[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=0fa4cae6-4258-45b8-b6bd-cfc0c8975f2c ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fef0000 (usable) [ 0.000000] BIOS-e820: 000000006fef0000 - 000000006fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fef3000 - 000000006ff00000 (ACPI data) [ 0.000000] BIOS-e820: 0000000070000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458480) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.5 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7FB0 checksum 0 [ 0.000000] ACPI: RSDP 000F7FB0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 6FEF3040, 0034 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: FACP 6FEF30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] [ 0.000000] ACPI: DSDT 6FEF3180, 63F8 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 6FEF0000, 0040 [ 0.000000] ACPI: HPET 6FEF9680, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) [ 0.000000] ACPI: MCFG 6FEF9700, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: APIC 6FEF95C0, 007C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006fef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458480) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000006fef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 458480 [ 0.000000] On node 0 totalpages: 458383 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1140 pages reserved [ 0.000000] DMA zone: 2803 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6212 pages used for memmap [ 0.000000] DMA32 zone: 448172 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 450975 [ 0.000000] Kernel command line: root=UUID=0fa4cae6-4258-45b8-b6bd-cfc0c8975f2c ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 16.367141] time.c: Detected 2612.036 MHz processor. [ 16.369948] Console: colour VGA+ 80x25 [ 16.369961] Checking aperture... [ 16.369964] CPU 0: aperture @ f14000000 size 32 MB [ 16.369965] Aperture too small (32 MB) [ 16.375644] No AGP bridge found [ 16.388121] Memory: 1796032k/1833920k available (2274k kernel code, 37500k reserved, 1181k data, 296k init) [ 16.388158] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.464849] Calibrating delay using timer specific routine.. 5228.95 BogoMIPS (lpj=10457912) [ 16.464875] Security Framework v1.0.0 initialized [ 16.464880] SELinux: Disabled at boot. [ 16.465009] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 16.466005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.466505] Mount-cache hash table entries: 256 [ 16.466609] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.466611] CPU: L2 Cache: 1024K (64 bytes/line) [ 16.466613] CPU 0/0 -> Node 0 [ 16.466615] CPU: Physical Processor ID: 0 [ 16.466616] CPU: Processor Core ID: 0 [ 16.466631] SMP alternatives: switching to UP code [ 16.466829] Early unpacking initramfs... done [ 16.702369] ACPI: Core revision 20070126 [ 16.702414] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.745376] Using local APIC timer interrupts. [ 16.783660] result 12557854 [ 16.783661] Detected 12.557 MHz APIC timer. [ 16.784864] SMP alternatives: switching to SMP code [ 16.784936] Booting processor 1/2 APIC 0x1 [ 16.795133] Initializing CPU#1 [ 16.872922] Calibrating delay using timer specific routine.. 5224.14 BogoMIPS (lpj=10448299) [ 16.872928] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.872929] CPU: L2 Cache: 1024K (64 bytes/line) [ 16.872931] CPU 1/1 -> Node 0 [ 16.872933] CPU: Physical Processor ID: 0 [ 16.872934] CPU: Processor Core ID: 1 [ 16.873023] AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 16.876818] Brought up 2 CPUs [ 17.537256] migration_cost=298 [ 17.537295] NET: Registered protocol family 16 [ 17.537360] ACPI: bus type pci registered [ 17.537365] PCI: Using configuration type 1 [ 17.538246] ACPI: EC: Look up EC in DSDT [ 17.542632] ACPI: Interpreter enabled [ 17.542634] ACPI: (supports S0 S1 S4 S5) [ 17.542646] ACPI: Using IOAPIC for interrupt routing [ 17.550015] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.550021] PCI: Probing PCI hardware (bus 00) [ 17.550467] PCI: Transparent bridge - 0000:00:04.0 [ 17.550634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.550813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 17.595941] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.596072] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.596202] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.596331] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.596461] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.596590] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.596719] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.596850] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.596981] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15) [ 17.597111] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.597241] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 17.597372] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 17.597502] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 17.597632] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15) [ 17.597762] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 17.597894] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 17.598023] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.598154] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 17.598283] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.598441] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 17.598592] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 17.598743] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 17.598893] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 17.599044] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 17.599195] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 17.599346] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 17.599497] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 17.599648] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 17.599800] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 17.599952] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 17.600105] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 [ 17.600257] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 17.600409] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 17.600560] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 17.600712] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 17.600865] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 17.601017] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 17.601169] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 17.601246] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.601255] pnp: PnP ACPI init [ 17.601261] ACPI: bus type pnp registered [ 17.605258] pnp: PnP ACPI: found 14 devices [ 17.605259] ACPI: ACPI bus type pnp unregistered [ 17.605302] PCI: Using ACPI for IRQ routing [ 17.605305] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.605356] NET: Registered protocol family 8 [ 17.605357] NET: Registered protocol family 20 [ 17.605408] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 17.605412] hpet0: 3 32-bit timers, 25000000 Hz [ 17.606458] pnp: 00:01: ioport range 0x1000-0x107f has been reserved [ 17.606460] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 17.606462] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 17.606465] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved [ 17.606467] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 17.606469] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 17.606471] pnp: 00:01: ioport range 0x2000-0x207f has been reserved [ 17.606473] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved [ 17.606476] pnp: 00:01: iomem range 0xfec80000-0xfecbffff has been reserved [ 17.606478] pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 17.606481] pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 17.606483] pnp: 00:01: iomem range 0x70000000-0x7fffffff could not be reserved [ 17.606490] pnp: 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 17.606494] pnp: 00:0d: iomem range 0xf0000-0xfffff could not be reserved [ 17.606496] pnp: 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 17.606499] pnp: 00:0d: iomem range 0x6fef0000-0x6fefffff could not be reserved [ 17.606501] pnp: 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 17.606737] PCI: Bridge: 0000:00:04.0 [ 17.606739] IO window: c000-cfff [ 17.606742] MEM window: fde00000-fdefffff [ 17.606744] PREFETCH window: fd700000-fd7fffff [ 17.606747] PCI: Bridge: 0000:00:09.0 [ 17.606748] IO window: b000-bfff [ 17.606750] MEM window: fdd00000-fddfffff [ 17.606753] PREFETCH window: fdc00000-fdcfffff [ 17.606754] PCI: Bridge: 0000:00:0b.0 [ 17.606756] IO window: a000-afff [ 17.606758] MEM window: fdb00000-fdbfffff [ 17.606761] PREFETCH window: fda00000-fdafffff [ 17.606762] PCI: Bridge: 0000:00:0c.0 [ 17.606764] IO window: 9000-9fff [ 17.606766] MEM window: fd900000-fd9fffff [ 17.606768] PREFETCH window: fd800000-fd8fffff [ 17.606776] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 17.606781] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 17.606786] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 17.606790] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 17.606799] NET: Registered protocol family 2 [ 17.608866] Time: hpet clocksource has been installed. [ 17.652811] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 17.653416] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 17.655877] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 17.656369] TCP: Hash tables configured (established 262144 bind 65536) [ 17.656371] TCP reno registered [ 17.668839] checking if image is initramfs... it is [ 18.129853] Freeing initrd memory: 7730k freed [ 18.133922] audit: initializing netlink socket (disabled) [ 18.133934] audit(1194913442.736:1): initialized [ 18.135396] VFS: Disk quotas dquot_6.5.1 [ 18.135435] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 18.135497] io scheduler noop registered [ 18.135498] io scheduler anticipatory registered [ 18.135500] io scheduler deadline registered [ 18.135563] io scheduler cfq registered (default) [ 18.136569] Boot video device is 0000:00:0d.0 [ 18.136675] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 18.136692] assign_interrupt_mode Found MSI capability [ 18.136694] Allocate Port Service[0000:00:09.0:pcie00] [ 18.136743] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 18.136759] assign_interrupt_mode Found MSI capability [ 18.136761] Allocate Port Service[0000:00:0b.0:pcie00] [ 18.136804] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 18.136831] assign_interrupt_mode Found MSI capability [ 18.136833] Allocate Port Service[0000:00:0c.0:pcie00] [ 18.153912] Real Time Clock Driver v1.12ac [ 18.154079] hpet_resources: 0xfeff0000 is busy [ 18.154094] Linux agpgart interface v0.102 (c) Dave Jones [ 18.154097] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.154186] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.154623] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.155122] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.155250] input: Macintosh mouse button emulation as /class/input/input0 [ 18.155299] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 18.155301] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 18.157424] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.157428] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.157503] mice: PS/2 mouse device common for all mice [ 18.157599] TCP cubic registered [ 18.157644] NET: Registered protocol family 1 [ 18.157787] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 18.157793] Freeing unused kernel memory: 296k freed [ 18.353504] input: AT Translated Set 2 keyboard as /class/input/input1 [ 19.301607] AppArmor: AppArmor initialized<5>audit(1194913443.908:2): type=1505 info="AppArmor initialized" pid=1264 [ 19.305359] fuse init (API version 7.8) [ 19.308566] Failure registering capabilities with primary security module. [ 19.335172] ACPI: Fan [FAN] (on) [ 19.339177] ACPI: Thermal Zone [THRM] (40 C) [ 19.690533] usbcore: registered new interface driver usbfs [ 19.690556] usbcore: registered new interface driver hub [ 19.690574] usbcore: registered new device driver usb [ 19.691158] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.691473] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 19.691482] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 19.691905] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.691912] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 19.692075] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 19.692091] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 19.750671] usb usb1: configuration #1 chosen from 1 choice [ 19.750691] hub 1-0:1.0: USB hub found [ 19.750699] hub 1-0:1.0: 8 ports detected [ 19.752792] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.752795] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.756834] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 19.763332] SCSI subsystem initialized [ 19.778969] libata version 2.21 loaded. [ 19.800263] FDC 0 is a post-1991 82077 [ 19.856992] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 19.857002] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 19.857386] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 19.857392] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 19.857435] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 19.857467] ehci_hcd 0000:00:02.1: debug port 1 [ 19.857470] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 19.857482] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 19.857489] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.857557] usb usb2: configuration #1 chosen from 1 choice [ 19.857578] hub 2-0:1.0: USB hub found [ 19.857584] hub 2-0:1.0: 8 ports detected [ 19.964711] sata_nv 0000:00:08.0: version 3.4 [ 19.964990] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 19.964999] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 [ 19.965382] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 19.965508] scsi0 : sata_nv [ 19.965544] scsi1 : sata_nv [ 19.965603] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001d800 irq 21 [ 19.965606] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001d808 irq 21 [ 20.440506] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 20.497947] ata1.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133 [ 20.497951] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 20.508494] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 20.572907] ata1.00: configured for UDMA/133 [ 20.738673] usb 1-1: configuration #1 chosen from 1 choice [ 20.747544] usbcore: registered new interface driver hiddev [ 20.762958] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input2 [ 20.763067] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:02.0-1 [ 20.763081] usbcore: registered new interface driver usbhid [ 20.763084] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 21.048454] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 21.104444] ata2.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133 [ 21.104448] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 21.179399] ata2.00: configured for UDMA/133 [ 21.179368] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5 [ 21.179647] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5 [ 21.180562] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0 [ 21.180578] NFORCE-MCP61: chipset revision 162 [ 21.180579] NFORCE-MCP61: not 100% native mode: will probe irqs later [ 21.180586] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller [ 21.180593] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 21.180600] Probing IDE interface ide0... [ 21.584604] hda: TSSTcorp CDDVDW SH-S202J, ATAPI CD/DVD-ROM drive [ 21.868579] hdb: ST3120022A, ATA DISK drive [ 21.929523] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 21.934430] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 21.934439] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20 [ 21.934443] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 21.934448] forcedeth: using HIGHDMA [ 21.939579] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 21.939590] sd 0:0:0:0: [sda] Write Protect is off [ 21.939592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.939603] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.939645] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 21.939651] sd 0:0:0:0: [sda] Write Protect is off [ 21.939653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.940914] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.940919] sda:<6>hdb: max request size: 512KiB [ 21.942535] hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [ 21.942660] hdb: cache flushes supported [ 21.942689] hdb: hdb1 hdb2 [ 21.947647] hda: ATAPI 94X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<4>hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33 [ 21.947653] [ 21.947655] Uniform CD-ROM driver Revision: 3.20 [ 21.962112] sda1 sda2 sda3 sda4 [ 21.974408] sd 0:0:0:0: [sda] Attached SCSI disk [ 21.974551] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 21.974559] sd 1:0:0:0: [sdb] Write Protect is off [ 21.974561] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 21.974572] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.974603] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 21.974609] sd 1:0:0:0: [sdb] Write Protect is off [ 21.974610] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 21.974620] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.974622] sdb: sdb1 [ 21.993937] sd 1:0:0:0: [sdb] Attached SCSI disk [ 21.996442] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 21.996461] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 22.255579] Attempting manual resume [ 22.255582] swsusp: Resume From Partition 8:2 [ 22.255583] PM: Checking swsusp image. [ 22.255736] PM: Resume from disk failed. [ 22.282934] kjournald starting. Commit interval 5 seconds [ 22.283053] EXT3-fs: mounted filesystem with ordered data mode. [ 22.456749] eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:07.0 [ 27.778100] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 27.778247] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 27.783111] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 27.793972] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.883968] input: PC Speaker as /class/input/input3 [ 27.925330] parport_pc 00:0a: reported by Plug and Play ACPI [ 27.925375] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 27.948173] nvidia: module license 'NVIDIA' taints kernel. [ 28.202111] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23 [ 28.202115] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [AIGP] -> GSI 23 (level, low) -> IRQ 23 [ 28.202121] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 28.202237] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 28.412434] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 28.412438] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 28.412801] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 28.623912] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 29.170357] lp0: using parport0 (interrupt-driven). [ 29.217604] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k [ 31.586029] EXT3 FS on sda1, internal journal [ 33.895324] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 33.950296] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 37.036568] input: Power Button (FF) as /class/input/input4 [ 37.036756] ACPI: Power Button (FF) [PWRF] [ 37.037547] input: Power Button (CM) as /class/input/input5 [ 37.037729] ACPI: Power Button (CM) [PWRB] [ 37.068629] No dock devices found. [ 37.377841] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (version 2.00.00) [ 37.377734] powernow-k8: MP systems not supported by PSB BIOS structure [ 37.377871] powernow-k8: MP systems not supported by PSB BIOS structure [ 38.439840] NET: Registered protocol family 10 [ 38.439916] lo: Disabled Privacy Extensions [ 39.093247] ppdev: user-space parallel port driver [ 39.177669] audit(1194913464.147:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5351 profile="/usr/sbin/cupsd" [ 40.921023] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 41.008568] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 41.021712] NFSD: starting 90-second grace period [ 43.962434] Failure registering capabilities with primary security module. [ 44.100460] Bluetooth: Core ver 2.11 [ 44.100504] NET: Registered protocol family 31 [ 44.100506] Bluetooth: HCI device and connection manager initialized [ 44.100510] Bluetooth: HCI socket layer initialized [ 44.113850] Bluetooth: L2CAP ver 2.8 [ 44.113853] Bluetooth: L2CAP socket layer initialized [ 44.185953] Bluetooth: RFCOMM socket layer initialized [ 44.186014] Bluetooth: RFCOMM TTY layer initialized [ 44.186016] Bluetooth: RFCOMM ver 1.8 [ 48.984499] NET: Registered protocol family 17 [ 63.376743] eth0: no IPv6 routers present [ 64.798966] UDF-fs: Partition marked readonly; forcing readonly mount [ 64.815941] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'THE_MIGHTY_BOOSH_DISC1', timestamp 2005/07/20 12:13 (1000) [33584.085681] UDP: short packet: From 72.158.105.98:54061 36155/73 to 192.168.1.84:47558 [34701.271740] UDF-fs: Partition marked readonly; forcing readonly mount [34701.296445] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'THE_MIGHTY_BOOSH_DISC1', timestamp 2005/07/20 12:13 (1000)