[ 0.000000] Linux version 2.6.24-3-generic (buildd@crested) (gcc version 4.2.3 20071223 (prerelease) (Ubuntu 4.2.2-4ubuntu3)) #1 SMP Thu Jan 3 22:50:33 UTC 2008 (Ubuntu 2.6.24-3.5-generic) [ 0.000000] Command line: root=UUID=6d57792b-e87a-471f-8ade-a2b1bc437606 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable) [ 0.000000] BIOS-e820: 000000007fe90000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 523920) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F6540 checksum 0 [ 0.000000] ACPI: RSDP 000F6540, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7FE93C0B, 0084 (r1 PTLTD XSDT 34 LTP 0) [ 0.000000] ACPI: FACP 7FE99D6E, 00F4 (r3 INTEL CALISTGA 34 ALAN 1) [ 0.000000] ACPI: DSDT 7FE959A8, 4352 (r1 LENOVO TP-61 34 INTL 20050624) [ 0.000000] ACPI: FACS 7FE9AFC0, 0040 [ 0.000000] ACPI: APIC 7FE99E62, 0068 (r1 INTEL CALISTGA 34 LOHR 5A) [ 0.000000] ACPI: HPET 7FE99ECA, 0038 (r1 INTEL CALISTGA 34 LOHR 5A) [ 0.000000] ACPI: MCFG 7FE99F02, 003C (r1 INTEL CALISTGA 34 LOHR 5A) [ 0.000000] ACPI: TCPA 7FE99F3E, 0032 (r1 Phoeni x 34 TL 0) [ 0.000000] ACPI: APIC 7FE99F70, 0068 (r1 PTLTD APIC 34 LTP 0) [ 0.000000] ACPI: BOOT 7FE99FD8, 0028 (r1 PTLTD $SBFTBL$ 34 LTP 1) [ 0.000000] ACPI: SSDT 7FE95359, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE94CC7, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE9423D, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE94197, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE93C8F, 0508 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fe90000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 523920) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fe90000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 523920 [ 0.000000] On node 0 totalpages: 523823 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1189 pages reserved [ 0.000000] DMA zone: 2754 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7106 pages used for memmap [ 0.000000] DMA32 zone: 512718 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34528 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515472 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=6d57792b-e87a-471f-8ade-a2b1bc437606 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 19.605441] Marking TSC unstable due to TSCs unsynchronized [ 19.605445] time.c: Detected 1828.747 MHz processor. [ 19.608536] Console: colour VGA+ 80x25 [ 19.608542] console [tty0] enabled [ 19.608575] Checking aperture... [ 19.608592] Calgary: detecting Calgary via BIOS EBDA area [ 19.608595] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 19.640492] Memory: 2054024k/2095680k available (2418k kernel code, 41268k reserved, 1290k data, 312k init) [ 19.640543] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 19.719230] Calibrating delay using timer specific routine.. 3662.27 BogoMIPS (lpj=7324540) [ 19.719280] Security Framework initialized [ 19.719290] SELinux: Disabled at boot. [ 19.719295] Capability LSM initialized [ 19.719679] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 19.721395] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 19.722302] Mount-cache hash table entries: 256 [ 19.722518] CPU: L1 I cache: 32K, L1 D cache: 32K [ 19.722523] CPU: L2 cache: 2048K [ 19.722527] CPU 0/0 -> Node 0 [ 19.722529] using mwait in idle threads. [ 19.722533] CPU: Physical Processor ID: 0 [ 19.722535] CPU: Processor Core ID: 0 [ 19.722546] CPU0: Thermal monitoring handled by SMI [ 19.722569] SMP alternatives: switching to UP code [ 19.723901] Early unpacking initramfs... done [ 20.411000] ACPI: Core revision 20070126 [ 20.411063] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 20.459658] Using local APIC timer interrupts. [ 20.514255] APIC timer calibration result 10390597 [ 20.514258] Detected 10.390 MHz APIC timer. [ 20.514378] SMP alternatives: switching to SMP code [ 20.515504] Booting processor 1/2 APIC 0x1 [ 20.525962] Initializing CPU#1 [ 20.606109] Calibrating delay using timer specific routine.. 3657.54 BogoMIPS (lpj=7315085) [ 20.606120] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.606123] CPU: L2 cache: 2048K [ 20.606127] CPU 1/1 -> Node 0 [ 20.606129] CPU: Physical Processor ID: 0 [ 20.606131] CPU: Processor Core ID: 1 [ 20.606141] CPU1: Thermal monitoring handled by SMI [ 20.606701] Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 02 [ 20.606736] Brought up 2 CPUs [ 20.606854] CPU0 attaching sched-domain: [ 20.606858] domain 0: span 03 [ 20.606861] groups: 01 02 [ 20.606866] domain 1: span 03 [ 20.606869] groups: 03 [ 20.606873] CPU1 attaching sched-domain: [ 20.606875] domain 0: span 03 [ 20.606878] groups: 02 01 [ 20.606882] domain 1: span 03 [ 20.606885] groups: 03 [ 20.607238] net_namespace: 120 bytes [ 20.607920] Time: 23:08:54 Date: 01/09/08 [ 20.607958] NET: Registered protocol family 16 [ 20.608296] ACPI: bus type pci registered [ 20.608425] PCI: Using configuration type 1 [ 20.610364] ACPI: EC: Look up EC in DSDT [ 20.613564] ACPI: System BIOS is requesting _OSI(Linux) [ 20.613568] ACPI: If "acpi_osi=Linux" works better, [ 20.613570] Please send dmidecode to linux-acpi@vger.kernel.org [ 20.614295] ACPI: Interpreter enabled [ 20.614299] ACPI: (supports S0 S3 S4 S5) [ 20.614324] ACPI: Using IOAPIC for interrupt routing [ 20.659065] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 20.659070] ACPI: EC: driver started in poll mode [ 20.659335] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.660269] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 20.660275] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 20.661924] PCI: Transparent bridge - 0000:00:1e.0 [ 20.662056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.662602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 20.662828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 20.663040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 20.663275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 20.672485] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 20.672649] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 20.672808] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 20.672965] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 20.673121] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 20.673285] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 20.673444] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 20.673602] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 20.673843] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.673894] pnp: PnP ACPI init [ 20.673906] ACPI: bus type pnp registered [ 20.694240] pnp: PnP ACPI: found 11 devices [ 20.694244] ACPI: ACPI bus type pnp unregistered [ 20.694601] PCI: Using ACPI for IRQ routing [ 20.694605] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.705974] NET: Registered protocol family 8 [ 20.705977] NET: Registered protocol family 20 [ 20.706034] PCI-GART: No AMD northbridge found. [ 20.706042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 20.706048] hpet0: 3 64-bit timers, 14318180 Hz [ 20.707092] ACPI: RTC can wake from S4 [ 20.709935] Time: hpet clocksource has been installed. [ 20.709954] Switched to high resolution mode on CPU 0 [ 20.710551] Switched to high resolution mode on CPU 1 [ 20.717926] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 20.717932] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 20.717937] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 20.717942] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 20.717946] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 20.717951] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 20.717956] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 20.717960] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 20.717976] system 00:06: ioport range 0x680-0x69f has been reserved [ 20.717980] system 00:06: ioport range 0x800-0x80f has been reserved [ 20.717985] system 00:06: ioport range 0x1000-0x107f has been reserved [ 20.717989] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 20.717994] system 00:06: ioport range 0x1640-0x164f has been reserved [ 20.717998] system 00:06: ioport range 0xff00-0xff7f has been reserved [ 20.718007] system 00:07: ioport range 0x6a0-0x6af has been reserved [ 20.718011] system 00:07: ioport range 0x6b0-0x6ff has been reserved [ 20.718766] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 [ 20.718872] PCI: Bridge: 0000:00:01.0 [ 20.718875] IO window: disabled. [ 20.718880] MEM window: d0000000-d1ffffff [ 20.718885] PREFETCH window: c0000000-cfffffff [ 20.718890] PCI: Bridge: 0000:00:1c.0 [ 20.718892] IO window: disabled. [ 20.718899] MEM window: disabled. [ 20.718905] PREFETCH window: disabled. [ 20.718912] PCI: Bridge: 0000:00:1c.1 [ 20.718915] IO window: disabled. [ 20.718922] MEM window: d2000000-d20fffff [ 20.718928] PREFETCH window: disabled. [ 20.718946] PCI: Bus 6, cardbus bridge: 0000:05:04.0 [ 20.718949] IO window: 00002400-000024ff [ 20.718955] IO window: 00002800-000028ff [ 20.718962] PREFETCH window: 88000000-8bffffff [ 20.718969] MEM window: 8c000000-8fffffff [ 20.718976] PCI: Bridge: 0000:00:1e.0 [ 20.718980] IO window: 2000-2fff [ 20.718987] MEM window: d2100000-d21fffff [ 20.718993] PREFETCH window: disabled. [ 20.719017] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 20.719025] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 20.719054] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 20.719063] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 20.719092] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 20.719100] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 20.719114] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [ 20.719123] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 20.719144] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 20.719162] NET: Registered protocol family 2 [ 20.753975] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 20.755110] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 20.758268] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 20.759131] TCP: Hash tables configured (established 262144 bind 65536) [ 20.759135] TCP reno registered [ 20.770031] checking if image is initramfs... it is [ 22.128234] Freeing initrd memory: 7657k freed [ 22.133431] Simple Boot Flag at 0x36 set to 0x1 [ 22.134902] audit: initializing netlink socket (disabled) [ 22.134931] audit(1199920135.484:1): initialized [ 22.138629] VFS: Disk quotas dquot_6.5.1 [ 22.138746] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 22.138964] AppArmor: Unable to register AppArmor [ 22.139094] io scheduler noop registered [ 22.139097] io scheduler anticipatory registered [ 22.139101] io scheduler deadline registered [ 22.139288] io scheduler cfq registered (default) [ 22.141219] Boot video device is 0000:01:00.0 [ 22.141457] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.141511] assign_interrupt_mode Found MSI capability [ 22.141556] Allocate Port Service[0000:00:01.0:pcie00] [ 22.141683] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.141753] assign_interrupt_mode Found MSI capability [ 22.141810] Allocate Port Service[0000:00:1c.0:pcie00] [ 22.141875] Allocate Port Service[0000:00:1c.0:pcie02] [ 22.142020] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.142091] assign_interrupt_mode Found MSI capability [ 22.142147] Allocate Port Service[0000:00:1c.1:pcie00] [ 22.142204] Allocate Port Service[0000:00:1c.1:pcie02] [ 22.186801] Real Time Clock Driver v1.12ac [ 22.187135] hpet_resources: 0xfed00000 is busy [ 22.187178] Linux agpgart interface v0.102 [ 22.187182] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.189272] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.189381] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 22.189542] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 22.213385] i8042.c: Detected active multiplexing controller, rev 1.1. [ 22.235007] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.235013] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 22.235017] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 22.235021] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 22.235025] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 22.251324] mice: PS/2 mouse device common for all mice [ 22.251390] cpuidle: using governor ladder [ 22.251394] cpuidle: using governor menu [ 22.251510] TCP cubic registered [ 22.251617] NET: Registered protocol family 1 [ 22.251824] Magic number: 8:150:150 [ 22.251871] hash matches device ttyp4 [ 22.251947] hash matches device INT0800:00 [ 22.251958] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.251969] Freeing unused kernel memory: 312k freed [ 22.265840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 23.567980] fuse init (API version 7.9) [ 23.586054] ACPI: SSDT 7FE94A09, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 23.586750] ACPI: SSDT 7FE9449C, 04E8 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 23.590400] Monitor-Mwait will be used to enter C-1 state [ 23.590405] Monitor-Mwait will be used to enter C-2 state [ 23.590409] Monitor-Mwait will be used to enter C-3 state [ 23.593577] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 23.594686] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 23.594694] ACPI: Processor [CPU0] (supports 8 throttling states) [ 23.597037] ACPI: SSDT 7FE94BFF, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 23.597375] ACPI: SSDT 7FE94984, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 23.598858] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 23.598867] ACPI: Processor [CPU1] (supports 8 throttling states) [ 23.601590] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126] [ 23.602468] ACPI: Thermal Zone [TZ00] (54 C) [ 24.073221] usbcore: registered new interface driver usbfs [ 24.073257] usbcore: registered new interface driver hub [ 24.073953] usbcore: registered new device driver usb [ 24.076667] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 24.077570] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 24.077580] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 24.077896] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 24.081809] ehci_hcd 0000:00:1d.7: debug port 1 [ 24.081818] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 24.081835] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2404000 [ 24.095921] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.096137] usb usb1: configuration #1 chosen from 1 choice [ 24.096177] hub 1-0:1.0: USB hub found [ 24.096188] hub 1-0:1.0: 8 ports detected [ 24.167374] USB Universal Host Controller Interface driver v3.0 [ 24.192800] 8139too Fast Ethernet driver 0.9.28 [ 24.199943] PCI: Enabling device 0000:05:06.0 (0000 -> 0002) [ 24.199961] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 24.199973] PCI: Setting latency timer of device 0000:05:06.0 to 64 [ 24.203408] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 24.203422] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 24.203428] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 24.203467] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 24.203506] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 [ 24.203676] usb usb2: configuration #1 chosen from 1 choice [ 24.203714] hub 2-0:1.0: USB hub found [ 24.203723] hub 2-0:1.0: 2 ports detected [ 24.253148] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[d2100800-d2100fff] Max Packet=[2048] IR/IT contexts=[4/4] [ 24.259499] SCSI subsystem initialized [ 24.272553] libata version 3.00 loaded. [ 24.308745] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 24.308764] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 24.308770] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 24.308810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 24.308850] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 24.309030] usb usb3: configuration #1 chosen from 1 choice [ 24.309069] hub 3-0:1.0: USB hub found [ 24.309078] hub 3-0:1.0: 2 ports detected [ 24.412518] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.412536] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.412542] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.412580] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 24.412618] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 24.412791] usb usb4: configuration #1 chosen from 1 choice [ 24.412831] hub 4-0:1.0: USB hub found [ 24.412839] hub 4-0:1.0: 2 ports detected [ 24.516322] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 24.516341] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 24.516347] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 24.516386] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 24.516424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 24.516593] usb usb5: configuration #1 chosen from 1 choice [ 24.516630] hub 5-0:1.0: USB hub found [ 24.516639] hub 5-0:1.0: 2 ports detected [ 24.620409] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 24.620430] PCI: Setting latency timer of device 0000:05:01.0 to 64 [ 24.622133] eth0: RealTek RTL8139 at 0xffffc200008ca000, 00:0f:b0:c9:8b:21, IRQ 21 [ 24.622138] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 24.622267] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 24.622315] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 24.622334] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 24.624847] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 24.627495] ata_piix 0000:00:1f.2: version 2.12 [ 24.627505] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 24.702888] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 24.782746] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 24.782802] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 24.783001] scsi0 : ata_piix [ 24.783102] scsi1 : ata_piix [ 24.784533] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 [ 24.784538] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 [ 24.948001] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 0084002A, max UDMA/100 [ 24.948008] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 24.963978] ata1.00: configured for UDMA/100 [ 25.283393] ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HA01, max UDMA/33 [ 25.454003] ata2.00: configured for UDMA/33 [ 25.454209] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0084 PQ: 0 ANSI: 5 [ 25.458390] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HA01 PQ: 0 ANSI: 5 [ 25.471344] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 25.471367] sd 0:0:0:0: [sda] Write Protect is off [ 25.471371] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.471400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.471477] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 25.471494] sd 0:0:0:0: [sda] Write Protect is off [ 25.471498] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.471526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.471532] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f64904048f7] [ 25.557772] sda1 sda3 sda4 [ 25.581951] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.589854] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.589888] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 25.605994] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 25.606002] Uniform CD-ROM driver Revision: 3.20 [ 25.606080] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 25.870467] Attempting manual resume [ 25.870472] swsusp: Resume From Partition 8:1 [ 25.870475] PM: Checking swsusp image. [ 25.870776] PM: Resume from disk failed. [ 25.877941] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 25.877953] swsusp: Basic memory bitmaps created [ 25.912336] swsusp: Basic memory bitmaps freed [ 25.945913] kjournald starting. Commit interval 5 seconds [ 25.945937] EXT3-fs: mounted filesystem with ordered data mode. [ 27.731543] usb 1-3: configuration #1 chosen from 1 choice [ 27.969212] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 28.103915] usb 1-4: configuration #1 chosen from 1 choice [ 28.763826] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 28.934744] usb 2-2: configuration #1 chosen from 1 choice [ 29.430654] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 29.607085] usb 4-1: configuration #1 chosen from 1 choice [ 29.845927] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 30.007382] usb 4-2: configuration #1 chosen from 1 choice [ 37.219413] intel_rng: FWH not detected [ 37.255480] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.307411] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.365028] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 37.660521] input: Power Button (FF) as /devices/virtual/input/input3 [ 37.698656] iTCO_vendor_support: vendor-support=0 [ 37.705574] ACPI: Power Button (FF) [PWRF] [ 37.705693] input: Lid Switch as /devices/virtual/input/input4 [ 37.737644] ACPI: Lid Switch [LID0] [ 37.737759] input: Power Button (CM) as /devices/virtual/input/input5 [ 37.739390] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 37.781422] ACPI: Power Button (CM) [PWRB] [ 37.817891] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000 [ 37.889127] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 37.927042] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 37.927094] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 38.212071] Yenta: CardBus bridge found at 0000:05:04.0 [17aa:2075] [ 38.212106] Yenta: Using CSCINT to route CSC interrupts to PCI [ 38.212109] Yenta: Routing CardBus interrupts to PCI [ 38.212117] Yenta TI: socket 0000:05:04.0, mfunc 0x01111c12, devctl 0x44 [ 38.297383] ACPI: AC Adapter [ACAD] (on-line) [ 38.373043] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7 [ 38.416328] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 38.416857] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8 [ 38.441121] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 38.441128] Socket status: 30000006 [ 38.441132] Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09 [ 38.441141] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 38.441145] pcmcia: parent PCI bridge Memory window: 0xd2100000 - 0xd21fffff [ 38.464246] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 38.486219] sdhci: Secure Digital Host Controller Interface driver [ 38.486225] sdhci: Copyright(c) Pierre Ossman [ 38.486282] sdhci: SDHCI controller found at 0000:05:06.1 [1180:0822] (rev 19) [ 38.486305] PCI: Enabling device 0000:05:06.1 (0000 -> 0002) [ 38.486314] ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 38.487163] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 38.487178] PCI: Setting latency timer of device 0000:05:06.1 to 64 [ 38.487271] mmc0: SDHCI at 0xd2100400 irq 23 DMA [ 38.640524] ACPI: Battery Slot [BAT1] (battery present) [ 39.006047] nvidia: module license 'NVIDIA' taints kernel. [ 39.463867] Bluetooth: Core ver 2.11 [ 39.463962] NET: Registered protocol family 31 [ 39.463965] Bluetooth: HCI device and connection manager initialized [ 39.463972] Bluetooth: HCI socket layer initialized [ 39.562538] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 39.563401] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 39.683074] Bluetooth: HCI USB driver ver 2.9 [ 39.685144] usbcore: registered new interface driver hci_usb [ 39.703194] usbcore: registered new interface driver hiddev [ 39.716573] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input9 [ 39.745963] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds [ 39.745970] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 39.766063] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-1 [ 39.766099] usbcore: registered new interface driver usbhid [ 39.766105] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 39.766332] usbcore: registered new interface driver libusual [ 39.791842] Initializing USB Mass Storage driver... [ 39.791971] scsi2 : SCSI emulation for USB Mass Storage devices [ 39.792108] usbcore: registered new interface driver usb-storage [ 39.792113] USB Mass Storage support registered. [ 39.792260] usb-storage: device found at 3 [ 39.792263] usb-storage: waiting for device to settle before scanning [ 40.504623] si3054: cannot initialize. EXT MID = 0000 [ 40.528934] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.528954] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 40.529120] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.07 Thu Dec 13 18:34:01 PST 2007 [ 40.530689] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 40.530710] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 40.531712] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 41.297784] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 41.298553] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 41.402103] udev: renamed network interface wmaster0 to eth1 [ 41.412903] Clocksource tsc unstable (delta = -182202797 ns) [ 41.466974] usb-storage: device scan complete [ 41.467526] scsi 2:0:0:0: Direct-Access Generic USB Disk 9.02 PQ: 0 ANSI: 2 [ 41.469343] sd 2:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB) [ 41.470216] sd 2:0:0:0: [sdb] Write Protect is off [ 41.470221] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 41.470225] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 41.471080] sd 2:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB) [ 41.471952] sd 2:0:0:0: [sdb] Write Protect is off [ 41.471956] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 41.471959] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 41.471966] sdb: sdb1 [ 41.883108] sd 2:0:0:0: [sdb] Attached SCSI disk [ 41.883202] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 43.358426] loop: module loaded [ 43.432112] lp: driver loaded but no devices found [ 43.701316] Adding 2096472k swap on /dev/sda1. Priority:-1 extents:1 across:2096472k [ 44.117739] EXT3 FS on sda3, internal journal [ 44.709277] kjournald starting. Commit interval 5 seconds [ 44.709658] EXT3 FS on sda4, internal journal [ 44.709669] EXT3-fs: mounted filesystem with ordered data mode. [ 46.332243] No dock devices found. [ 46.370950] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 49.752727] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 50.420540] NET: Registered protocol family 10 [ 50.420765] lo: Disabled Privacy Extensions [ 50.421495] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready [ 50.731172] ppdev: user-space parallel port driver [ 54.005206] Bluetooth: L2CAP ver 2.9 [ 54.005213] Bluetooth: L2CAP socket layer initialized [ 54.102340] Bluetooth: RFCOMM socket layer initialized [ 54.102359] Bluetooth: RFCOMM TTY layer initialized [ 54.102362] Bluetooth: RFCOMM ver 1.8 [ 58.737144] NET: Registered protocol family 17 [ 69.982690] eth0: no IPv6 routers present [ 89.965284] CPU0 attaching NULL sched-domain. [ 89.965293] CPU1 attaching NULL sched-domain. [ 89.974571] CPU0 attaching sched-domain: [ 89.974581] domain 0: span 03 [ 89.974584] groups: 01 02 [ 89.974589] domain 1: span 03 [ 89.974592] groups: 03 [ 89.974595] CPU1 attaching sched-domain: [ 89.974598] domain 0: span 03 [ 89.974601] groups: 02 01 [ 89.974605] domain 1: span 03 [ 89.974608] groups: 03 [ 7937.539816] usb 1-3: reset high speed USB device using ehci_hcd and address 3 [ 7940.438137] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK [ 7940.438150] end_request: I/O error, dev sdb, sector 28697 [11652.860222] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready [11653.295663] ACPI: PCI interrupt for device 0000:05:01.0 disabled [11653.478283] ACPI: PCI interrupt for device 0000:03:00.0 disabled [11655.338471] Syncing filesystems ... done. [11655.425481] PM: Preparing system for mem sleep [11655.425488] Freezing user space processes ... (elapsed 0.00 seconds) done. [11655.426621] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [11655.426678] PM: Entering mem sleep [11655.426681] Suspending console(s) [11655.451098] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11655.452223] sd 0:0:0:0: [sda] Stopping disk [11655.490824] ACPI handle has no context! [11655.490991] ACPI handle has no context! [11655.491019] ACPI: PCI interrupt for device 0000:05:06.1 disabled [11655.491027] ACPI handle has no context! [11655.496331] ACPI handle has no context! [11655.496960] NVRM: RmPowerManagement: 3 [11655.780662] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [11655.781282] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [11655.781512] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [11655.781557] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [11655.781602] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [11655.781646] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [11655.781809] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [11655.792183] Disabling non-boot CPUs ... [11655.792205] CPU0 attaching NULL sched-domain. [11655.792207] CPU1 attaching NULL sched-domain. [11655.905678] CPU 1 is now offline [11655.905681] SMP alternatives: switching to UP code [11655.907173] CPU0 attaching sched-domain: [11655.907176] domain 0: span 01 [11655.907178] groups: 01 [11655.907348] CPU1 is down [11655.907521] Extended CMOS year: 2000 [ 1.039979] Back to C! [ 1.040321] Extended CMOS year: 2000 [ 1.040492] Enabling non-boot CPUs ... [ 1.040592] CPU0 attaching NULL sched-domain. [ 1.050550] SMP alternatives: switching to SMP code [ 1.052383] Booting processor 1/2 APIC 0x1 [ 1.062822] Initializing CPU#1 [ 1.142280] Calibrating delay using timer specific routine.. 3657.64 BogoMIPS (lpj=7315291) [ 1.142291] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.142294] CPU: L2 cache: 2048K [ 1.142298] CPU 1/1 -> Node 0 [ 1.142300] CPU: Physical Processor ID: 0 [ 1.142302] CPU: Processor Core ID: 1 [ 1.142865] Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 02 [ 1.142979] CPU0 attaching sched-domain: [ 1.142983] domain 0: span 03 [ 1.142986] groups: 01 02 [ 1.142990] domain 1: span 03 [ 1.142993] groups: 03 [ 1.142996] CPU1 attaching sched-domain: [ 1.142998] domain 0: span 03 [ 1.143001] groups: 02 01 [ 1.143004] domain 1: span 03 [ 1.143006] groups: 03 [ 1.143608] CPU1 is up [ 1.146897] Switched to high resolution mode on CPU 1 [ 1.260577] PM: Writing back config space on device 0000:00:01.0 at offset f (was 10010a, writing 18010a) [ 1.260592] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0) [ 1.260602] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507) [ 1.260633] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.274111] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [ 1.274143] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 1.274153] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 1.274196] PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing 20200) [ 1.274211] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) [ 1.274260] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.274298] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) [ 1.274347] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.274359] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 1.274367] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.274429] usb usb2: root hub lost power or was reset [ 1.274466] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 1.274474] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.274533] usb usb3: root hub lost power or was reset [ 1.274557] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.274564] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.274623] usb usb4: root hub lost power or was reset [ 1.274656] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 1.274663] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 1.274723] usb usb5: root hub lost power or was reset [ 1.290051] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 1.290060] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.290162] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20050500, writing 20090500) [ 1.290177] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100007) [ 1.290204] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.306050] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005) [ 1.306074] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 1.306082] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.308559] NVRM: RmPowerManagement: 4 [ 1.930531] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 1.930534] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 1.930755] PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 10a) [ 1.930822] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 0, writing d2000000) [ 1.930835] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 10) [ 1.930853] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100102) [ 1.930940] PM: Writing back config space on device 0000:05:01.0 at offset 3 (was 0, writing 4000) [ 1.930948] PM: Writing back config space on device 0000:05:01.0 at offset 1 (was 2900007, writing 2900003) [ 1.930975] PM: Writing back config space on device 0000:05:04.0 at offset f (was 74001ff, writing 5c001ff) [ 1.930981] PM: Writing back config space on device 0000:05:04.0 at offset e (was 0, writing 28fc) [ 1.930986] PM: Writing back config space on device 0000:05:04.0 at offset d (was 0, writing 2800) [ 1.930992] PM: Writing back config space on device 0000:05:04.0 at offset c (was 0, writing 24fc) [ 1.930998] PM: Writing back config space on device 0000:05:04.0 at offset b (was 0, writing 2400) [ 1.931004] PM: Writing back config space on device 0000:05:04.0 at offset a (was 0, writing 8ffff000) [ 1.931009] PM: Writing back config space on device 0000:05:04.0 at offset 9 (was 0, writing 8c000000) [ 1.931015] PM: Writing back config space on device 0000:05:04.0 at offset 8 (was 0, writing 8bfff000) [ 1.931020] PM: Writing back config space on device 0000:05:04.0 at offset 7 (was 0, writing 88000000) [ 1.931026] PM: Writing back config space on device 0000:05:04.0 at offset 6 (was 20000000, writing b0090605) [ 1.931034] PM: Writing back config space on device 0000:05:04.0 at offset 4 (was 0, writing d2102000) [ 1.931039] PM: Writing back config space on device 0000:05:04.0 at offset 3 (was 24008, writing 2a820) [ 1.944957] PM: Writing back config space on device 0000:05:06.0 at offset 3 (was 800000, writing 804000) [ 1.944964] PM: Writing back config space on device 0000:05:06.0 at offset 1 (was 2100000, writing 2100006) [ 1.997990] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[d2100800-d2100fff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.016836] PM: Writing back config space on device 0000:05:06.1 at offset 3 (was 800000, writing 804000) [ 2.016843] PM: Writing back config space on device 0000:05:06.1 at offset 1 (was 2100000, writing 2100006) [ 2.016864] ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 2.016893] PM: Writing back config space on device 0000:05:06.2 at offset b (was 207817aa, writing 207917aa) [ 2.016910] PM: Writing back config space on device 0000:05:06.2 at offset 2 (was 8800001, writing 880000a) [ 2.016916] PM: Writing back config space on device 0000:05:06.2 at offset 0 (was 8431180, writing 5921180) [ 2.016942] PM: Writing back config space on device 0000:05:06.3 at offset b (was 207917aa, writing 207a17aa) [ 2.016959] PM: Writing back config space on device 0000:05:06.3 at offset 2 (was 880000a, writing 8800005) [ 2.016966] PM: Writing back config space on device 0000:05:06.3 at offset 0 (was 5921180, writing 8521180) [ 2.020640] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. [ 2.020642] i8042: failed to resume active multiplexor, mouse won't work. [ 2.053538] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 2.101103] ata2.00: configured for UDMA/33 [ 2.252564] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 2.451675] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 2.612124] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 2.612129] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 2.650167] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 2.664229] ata1.00: configured for UDMA/100 [ 2.664276] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 2.664295] sd 0:0:0:0: [sda] Write Protect is off [ 2.664299] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.664327] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.847947] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 3.276022] sd 0:0:0:0: [sda] Starting disk [ 3.276594] PM: Finishing wakeup. [ 3.276598] Restarting tasks ... <4>atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. [ 3.285957] done. [ 3.367935] 8139too Fast Ethernet driver 0.9.28 [ 3.368011] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 3.370400] eth0: RealTek RTL8139 at 0xffffc200008ca000, 00:0f:b0:c9:8b:21, IRQ 21 [ 3.370406] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 3.394700] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 3.471669] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. [ 3.480823] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds [ 3.480831] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 3.480986] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 3.481008] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 3.481517] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 3.513213] usb 1-3: USB disconnect, address 3 [ 3.628972] usb 1-3: new high speed USB device using ehci_hcd and address 8 [ 3.671790] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. [ 3.776615] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 3.777651] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 3.780229] udev: renamed network interface wmaster0 to eth1 [ 3.874451] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. [ 6.012926] si3054: cannot initialize. EXT MID = 0000 [ 6.172336] input: Power Button (FF) as /devices/virtual/input/input10 [ 6.220591] ACPI: Power Button (FF) [PWRF] [ 6.220657] input: Lid Switch as /devices/virtual/input/input11 [ 6.252621] ACPI: Lid Switch [LID0] [ 6.252679] input: Power Button (CM) as /devices/virtual/input/input12 [ 6.300497] ACPI: Power Button (CM) [PWRB] [ 6.346620] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126] [ 6.349143] ACPI: Thermal Zone [TZ00] (52 C) [ 6.439978] ACPI: AC Adapter [ACAD] (on-line) [ 6.694574] printk: 7 messages suppressed. [ 6.694583] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. [ 6.791899] ACPI: Battery Slot [BAT1] (battery present) [ 6.993052] usb 1-3: configuration #1 chosen from 1 choice [ 6.993270] scsi3 : SCSI emulation for USB Mass Storage devices [ 6.993482] usb 1-4: USB disconnect, address 4 [ 6.993730] usb-storage: device found at 8 [ 6.993733] usb-storage: waiting for device to settle before scanning [ 7.107083] usb 1-4: new high speed USB device using ehci_hcd and address 9 [ 7.140894] usb 1-4: configuration #1 chosen from 1 choice [ 7.397391] usb 2-2: USB disconnect, address 2 [ 7.541295] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 7.553427] usb 2-2: configuration #1 chosen from 1 choice [ 7.563788] usb 4-1: USB disconnect, address 2 [ 7.848738] usb 4-1: new low speed USB device using uhci_hcd and address 4 [ 7.994138] usb 4-1: configuration #1 chosen from 1 choice [ 8.010408] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input13 [ 8.061760] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-1 [ 8.061848] usb 4-2: USB disconnect, address 3 [ 8.187825] usb 4-2: new full speed USB device using uhci_hcd and address 5 [ 8.255508] usb 4-2: configuration #1 chosen from 1 choice [ 8.583702] usb-storage: device scan complete [ 8.584584] scsi 3:0:0:0: Direct-Access Generic USB Disk 9.02 PQ: 0 ANSI: 2 [ 8.587533] sd 3:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB) [ 8.588629] sd 3:0:0:0: [sdb] Write Protect is off [ 8.588636] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 8.588639] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 8.589870] sd 3:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB) [ 8.590748] sd 3:0:0:0: [sdb] Write Protect is off [ 8.590753] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 8.590756] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 8.590763] sdb: sdb1 [ 8.611411] sd 3:0:0:0: [sdb] Attached SCSI disk [ 8.611491] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 11.869815] eth0: no IPv6 routers present