Here's the dmesg after my USB mouse freeze from the Gutsy Live CD. This mouse is plugged directly. [ 0.000000] Linux version 2.6.22-8-generic (buildd@palmer) (gcc version 4.1.3 20070629 (prerelease) (Ubuntu 4.1.2-13ubuntu2)) #1 SMP Thu Jul 12 15:59:45 GMT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5b50 [ 0.000000] Entering add_active_range(0, 0, 524016) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524016 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524016 [ 0.000000] On node 0 totalpages: 524016 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292339 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F75D0, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT 7FEF30C0, 0054 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FEF9640, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FEF3240, 63B3 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FEF0000, 0040 [ 0.000000] ACPI: HPET 7FEF9880, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 7FEF9900, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FEF9780, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: SSDT 7FEF9980, 015C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: SSDT 7FEF9E10, 0275 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) [ 0.000000] Built 1 zonelists. Total pages: 519923 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2400.093 MHz processor. [ 44.689010] spurious 8259A interrupt: IRQ7. [ 44.690244] Console: colour VGA+ 80x25 [ 44.690541] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 44.690807] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 44.755180] Memory: 2066728k/2096064k available (2009k kernel code, 28120k reserved, 918k data, 364k init, 1178560k highmem) [ 44.755187] virtual kernel memory layout: [ 44.755188] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 44.755188] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 44.755189] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 44.755190] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 44.755191] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 44.755191] .data : 0xc02f6606 - 0xc03dbe64 ( 918 kB) [ 44.755192] .text : 0xc0100000 - 0xc02f6606 (2009 kB) [ 44.755194] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 44.755226] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 44.755249] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 44.755253] hpet0: 3 32-bit timers, 25000000 Hz [ 44.836144] Calibrating delay using timer specific routine.. 4803.98 BogoMIPS (lpj=9607966) [ 44.836162] Security Framework v1.0.0 initialized [ 44.836166] SELinux: Disabled at boot. [ 44.836175] Mount-cache hash table entries: 512 [ 44.836274] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 44.836280] monitor/mwait feature present. [ 44.836281] using mwait in idle threads. [ 44.836284] CPU: L1 I cache: 32K, L1 D cache: 32K [ 44.836285] CPU: L2 cache: 4096K [ 44.836287] CPU: Physical Processor ID: 0 [ 44.836288] CPU: Processor Core ID: 0 [ 44.836290] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 44.836296] Compat vDSO mapped to ffffe000. [ 44.836306] Checking 'hlt' instruction... OK. [ 44.852211] SMP alternatives: switching to UP code [ 44.852486] ACPI: Core revision 20070126 [ 44.856845] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 44.856859] SMP alternatives: switching to SMP code [ 44.856871] Booting processor 1/1 eip 3000 [ 44.868972] Initializing CPU#1 [ 44.947965] Calibrating delay using timer specific routine.. 4800.00 BogoMIPS (lpj=9600019) [ 44.947969] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 44.947972] monitor/mwait feature present. [ 44.947975] CPU: L1 I cache: 32K, L1 D cache: 32K [ 44.947976] CPU: L2 cache: 4096K [ 44.947977] CPU: Physical Processor ID: 0 [ 44.947978] CPU: Processor Core ID: 1 [ 44.947979] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 44.948513] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 44.948528] Total of 2 processors activated (9603.99 BogoMIPS). [ 44.948754] ENABLING IO-APIC IRQs [ 44.948937] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 45.095799] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 45.115780] Brought up 2 CPUs [ 45.856044] migration_cost=135 [ 45.856139] Booting paravirtualized kernel on bare hardware [ 45.856190] Time: 21:52:37 Date: 08/05/107 [ 45.856204] NET: Registered protocol family 16 [ 45.856259] EISA bus registered [ 45.856263] ACPI: bus type pci registered [ 45.856270] PCI: Using MMCONFIG [ 45.856773] Setting up standard PCI resources [ 45.858350] mtrr: your CPUs had inconsistent fixed MTRR settings [ 45.858352] mtrr: probably your BIOS does not setup all CPUs. [ 45.858353] mtrr: corrected configuration. [ 45.859472] ACPI: EC: Look up EC in DSDT [ 45.864887] ACPI: Interpreter enabled [ 45.864889] ACPI: (supports S0 S1 S3 S4 S5) [ 45.864901] ACPI: Using IOAPIC for interrupt routing [ 45.873064] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 45.873076] PCI: Probing PCI hardware (bus 00) [ 45.874420] PCI: Transparent bridge - 0000:00:10.0 [ 45.874452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 45.874704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 45.968152] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.968300] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) [ 45.968445] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) [ 45.968589] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.968734] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) [ 45.968877] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.969020] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.969163] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.969308] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 45.969451] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.969596] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 45.969739] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.969883] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 45.970026] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.970173] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.970318] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 45.970466] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 45.970610] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 45.970755] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 45.970900] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 45.971070] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 45.971235] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 45.971399] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 45.971562] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 45.971725] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 45.971889] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 45.972052] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 45.972216] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 45.972379] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 45.972544] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 45.972708] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 45.972873] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 45.973037] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 45.973202] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 45.973366] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 45.973531] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 45.973695] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 45.973859] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 45.974023] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 45.974188] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 45.974352] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 45.974453] Linux Plug and Play Support v0.97 (c) Adam Belay [ 45.974459] pnp: PnP ACPI init [ 45.974465] ACPI: bus type pnp registered [ 45.978432] pnp: PnP ACPI: found 13 devices [ 45.978434] ACPI: ACPI bus type pnp unregistered [ 45.978437] PnPBIOS: Disabled by ACPI PNP [ 45.978469] PCI: Using ACPI for IRQ routing [ 45.978471] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 45.978561] NET: Registered protocol family 8 [ 45.978562] NET: Registered protocol family 20 [ 45.978596] pnp: 00:01: ioport range 0x1000-0x107f has been reserved [ 45.978598] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 45.978600] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 45.978602] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved [ 45.978603] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 45.978605] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 45.978607] pnp: 00:01: iomem range 0x0-0x0 could not be reserved [ 45.978615] pnp: 00:0b: iomem range 0xf0000000-0xf1ffffff could not be reserved [ 45.978619] pnp: 00:0c: iomem range 0xd5800-0xd7fff has been reserved [ 45.978621] pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 45.978623] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 45.978625] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 45.982329] Time: tsc clocksource has been installed. [ 45.982335] Switched to high resolution mode on CPU 0 [ 45.982400] Switched to high resolution mode on CPU 1 [ 46.008785] PCI: Bridge: 0000:00:03.0 [ 46.008787] IO window: c000-cfff [ 46.008790] MEM window: fa000000-fcffffff [ 46.008792] PREFETCH window: d0000000-dfffffff [ 46.008793] PCI: Bridge: 0000:00:05.0 [ 46.008795] IO window: a000-afff [ 46.008797] MEM window: fdf00000-fdffffff [ 46.008799] PREFETCH window: fde00000-fdefffff [ 46.008801] PCI: Bridge: 0000:00:06.0 [ 46.008802] IO window: e000-efff [ 46.008804] MEM window: fdd00000-fddfffff [ 46.008806] PREFETCH window: fdc00000-fdcfffff [ 46.008808] PCI: Bridge: 0000:00:07.0 [ 46.008809] IO window: d000-dfff [ 46.008811] MEM window: fda00000-fdafffff [ 46.008813] PREFETCH window: fd900000-fd9fffff [ 46.008815] PCI: Bridge: 0000:00:10.0 [ 46.008817] IO window: b000-bfff [ 46.008819] MEM window: e8000000-efffffff [ 46.008821] PREFETCH window: fdb00000-fdbfffff [ 46.008830] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 46.008835] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 46.008840] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 46.008844] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 46.008850] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 46.008857] NET: Registered protocol family 2 [ 46.054173] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 46.054214] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 46.054651] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 46.054836] TCP: Hash tables configured (established 131072 bind 65536) [ 46.054838] TCP reno registered [ 46.070225] checking if image is initramfs... it is [ 46.513538] Freeing initrd memory: 7007k freed [ 46.514015] audit: initializing netlink socket (disabled) [ 46.514030] audit(1189029157.604:1): initialized [ 46.514114] highmem bounce pool size: 64 pages [ 46.515383] VFS: Disk quotas dquot_6.5.1 [ 46.515420] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 46.515486] io scheduler noop registered [ 46.515488] io scheduler anticipatory registered [ 46.515489] io scheduler deadline registered [ 46.515498] io scheduler cfq registered (default) [ 46.529446] Boot video device is 0000:01:00.0 [ 46.529518] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 46.529535] assign_interrupt_mode Found MSI capability [ 46.529551] Allocate Port Service[0000:00:03.0:pcie00] [ 46.529573] Allocate Port Service[0000:00:03.0:pcie03] [ 46.529614] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 46.529631] assign_interrupt_mode Found MSI capability [ 46.529643] Allocate Port Service[0000:00:05.0:pcie00] [ 46.529665] Allocate Port Service[0000:00:05.0:pcie03] [ 46.529705] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 46.529722] assign_interrupt_mode Found MSI capability [ 46.529733] Allocate Port Service[0000:00:06.0:pcie00] [ 46.529756] Allocate Port Service[0000:00:06.0:pcie03] [ 46.529797] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 46.529813] assign_interrupt_mode Found MSI capability [ 46.529825] Allocate Port Service[0000:00:07.0:pcie00] [ 46.529847] Allocate Port Service[0000:00:07.0:pcie03] [ 46.529964] isapnp: Scanning for PnP cards... [ 46.882294] isapnp: No Plug & Play device found [ 46.896229] Real Time Clock Driver v1.12ac [ 46.896430] hpet_resources: 0xfeff0000 is busy [ 46.896449] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 46.896907] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 46.897351] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 46.897511] input: Macintosh mouse button emulation as /class/input/input0 [ 46.897590] PNP: No PS/2 controller found. Probing ports directly. [ 46.898105] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 46.898109] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 46.898199] mice: PS/2 mouse device common for all mice [ 46.898277] EISA: Probing bus 0 at eisa.0 [ 46.898281] Cannot allocate resource for EISA slot 1 [ 46.898300] EISA: Detected 0 cards. [ 46.898364] TCP cubic registered [ 46.898373] NET: Registered protocol family 1 [ 46.898391] Using IPI No-Shortcut mode [ 46.898536] Magic number: 7:959:903 [ 46.898828] Freeing unused kernel memory: 364k freed [ 48.036523] Capability LSM initialized [ 48.039313] ACPI: Fan [FAN] (on) [ 48.042803] ACPI: SSDT 7FEF9D80, 0087 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 48.042944] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 48.042951] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 48.043917] ACPI: Thermal Zone [THRM] (40 C) [ 48.398502] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 48.398506] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 48.398953] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 48.398974] NFORCE-MCP51: chipset revision 161 [ 48.398976] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 48.398980] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 48.398984] ide0: BM-DMA at 0xfd00-0xfd07, BIOS settings: hda:DMA, hdb:DMA [ 48.398990] ide1: BM-DMA at 0xfd08-0xfd0f, BIOS settings: hdc:DMA, hdd:DMA [ 48.398994] Probing IDE interface ide0... [ 48.407969] usbcore: registered new interface driver usbfs [ 48.407983] usbcore: registered new interface driver hub [ 48.407997] usbcore: registered new device driver usb [ 48.443208] SCSI subsystem initialized [ 48.446604] libata version 2.21 loaded. [ 48.455547] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 48.456290] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 48.482304] Floppy drive(s): fd0 is 1.44M [ 48.501922] FDC 0 is a post-1991 82077 [ 49.133403] hda: LITE-ON DVDRW LH-20A1H, ATAPI CD/DVD-ROM drive [ 49.169258] end_request: I/O error, dev fd0, sector 0 [ 49.804899] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 49.817402] Probing IDE interface ide1... [ 50.199627] end_request: I/O error, dev fd0, sector 0 [ 50.385776] sata_nv 0000:00:0e.0: version 3.4 [ 50.386056] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 50.386061] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16 [ 50.386086] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 50.386133] scsi0 : sata_nv [ 50.386233] scsi1 : sata_nv [ 50.386321] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001f800 irq 16 [ 50.386324] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001f808 irq 16 [ 50.850598] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 50.891803] ata1.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133 [ 50.891806] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 50.958331] ata1.00: configured for UDMA/133 [ 51.229995] end_request: I/O error, dev fd0, sector 0 [ 51.265931] ata2: SATA link down (SStatus 0 SControl 300) [ 51.276425] scsi 0:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5 [ 51.276867] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 51.276871] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17 [ 51.276893] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 51.276918] scsi2 : sata_nv [ 51.277017] scsi3 : sata_nv [ 51.277107] ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001f300 irq 17 [ 51.277110] ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001f308 irq 17 [ 51.585425] ata3: SATA link down (SStatus 0 SControl 300) [ 51.904919] ata4: SATA link down (SStatus 0 SControl 300) [ 51.915670] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 51.915674] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 18 [ 51.915679] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 51.915682] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 51.916730] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 51.916747] ehci_hcd 0000:00:0b.1: debug port 1 [ 51.916751] PCI: cache line size of 32 is not supported by device 0000:00:0b.1 [ 51.916757] ehci_hcd 0000:00:0b.1: irq 18, io mem 0xfe02e000 [ 51.916764] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 51.916977] usb usb1: configuration #1 chosen from 1 choice [ 51.917072] hub 1-0:1.0: USB hub found [ 51.917077] hub 1-0:1.0: 8 ports detected [ 51.919659] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 51.919668] sd 0:0:0:0: [sda] Write Protect is off [ 51.919669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 51.919679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.919713] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 51.919725] sd 0:0:0:0: [sda] Write Protect is off [ 51.919727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 51.919737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.919740] sda: sda1 [ 51.937770] sd 0:0:0:0: [sda] Attached SCSI disk [ 51.940121] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 52.021151] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 52.021156] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 19 [ 52.021161] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 52.021167] forcedeth: using HIGHDMA [ 52.260364] end_request: I/O error, dev fd0, sector 0 [ 52.444068] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 52.540191] eth0: forcedeth.c: subsystem: 01043:8221 bound to 0000:00:14.0 [ 52.540853] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 52.540856] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 [ 52.540866] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 52.540868] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 52.540889] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 52.540900] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfe02f000 [ 52.550377] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) [ 52.550383] Uniform CD-ROM driver Revision: 3.20 [ 52.579649] usb 1-3: configuration #1 chosen from 1 choice [ 52.597871] usb usb2: configuration #1 chosen from 1 choice [ 52.597891] hub 2-0:1.0: USB hub found [ 52.597897] hub 2-0:1.0: 8 ports detected [ 52.700042] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 52.700047] ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20 [ 52.752670] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[effff000-effff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 52.819475] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 52.965291] usb 1-4: configuration #1 chosen from 1 choice [ 53.266763] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 53.334663] end_request: I/O error, dev fd0, sector 0 [ 53.479502] usb 2-1: configuration #1 chosen from 1 choice [ 53.482568] usbcore: registered new interface driver libusual [ 53.483603] usbcore: registered new interface driver hiddev [ 53.484938] Initializing USB Mass Storage driver... [ 53.485040] scsi4 : SCSI emulation for USB Mass Storage devices [ 53.485102] usb-storage: device found at 3 [ 53.485103] usb-storage: waiting for device to settle before scanning [ 53.485171] hiddev96: USB HID v1.10 Device [Western Digital External HDD] on usb-0000:00:0b.1-4 [ 53.485205] scsi5 : SCSI emulation for USB Mass Storage devices [ 53.485238] usb-storage: device found at 4 [ 53.485239] usb-storage: waiting for device to settle before scanning [ 53.490582] input: Logitech USB Receiver as /class/input/input1 [ 53.490591] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-1 [ 53.500418] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: Fixing up Logitech keyboard report descriptor [ 53.500804] input: Logitech USB Receiver as /class/input/input2 [ 53.500835] input,hiddev97: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-1 [ 53.500843] usbcore: registered new interface driver usbhid [ 53.500845] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 53.500852] usbcore: registered new interface driver usb-storage [ 53.500855] USB Mass Storage support registered. [ 53.561114] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 53.579049] ISO 9660 Extensions: RRIP_1991A [ 53.601218] Registering unionfs 1.4 [ 53.601220] unionfs: debugging is not enabled [ 53.606519] loop: module loaded [ 53.690635] squashfs: version 3.2-UBUNTU (2007/04/10) Phillip Lougher [ 54.025694] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800010d7abb] [ 58.474979] usb-storage: device scan complete [ 58.475585] usb-storage: device scan complete [ 58.476093] scsi 4:0:0:0: Direct-Access WD 5000KS External 101a PQ: 0 ANSI: 4 [ 58.484937] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 58.485934] sd 4:0:0:0: [sdb] Write Protect is off [ 58.485936] sd 4:0:0:0: [sdb] Mode Sense: 11 00 00 00 [ 58.485937] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 58.487931] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 58.488929] sd 4:0:0:0: [sdb] Write Protect is off [ 58.488931] sd 4:0:0:0: [sdb] Mode Sense: 11 00 00 00 [ 58.488932] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 58.488935] sdb: sdb1 [ 58.489967] sd 4:0:0:0: [sdb] Attached SCSI disk [ 58.489994] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 58.510948] scsi 5:0:0:0: Direct-Access WD 1200BB External 0602 PQ: 0 ANSI: 0 [ 58.512895] sd 5:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB) [ 58.515518] sd 5:0:0:0: [sdc] Write Protect is off [ 58.515521] sd 5:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 58.515522] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 58.517136] sd 5:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB) [ 58.518882] sd 5:0:0:0: [sdc] Write Protect is off [ 58.518884] sd 5:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 58.518885] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 58.518887] sdc: sdc1 sdc2 < sdc5 > [ 58.536664] sd 5:0:0:0: [sdc] Attached SCSI disk [ 58.536690] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 92.712992] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 92.830882] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 93.060054] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 93.060077] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 [ 93.637203] NET: Registered protocol family 17 [ 93.678291] parport_pc 00:0a: reported by Plug and Play ACPI [ 93.678316] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 93.757975] Linux agpgart interface v0.102 (c) Dave Jones [ 93.760008] input: PC Speaker as /class/input/input3 [ 94.173918] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 94.173922] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17 [ 94.173935] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 94.377673] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 95.224788] fuse init (API version 7.8) [ 96.021225] NET: Registered protocol family 10 [ 96.021305] lo: Disabled Privacy Extensions [ 96.253477] Adding 4803392k swap on /dev/sdc5. Priority:-1 extents:1 across:4803392k [ 101.785077] No dock devices found. [ 102.038923] input: Power Button (FF) as /class/input/input4 [ 102.039030] ACPI: Power Button (FF) [PWRF] [ 102.049530] input: Power Button (CM) as /class/input/input5 [ 102.068854] ACPI: Power Button (CM) [PWRB] [ 102.124177] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 106.482508] eth0: no IPv6 routers present [ 108.330981] lp0: using parport0 (interrupt-driven). [ 108.360261] ppdev: user-space parallel port driver [ 115.117905] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 115.117909] apm: disabled - APM is not SMP safe. [ 122.561830] Bluetooth: Core ver 2.11 [ 122.561895] NET: Registered protocol family 31 [ 122.561897] Bluetooth: HCI device and connection manager initialized [ 122.561900] Bluetooth: HCI socket layer initialized [ 122.880334] Bluetooth: L2CAP ver 2.8 [ 122.880339] Bluetooth: L2CAP socket layer initialized [ 123.072548] Bluetooth: RFCOMM socket layer initialized [ 123.072659] Bluetooth: RFCOMM TTY layer initialized [ 123.072661] Bluetooth: RFCOMM ver 1.8 [ 126.056356] kjournald starting. Commit interval 5 seconds [ 126.056365] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 126.062188] EXT3 FS on sdc1, internal journal [ 126.062194] EXT3-fs: mounted filesystem with ordered data mode. [ 196.801002] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 196.883184] JFS: nTxBlock = 8192, nTxLock = 65536 [ 197.068989] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 197.069950] SGI XFS Quota Management subsystem [ 197.358164] end_request: I/O error, dev fd0, sector 0 [ 197.382126] end_request: I/O error, dev fd0, sector 0 [ 247.059773] end_request: I/O error, dev fd0, sector 0 [ 247.083437] end_request: I/O error, dev fd0, sector 0 [ 251.799797] QNX4 filesystem 0.2.3 registered. [ 251.858482] cramfs: wrong magic [ 251.866615] Unable to identify CD-ROM format. [ 251.874423] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 251.877467] VFS: Can't find ext3 filesystem on dev sda1. [ 251.879127] VFS: Can't find an ext2 filesystem on dev sda1. [ 251.880783] FAT: bogus number of reserved sectors [ 251.880786] VFS: Can't find a valid FAT filesystem on dev sda1. [ 251.912640] NTFS volume version 3.1. [ 252.030275] cramfs: wrong magic [ 252.119124] Unable to identify CD-ROM format. [ 252.122870] SQUASHFS error: Can't find a SQUASHFS superblock on sdb1 [ 252.127614] VFS: Can't find ext3 filesystem on dev sdb1. [ 252.130107] VFS: Can't find an ext2 filesystem on dev sdb1. [ 252.133852] FAT: bogus number of reserved sectors [ 252.133854] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 252.219732] NTFS volume version 3.1. [ 252.429506] cramfs: wrong magic [ 252.430955] attempt to access beyond end of device [ 252.430962] sdc2: rw=0, want=66, limit=2 [ 252.430965] isofs_fill_super: bread failed, dev=sdc2, iso_blknum=16, block=32 [ 252.433384] SQUASHFS error: Can't find a SQUASHFS superblock on sdc2 [ 252.436110] attempt to access beyond end of device [ 252.436113] sdc2: rw=0, want=4, limit=2 [ 252.436278] EXT3-fs: unable to read superblock [ 252.437736] attempt to access beyond end of device [ 252.437739] sdc2: rw=0, want=4, limit=2 [ 252.437742] EXT2-fs: unable to read superblock [ 252.441368] FAT: bogus number of reserved sectors [ 252.441371] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 252.443493] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Primary boot sector is invalid. [ 252.443496] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. [ 252.443499] NTFS-fs error (device sdc2): ntfs_fill_super(): Not an NTFS volume. [ 252.445496] attempt to access beyond end of device [ 252.445499] sdc2: rw=0, want=72, limit=2 [ 252.445504] attempt to access beyond end of device [ 252.445506] sdc2: rw=0, want=128, limit=2 [ 252.447167] attempt to access beyond end of device [ 252.447170] sdc2: rw=0, want=18, limit=2 [ 252.447175] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 8, size 1024) [ 252.447180] attempt to access beyond end of device [ 252.447183] sdc2: rw=0, want=130, limit=2 [ 252.447186] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 64, size 1024) [ 252.447189] ReiserFS: sdc2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc2 [ 252.449282] attempt to access beyond end of device [ 252.449285] sdc2: rw=0, want=8, limit=2 [ 252.449458] XFS: SB read failed [ 252.452352] FAT: bogus number of reserved sectors [ 252.452354] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 252.453922] attempt to access beyond end of device [ 252.453926] sdc2: rw=0, want=4, limit=2 [ 252.453929] MINIX-fs: unable to read superblock [ 252.461279] attempt to access beyond end of device [ 252.461283] sdc2: rw=0, want=3, limit=2 [ 252.461286] hfs: unable to find HFS+ superblock [ 252.464334] qnx4: wrong fsid in superblock. [ 252.465740] You didn't specify the type of your ufs filesystem [ 252.465741] [ 252.465741] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 252.465743] [ 252.465743] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 252.466193] attempt to access beyond end of device [ 252.466196] sdc2: rw=0, want=18, limit=2 [ 252.467768] attempt to access beyond end of device [ 252.467771] sdc2: rw=0, want=3, limit=2 [ 252.467778] hfs: can't find a HFS filesystem on dev sdc2. [ 252.600128] cramfs: wrong magic [ 252.607892] Unable to identify CD-ROM format. [ 252.614605] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 252.617420] VFS: Can't find ext3 filesystem on dev sda1. [ 252.618887] VFS: Can't find an ext2 filesystem on dev sda1. [ 252.620433] FAT: bogus number of reserved sectors [ 252.620435] VFS: Can't find a valid FAT filesystem on dev sda1. [ 252.644505] NTFS volume version 3.1. [ 252.728176] cramfs: wrong magic [ 252.826011] Unable to identify CD-ROM format. [ 252.829761] SQUASHFS error: Can't find a SQUASHFS superblock on sdb1 [ 252.835751] VFS: Can't find ext3 filesystem on dev sdb1. [ 252.838745] VFS: Can't find an ext2 filesystem on dev sdb1. [ 252.841990] FAT: bogus number of reserved sectors [ 252.841994] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 252.925867] NTFS volume version 3.1. [ 253.106660] cramfs: wrong magic [ 253.108748] attempt to access beyond end of device [ 253.108753] sdc2: rw=0, want=66, limit=2 [ 253.108931] isofs_fill_super: bread failed, dev=sdc2, iso_blknum=16, block=32 [ 253.112321] SQUASHFS error: Can't find a SQUASHFS superblock on sdc2 [ 253.116553] attempt to access beyond end of device [ 253.116557] sdc2: rw=0, want=4, limit=2 [ 253.116732] EXT3-fs: unable to read superblock [ 253.118882] attempt to access beyond end of device [ 253.118886] sdc2: rw=0, want=4, limit=2 [ 253.119062] EXT2-fs: unable to read superblock [ 253.123298] FAT: bogus number of reserved sectors [ 253.123302] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 253.126420] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Primary boot sector is invalid. [ 253.126425] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. [ 253.126429] NTFS-fs error (device sdc2): ntfs_fill_super(): Not an NTFS volume. [ 253.128987] attempt to access beyond end of device [ 253.128991] sdc2: rw=0, want=72, limit=2 [ 253.128998] attempt to access beyond end of device [ 253.129002] sdc2: rw=0, want=128, limit=2 [ 253.131025] attempt to access beyond end of device [ 253.131028] sdc2: rw=0, want=18, limit=2 [ 253.131034] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 8, size 1024) [ 253.131038] attempt to access beyond end of device [ 253.131042] sdc2: rw=0, want=130, limit=2 [ 253.131045] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 64, size 1024) [ 253.131048] ReiserFS: sdc2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc2 [ 253.132932] attempt to access beyond end of device [ 253.132935] sdc2: rw=0, want=8, limit=2 [ 253.133054] XFS: SB read failed [ 253.136275] FAT: bogus number of reserved sectors [ 253.136277] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 253.137784] attempt to access beyond end of device [ 253.137787] sdc2: rw=0, want=4, limit=2 [ 253.137789] MINIX-fs: unable to read superblock [ 253.139232] attempt to access beyond end of device [ 253.139235] sdc2: rw=0, want=3, limit=2 [ 253.139238] hfs: unable to find HFS+ superblock [ 253.142015] qnx4: wrong fsid in superblock. [ 253.143410] You didn't specify the type of your ufs filesystem [ 253.143412] [ 253.143412] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 253.143413] [ 253.143414] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 253.143749] attempt to access beyond end of device [ 253.143751] sdc2: rw=0, want=18, limit=2 [ 253.145224] attempt to access beyond end of device [ 253.145228] sdc2: rw=0, want=3, limit=2 [ 253.145231] hfs: can't find a HFS filesystem on dev sdc2. [ 253.218390] NTFS volume version 3.1. [ 256.264302] cramfs: wrong magic [ 256.273124] Unable to identify CD-ROM format. [ 256.282253] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 256.286699] VFS: Can't find ext3 filesystem on dev sda1. [ 256.288888] VFS: Can't find an ext2 filesystem on dev sda1. [ 256.291079] FAT: bogus number of reserved sectors [ 256.291083] VFS: Can't find a valid FAT filesystem on dev sda1. [ 256.320553] NTFS volume version 3.1. [ 256.419369] cramfs: wrong magic [ 256.506218] Unable to identify CD-ROM format. [ 256.509968] SQUASHFS error: Can't find a SQUASHFS superblock on sdb1 [ 256.515959] VFS: Can't find ext3 filesystem on dev sdb1. [ 256.519951] VFS: Can't find an ext2 filesystem on dev sdb1. [ 256.523946] FAT: bogus number of reserved sectors [ 256.523950] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 256.600083] NTFS volume version 3.1. [ 256.790545] cramfs: wrong magic [ 256.792586] attempt to access beyond end of device [ 256.792591] sdc2: rw=0, want=66, limit=2 [ 256.792596] isofs_fill_super: bread failed, dev=sdc2, iso_blknum=16, block=32 [ 256.795524] SQUASHFS error: Can't find a SQUASHFS superblock on sdc2 [ 256.799778] attempt to access beyond end of device [ 256.799782] sdc2: rw=0, want=4, limit=2 [ 256.799786] EXT3-fs: unable to read superblock [ 256.801790] attempt to access beyond end of device [ 256.801794] sdc2: rw=0, want=4, limit=2 [ 256.801799] EXT2-fs: unable to read superblock [ 256.805499] FAT: bogus number of reserved sectors [ 256.805502] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 256.807873] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Primary boot sector is invalid. [ 256.807877] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. [ 256.807879] NTFS-fs error (device sdc2): ntfs_fill_super(): Not an NTFS volume. [ 256.809733] attempt to access beyond end of device [ 256.809736] sdc2: rw=0, want=72, limit=2 [ 256.809765] attempt to access beyond end of device [ 256.809767] sdc2: rw=0, want=128, limit=2 [ 256.811433] attempt to access beyond end of device [ 256.811437] sdc2: rw=0, want=18, limit=2 [ 256.811442] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 8, size 1024) [ 256.811460] attempt to access beyond end of device [ 256.811462] sdc2: rw=0, want=130, limit=2 [ 256.811472] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 64, size 1024) [ 256.811476] ReiserFS: sdc2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc2 [ 256.813341] attempt to access beyond end of device [ 256.813344] sdc2: rw=0, want=8, limit=2 [ 256.813349] XFS: SB read failed [ 256.816231] FAT: bogus number of reserved sectors [ 256.816234] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 256.817584] attempt to access beyond end of device [ 256.817587] sdc2: rw=0, want=4, limit=2 [ 256.817590] MINIX-fs: unable to read superblock [ 256.818919] attempt to access beyond end of device [ 256.818922] sdc2: rw=0, want=3, limit=2 [ 256.818925] hfs: unable to find HFS+ superblock [ 256.822472] qnx4: wrong fsid in superblock. [ 256.823859] You didn't specify the type of your ufs filesystem [ 256.823860] [ 256.823861] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 256.823862] [ 256.823862] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 256.824072] attempt to access beyond end of device [ 256.824074] sdc2: rw=0, want=18, limit=2 [ 256.825984] attempt to access beyond end of device [ 256.825987] sdc2: rw=0, want=3, limit=2 [ 256.825991] hfs: can't find a HFS filesystem on dev sdc2. [ 256.956020] cramfs: wrong magic [ 256.963950] Unable to identify CD-ROM format. [ 256.972530] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 256.975540] VFS: Can't find ext3 filesystem on dev sda1. [ 256.977165] VFS: Can't find an ext2 filesystem on dev sda1. [ 256.978816] FAT: bogus number of reserved sectors [ 256.978818] VFS: Can't find a valid FAT filesystem on dev sda1. [ 257.002436] NTFS volume version 3.1. [ 257.086317] cramfs: wrong magic [ 257.174167] Unable to identify CD-ROM format. [ 257.177913] SQUASHFS error: Can't find a SQUASHFS superblock on sdb1 [ 257.182904] VFS: Can't find ext3 filesystem on dev sdb1. [ 257.185899] VFS: Can't find an ext2 filesystem on dev sdb1. [ 257.188896] FAT: bogus number of reserved sectors [ 257.188899] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 257.263037] NTFS volume version 3.1. [ 257.440074] cramfs: wrong magic [ 257.442246] attempt to access beyond end of device [ 257.442251] sdc2: rw=0, want=66, limit=2 [ 257.442257] isofs_fill_super: bread failed, dev=sdc2, iso_blknum=16, block=32 [ 257.445494] SQUASHFS error: Can't find a SQUASHFS superblock on sdc2 [ 257.448428] attempt to access beyond end of device [ 257.448432] sdc2: rw=0, want=4, limit=2 [ 257.448434] EXT3-fs: unable to read superblock [ 257.449976] attempt to access beyond end of device [ 257.449978] sdc2: rw=0, want=4, limit=2 [ 257.450145] EXT2-fs: unable to read superblock [ 257.453479] FAT: bogus number of reserved sectors [ 257.453481] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 257.456477] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Primary boot sector is invalid. [ 257.456481] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. [ 257.457840] attempt to access beyond end of device [ 257.457843] sdc2: rw=0, want=72, limit=2 [ 257.457848] attempt to access beyond end of device [ 257.457851] sdc2: rw=0, want=128, limit=2 [ 257.459238] attempt to access beyond end of device [ 257.459242] sdc2: rw=0, want=18, limit=2 [ 257.459247] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 8, size 1024) [ 257.459252] attempt to access beyond end of device [ 257.459256] sdc2: rw=0, want=130, limit=2 [ 257.459259] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 64, size 1024) [ 257.459262] ReiserFS: sdc2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc2 [ 257.461279] attempt to access beyond end of device [ 257.461282] sdc2: rw=0, want=8, limit=2 [ 257.461446] XFS: SB read failed [ 257.464461] FAT: bogus number of reserved sectors [ 257.464463] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 257.466002] attempt to access beyond end of device [ 257.466004] sdc2: rw=0, want=4, limit=2 [ 257.466008] MINIX-fs: unable to read superblock [ 257.467571] attempt to access beyond end of device [ 257.467575] sdc2: rw=0, want=3, limit=2 [ 257.467578] hfs: unable to find HFS+ superblock [ 257.470452] qnx4: wrong fsid in superblock. [ 257.471899] You didn't specify the type of your ufs filesystem [ 257.471901] [ 257.471901] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 257.471902] [ 257.471903] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 257.472356] attempt to access beyond end of device [ 257.472358] sdc2: rw=0, want=18, limit=2 [ 257.473853] attempt to access beyond end of device [ 257.473856] sdc2: rw=0, want=3, limit=2 [ 257.473859] hfs: can't find a HFS filesystem on dev sdc2. [ 257.543020] NTFS volume version 3.1. [ 341.395558] cramfs: wrong magic [ 341.403846] Unable to identify CD-ROM format. [ 341.411576] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 341.414658] VFS: Can't find ext3 filesystem on dev sda1. [ 341.416247] VFS: Can't find an ext2 filesystem on dev sda1. [ 341.417712] FAT: bogus number of reserved sectors [ 341.417715] VFS: Can't find a valid FAT filesystem on dev sda1. [ 341.449835] NTFS volume version 3.1. [ 341.560348] cramfs: wrong magic [ 341.645196] Unable to identify CD-ROM format. [ 341.648942] SQUASHFS error: Can't find a SQUASHFS superblock on sdb1 [ 341.653810] VFS: Can't find ext3 filesystem on dev sdb1. [ 341.656182] VFS: Can't find an ext2 filesystem on dev sdb1. [ 341.658053] FAT: bogus number of reserved sectors [ 341.658057] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 341.732069] NTFS volume version 3.1. [ 341.860614] cramfs: wrong magic [ 341.861987] attempt to access beyond end of device [ 341.861990] sdc2: rw=0, want=66, limit=2 [ 341.861994] isofs_fill_super: bread failed, dev=sdc2, iso_blknum=16, block=32 [ 341.864606] SQUASHFS error: Can't find a SQUASHFS superblock on sdc2 [ 341.867353] attempt to access beyond end of device [ 341.867356] sdc2: rw=0, want=4, limit=2 [ 341.867360] EXT3-fs: unable to read superblock [ 341.868721] attempt to access beyond end of device [ 341.868724] sdc2: rw=0, want=4, limit=2 [ 341.868727] EXT2-fs: unable to read superblock [ 341.871591] FAT: bogus number of reserved sectors [ 341.871594] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 341.873964] printk: 1 messages suppressed. [ 341.873967] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Primary boot sector is invalid. [ 341.873970] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. [ 341.873974] NTFS-fs error (device sdc2): ntfs_fill_super(): Not an NTFS volume. [ 341.875328] attempt to access beyond end of device [ 341.875331] sdc2: rw=0, want=72, limit=2 [ 341.875336] attempt to access beyond end of device [ 341.875339] sdc2: rw=0, want=128, limit=2 [ 341.876716] attempt to access beyond end of device [ 341.876719] sdc2: rw=0, want=18, limit=2 [ 341.876724] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 8, size 1024) [ 341.876729] attempt to access beyond end of device [ 341.876732] sdc2: rw=0, want=130, limit=2 [ 341.876735] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 64, size 1024) [ 341.876739] ReiserFS: sdc2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc2 [ 341.878132] attempt to access beyond end of device [ 341.878135] sdc2: rw=0, want=8, limit=2 [ 341.878140] XFS: SB read failed [ 341.881453] FAT: bogus number of reserved sectors [ 341.881456] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 341.882833] attempt to access beyond end of device [ 341.882836] sdc2: rw=0, want=4, limit=2 [ 341.883000] MINIX-fs: unable to read superblock [ 341.884453] attempt to access beyond end of device [ 341.884456] sdc2: rw=0, want=3, limit=2 [ 341.884459] hfs: unable to find HFS+ superblock [ 341.887565] qnx4: wrong fsid in superblock. [ 341.888962] You didn't specify the type of your ufs filesystem [ 341.888963] [ 341.888964] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 341.888965] [ 341.888965] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 341.889338] attempt to access beyond end of device [ 341.889341] sdc2: rw=0, want=18, limit=2 [ 341.890794] attempt to access beyond end of device [ 341.890797] sdc2: rw=0, want=3, limit=2 [ 341.890810] hfs: can't find a HFS filesystem on dev sdc2. [ 342.023384] cramfs: wrong magic [ 342.031261] Unable to identify CD-ROM format. [ 342.035334] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 342.038404] VFS: Can't find ext3 filesystem on dev sda1. [ 342.040066] VFS: Can't find an ext2 filesystem on dev sda1. [ 342.041762] FAT: bogus number of reserved sectors [ 342.041765] VFS: Can't find a valid FAT filesystem on dev sda1. [ 342.065235] NTFS volume version 3.1. [ 342.155404] cramfs: wrong magic [ 342.242256] Unable to identify CD-ROM format. [ 342.245128] SQUASHFS error: Can't find a SQUASHFS superblock on sdb1 [ 342.249124] VFS: Can't find ext3 filesystem on dev sdb1. [ 342.251242] VFS: Can't find an ext2 filesystem on dev sdb1. [ 342.254987] FAT: bogus number of reserved sectors [ 342.254989] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 342.329135] NTFS volume version 3.1. [ 342.522764] cramfs: wrong magic [ 342.525044] attempt to access beyond end of device [ 342.525048] sdc2: rw=0, want=66, limit=2 [ 342.525053] isofs_fill_super: bread failed, dev=sdc2, iso_blknum=16, block=32 [ 342.528565] SQUASHFS error: Can't find a SQUASHFS superblock on sdc2 [ 342.532989] attempt to access beyond end of device [ 342.532993] sdc2: rw=0, want=4, limit=2 [ 342.533011] EXT3-fs: unable to read superblock [ 342.535627] attempt to access beyond end of device [ 342.535632] sdc2: rw=0, want=4, limit=2 [ 342.535635] EXT2-fs: unable to read superblock [ 342.539542] FAT: bogus number of reserved sectors [ 342.539547] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 342.543539] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Primary boot sector is invalid. [ 342.543544] NTFS-fs error (device sdc2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. [ 342.543548] NTFS-fs error (device sdc2): ntfs_fill_super(): Not an NTFS volume. [ 342.546598] attempt to access beyond end of device [ 342.546603] sdc2: rw=0, want=72, limit=2 [ 342.546629] attempt to access beyond end of device [ 342.546632] sdc2: rw=0, want=128, limit=2 [ 342.549180] attempt to access beyond end of device [ 342.549185] sdc2: rw=0, want=18, limit=2 [ 342.549191] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 8, size 1024) [ 342.549218] attempt to access beyond end of device [ 342.549223] sdc2: rw=0, want=130, limit=2 [ 342.549233] ReiserFS: sdc2: warning: sh-2006: read_super_block: bread failed (dev sdc2, block 64, size 1024) [ 342.549238] ReiserFS: sdc2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc2 [ 342.552601] attempt to access beyond end of device [ 342.552606] sdc2: rw=0, want=8, limit=2 [ 342.552617] XFS: SB read failed [ 342.555642] FAT: bogus number of reserved sectors [ 342.555645] VFS: Can't find a valid FAT filesystem on dev sdc2. [ 342.558074] attempt to access beyond end of device [ 342.558079] sdc2: rw=0, want=4, limit=2 [ 342.558083] MINIX-fs: unable to read superblock [ 342.560553] attempt to access beyond end of device [ 342.560557] sdc2: rw=0, want=3, limit=2 [ 342.560561] hfs: unable to find HFS+ superblock [ 342.564378] qnx4: wrong fsid in superblock. [ 342.566598] You didn't specify the type of your ufs filesystem [ 342.566600] [ 342.566601] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 342.566603] [ 342.566603] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 342.566612] attempt to access beyond end of device [ 342.566617] sdc2: rw=0, want=18, limit=2 [ 342.569533] attempt to access beyond end of device [ 342.569538] sdc2: rw=0, want=3, limit=2 [ 342.569542] hfs: can't find a HFS filesystem on dev sdc2. [ 342.647406] NTFS volume version 3.1.