Comment 630 for bug 88746

The hub doesn't help. When I've only copied from the pendrive (and
done du -s *) it worked but with different pendrive and coping to it:
usb 6-8.3: new high speed USB device using ehci_hcd and address 8
usb 6-8.3: configuration #1 chosen from 1 choice
usb 6-8.3: New USB device found, idVendor=13fe, idProduct=1d00
usb 6-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-8.3: Product: DataTraveler 2.0
usb 6-8.3: Manufacturer: Kingston
usb 6-8.3: SerialNumber: 5B6C13851DC0
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdc] 4030464 512-byte hardware sectors (2064 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] 4030464 512-byte hardware sectors (2064 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
usb 6-8.3: reset high speed USB device using ehci_hcd and address 8
sd 4:0:0:0: [sdc] Result: hostbyte=0x05 driverbyte=0x00
end_request: I/O error, dev sdc, sector 265
usb 6-8.3: reset high speed USB device using ehci_hcd and address 8
usb 6-8.3: reset high speed USB device using ehci_hcd and address 8
usb 6-8.3: reset high speed USB device using ehci_hcd and address 8
usb 6-8.3: reset high speed USB device using ehci_hcd and address 8
usb 6-8.3: reset high speed USB device using ehci_hcd and address 8
usb 6-8.3: device descriptor read/all, error -110
usb 6-8.3: reset high speed USB device using ehci_hcd and address 8
usb 6-8.3: reset high speed USB device using ehci_hcd and address 8