root@ubuntu:/home/ubuntu# dmesg [ 0.000000] Linux version 2.6.20-8-generic (root@vernadsky) (gcc version 4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 05:18:42 UTC 2007 (Ubuntu 2.6.20-8.14-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003efe7000 end: 000000003f0e7000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003f0e7000 size: 0000000000201000 end: 000000003f2e8000 type: 4 [ 0.000000] copy_e820_map() start: 000000003f2e8000 size: 0000000000bd6000 end: 000000003febe000 type: 3 [ 0.000000] copy_e820_map() start: 000000003febe000 size: 0000000000031000 end: 000000003feef000 type: 4 [ 0.000000] copy_e820_map() start: 000000003feef000 size: 0000000000011000 end: 000000003ff00000 type: 3 [ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end: 0000000040000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000004000 end: 00000000fed20000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffe00000 size: 0000000000200000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0e7000 (usable) [ 0.000000] BIOS-e820: 000000003f0e7000 - 000000003f2e8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f2e8000 - 000000003febe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 112MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 258279) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 258279 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 258279 [ 0.000000] On node 0 totalpages: 258279 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 225 pages used for memmap [ 0.000000] HighMem zone: 28678 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v002 APPLE ) @ 0x000fe020 [ 0.000000] ACPI: XSDT (v001 APPLE Apple00 0x000000a5 0x01000013) @ 0x3fefd1c0 [ 0.000000] ACPI: FADT (v003 APPLE Apple00 0x000000a5 Loki 0x0000005f) @ 0x3fefb000 [ 0.000000] ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fefa000 [ 0.000000] ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef9000 [ 0.000000] ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef8000 [ 0.000000] ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef7000 [ 0.000000] ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef6000 [ 0.000000] ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef5000 [ 0.000000] ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x3feef000 [ 0.000000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050309) @ 0x3febd000 [ 0.000000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050309) @ 0x3febc000 [ 0.000000] ACPI: DSDT (v001 APPLE MacBookP 0x00020002 INTL 0x20050309) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] Detected 2161.410 MHz processor. [ 37.335124] Built 1 zonelists. Total pages: 256262 [ 37.335128] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 37.335284] mapped APIC to ffffd000 (fee00000) [ 37.335286] mapped IOAPIC to ffffc000 (fec00000) [ 37.335288] Enabling fast FPU save and restore... done. [ 37.335290] Enabling unmasked SIMD FPU exception support... done. [ 37.335297] Initializing CPU#0 [ 37.335369] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 37.337079] Console: colour VGA+ 80x25 [ 37.337513] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 37.337845] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 37.358042] Memory: 1013228k/1033116k available (1979k kernel code, 19200k reserved, 882k data, 324k init, 115612k highmem) [ 37.358049] virtual kernel memory layout: [ 37.358050] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 37.358051] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 37.358051] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 37.358052] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 37.358053] .init : 0xc03d1000 - 0xc0422000 ( 324 kB) [ 37.358054] .data : 0xc02eecb4 - 0xc03cb6d4 ( 882 kB) [ 37.358055] .text : 0xc0100000 - 0xc02eecb4 (1979 kB) [ 37.358057] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 37.358204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 37.358208] hpet0: 3 64-bit timers, 14318180 Hz [ 37.359213] Using HPET for base-timer [ 37.438073] Calibrating delay using timer specific routine.. 4327.29 BogoMIPS (lpj=8654582) [ 37.438104] Security Framework v1.0.0 initialized [ 37.438108] SELinux: Disabled at boot. [ 37.438119] Mount-cache hash table entries: 512 [ 37.438217] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 37.438223] monitor/mwait feature present. [ 37.438224] using mwait in idle threads. [ 37.438227] CPU: L1 I cache: 32K, L1 D cache: 32K [ 37.438229] CPU: L2 cache: 4096K [ 37.438231] CPU: Physical Processor ID: 0 [ 37.438232] CPU: Processor Core ID: 0 [ 37.438234] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 37.438248] Checking 'hlt' instruction... OK. [ 37.454118] SMP alternatives: switching to UP code [ 37.454311] ACPI: Core revision 20060707 [ 37.456336] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 37.456351] SMP alternatives: switching to SMP code [ 37.456365] Booting processor 1/1 eip 3000 [ 37.467050] Initializing CPU#1 [ 37.545889] Calibrating delay using timer specific routine.. 4322.59 BogoMIPS (lpj=8645198) [ 37.545895] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 37.545899] monitor/mwait feature present. [ 37.545901] CPU: L1 I cache: 32K, L1 D cache: 32K [ 37.545902] CPU: L2 cache: 4096K [ 37.545904] CPU: Physical Processor ID: 0 [ 37.545905] CPU: Processor Core ID: 1 [ 37.545906] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 37.546473] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 37.546493] Total of 2 processors activated (8649.89 BogoMIPS). [ 37.546688] ENABLING IO-APIC IRQs [ 37.546882] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 37.693642] checking TSC synchronization across 2 CPUs: passed. [ 0.003994] Brought up 2 CPUs [ 0.255496] migration_cost=75 [ 0.255720] Booting paravirtualized kernel on bare hardware [ 0.255810] Time: 14:26:48 Date: 01/22/107 [ 0.255835] NET: Registered protocol family 16 [ 0.255900] EISA bus registered [ 0.255904] ACPI: bus type pci registered [ 0.255911] PCI: Using MMCONFIG [ 0.256618] Setting up standard PCI resources [ 0.259885] ACPI: Interpreter enabled [ 0.259887] ACPI: Using IOAPIC for interrupt routing [ 0.260324] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.260330] PCI: Probing PCI hardware (bus 00) [ 0.261353] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.261357] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 0.261569] Boot video device is 0000:01:00.0 [ 0.262151] PCI: Transparent bridge - 0000:00:1e.0 [ 0.262213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.267689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.268196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.268384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.268570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.269688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.270296] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.270471] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.270646] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.270819] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.270993] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.271166] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.271340] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.271513] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.279727] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.279735] pnp: PnP ACPI init [ 0.283607] pnp: PnP ACPI: found 9 devices [ 0.283611] PnPBIOS: Disabled by ACPI PNP [ 0.283644] PCI: Using ACPI for IRQ routing [ 0.283646] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.284200] PCI: Bridge: 0000:00:01.0 [ 0.284202] IO window: 3000-3fff [ 0.284205] MEM window: 50300000-503fffff [ 0.284207] PREFETCH window: 40000000-47ffffff [ 0.284210] PCI: Bridge: 0000:00:1c.0 [ 0.284212] IO window: 2000-2fff [ 0.284217] MEM window: 50200000-502fffff [ 0.284221] PREFETCH window: 50500000-505fffff [ 0.284225] PCI: Bridge: 0000:00:1c.1 [ 0.284226] IO window: disabled. [ 0.284231] MEM window: 50100000-501fffff [ 0.284234] PREFETCH window: disabled. [ 0.284239] PCI: Bridge: 0000:00:1c.2 [ 0.284241] IO window: 1000-1fff [ 0.284246] MEM window: 4c100000-500fffff [ 0.284249] PREFETCH window: 48000000-4bffffff [ 0.284254] PCI: Bridge: 0000:00:1e.0 [ 0.284255] IO window: disabled. [ 0.284260] MEM window: 4c000000-4c0fffff [ 0.284263] PREFETCH window: disabled. [ 0.284274] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.284277] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.284295] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.284299] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.284317] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.284321] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.284339] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.284343] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.284354] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.284375] NET: Registered protocol family 2 [ 0.331471] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.331567] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.331953] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.332157] TCP: Hash tables configured (established 131072 bind 65536) [ 0.332159] TCP reno registered [ 0.347496] checking if image is initramfs... it is [ 0.816458] Freeing initrd memory: 6605k freed [ 0.817024] audit: initializing netlink socket (disabled) [ 0.817041] audit(1172154409.236:1): initialized [ 0.817126] highmem bounce pool size: 64 pages [ 0.817201] VFS: Disk quotas dquot_6.5.1 [ 0.817220] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.817265] io scheduler noop registered [ 0.817267] io scheduler anticipatory registered [ 0.817269] io scheduler deadline registered [ 0.817278] io scheduler cfq registered (default) [ 0.817595] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.817612] assign_interrupt_mode Found MSI capability [ 0.817634] Allocate Port Service[0000:00:01.0:pcie00] [ 0.817666] Allocate Port Service[0000:00:01.0:pcie03] [ 0.817725] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.817770] assign_interrupt_mode Found MSI capability [ 0.817803] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.817831] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.817857] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.817954] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.817999] assign_interrupt_mode Found MSI capability [ 0.818031] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.818058] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.818084] Allocate Port Service[0000:00:1c.1:pcie03] [ 0.818183] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.818228] assign_interrupt_mode Found MSI capability [ 0.818260] Allocate Port Service[0000:00:1c.2:pcie00] [ 0.818286] Allocate Port Service[0000:00:1c.2:pcie02] [ 0.818314] Allocate Port Service[0000:00:1c.2:pcie03] [ 0.818468] isapnp: Scanning for PnP cards... [ 1.172391] isapnp: No Plug & Play device found [ 1.189319] Real Time Clock Driver v1.12ac [ 1.189373] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.189860] mice: PS/2 mouse device common for all mice [ 1.190487] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.190568] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.190571] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.190877] PNP: No PS/2 controller found. Probing ports directly. [ 1.191731] i8042.c: No controller found. [ 1.191789] EISA: Probing bus 0 at eisa.0 [ 1.191795] Cannot allocate resource for EISA slot 1 [ 1.191796] Cannot allocate resource for EISA slot 2 [ 1.191798] Cannot allocate resource for EISA slot 3 [ 1.191799] Cannot allocate resource for EISA slot 4 [ 1.191817] EISA: Detected 0 cards. [ 1.221846] TCP cubic registered [ 1.221853] NET: Registered protocol family 1 [ 1.221857] NET: Registered protocol family 8 [ 1.221859] NET: Registered protocol family 20 [ 1.221888] Starting balanced_irq [ 1.221897] Using IPI No-Shortcut mode [ 1.221933] Time: tsc clocksource has been installed. [ 1.221995] ACPI: (supports S0 S3 S4 S5) [ 1.222033] Magic number: 11:486:435 [ 1.222290] Freeing unused kernel memory: 324k freed [ 2.385495] Capability LSM initialized [ 2.411518] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu0Ist] [20060707] [ 2.411672] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu0Cst] [20060707] [ 2.411872] Monitor-Mwait will be used to enter C-1 state [ 2.411874] Monitor-Mwait will be used to enter C-2 state [ 2.411875] Monitor-Mwait will be used to enter C-3 state [ 2.411883] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.411887] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.412258] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu1Ist] [20060707] [ 2.412396] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu1Cst] [20060707] [ 2.412630] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.412634] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.672000] Time: hpet clocksource has been installed. [ 2.952000] usbcore: registered new interface driver usbfs [ 2.952000] usbcore: registered new interface driver hub [ 2.952000] usbcore: registered new device driver usb [ 2.952000] USB Universal Host Controller Interface driver v3.0 [ 2.952000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 2.952000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.952000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.952000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.952000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004080 [ 2.952000] usb usb1: configuration #1 chosen from 1 choice [ 2.952000] hub 1-0:1.0: USB hub found [ 2.952000] hub 1-0:1.0: 2 ports detected [ 2.992000] ieee1394: Initialized config rom entry `ip1394' [ 3.056000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 3.056000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.056000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.056000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.056000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004060 [ 3.056000] usb usb2: configuration #1 chosen from 1 choice [ 3.056000] hub 2-0:1.0: USB hub found [ 3.056000] hub 2-0:1.0: 2 ports detected [ 3.160000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.160000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.160000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.160000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.160000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 3.160000] usb usb3: configuration #1 chosen from 1 choice [ 3.160000] hub 3-0:1.0: USB hub found [ 3.160000] hub 3-0:1.0: 2 ports detected [ 3.264000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 3.264000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.264000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.264000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.264000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 [ 3.264000] usb usb4: configuration #1 chosen from 1 choice [ 3.264000] hub 4-0:1.0: USB hub found [ 3.264000] hub 4-0:1.0: 2 ports detected [ 3.296000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 3.372000] SCSI subsystem initialized [ 3.372000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.372000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.372000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.372000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 3.372000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.372000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.372000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x50405400 [ 3.376000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.376000] usb usb5: configuration #1 chosen from 1 choice [ 3.376000] hub 5-0:1.0: USB hub found [ 3.376000] hub 5-0:1.0: 8 ports detected [ 3.376000] libata version 2.00 loaded. [ 3.480000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 3.480000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 3.480000] ICH7: chipset revision 2 [ 3.480000] ICH7: not 100% native mode: will probe irqs later [ 3.480000] ide0: BM-DMA at 0x40b0-0x40b7, BIOS settings: hda:pio, hdb:pio [ 3.480000] ide1: BM-DMA at 0x40b8-0x40bf, BIOS settings: hdc:pio, hdd:pio [ 3.480000] Probing IDE interface ide0... [ 3.828000] usb 1-1: device not accepting address 2, error -71 [ 4.216000] hda: MATSHITADVD-R UJ-857D, ATAPI CD/DVD-ROM drive [ 4.552000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.552000] Probing IDE interface ide1... [ 5.004000] usb 5-4: new high speed USB device using ehci_hcd and address 4 [ 5.120000] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 20 [ 5.136000] usb 5-4: configuration #1 chosen from 1 choice [ 5.168000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 5.176000] ata_piix 0000:00:1f.2: version 2.00ac7 [ 5.176000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] [ 5.176000] ata_piix 0000:00:1f.2: invalid MAP value 0 [ 5.332000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 5.332000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.332000] ata1: SATA max UDMA/133 cmd 0x40C8 ctl 0x40E6 bmdma 0x40A0 irq 20 [ 5.332000] ata2: SATA max UDMA/133 cmd 0x40C0 ctl 0x40E2 bmdma 0x40A8 irq 20 [ 5.332000] scsi0 : ata_piix [ 5.496000] ATA: abnormal status 0x7F on port 0x40CF [ 5.508000] ATA: abnormal status 0x7F on port 0x40CF [ 5.528000] ata1.01: ATA-8, max UDMA/100, 234441648 sectors: LBA48 NCQ (depth 0/32) [ 5.528000] ata1.01: ata1: dev 1 multi count 16 [ 5.552000] ata1.01: configured for UDMA/100 [ 5.552000] scsi1 : ata_piix [ 5.716000] ATA: abnormal status 0x7F on port 0x40C7 [ 5.720000] scsi 0:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 [ 5.724000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [ 5.724000] sda: Write Protect is off [ 5.724000] sda: Mode Sense: 00 3a 00 00 [ 5.724000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.724000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [ 5.724000] sda: Write Protect is off [ 5.724000] sda: Mode Sense: 00 3a 00 00 [ 5.724000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.724000] sda: sda1 sda2 sda3 sda4 [ 5.728000] sd 0:0:1:0: Attached scsi disk sda [ 5.732000] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) [ 5.732000] Uniform CD-ROM driver Revision: 3.20 [ 5.732000] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 5.744000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 5.920000] usb 1-1: configuration #1 chosen from 1 choice [ 6.164000] usb 1-2: new full speed USB device using uhci_hcd and address 5 [ 6.356000] usb 1-2: configuration #1 chosen from 1 choice [ 6.444000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe6b83e8] [ 6.608000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 6.788000] usb 3-2: configuration #1 chosen from 1 choice [ 7.016000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 7.032000] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 7.068000] ISO 9660 Extensions: RRIP_1991A [ 7.116000] Registering unionfs 20060916-2203 [ 7.116000] unionfs: debugging is not enabled [ 7.120000] loop: loaded (max 8 devices) [ 7.212000] usb 4-1: configuration #1 chosen from 1 choice [ 7.216000] usbcore: registered new interface driver hiddev [ 7.228000] input: Genius NetScroll+Mini Traveler as /class/input/input0 [ 7.228000] input: USB HID v1.10 Mouse [Genius NetScroll+Mini Traveler] on usb-0000:00:1d.0-1 [ 7.232000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input1 [ 7.232000] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 7.236000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input2 [ 7.236000] input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 7.240000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input3 [ 7.240000] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 7.244000] hiddev96: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 [ 7.260000] input: HID 05ac:1000 as /class/input/input4 [ 7.260000] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 7.280000] input: HID 05ac:1000 as /class/input/input5 [ 7.280000] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 7.280000] usbcore: registered new interface driver usbhid [ 7.280000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 7.452000] squashfs: version 3.1 (2006/08/19) Phillip Lougher [ 67.608000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 67.828000] Linux agpgart interface v0.101 (c) Dave Jones [ 68.028000] iTCO_vendor_support: vendor-support=0 [ 68.160000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 68.648000] agpgart: Detected an Intel 945GM Chipset. [ 68.664000] agpgart: AGP aperture is 256M @ 0x0 [ 69.096000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 69.096000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) [ 69.096000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 69.324000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 69.324000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 69.324000] sky2 v1.10 addr 0x50200000 irq 16 Yukon-EC (0xb6) rev 2 [ 69.324000] sky2 eth0: addr 00:17:f2:ce:c6:e5 [ 69.388000] intel_rng: FWH not detected [ 69.528000] sky2 eth0: enabling interface [ 69.528000] sky2 eth0: ram buffer 48K [ 69.932000] usbcore: registered new interface driver appleir [ 69.932000] ubuntu/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver [ 70.156000] usbcore: registered new interface driver appletouch [ 70.240000] Linux video capture interface: v2.00 [ 70.532000] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 70.532000] usbcore: registered new interface driver uvcvideo [ 70.532000] USB Video Class driver (v0.1.0-c) [ 71.196000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 71.744000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 71.744000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 72.872000] NET: Registered protocol family 17 [ 73.116000] hda_intel: azx_get_response timeout, switching to polling mode... [ 73.964000] fuse init (API version 7.8) [ 76.184000] NET: Registered protocol family 10 [ 76.184000] lo: Disabled Privacy Extensions [ 81.856000] ACPI: AC Adapter [ADP1] (on-line) [ 82.068000] ACPI: Battery Slot [BAT0] (battery present) [ 82.080000] input: Power Button (FF) as /class/input/input6 [ 82.080000] ACPI: Power Button (FF) [PWRF] [ 82.080000] input: Lid Switch as /class/input/input7 [ 82.080000] ACPI: Lid Switch [LID0] [ 82.080000] input: Power Button (CM) as /class/input/input8 [ 82.080000] ACPI: Power Button (CM) [PWRB] [ 82.080000] input: Sleep Button (CM) as /class/input/input9 [ 82.080000] ACPI: Sleep Button (CM) [SLPB] [ 82.208000] No dock devices found. [ 82.224000] Using specific hotkey driver [ 82.268000] ibm_acpi: ec object not found [ 82.360000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 83.740000] lp: driver loaded but no devices found [ 83.840000] ppdev: user-space parallel port driver [ 86.552000] eth0: no IPv6 routers present [ 90.440000] apm: BIOS not found. [ 100.268000] Bluetooth: Core ver 2.11 [ 100.268000] NET: Registered protocol family 31 [ 100.268000] Bluetooth: HCI device and connection manager initialized [ 100.268000] Bluetooth: HCI socket layer initialized [ 100.328000] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 100.340000] Bluetooth: L2CAP ver 2.8 [ 100.340000] Bluetooth: L2CAP socket layer initialized [ 100.568000] Bluetooth: RFCOMM socket layer initialized [ 100.568000] Bluetooth: RFCOMM TTY layer initialized [ 100.568000] Bluetooth: RFCOMM ver 1.8 [ 100.656000] usb 4-1: USB disconnect, address 2 [ 100.896000] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 101.092000] usb 4-1: configuration #1 chosen from 1 choice [ 101.420000] Bluetooth: HCI USB driver ver 2.9 [ 101.424000] usbcore: registered new interface driver hci_usb [ 139.108000] eth0: no IPv6 routers present