bit timers, 14318180 Hz
[   24.490574] Using HPET for base-timer
[   24.569446] Calibrating delay using timer specific routine.. 3328.75 BogoMIPS (lpj=6657517)
[   24.569484] Security Framework v1.0.0 initialized
[   24.569491] SELinux:  Disabled at boot.
[   24.569507] Mount-cache hash table entries: 512
[   24.569629] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
[   24.569637] monitor/mwait feature present.
[   24.569639] using mwait in idle threads.
[   24.569643] CPU: L1 I cache: 32K, L1 D cache: 32K
[   24.569646] CPU: L2 cache: 2048K
[   24.569649] CPU: Physical Processor ID: 0
[   24.569650] CPU: Processor Core ID: 0
[   24.569653] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000
[   24.569671] Checking 'hlt' instruction... OK.
[   24.585516] SMP alternatives: switching to UP code
[   24.585756] ACPI: Core revision 20060707
[   24.627302] CPU0: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
[   24.627324] SMP alternatives: switching to SMP code
[   24.627352] Booting processor 1/1 eip 3000
[   24.637859] Initializing CPU#1
[   24.717218] Calibrating delay using timer specific routine.. 3325.10 BogoMIPS (lpj=6650201)
[   24.717225] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
[   24.717230] monitor/mwait feature present.
[   24.717234] CPU: L1 I cache: 32K, L1 D cache: 32K
[   24.717236] CPU: L2 cache: 2048K
[   24.717238] CPU: Physical Processor ID: 0
[   24.717240] CPU: Processor Core ID: 1
[   24.717241] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000
[   24.717717] CPU1: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
[   24.717741] Total of 2 processors activated (6653.85 BogoMIPS).
[   24.717938] ENABLING IO-APIC IRQs
[   24.718143] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   24.864992] checking TSC synchronization across 2 CPUs: passed.
[    0.003997] Brought up 2 CPUs
[    0.051571] migration_cost=36
[    0.051851] Booting paravirtualized kernel on bare hardware
[    0.051957] Time: 18:14:02  Date: 02/03/107
[    0.051986] NET: Registered protocol family 16
[    0.052073] EISA bus registered
[    0.052080] ACPI: bus type pci registered
[    0.052089] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[    0.052199] PCI: Not using MMCONFIG.
[    0.052425] PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7
[    0.052428] PCI: Using configuration type 1
[    0.052429] Setting up standard PCI resources
[    0.057798] ACPI: Interpreter enabled
[    0.057801] ACPI: Using IOAPIC for interrupt routing
[    0.060370] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.060374] PCI: Probing PCI hardware (bus 00)
[    0.062712] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.062717] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.062975] Boot video device is 0000:01:00.0
[    0.063945] PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling
[    0.064037] PCI: Transparent bridge - 0000:00:1e.0
[    0.064109] PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#07) (try 'pci=assign-busses')
[    0.064112] Please report the result to linux-kernel to fix this permanently
[    0.064187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.227922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.228837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.229119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.229400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.230703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.260074] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.260351] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.260625] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.260902] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.261177] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.261450] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.261726] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.262005] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.335812] ACPI: Power Resource [FN00] (off)
[    0.335963] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.335972] pnp: PnP ACPI init
[    0.431547] pnp: PnP ACPI: found 10 devices
[    0.431552] PnPBIOS: Disabled by ACPI PNP
[    0.431592] PCI: Using ACPI for IRQ routing
[    0.431595] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.461247] PCI: Bridge: 0000:00:01.0
[    0.461250]   IO window: 2000-2fff
[    0.461254]   MEM window: f8700000-f87fffff
[    0.461258]   PREFETCH window: f0000000-f7ffffff
[    0.461261] PCI: Bridge: 0000:00:1c.0
[    0.461263]   IO window: disabled.
[    0.461269]   MEM window: disabled.
[    0.461273]   PREFETCH window: disabled.
[    0.461279] PCI: Bridge: 0000:00:1c.1
[    0.461282]   IO window: 3000-3fff
[    0.461288]   MEM window: f8800000-f88fffff
[    0.461293]   PREFETCH window: f8200000-f83fffff
[    0.461299] PCI: Bridge: 0000:00:1c.2
[    0.461302]   IO window: 4000-4fff
[    0.461309]   MEM window: f8900000-f89fffff
[    0.461314]   PREFETCH window: f8400000-f85fffff
[    0.461327] PCI: Bus 8, cardbus bridge: 0000:07:06.0
[    0.461329]   IO window: 00005400-000054ff
[    0.461334]   IO window: 00005800-000058ff
[    0.461340]   PREFETCH window: 50000000-53ffffff
[    0.461345]   MEM window: 54000000-57ffffff
[    0.461350] PCI: Bridge: 0000:00:1e.0
[    0.461353]   IO window: 5000-5fff
[    0.461359]   MEM window: f8a00000-f8afffff
[    0.461364]   PREFETCH window: 50000000-53ffffff
[    0.461381] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.461386] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.461409] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.461416] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.461438] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[    0.461444] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.461468] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.461474] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.461488] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.461505] PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
[    0.461509] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18
[    0.461543] NET: Registered protocol family 2
[    0.507264] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.507365] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.508089] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.508458] TCP: Hash tables configured (established 131072 bind 65536)
[    0.508461] TCP reno registered
[    0.523331] checking if image is initramfs... it is
[    1.177267] Freeing initrd memory: 6712k freed
[    1.177452] Simple Boot Flag at 0x36 set to 0x1
[    1.177914] audit: initializing netlink socket (disabled)
[    1.177930] audit(1172945643.596:1): initialized
[    1.178022] highmem bounce pool size: 64 pages
[    1.178107] VFS: Disk quotas dquot_6.5.1
[    1.178125] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.178171] io scheduler noop registered
[    1.178174] io scheduler anticipatory registered
[    1.178183] io scheduler deadline registered
[    1.178195] io scheduler cfq registered (default)
[    1.178439] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    1.178474] assign_interrupt_mode Found MSI capability
[    1.178510] Allocate Port Service[0000:00:01.0:pcie00]
[    1.178602] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.178657] assign_interrupt_mode Found MSI capability
[    1.178700] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.178741] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.178866] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.178922] assign_interrupt_mode Found MSI capability
[    1.178964] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.178997] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.179119] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.179175] assign_interrupt_mode Found MSI capability
[    1.179218] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.179249] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.179431] isapnp: Scanning for PnP cards...
[    1.533471] isapnp: No Plug & Play device found
[    1.557139] Real Time Clock Driver v1.12ac
[    1.557207] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.557858] mice: PS/2 mouse device common for all mice
[    1.558430] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.558583] input: Macintosh mouse button emulation as /class/input/input0
[    1.558619] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.558623] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.558916] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.561511] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.562988] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.562992] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.562994] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.562997] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.563000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.563080] EISA: Probing bus 0 at eisa.0
[    1.563088] Cannot allocate resource for EISA slot 1
[    1.563091] Cannot allocate resource for EISA slot 2
[    1.563094] Cannot allocate resource for EISA slot 3
[    1.563096] Cannot allocate resource for EISA slot 4
[    1.563099] Cannot allocate resource for EISA slot 5
[    1.563114] EISA: Detected 0 cards.
[    1.593173] TCP cubic registered
[    1.593182] NET: Registered protocol family 1
[    1.593188] NET: Registered protocol family 8
[    1.593191] NET: Registered protocol family 20
[    1.593226] Starting balanced_irq
[    1.593238] Using IPI No-Shortcut mode
[    1.593333] ACPI: (supports S0 S3 S4 S5)
[    1.593382]   Magic number: 15:282:240
[    1.593412]   hash matches device ttysd
[    1.593574] Time: tsc clocksource has been installed.
[    1.593654] Freeing unused kernel memory: 324k freed
[    1.597579] input: AT Translated Set 2 keyboard as /class/input/input1
[    2.785853] Capability LSM initialized
[    2.817512] ACPI: Transitioning device [FAN0] to D3
[    2.817516] ACPI: Transitioning device [FAN0] to D3
[    2.817519] ACPI: Fan [FAN0] (off)
[    2.821172] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[    2.821449] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[    2.822136] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    2.822141] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.822686] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[    2.822913] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[    2.823670] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    2.823676] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.824529] ACPI: Thermal Zone [TZ00] (28 C)
[    2.825132] ACPI: Invalid passive threshold
[    2.825769] ACPI: Transitioning device [FAN0] to D0
[    2.825771] ACPI: Transitioning device [FAN0] to D0
[    2.825774] ACPI: Unable to turn cooling device [df95afcc] 'on'
[    2.825777] ACPI: Thermal Zone [TZ01] (19 C)
[    3.080000] Time: hpet clocksource has been installed.
[    3.416000] usbcore: registered new interface driver usbfs
[    3.416000] usbcore: registered new interface driver hub
[    3.416000] usbcore: registered new device driver usb
[    3.416000] USB Universal Host Controller Interface driver v3.0
[    3.416000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[    3.416000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.416000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.416000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.416000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[    3.416000] usb usb1: configuration #1 chosen from 1 choice
[    3.416000] hub 1-0:1.0: USB hub found
[    3.416000] hub 1-0:1.0: 2 ports detected
[    3.520000] ieee1394: Initialized config rom entry `ip1394'
[    3.524000] hub 1-0:1.0: over-current change on port 1
[    3.524000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[    3.524000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.524000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.524000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.524000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[    3.524000] usb usb2: configuration #1 chosen from 1 choice
[    3.524000] hub 2-0:1.0: USB hub found
[    3.524000] hub 2-0:1.0: 2 ports detected
[    3.548000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[    3.548000] e100: Copyright(c) 1999-2006 Intel Corporation
[    3.628000] hub 1-0:1.0: over-current change on port 2
[    3.628000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.628000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.628000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.628000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.628000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    3.628000] usb usb3: configuration #1 chosen from 1 choice
[    3.628000] hub 3-0:1.0: USB hub found
[    3.628000] hub 3-0:1.0: 2 ports detected
[    3.732000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    3.732000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.732000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.732000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.732000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    3.732000] usb usb4: configuration #1 chosen from 1 choice
[    3.732000] hub 4-0:1.0: USB hub found
[    3.732000] hub 4-0:1.0: 2 ports detected
[    3.836000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[    3.836000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.836000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.836000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.836000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.836000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.836000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8d04000
[    3.840000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.840000] usb usb5: configuration #1 chosen from 1 choice
[    3.840000] hub 5-0:1.0: USB hub found
[    3.840000] hub 5-0:1.0: 8 ports detected
[    3.944000] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 21
[    3.972000] e100: eth0: e100_probe: addr 0xf8a05000, irq 21, MAC addr 00:A0:D1:41:C6:22
[    3.972000] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 17
[    4.024000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8a06000-f8a067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    4.028000] SCSI subsystem initialized
[    4.032000] libata version 2.00 loaded.
[    4.036000] ata_piix 0000:00:1f.2: version 2.00ac7
[    4.036000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    4.192000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[    4.192000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.192000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[    4.192000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[    4.192000] scsi0 : ata_piix
[    4.480000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    4.508000] ata1.00: ATA-7, max UDMA/100, 117210240 sectors: LBA48 NCQ (depth 0/32)
[    4.508000] ata1.00: ata1: dev 0 multi count 16
[    4.660000] usb 3-1: configuration #1 chosen from 1 choice
[    4.676000] usbcore: registered new interface driver hiddev
[    4.680000] ata1.00: configured for UDMA/100
[    4.680000] scsi1 : ata_piix
[    4.688000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[    4.688000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1
[    4.688000] usbcore: registered new interface driver usbhid
[    4.688000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[    5.000000] ata2.00: ATAPI, max UDMA/33
[    5.164000] ata2.00: configured for UDMA/33
[    5.168000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5
[    5.172000] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-K16A 1.63 PQ: 0 ANSI: 5
[    5.184000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[    5.184000] sda: Write Protect is off
[    5.184000] sda: Mode Sense: 00 3a 00 00
[    5.184000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.184000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[    5.184000] sda: Write Protect is off
[    5.184000] sda: Mode Sense: 00 3a 00 00
[    5.184000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.184000]  sda: sda1 sda2 sda3 < sda5 > sda4
[    5.232000] sd 0:0:0:0: Attached scsi disk sda
[    5.236000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.236000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.244000] sr0: scsi3-mmc drive: 31x/31x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.244000] Uniform CD-ROM driver Revision: 3.20
[    5.244000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.300000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d141c622]
[    5.516000] Attempting manual resume
[    5.516000] swsusp: Resume From Partition 8:5
[    5.516000] PM: Checking swsusp image.
[    5.516000] PM: Resume from disk failed.
[    5.536000] kjournald starting.  Commit interval 5 seconds
[    5.536000] EXT3-fs: mounted filesystem with ordered data mode.
[   15.376000] Linux agpgart interface v0.101 (c) Dave Jones
[   15.420000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.460000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.640000] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
[   15.640000] Yenta: Enabling burst memory read transactions
[   15.640000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   15.640000] Yenta: Routing CardBus interrupts to PCI
[   15.640000] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
[   15.660000] intel_rng: FWH not detected
[   15.704000] agpgart: Detected an Intel 945GM Chipset.
[   15.724000] agpgart: AGP aperture is 256M @ 0x0
[   15.732000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[   15.732000] sdhci: Copyright(c) Pierre Ossman
[   15.872000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[   15.872000] Socket status: 30000006
[   15.872000] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
[   15.876000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[   15.876000] cs: IO port probe 0x5000-0x5fff: clean.
[   15.876000] pcmcia: parent PCI bridge Memory window: 0xf8a00000 - 0xf8afffff
[   15.876000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   15.876000] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
[   15.876000] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18
[   15.876000] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
[   15.876000] mmc0: SDHCI at 0xf8a06800 irq 18 DMA
[   15.880000] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18
[   15.900000] iTCO_vendor_support: vendor-support=0
[   15.900000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   16.036000] ieee80211_crypt: registered algorithm 'NULL'
[   16.036000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   16.036000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   16.100000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[   16.100000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   16.104000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   16.104000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   16.104000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   16.268000] cs: IO port probe 0x100-0x3af: clean.
[   16.268000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 0x4d0-0x4d7
[   16.272000] cs: IO port probe 0x820-0x8ff: clean.
[   16.272000] cs: IO port probe 0xc00-0xcf7: clean.
[   16.272000] cs: IO port probe 0xa00-0xaff: clean.
[   16.312000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   16.312000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   16.356000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[   16.356000] synaptics: Toshiba Satellite Pro A100 detected, limiting rate to 40pps.
[   16.392000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   16.396000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   16.396000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.952000] lp: driver loaded but no devices found
[   16.996000] Adding 1212868k swap on /dev/disk/by-uuid/0b5c9d19-3781-4cf0-afbc-9c9c85343e20.  Priority:-1 extents:1 across:1212868k
[   17.184000] EXT3 FS on sda2, internal journal
[   17.408000] kjournald starting.  Commit interval 5 seconds
[   17.408000] EXT3 FS on sda4, internal journal
[   17.408000] EXT3-fs: mounted filesystem with ordered data mode.
[   17.460000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   17.528000] NTFS volume version 3.1.
[   18.004000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[   18.096000] Using specific hotkey driver
[   18.204000] input: Power Button (FF) as /class/input/input4
[   18.204000] ACPI: Power Button (FF) [PWRF]
[   18.208000] input: Lid Switch as /class/input/input5
[   18.272000] ACPI: Lid Switch [LID]
[   18.272000] input: Power Button (CM) as /class/input/input6
[   18.272000] ACPI: Power Button (CM) [PWRB]
[   18.300000] ACPI: AC Adapter [ADP0] (on-line)
[   18.428000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   18.428000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   18.516000] ibm_acpi: ec object not found
[   18.584000] ACPI: Battery Slot [BAT0] (battery present)
[   18.600000] ACPI: Error installing notify handler
[   18.600000] Device 'dock.0' does not have a release() function, it is broken and must be fixed.
[   18.600000] BUG: at drivers/base/core.c:104 device_release()
[   18.600000]  [<c01ec459>] kobject_cleanup+0x49/0x90
[   18.600000]  [<c01ec4a0>] kobject_release+0x0/0x10
[   18.600000]  [<c01ed15b>] kref_put+0x2b/0xa0
[   18.600000]  [<f8d1d723>] find_dock+0x1d0/0x1f0 [dock]
[   18.600000]  [<c021b17d>] acpi_ns_walk_namespace+0xf9/0x114
[   18.600000]  [<c0219934>] acpi_walk_namespace+0x57/0x74
[   18.600000]  [<f8d1d553>] find_dock+0x0/0x1f0 [dock]
[   18.600000]  [<f8a5903c>] dock_init+0x3c/0x55 [dock]
[   18.600000]  [<f8d1d553>] find_dock+0x0/0x1f0 [dock]
[   18.600000]  [<c0143ded>] sys_init_module+0x15d/0x1ba0
[   18.600000]  [<c0107a3d>] sys_mmap2+0xcd/0xd0
[   18.600000]  [<c01031d0>] sysenter_past_esp+0x69/0xa9
[   18.600000]  =======================
[   18.600000] No dock devices found.
[   22.084000] ppdev: user-space parallel port driver
[   22.840000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   22.844000] [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
[   22.844000] [fglrx] module loaded - fglrx 8.33.6 [Jan  8 2007] on minor 0
[   22.956000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   24.412000] apm: BIOS not found.
[   25.088000] [fglrx] total      GART = 130023424
[   25.088000] [fglrx] free       GART = 114032640
[   25.088000] [fglrx] max single GART = 114032640
[   25.088000] [fglrx] total      LFB  = 134086656
[   25.088000] [fglrx] free       LFB  = 119697408
[   25.088000] [fglrx] max single LFB  = 119697408
[   25.088000] [fglrx] total      Inv  = 0
[   25.088000] [fglrx] free       Inv  = 0
[   25.088000] [fglrx] max single Inv  = 0
[   25.088000] [fglrx] total      TIM  = 0
[   28.716000] Bluetooth: Core ver 2.11
[   28.716000] NET: Registered protocol family 31
[   28.716000] Bluetooth: HCI device and connection manager initialized
[   28.716000] Bluetooth: HCI socket layer initialized
[   28.772000] Bluetooth: L2CAP ver 2.8
[   28.772000] Bluetooth: L2CAP socket layer initialized
[   28.856000] Bluetooth: RFCOMM socket layer initialized
[   28.856000] Bluetooth: RFCOMM TTY layer initialized
[   28.856000] Bluetooth: RFCOMM ver 1.8
[   37.668000] NET: Registered protocol family 10
[   37.668000] lo: Disabled Privacy Extensions
[   37.668000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   37.668000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   39.992000] UDF-fs: No VRS found
[   40.464000] ISO 9660 Extensions: Microsoft Joliet Level 3
[   40.972000] ISO 9660 Extensions: RRIP_1991A
[   47.496000] NET: Registered protocol family 17
[   50.532000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   51.472000] ieee80211_crypt: registered algorithm 'TKIP'
[   70.720000] eth1: no IPv6 routers present
stevi@eiram:~$ cat /proc/interrupts
           CPU0       CPU1       
  0:     994883          0   IO-APIC-edge      timer
  1:       5339          0   IO-APIC-edge      i8042
  8:         68          0   IO-APIC-edge      rtc
  9:       1802          0   IO-APIC-fasteoi   acpi
 12:        133          0   IO-APIC-edge      i8042
 14:      33325          0   IO-APIC-edge      libata
 15:       9923          0   IO-APIC-edge      libata
 16:     239932          0   IO-APIC-fasteoi   uhci_hcd:usb4, fglrx
 17:          4          0   IO-APIC-fasteoi   ohci1394
 18:     352813      96519   IO-APIC-fasteoi   uhci_hcd:usb3, yenta, sdhci:slot0, tifm_7xx1, ipw3945
 19:          2          0   IO-APIC-fasteoi   uhci_hcd:usb1, ehci_hcd:usb5
 20:          0          0   IO-APIC-fasteoi   uhci_hcd:usb2
 21:       1978          0   IO-APIC-fasteoi   eth0
 22:       1235          0   IO-APIC-fasteoi   HDA Intel
NMI:          0          0 
LOC:     994166     994173 
ERR:          0
MIS:          0