[ 0.000000] Linux version 2.6.24-2-generic (buildd@crested) (gcc version 4.2.3 20071210 (prerelease) (Ubuntu 4.2.2-4ubuntu1)) #1 SMP Thu Dec 20 17:58:55 GMT 2007 (Ubuntu 2.6.24-2.4-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable) [ 0.000000] BIOS-e820: 000000007fe90000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 523920) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F6540 checksum 0 [ 0.000000] ACPI: RSDP 000F6540, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7FE93C0B, 0084 (r1 PTLTD XSDT 34 LTP 0) [ 0.000000] ACPI: FACP 7FE99D6E, 00F4 (r3 INTEL CALISTGA 34 ALAN 1) [ 0.000000] ACPI: DSDT 7FE959A8, 4352 (r1 LENOVO TP-61 34 INTL 20050624) [ 0.000000] ACPI: FACS 7FE9AFC0, 0040 [ 0.000000] ACPI: APIC 7FE99E62, 0068 (r1 INTEL CALISTGA 34 LOHR 5A) [ 0.000000] ACPI: HPET 7FE99ECA, 0038 (r1 INTEL CALISTGA 34 LOHR 5A) [ 0.000000] ACPI: MCFG 7FE99F02, 003C (r1 INTEL CALISTGA 34 LOHR 5A) [ 0.000000] ACPI: TCPA 7FE99F3E, 0032 (r1 Phoeni x 34 TL 0) [ 0.000000] ACPI: APIC 7FE99F70, 0068 (r1 PTLTD APIC 34 LTP 0) [ 0.000000] ACPI: BOOT 7FE99FD8, 0028 (r1 PTLTD $SBFTBL$ 34 LTP 1) [ 0.000000] ACPI: SSDT 7FE95359, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE94CC7, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE9423D, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE94197, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE93C8F, 0508 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fe90000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 523920) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fe90000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 523920 [ 0.000000] On node 0 totalpages: 523823 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1187 pages reserved [ 0.000000] DMA zone: 2756 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7106 pages used for memmap [ 0.000000] DMA32 zone: 512718 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34528 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515474 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 41.464325] Marking TSC unstable due to TSCs unsynchronized [ 41.464329] time.c: Detected 1828.748 MHz processor. [ 41.467306] Console: colour VGA+ 80x25 [ 41.467311] console [tty0] enabled [ 41.467345] Checking aperture... [ 41.467361] Calgary: detecting Calgary via BIOS EBDA area [ 41.467364] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 41.499188] Memory: 2053760k/2095680k available (2412k kernel code, 41532k reserved, 1287k data, 312k init) [ 41.499237] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 41.578115] Calibrating delay using timer specific routine.. 3662.33 BogoMIPS (lpj=7324666) [ 41.578165] Security Framework initialized [ 41.578174] SELinux: Disabled at boot. [ 41.578179] Capability LSM initialized [ 41.578567] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 41.580289] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 41.581195] Mount-cache hash table entries: 256 [ 41.581408] CPU: L1 I cache: 32K, L1 D cache: 32K [ 41.581412] CPU: L2 cache: 2048K [ 41.581416] CPU 0/0 -> Node 0 [ 41.581419] using mwait in idle threads. [ 41.581422] CPU: Physical Processor ID: 0 [ 41.581425] CPU: Processor Core ID: 0 [ 41.581436] CPU0: Thermal monitoring handled by SMI [ 41.581459] SMP alternatives: switching to UP code [ 41.582794] Early unpacking initramfs... done [ 42.288496] ACPI: Core revision 20070126 [ 42.288559] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 42.339339] Using local APIC timer interrupts. [ 42.393936] APIC timer calibration result 10390611 [ 42.393939] Detected 10.390 MHz APIC timer. [ 42.394064] SMP alternatives: switching to SMP code [ 42.395198] Booting processor 1/2 APIC 0x1 [ 42.405658] Initializing CPU#1 [ 42.485790] Calibrating delay using timer specific routine.. 3657.55 BogoMIPS (lpj=7315101) [ 42.485801] CPU: L1 I cache: 32K, L1 D cache: 32K [ 42.485804] CPU: L2 cache: 2048K [ 42.485808] CPU 1/1 -> Node 0 [ 42.485810] CPU: Physical Processor ID: 0 [ 42.485812] CPU: Processor Core ID: 1 [ 42.485822] CPU1: Thermal monitoring handled by SMI [ 42.486381] Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 02 [ 42.486431] Brought up 2 CPUs [ 42.486550] CPU0 attaching sched-domain: [ 42.486554] domain 0: span 03 [ 42.486557] groups: 01 02 [ 42.486562] domain 1: span 03 [ 42.486565] groups: 03 [ 42.486568] CPU1 attaching sched-domain: [ 42.486571] domain 0: span 03 [ 42.486573] groups: 02 01 [ 42.486577] domain 1: span 03 [ 42.486580] groups: 03 [ 42.486930] net_namespace: 120 bytes [ 42.487609] Time: 6:28:40 Date: 12/28/07 [ 42.487647] NET: Registered protocol family 16 [ 42.487976] ACPI: bus type pci registered [ 42.488105] PCI: Using configuration type 1 [ 42.490047] ACPI: EC: Look up EC in DSDT [ 42.493263] ACPI: System BIOS is requesting _OSI(Linux) [ 42.493267] ACPI: If "acpi_osi=Linux" works better, [ 42.493269] Please send dmidecode to linux-acpi@vger.kernel.org [ 42.493994] ACPI: Interpreter enabled [ 42.493998] ACPI: (supports S0 S3 S4 S5) [ 42.494023] ACPI: Using IOAPIC for interrupt routing [ 42.538749] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 42.538754] ACPI: EC: driver started in poll mode [ 42.539019] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 42.539951] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 42.539957] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 42.541736] PCI: Transparent bridge - 0000:00:1e.0 [ 42.541919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 42.542466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 42.542694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 42.542907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 42.543143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 42.552419] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 42.552584] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 42.552743] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 42.552900] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 42.553056] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 42.553211] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 42.553367] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 42.553524] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 42.553766] Linux Plug and Play Support v0.97 (c) Adam Belay [ 42.553818] pnp: PnP ACPI init [ 42.553830] ACPI: bus type pnp registered [ 42.573921] pnp: PnP ACPI: found 11 devices [ 42.573925] ACPI: ACPI bus type pnp unregistered [ 42.574286] PCI: Using ACPI for IRQ routing [ 42.574290] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 42.585655] NET: Registered protocol family 8 [ 42.585659] NET: Registered protocol family 20 [ 42.585716] PCI-GART: No AMD northbridge found. [ 42.585724] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 42.585731] hpet0: 3 64-bit timers, 14318180 Hz [ 42.589616] Time: hpet clocksource has been installed. [ 42.589634] Switched to high resolution mode on CPU 0 [ 42.590231] Switched to high resolution mode on CPU 1 [ 42.597607] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 42.597613] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 42.597618] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 42.597623] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 42.597627] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 42.597632] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 42.597637] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 42.597641] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 42.597654] system 00:06: ioport range 0x680-0x69f has been reserved [ 42.597658] system 00:06: ioport range 0x800-0x80f has been reserved [ 42.597663] system 00:06: ioport range 0x1000-0x107f has been reserved [ 42.597667] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 42.597672] system 00:06: ioport range 0x1640-0x164f has been reserved [ 42.597676] system 00:06: ioport range 0xff00-0xff7f has been reserved [ 42.597685] system 00:07: ioport range 0x6a0-0x6af has been reserved [ 42.597689] system 00:07: ioport range 0x6b0-0x6ff has been reserved [ 42.598439] PCI: Failed to allocate mem resource #6:20000@d2000000 for 0000:01:00.0 [ 42.598542] PCI: Bridge: 0000:00:01.0 [ 42.598544] IO window: disabled. [ 42.598550] MEM window: d0000000-d1ffffff [ 42.598554] PREFETCH window: c0000000-cfffffff [ 42.598559] PCI: Bridge: 0000:00:1c.0 [ 42.598562] IO window: disabled. [ 42.598568] MEM window: disabled. [ 42.598574] PREFETCH window: disabled. [ 42.598581] PCI: Bridge: 0000:00:1c.1 [ 42.598583] IO window: disabled. [ 42.598591] MEM window: d2000000-d20fffff [ 42.598596] PREFETCH window: disabled. [ 42.598614] PCI: Bus 6, cardbus bridge: 0000:05:04.0 [ 42.598617] IO window: 00002400-000024ff [ 42.598624] IO window: 00002800-000028ff [ 42.598631] PREFETCH window: 88000000-8bffffff [ 42.598637] MEM window: 8c000000-8fffffff [ 42.598644] PCI: Bridge: 0000:00:1e.0 [ 42.598648] IO window: 2000-2fff [ 42.598655] MEM window: d2100000-d21fffff [ 42.598661] PREFETCH window: disabled. [ 42.598685] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 42.598692] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 42.598722] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 42.598731] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 42.598760] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 42.598768] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 42.598782] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [ 42.598790] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 42.598811] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 42.598829] NET: Registered protocol family 2 [ 42.633656] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 42.634790] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 42.637995] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 42.638862] TCP: Hash tables configured (established 262144 bind 65536) [ 42.638866] TCP reno registered [ 42.649709] checking if image is initramfs... it is [ 44.043945] Freeing initrd memory: 7931k freed [ 44.049354] Simple Boot Flag at 0x36 set to 0x1 [ 44.050821] audit: initializing netlink socket (disabled) [ 44.050848] audit(1198823321.536:1): initialized [ 44.054535] VFS: Disk quotas dquot_6.5.1 [ 44.054664] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 44.054884] AppArmor: Unable to register AppArmor [ 44.055013] io scheduler noop registered [ 44.055017] io scheduler anticipatory registered [ 44.055020] io scheduler deadline registered [ 44.055211] io scheduler cfq registered (default) [ 44.057157] Boot video device is 0000:01:00.0 [ 44.057400] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 44.057455] assign_interrupt_mode Found MSI capability [ 44.057499] Allocate Port Service[0000:00:01.0:pcie00] [ 44.057626] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 44.057696] assign_interrupt_mode Found MSI capability [ 44.057752] Allocate Port Service[0000:00:1c.0:pcie00] [ 44.057811] Allocate Port Service[0000:00:1c.0:pcie02] [ 44.057957] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 44.058027] assign_interrupt_mode Found MSI capability [ 44.058083] Allocate Port Service[0000:00:1c.1:pcie00] [ 44.058140] Allocate Port Service[0000:00:1c.1:pcie02] [ 44.102581] Real Time Clock Driver v1.12ac [ 44.102918] hpet_resources: 0xfed00000 is busy [ 44.102963] Linux agpgart interface v0.102 [ 44.102967] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 44.105012] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 44.105124] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 44.105282] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 44.129559] i8042.c: Detected active multiplexing controller, rev 1.1. [ 44.150397] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 44.150404] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 44.150408] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 44.150412] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 44.150416] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 44.158961] mice: PS/2 mouse device common for all mice [ 44.159032] cpuidle: using governor ladder [ 44.159036] cpuidle: using governor menu [ 44.159149] TCP cubic registered [ 44.159259] NET: Registered protocol family 1 [ 44.159480] Magic number: 3:701:469 [ 44.159605] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 44.159616] Freeing unused kernel memory: 312k freed [ 44.172610] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 45.496511] fuse init (API version 7.9) [ 45.516369] ACPI: SSDT 7FE94A09, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 45.517068] ACPI: SSDT 7FE9449C, 04E8 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 45.522406] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 45.523599] Monitor-Mwait will be used to enter C-1 state [ 45.523604] Monitor-Mwait will be used to enter C-2 state [ 45.523608] Monitor-Mwait will be used to enter C-3 state [ 45.523808] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 45.523816] ACPI: Processor [CPU0] (supports 8 throttling states) [ 45.526221] ACPI: SSDT 7FE94BFF, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 45.526574] ACPI: SSDT 7FE94984, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 45.528058] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 45.528066] ACPI: Processor [CPU1] (supports 8 throttling states) [ 45.530452] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126] [ 45.531025] ACPI: Thermal Zone [TZ00] (52 C) [ 45.992764] usbcore: registered new interface driver usbfs [ 45.992797] usbcore: registered new interface driver hub [ 45.992842] usbcore: registered new device driver usb [ 45.994663] USB Universal Host Controller Interface driver v3.0 [ 45.994738] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 45.994754] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 45.994760] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 45.995049] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 45.995093] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 [ 45.995312] usb usb1: configuration #1 chosen from 1 choice [ 45.995350] hub 1-0:1.0: USB hub found [ 45.995359] hub 1-0:1.0: 2 ports detected [ 46.087406] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 46.099789] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 46.099807] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 46.099813] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 46.099850] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 46.099889] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 46.100062] usb usb2: configuration #1 chosen from 1 choice [ 46.100098] hub 2-0:1.0: USB hub found [ 46.100107] hub 2-0:1.0: 2 ports detected [ 46.139946] SCSI subsystem initialized [ 46.203006] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 46.203023] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 46.203030] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 46.203066] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 46.203106] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 46.203274] usb usb3: configuration #1 chosen from 1 choice [ 46.203312] hub 3-0:1.0: USB hub found [ 46.203320] hub 3-0:1.0: 2 ports detected [ 46.294008] libata version 3.00 loaded. [ 46.306837] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 46.306856] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 46.306862] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 46.306902] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 46.306941] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 46.307113] usb usb4: configuration #1 chosen from 1 choice [ 46.307150] hub 4-0:1.0: USB hub found [ 46.307159] hub 4-0:1.0: 2 ports detected [ 46.339196] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 46.410849] 8139cp 0000:05:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 46.410857] 8139cp 0000:05:01.0: Try the "8139too" driver instead. [ 46.413373] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 46.414254] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 46.414263] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 46.414327] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 46.418241] ehci_hcd 0000:00:1d.7: debug port 1 [ 46.418249] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 46.418260] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2404000 [ 46.424541] 8139too Fast Ethernet driver 0.9.28 [ 46.466428] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 46.466607] usb usb5: configuration #1 chosen from 1 choice [ 46.466648] hub 5-0:1.0: USB hub found [ 46.466659] hub 5-0:1.0: 8 ports detected [ 46.570669] PCI: Enabling device 0000:05:06.0 (0000 -> 0002) [ 46.570686] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 46.570698] PCI: Setting latency timer of device 0000:05:06.0 to 64 [ 46.623878] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[d2100800-d2100fff] Max Packet=[2048] IR/IT contexts=[4/4] [ 46.628093] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 46.628111] PCI: Setting latency timer of device 0000:05:01.0 to 64 [ 46.629757] eth0: RealTek RTL8139 at 0xffffc200008cc000, 00:0f:b0:c9:8b:21, IRQ 21 [ 46.629761] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 46.631835] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 46.631883] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 46.631901] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 46.636619] ata_piix 0000:00:1f.2: version 2.12 [ 46.636629] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 46.790866] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 46.790920] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 46.791114] scsi0 : ata_piix [ 46.792157] scsi1 : ata_piix [ 46.792340] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 [ 46.792344] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 [ 46.865711] usb 1-1: device not accepting address 2, error -71 [ 46.955139] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 0084002A, max UDMA/100 [ 46.955145] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 46.971093] ata1.00: configured for UDMA/100 [ 47.015878] ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HA01, max UDMA/33 [ 47.029364] ata2.00: configured for UDMA/33 [ 47.029538] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0084 PQ: 0 ANSI: 5 [ 47.032702] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HA01 PQ: 0 ANSI: 5 [ 47.042121] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 47.042144] sd 0:0:0:0: [sda] Write Protect is off [ 47.042148] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 47.042176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.042248] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 47.042264] sd 0:0:0:0: [sda] Write Protect is off [ 47.042268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 47.042295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.042301] sda:<4>Clocksource tsc unstable (delta = -422777591 ns) [ 47.294872] usb 5-3: new high speed USB device using ehci_hcd and address 3 [ 47.379679] sda1 sda3 sda4 [ 47.437163] sd 0:0:0:0: [sda] Attached SCSI disk [ 47.442213] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 47.442219] Uniform CD-ROM driver Revision: 3.20 [ 47.442296] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 47.443294] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 47.443323] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 47.462695] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f64904048f7] [ 47.756761] kjournald starting. Commit interval 5 seconds [ 47.756786] EXT3-fs: mounted filesystem with ordered data mode. [ 47.789256] kjournald starting. Commit interval 5 seconds [ 47.789280] EXT3-fs: mounted filesystem with ordered data mode. [ 48.303855] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 48.338343] ISO 9660 Extensions: RRIP_1991A [ 48.692674] Registering unionfs 1.4 [ 48.692679] unionfs: debugging is not enabled [ 48.709299] loop: module loaded [ 49.040335] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 59.261938] usb 5-3: device not accepting address 3, error -110 [ 59.373754] usb 5-3: new high speed USB device using ehci_hcd and address 4 [ 62.406199] usb 5-3: configuration #1 chosen from 1 choice [ 62.644039] usb 5-4: new high speed USB device using ehci_hcd and address 5 [ 62.778705] usb 5-4: configuration #1 chosen from 1 choice [ 63.015537] usbcore: registered new interface driver libusual [ 63.021469] Initializing USB Mass Storage driver... [ 63.254989] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 63.432757] usb 1-1: configuration #1 chosen from 1 choice [ 63.675230] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 63.841200] usb 3-2: configuration #1 chosen from 1 choice [ 63.857928] scsi2 : SCSI emulation for USB Mass Storage devices [ 63.862024] usb-storage: device found at 4 [ 63.862029] usb-storage: waiting for device to settle before scanning [ 63.862070] usbcore: registered new interface driver hiddev [ 63.862081] usbcore: registered new interface driver usb-storage [ 63.862088] USB Mass Storage support registered. [ 63.875207] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input2 [ 63.897891] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1 [ 63.897924] usbcore: registered new interface driver usbhid [ 63.897930] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 68.858180] usb-storage: device scan complete [ 68.858961] scsi 2:0:0:0: Direct-Access Generic USB Disk 9.02 PQ: 0 ANSI: 2 [ 68.860852] sd 2:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB) [ 68.865733] sd 2:0:0:0: [sdb] Write Protect is off [ 68.865740] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 68.865743] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 68.866616] sd 2:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB) [ 68.867493] sd 2:0:0:0: [sdb] Write Protect is off [ 68.867498] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 68.867502] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 68.867508] sdb:<6>sd 2:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] [ 70.117928] sd 2:0:0:0: [sdb] Device not ready: <> ASC=0xff ASCQ=0xffASC=0xff <> ASCQ=0xff [ 70.117941] end_request: I/O error, dev sdb, sector 0 [ 70.117947] Buffer I/O error on device sdb, logical block 0 [ 100.174424] usb 5-3: reset high speed USB device using ehci_hcd and address 4 [ 103.218809] ldm_validate_partition_table(): Disk read failed. [ 103.218825] Dev sdb: unable to read RDB block 0 [ 103.219410] unable to read partition table [ 103.219510] sd 2:0:0:0: [sdb] Attached SCSI disk [ 103.219573] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 126.214617] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 126.326397] iTCO_vendor_support: vendor-support=0 [ 126.527837] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 126.782586] input: Power Button (FF) as /devices/virtual/input/input4 [ 126.804521] ACPI: Power Button (FF) [PWRF] [ 126.804633] input: Lid Switch as /devices/virtual/input/input5 [ 126.804738] ACPI: Lid Switch [LID0] [ 126.804812] input: Power Button (CM) as /devices/virtual/input/input6 [ 126.836449] ACPI: Power Button (CM) [PWRB] [ 126.885651] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 127.123566] ricoh-mmc: Ricoh MMC Controller disabling driver [ 127.123572] ricoh-mmc: Copyright(c) Philip Langdale [ 127.123636] ricoh-mmc: Ricoh MMC controller found at 0000:05:06.2 [1180:0843] (rev 1) [ 127.123652] ricoh-mmc: Controller is now disabled. [ 127.744928] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000 [ 127.896876] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 127.983381] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 127.983527] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 127.983578] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 128.680200] intel_rng: FWH not detected [ 128.774943] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8 [ 128.822096] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 128.822622] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 128.869962] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 129.037757] sdhci: Secure Digital Host Controller Interface driver [ 129.037762] sdhci: Copyright(c) Pierre Ossman [ 129.037814] sdhci: SDHCI controller found at 0000:05:06.1 [1180:0822] (rev 19) [ 129.037836] PCI: Enabling device 0000:05:06.1 (0000 -> 0002) [ 129.037845] ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 129.038723] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 129.038738] PCI: Setting latency timer of device 0000:05:06.1 to 64 [ 129.038834] mmc0: SDHCI at 0xd2100400 irq 23 DMA [ 129.068635] Yenta: CardBus bridge found at 0000:05:04.0 [17aa:2075] [ 129.068670] Yenta: Using CSCINT to route CSC interrupts to PCI [ 129.068673] Yenta: Routing CardBus interrupts to PCI [ 129.068680] Yenta TI: socket 0000:05:04.0, mfunc 0x01111c12, devctl 0x44 [ 129.069255] ACPI: Battery Slot [BAT1] (battery present) [ 129.134290] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds [ 129.134297] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 129.158759] ACPI: AC Adapter [ACAD] (on-line) [ 129.302066] Yenta: ISA IRQ mask 0x0ca8, PCI irq 16 [ 129.302073] Socket status: 30000006 [ 129.302077] Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09 [ 129.302087] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 129.302091] pcmcia: parent PCI bridge Memory window: 0xd2100000 - 0xd21fffff [ 129.302591] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 129.302609] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 129.303520] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 129.877897] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 129.878789] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 130.829465] si3054: cannot initialize. EXT MID = 0000 [ 130.896842] iwl3945: Radio Frequency Kill Switch is On: [ 130.896847] Kill switch must be turned off for wireless networking to work. [ 130.901378] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 130.911512] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 130.931640] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 130.959359] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 130.979514] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 132.270397] Adding 2096472k swap on /dev/sda1. Priority:-1 extents:1 across:2096472k [ 133.773788] No dock devices found. [ 134.056332] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 137.969450] avahi-daemon[8045]: segfault at 0 rip 40704a rsp 7fff7bd0ff10 error 4 [ 139.497789] lp: driver loaded but no devices found [ 139.584206] ppdev: user-space parallel port driver [ 146.481507] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 146.883154] Bluetooth: Core ver 2.11 [ 146.883244] NET: Registered protocol family 31 [ 146.883247] Bluetooth: HCI device and connection manager initialized [ 146.883253] Bluetooth: HCI socket layer initialized [ 146.958544] Bluetooth: L2CAP ver 2.9 [ 146.958551] Bluetooth: L2CAP socket layer initialized [ 147.139434] Bluetooth: RFCOMM socket layer initialized [ 147.139453] Bluetooth: RFCOMM TTY layer initialized [ 147.139456] Bluetooth: RFCOMM ver 1.8 [ 149.922308] NET: Registered protocol family 17 [ 154.232058] NET: Registered protocol family 10 [ 154.232394] lo: Disabled Privacy Extensions [ 162.410045] eth0: no IPv6 routers present [ 188.721818] CPU0 attaching NULL sched-domain. [ 188.721825] CPU1 attaching NULL sched-domain. [ 188.730143] CPU0 attaching sched-domain: [ 188.730149] domain 0: span 03 [ 188.730152] groups: 01 02 [ 188.730157] domain 1: span 03 [ 188.730160] groups: 03 [ 188.730164] CPU1 attaching sched-domain: [ 188.730166] domain 0: span 03 [ 188.730169] groups: 02 01 [ 188.730173] domain 1: span 03 [ 188.730176] groups: 03