dbasinge@tardis:~$ tail -2 /proc/asound/oss/sndstat
Mixers:
0: SigmaTel STAC9221 A1

dbasinge@tardis:~$ amixer
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 216 [85%] [-7.80dB]
  Front Right: Playback 216 [85%] [-7.80dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 102 [80%] [-18.75dB] [on]
  Front Right: Playback 102 [80%] [-18.75dB] [on]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 127 [100%] [0.00dB] [off]
  Front Right: Playback 127 [100%] [0.00dB] [off]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 127
  Mono: Playback 127 [100%] [0.00dB] [off]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 127
  Mono: Playback 127 [100%] [0.00dB] [off]
Simple mixer control 'Side',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 105 [83%] [-16.50dB] [on]
  Front Right: Playback 105 [83%] [-16.50dB] [on]
Simple mixer control 'Line In as Output',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 14
  Front Left: Capture 8 [57%] [12.00dB] [off]
  Front Right: Capture 8 [57%] [12.00dB] [off]
Simple mixer control 'Input Source',0
  Capabilities: enum
  Items: 'Mic' 'Front Mic' 'Line'
  Item0: 'Front Mic'
Simple mixer control 'Mux',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 4
  Front Left: Capture 0 [0%] [0.00dB]
  Front Right: Capture 0 [0%] [0.00dB]
dbasinge@tardis:~$ lspci -nv
00:00.0 0600: 8086:27a0 (rev 03)
        Subsystem: 8086:7270
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>

00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: 90300000-903fffff
        Prefetchable memory behind bridge: 0000000080000000-0000000087ffffff
        Capabilities: <access denied>

00:07.0 1101: 8086:27a3 (rev 03)
        Flags: 66MHz, fast devsel, IRQ 10
        Memory at 90404000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:1b.0 0403: 8086:27d8 (rev 02)
        Subsystem: 8384:7680
        Flags: bus master, fast devsel, latency 0, IRQ 21
        Memory at 90400000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: 90200000-902fffff
        Prefetchable memory behind bridge: 0000000068000000-00000000680fffff
        Capabilities: <access denied>

00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: 90100000-901fffff
        Capabilities: <access denied>

00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: 8c100000-900fffff
        Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
        Capabilities: <access denied>

00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 8086:7270
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 40a0 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 8086:7270
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 4080 [size=32]

00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
        Subsystem: 8086:7270
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 4060 [size=32]

00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
        Subsystem: 8086:7270
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at 4040 [size=32]

00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
        Subsystem: 8086:7270
        Flags: bus master, medium devsel, latency 0, IRQ 19
        Memory at 90405400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=32
        Memory behind bridge: 8c000000-8c0fffff
        Capabilities: <access denied>

00:1f.0 0601: 8086:27b9 (rev 02)
        Subsystem: 8086:7270
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>

00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: 8086:7270
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 40c0 [size=16]

00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 8086:7270
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at 40d8 [size=8]
        I/O ports at 40f4 [size=4]
        I/O ports at 40d0 [size=8]
        I/O ports at 40f0 [size=4]
        I/O ports at 4020 [size=16]
        Memory at 90405000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1f.3 0c05: 8086:27da (rev 02)
        Subsystem: 8086:7270
        Flags: medium devsel, IRQ 11
        I/O ports at efa0 [size=32]

01:00.0 0300: 1002:71c5 (prog-if 00 [VGA])
        Subsystem: 106b:0080
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at 80000000 (32-bit, prefetchable) [size=128M]
        I/O ports at 3000 [size=256]
        Memory at 90300000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at 90320000 [disabled] [size=128K]
        Capabilities: <access denied>

02:00.0 0200: 11ab:4362 (rev 22)
        Subsystem: 11ab:5321
        Flags: bus master, fast devsel, latency 0, IRQ 219
        Memory at 90200000 (64-bit, non-prefetchable) [size=16K]
        I/O ports at 2000 [size=256]
        Expansion ROM at 68000000 [disabled] [size=128K]
        Capabilities: <access denied>

03:00.0 0200: 168c:001c (rev 01)
        Subsystem: 106b:0086
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at 90100000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>

0c:03.0 0c00: 11c1:5811 (rev 61) (prog-if 10 [OHCI])
        Subsystem: 11c1:5811
        Flags: bus master, fast Back2Back, medium devsel, latency 248, IRQ 20
        Memory at 8c000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

dbasinge@tardis:~$ asoundconf list
Names of available sound cards:
Intel

dbasinge@tardis:~$ cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /home/dbasinge/.asoundrc*: No such file or directory

dmesg
[    0.000000] Linux version 2.6.20-8-generic (root@vernadsky) (gcc version 4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 05:18:42 UTC 2007 (Ubuntu 2.6.20-8.14-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000ede00 size: 0000000000012200 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000005efc7000 end: 000000005f0c7000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000005f0c7000 size: 0000000000201000 end: 000000005f2c8000 type: 4
[    0.000000] copy_e820_map() start: 000000005f2c8000 size: 0000000000bf1000 end: 000000005feb9000 type: 3
[    0.000000] copy_e820_map() start: 000000005feb9000 size: 0000000000036000 end: 000000005feef000 type: 4
[    0.000000] copy_e820_map() start: 000000005feef000 size: 0000000000011000 end: 000000005ff00000 type: 3
[    0.000000] copy_e820_map() start: 000000005ff00000 size: 0000000000100000 end: 0000000060000000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000004000 end: 00000000fed20000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ffe00000 size: 0000000000200000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005f0c7000 (usable)
[    0.000000]  BIOS-e820: 000000005f0c7000 - 000000005f2c8000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005f2c8000 - 000000005feb9000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005feb9000 - 000000005feef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005feef000 - 000000005ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005ff00000 - 0000000060000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] 624MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 389319) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   389319
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   389319
[    0.000000] On node 0 totalpages: 389319
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1249 pages used for memmap
[    0.000000]   HighMem zone: 158694 pages, LIFO batch:31
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP (v002 APPLE                                 ) @ 0x000fe020
[    0.000000] ACPI: XSDT (v001 APPLE   Apple00 0x00000055      0x01000013) @ 0x5fefd120
[    0.000000] ACPI: FADT (v003 APPLE   Apple00 0x00000055 Loki 0x0000005f) @ 0x5fefb000
[    0.000000] ACPI: HPET (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x5fefa000
[    0.000000] ACPI: MADT (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x5fef9000
[    0.000000] ACPI: MCFG (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x5fef8000
[    0.000000] ACPI: ASF! (v032 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x5fef7000
[    0.000000] ACPI: SBST (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x5fef6000
[    0.000000] ACPI: ECDT (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x5fef5000
[    0.000000] ACPI: SSDT (v001 APPLE   SataPri 0x00001000 INTL 0x20050309) @ 0x5feb6000
[    0.000000] ACPI: SSDT (v001 APPLE   SataSec 0x00001000 INTL 0x20050309) @ 0x5feb5000
[    0.000000] ACPI: SSDT (v001 APPLE     CpuPm 0x00003000 INTL 0x20050309) @ 0x5feef000
[    0.000000] ACPI: DSDT (v001 APPLE  MacBookP 0x00010001 INTL 0x20050309) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:14 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
[    0.000000] Detected 2129.748 MHz processor.
[   22.188874] Built 1 zonelists.  Total pages: 386278
[   22.188877] Kernel command line: root=UUID=58d66f13-0614-4862-9401-a0f7c7c66ad7 ro quiet splash
[   22.189004] mapped APIC to ffffd000 (fee00000)
[   22.189006] mapped IOAPIC to ffffc000 (fec00000)
[   22.189009] Enabling fast FPU save and restore... done.
[   22.189011] Enabling unmasked SIMD FPU exception support... done.
[   22.189018] Initializing CPU#0
[   22.189083] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   22.191491] Console: colour VGA+ 80x25
[   22.191717] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   22.192013] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   22.272257] Memory: 1532628k/1557276k available (1979k kernel code, 23368k reserved, 882k data, 324k init, 639772k highmem)
[   22.272265] virtual kernel memory layout:
[   22.272266]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   22.272267]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   22.272268]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   22.272269]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   22.272271]       .init : 0xc03d1000 - 0xc0422000   ( 324 kB)
[   22.272272]       .data : 0xc02eecb4 - 0xc03cb6d4   ( 882 kB)
[   22.272273]       .text : 0xc0100000 - 0xc02eecb4   (1979 kB)
[   22.272275] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   22.272425] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   22.272430] hpet0: 3 64-bit timers, 14318180 Hz
[   22.273371] Using HPET for base-timer
[   22.347328] Calibrating delay using timer specific routine.. 3999.04 BogoMIPS (lpj=7998098)
[   22.347363] Security Framework v1.0.0 initialized
[   22.347371] SELinux:  Disabled at boot.
[   22.347384] Mount-cache hash table entries: 512
[   22.347502] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[   22.347509] monitor/mwait feature present.
[   22.347511] using mwait in idle threads.
[   22.347514] CPU: L1 I cache: 32K, L1 D cache: 32K
[   22.347516] CPU: L2 cache: 2048K
[   22.347518] CPU: Physical Processor ID: 0
[   22.347520] CPU: Processor Core ID: 0
[   22.347522] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[   22.347539] Checking 'hlt' instruction... OK.
[   22.362406] SMP alternatives: switching to UP code
[   22.362656] ACPI: Core revision 20060707
[   22.367162] CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
[   22.367182] SMP alternatives: switching to SMP code
[   22.367208] Booting processor 1/1 eip 3000
[   22.377166] Initializing CPU#1
[   22.452186] Calibrating delay using timer specific routine.. 3994.80 BogoMIPS (lpj=7989608)
[   22.452192] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[   22.452196] monitor/mwait feature present.
[   22.452199] CPU: L1 I cache: 32K, L1 D cache: 32K
[   22.452201] CPU: L2 cache: 2048K
[   22.452202] CPU: Physical Processor ID: 0
[   22.452204] CPU: Processor Core ID: 1
[   22.452205] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[   22.452576] CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
[   22.452596] Total of 2 processors activated (7993.85 BogoMIPS).
[   22.452778] ENABLING IO-APIC IRQs
[   22.452965] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   22.590749] checking TSC synchronization across 2 CPUs: passed.
[    0.003748] Brought up 2 CPUs
[    0.181871] migration_cost=38
[    0.182104] Booting paravirtualized kernel on bare hardware
[    0.182192] Time: 20:42:30  Date: 01/19/107
[    0.182216] NET: Registered protocol family 16
[    0.182284] EISA bus registered
[    0.182288] ACPI: bus type pci registered
[    0.182295] PCI: Using MMCONFIG
[    0.182934] Setting up standard PCI resources
[    0.188214] ACPI: Interpreter enabled
[    0.188216] ACPI: Using IOAPIC for interrupt routing
[    0.188671] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.188677] PCI: Probing PCI hardware (bus 00)
[    0.189710] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.189713] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[    0.189943] Boot video device is 0000:01:00.0
[    0.190478] PCI: Transparent bridge - 0000:00:1e.0
[    0.190537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.196515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.197054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.197256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.197458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.198653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.199318] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.199502] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.199687] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.199870] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.200053] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.200237] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.200421] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.200605] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.206005] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.206012] pnp: PnP ACPI init
[    0.209553] pnp: PnP ACPI: found 10 devices
[    0.209556] PnPBIOS: Disabled by ACPI PNP
[    0.209619] PCI: Using ACPI for IRQ routing
[    0.209621] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.210266] PCI: Bridge: 0000:00:01.0
[    0.210268]   IO window: 3000-3fff
[    0.210271]   MEM window: 90300000-903fffff
[    0.210274]   PREFETCH window: 80000000-87ffffff
[    0.210276] PCI: Bridge: 0000:00:1c.0
[    0.210279]   IO window: 2000-2fff
[    0.210283]   MEM window: 90200000-902fffff
[    0.210287]   PREFETCH window: 68000000-680fffff
[    0.210292] PCI: Bridge: 0000:00:1c.1
[    0.210293]   IO window: disabled.
[    0.210298]   MEM window: 90100000-901fffff
[    0.210301]   PREFETCH window: disabled.
[    0.210305] PCI: Bridge: 0000:00:1c.2
[    0.210308]   IO window: 1000-1fff
[    0.210313]   MEM window: 8c100000-900fffff
[    0.210316]   PREFETCH window: 88000000-8bffffff
[    0.210321] PCI: Bridge: 0000:00:1e.0
[    0.210322]   IO window: disabled.
[    0.210327]   MEM window: 8c000000-8c0fffff
[    0.210330]   PREFETCH window: disabled.
[    0.210341] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.210345] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.210362] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.210367] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.210384] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[    0.210388] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.210406] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.210410] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.210421] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.210444] NET: Registered protocol family 2
[    0.254699] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.254786] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.255367] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.255665] TCP: Hash tables configured (established 131072 bind 65536)
[    0.255667] TCP reno registered
[    0.269757] checking if image is initramfs... it is
[    0.777477] Freeing initrd memory: 6668k freed
[    0.778020] audit: initializing netlink socket (disabled)
[    0.778034] audit(1171917751.248:1): initialized
[    0.778112] highmem bounce pool size: 64 pages
[    0.778184] VFS: Disk quotas dquot_6.5.1
[    0.778205] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.778247] io scheduler noop registered
[    0.778250] io scheduler anticipatory registered
[    0.778252] io scheduler deadline registered
[    0.778261] io scheduler cfq registered (default)
[    0.778563] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.778579] assign_interrupt_mode Found MSI capability
[    0.778602] Allocate Port Service[0000:00:01.0:pcie00]
[    0.778634] Allocate Port Service[0000:00:01.0:pcie03]
[    0.778693] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.778738] assign_interrupt_mode Found MSI capability
[    0.778769] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.778796] Allocate Port Service[0000:00:1c.0:pcie02]
[    0.778823] Allocate Port Service[0000:00:1c.0:pcie03]
[    0.778914] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.778966] assign_interrupt_mode Found MSI capability
[    0.778997] Allocate Port Service[0000:00:1c.1:pcie00]
[    0.779025] Allocate Port Service[0000:00:1c.1:pcie02]
[    0.779050] Allocate Port Service[0000:00:1c.1:pcie03]
[    0.779145] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.779187] assign_interrupt_mode Found MSI capability
[    0.779218] Allocate Port Service[0000:00:1c.2:pcie00]
[    0.779245] Allocate Port Service[0000:00:1c.2:pcie02]
[    0.779272] Allocate Port Service[0000:00:1c.2:pcie03]
[    0.779417] isapnp: Scanning for PnP cards...
[    1.111242] isapnp: No Plug & Play device found
[    1.130268] Real Time Clock Driver v1.12ac
[    1.130323] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.130833] mice: PS/2 mouse device common for all mice
[    1.131306] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.131389] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.131392] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.131685] PNP: No PS/2 controller found. Probing ports directly.
[    1.132485] i8042.c: No controller found.
[    1.132546] EISA: Probing bus 0 at eisa.0
[    1.132552] Cannot allocate resource for EISA slot 1
[    1.132554] Cannot allocate resource for EISA slot 2
[    1.132556] Cannot allocate resource for EISA slot 3
[    1.132558] Cannot allocate resource for EISA slot 4
[    1.132575] EISA: Detected 0 cards.
[    1.160754] TCP cubic registered
[    1.160762] NET: Registered protocol family 1
[    1.160766] NET: Registered protocol family 8
[    1.160768] NET: Registered protocol family 20
[    1.160799] Starting balanced_irq
[    1.160809] Using IPI No-Shortcut mode
[    1.160895] ACPI: (supports S0 S3 S4 S5)
[    1.160935]   Magic number: 11:209:751
[    1.160937]   hash matches device ttyS2
[    1.160950] Time: tsc clocksource has been installed.
[    1.161188] Freeing unused kernel memory: 324k freed
[    2.323023] Capability LSM initialized
[    2.347762] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu0Ist] [20060707]
[    2.347931] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu0Cst] [20060707]
[    2.348190] Monitor-Mwait will be used to enter C-1 state
[    2.348193] Monitor-Mwait will be used to enter C-2 state
[    2.348195] Monitor-Mwait will be used to enter C-3 state
[    2.348201] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.348205] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.348593] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu1Ist] [20060707]
[    2.348741] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu1Cst] [20060707]
[    2.349023] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    2.349027] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.752000] Time: hpet clocksource has been installed.
[    3.052000] usbcore: registered new interface driver usbfs
[    3.052000] usbcore: registered new interface driver hub
[    3.052000] usbcore: registered new device driver usb
[    3.052000] USB Universal Host Controller Interface driver v3.0
[    3.052000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[    3.052000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.052000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.052000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.052000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x000040a0
[    3.052000] usb usb1: configuration #1 chosen from 1 choice
[    3.052000] hub 1-0:1.0: USB hub found
[    3.052000] hub 1-0:1.0: 2 ports detected
[    3.072000] ieee1394: Initialized config rom entry `ip1394'
[    3.108000] SCSI subsystem initialized
[    3.120000] libata version 2.00 loaded.
[    3.156000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[    3.156000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.156000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.156000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.156000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004080
[    3.156000] usb usb2: configuration #1 chosen from 1 choice
[    3.156000] hub 2-0:1.0: USB hub found
[    3.156000] hub 2-0:1.0: 2 ports detected
[    3.260000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.260000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.260000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.260000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.260000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[    3.260000] usb usb3: configuration #1 chosen from 1 choice
[    3.260000] hub 3-0:1.0: USB hub found
[    3.260000] hub 3-0:1.0: 2 ports detected
[    3.364000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    3.364000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.364000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.364000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.364000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
[    3.364000] usb usb4: configuration #1 chosen from 1 choice
[    3.364000] hub 4-0:1.0: USB hub found
[    3.364000] hub 4-0:1.0: 2 ports detected
[    3.396000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[    3.468000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[    3.468000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.468000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.468000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.468000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.468000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.468000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90405400
[    3.472000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.472000] usb usb5: configuration #1 chosen from 1 choice
[    3.472000] hub 5-0:1.0: USB hub found
[    3.472000] hub 5-0:1.0: 8 ports detected
[    3.576000] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 20
[    3.628000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[8c000000-8c0007ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    3.636000] ata_piix 0000:00:1f.1: version 2.00ac7
[    3.636000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    3.636000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    3.636000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x40C0 irq 14
[    3.640000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x40C8 irq 15
[    3.640000] scsi0 : ata_piix
[    3.928000] usb 1-2: device not accepting address 2, error -71
[    3.960000] ata1.00: ATAPI, max UDMA/66
[    4.124000] ata1.00: configured for UDMA/66
[    4.124000] scsi1 : ata_piix
[    4.288000] ATA: abnormal status 0x7F on port 0x177
[    4.292000] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857   HAE4 PQ: 0 ANSI: 5
[    4.292000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[    4.292000] ata_piix 0000:00:1f.2: invalid MAP value 0
[    4.448000] PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
[    4.448000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[    4.448000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.448000] ata3: SATA max UDMA/133 cmd 0x40D8 ctl 0x40F6 bmdma 0x4020 irq 20
[    4.448000] ata4: SATA max UDMA/133 cmd 0x40D0 ctl 0x40F2 bmdma 0x4028 irq 20
[    4.448000] scsi2 : ata_piix
[    4.612000] ATA: abnormal status 0x7F on port 0x40DF
[    4.624000] ATA: abnormal status 0x7F on port 0x40DF
[    4.644000] ata3.01: ATA-7, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 0/32)
[    4.644000] ata3.01: ata3: dev 1 multi count 16
[    4.668000] ata3.01: configured for UDMA/100
[    4.668000] scsi3 : ata_piix
[    4.832000] ATA: abnormal status 0x7F on port 0x40D7
[    4.832000] scsi 2:0:1:0: Direct-Access     ATA      FUJITSU MHV2100B 0081 PQ: 0 ANSI: 5
[    4.844000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[    4.844000] sda: Write Protect is off
[    4.844000] sda: Mode Sense: 00 3a 00 00
[    4.844000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.844000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[    4.844000] sda: Write Protect is off
[    4.844000] sda: Mode Sense: 00 3a 00 00
[    4.844000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.844000]  sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.852000] Uniform CD-ROM driver Revision: 3.20
[    4.852000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.908000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0016cbfffe58ecb6]
[    4.964000]  sda1 sda2 sda3 sda4
[    4.964000] sd 2:0:1:0: Attached scsi disk sda
[    4.968000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    4.968000] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    5.104000] usb 5-4: new high speed USB device using ehci_hcd and address 4
[    5.236000] usb 5-4: configuration #1 chosen from 1 choice
[    5.264000] Attempting manual resume
[    5.264000] swsusp: Resume From Partition 8:4
[    5.264000] PM: Checking swsusp image.
[    5.264000] PM: Resume from disk failed.
[    5.300000] kjournald starting.  Commit interval 5 seconds
[    5.300000] EXT3-fs: mounted filesystem with ordered data mode.
[    5.844000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    6.024000] usb 2-1: configuration #1 chosen from 1 choice
[    6.268000] usb 1-2: new full speed USB device using uhci_hcd and address 4
[    6.460000] usb 1-2: configuration #1 chosen from 1 choice
[    6.712000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    6.896000] usb 3-2: configuration #1 chosen from 1 choice
[    7.136000] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    7.316000] usb 4-1: configuration #1 chosen from 1 choice
[   14.968000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.972000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.108000] intel_rng: FWH not detected
[   15.116000] ath_hal: module license 'Proprietary' taints kernel.
[   15.116000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[   15.272000] Linux agpgart interface v0.101 (c) Dave Jones
[   15.280000] agpgart: Detected an Intel 945GM Chipset.
[   15.296000] agpgart: AGP aperture is 256M @ 0x0
[   15.300000] tpm_inf_pnp 00:03: Found TPM with ID IFX0101
[   15.300000] tpm_inf_pnp 00:03: TPM found: config base 0x4e, io base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[   15.312000] iTCO_vendor_support: vendor-support=0
[   15.312000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   15.312000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[   15.312000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.524000] appletouch Geyser 3 inited.
[   15.524000] input: appletouch as /class/input/input0
[   15.524000] usbcore: registered new interface driver appletouch
[   15.588000] wlan: 0.8.4.2 (0.9.3)
[   15.628000] ath_pci: 0.9.4.5 (0.9.3)
[   15.628000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   15.628000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   16.172000] Linux video capture interface: v2.00
[   16.236000] ath_rate_sample: 1.2 (0.9.3)
[   16.236000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[   16.236000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[   16.236000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[   16.236000] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[   16.236000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[   16.236000] wifi0: mac 10.3 phy 6.1 radio 10.2
[   16.236000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[   16.236000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[   16.236000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[   16.236000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[   16.236000] wifi0: Use hw queue 8 for CAB traffic
[   16.236000] wifi0: Use hw queue 9 for beacons
[   16.272000] wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
[   16.272000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   16.272000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   16.272000] sky2 v1.10 addr 0x90200000 irq 16 Yukon-EC (0xb6) rev 2
[   16.272000] sky2 eth0: addr 00:16:cb:9a:58:29
[   16.300000] sky2 eth0: enabling interface
[   16.304000] sky2 eth0: ram buffer 48K
[   16.356000] uvcvideo: Found UVC 0.00 device <unnamed> (05ac:8300)
[   16.356000] uvcvideo: No valid video chain found.
[   16.396000] uvcvideo: Possible an Apple iSight without firmware loaded; please read the documentation, load the firmware and re-load the driver.<6>usbcore: registered new interface driver uvcvideo
[   16.396000] USB Video Class driver (v0.1.0-c)
[   16.704000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   16.704000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   17.628000] NET: Registered protocol family 17
[   18.068000] hda_intel: azx_get_response timeout, switching to polling mode...
[   18.256000] usbcore: registered new interface driver hiddev
[   18.372000] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input1
[   18.372000] input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1
[   18.376000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input2
[   18.376000] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[   18.380000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input3
[   18.380000] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[   18.472000] hiddev96: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[   18.580000] input: HID 05ac:1000 as /class/input/input4
[   18.580000] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[   18.596000] input: HID 05ac:1000 as /class/input/input5
[   18.596000] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[   18.596000] usbcore: registered new interface driver usbhid
[   18.596000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   18.672000] usbcore: registered new interface driver appleir
[   18.672000] ubuntu/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver
[   18.912000] fuse init (API version 7.8)
[   18.972000] lp: driver loaded but no devices found
[   19.032000] Adding 2047748k swap on /dev/disk/by-uuid/a0ff4fb8-29c3-4798-9eeb-5ec3def0a860.  Priority:-1 extents:1 across:2047748k
[   19.188000] EXT3 FS on sda3, internal journal
[   23.248000] Using specific hotkey driver
[   23.276000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   23.288000] No dock devices found.
[   23.300000] ACPI: AC Adapter [ADP1] (on-line)
[   23.348000] ibm_acpi: ec object not found
[   23.432000] ACPI: Battery Slot [BAT0] (battery present)
[   23.484000] input: Power Button (FF) as /class/input/input6
[   23.484000] ACPI: Power Button (FF) [PWRF]
[   23.484000] input: Lid Switch as /class/input/input7
[   23.484000] ACPI: Lid Switch [LID0]
[   23.484000] input: Power Button (CM) as /class/input/input8
[   23.484000] ACPI: Power Button (CM) [PWRB]
[   23.484000] input: Sleep Button (CM) as /class/input/input9
[   23.484000] ACPI: Sleep Button (CM) [SLPB]
[   25.344000] ppdev: user-space parallel port driver
[   27.668000] [fglrx] Maximum main memory to use for locked dma buffers: 1400 MBytes.
[   27.668000] [fglrx] module loaded - fglrx 8.33.6 [Jan  8 2007] on minor 0
[   27.696000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   27.920000] apm: BIOS not found.
[   28.796000] [fglrx] total      GART = 130023424
[   28.796000] [fglrx] free       GART = 114032640
[   28.796000] [fglrx] max single GART = 114032640
[   28.796000] [fglrx] total      LFB  = 134086656
[   28.796000] [fglrx] free       LFB  = 115871744
[   28.796000] [fglrx] max single LFB  = 115871744
[   28.796000] [fglrx] total      Inv  = 0
[   28.796000] [fglrx] free       Inv  = 0
[   28.796000] [fglrx] max single Inv  = 0
[   28.796000] [fglrx] total      TIM  = 0
[   30.644000] appletouch: incomplete data package (first byte: 2, length: 4).
[   32.580000] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[   32.612000] usb 4-1: USB disconnect, address 2
[   32.624000] Bluetooth: Core ver 2.11
[   32.624000] NET: Registered protocol family 31
[   32.624000] Bluetooth: HCI device and connection manager initialized
[   32.624000] Bluetooth: HCI socket layer initialized
[   32.668000] Bluetooth: L2CAP ver 2.8
[   32.668000] Bluetooth: L2CAP socket layer initialized
[   32.672000] Bluetooth: RFCOMM socket layer initialized
[   32.672000] Bluetooth: RFCOMM TTY layer initialized
[   32.672000] Bluetooth: RFCOMM ver 1.8
[   33.356000] usb 4-1: new full speed USB device using uhci_hcd and address 3
[   33.556000] usb 4-1: configuration #1 chosen from 1 choice
[   33.680000] Bluetooth: HCI USB driver ver 2.9
[   33.684000] usbcore: registered new interface driver hci_usb
[   43.696000] NET: Registered protocol family 10
[   43.696000] lo: Disabled Privacy Extensions
[   43.696000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   54.584000] ath0: no IPv6 routers present
[   72.912000] ath0: no IPv6 routers present
[  989.684000] [fglrx] PCIe has already been initialized. Reinitializing ...
[  989.700000] [fglrx] total      GART = 130023424
[  989.700000] [fglrx] free       GART = 114032640
[  989.700000] [fglrx] max single GART = 114032640
[  989.700000] [fglrx] total      LFB  = 134086656
[  989.700000] [fglrx] free       LFB  = 115871744
[  989.700000] [fglrx] max single LFB  = 115871744
[  989.700000] [fglrx] total      Inv  = 0
[  989.700000] [fglrx] free       Inv  = 0
[  989.700000] [fglrx] max single Inv  = 0
[  989.700000] [fglrx] total      TIM  = 0

dbasinge@tardis:~$ cat /proc/interrupts
           CPU0       CPU1       
  0:    1824393          0   IO-APIC-edge      timer
  8:         67          0   IO-APIC-edge      rtc
  9:      35142          0   IO-APIC-fasteoi   acpi
 14:      79622          0   IO-APIC-edge      libata
 15:          0          0   IO-APIC-edge      libata
 16:    1044212          0   IO-APIC-fasteoi   uhci_hcd:usb4, fglrx
 17:     457795          0   IO-APIC-fasteoi   wifi0
 18:         43          0   IO-APIC-fasteoi   uhci_hcd:usb3
 19:     909441          0   IO-APIC-fasteoi   uhci_hcd:usb1, ehci_hcd:usb5
 20:      75217          0   IO-APIC-fasteoi   uhci_hcd:usb2, ohci1394, libata
 21:      12047          0   IO-APIC-fasteoi   HDA Intel
219:          1          0   PCI-MSI-edge      eth0
NMI:          0          0 
LOC:    1824334    1824330 
ERR:          0
MIS:          0