[ 0.000000] Linux version 2.6.20-5-generic (root@yellow) (gcc version 4.1.2 20070105 (prerelease) (Ubuntu 4.1.1-21ubuntu6)) #2 SMP Sat Jan 6 09:44:32 UTC 2007 (Ubuntu 2.6.20-5.7-generic) [ 0.000000] Command line: root=UUID=8511282e-98ab-4aeb-812d-3795f629210d ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable) [ 0.000000] BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff10000 (usable) [ 0.000000] BIOS-e820: 000000007ff10000 - 000000007ff19000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff19000 - 000000007ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524048) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7680 [ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000007ff15081 [ 0.000000] ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0x000000007ff18bf0 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000007ff18c64 [ 0.000000] ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x000000007ff18eee [ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000007ff18f3e [ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000007ff18f7a [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000007ff18fd8 [ 0.000000] ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007ff10000 [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524048) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff10000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 155 [ 0.000000] 0: 256 -> 524048 [ 0.000000] On node 0 totalpages: 523947 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1075 pages reserved [ 0.000000] DMA zone: 2864 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512844 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009b000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000d6000 [ 0.000000] Nosave address range: 00000000000d6000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515708 [ 0.000000] Kernel command line: root=UUID=8511282e-98ab-4aeb-812d-3795f629210d ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 35.891266] Console: colour VGA+ 80x25 [ 35.892149] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 35.893275] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 35.893433] Checking aperture... [ 35.893436] CPU 0: aperture @ 3cfa000000 size 32 MB [ 35.893437] Aperture too small (32 MB) [ 35.899345] No AGP bridge found [ 35.913359] Memory: 2052800k/2096192k available (2196k kernel code, 42988k reserved, 1135k data, 300k init) [ 35.991787] Calibrating delay using timer specific routine.. 5204.22 BogoMIPS (lpj=10408454) [ 35.991831] Security Framework v1.0.0 initialized [ 35.991835] SELinux: Disabled at boot. [ 35.991854] Mount-cache hash table entries: 256 [ 35.991965] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 35.991967] CPU: L2 Cache: 1024K (64 bytes/line) [ 35.991969] CPU 0/0 -> Node 0 [ 35.991971] CPU: Physical Processor ID: 0 [ 35.991972] CPU: Processor Core ID: 0 [ 35.991990] SMP alternatives: switching to UP code [ 35.992130] ACPI: Core revision 20060707 [ 35.994071] ACPI Warning (utinit-0077): Invalid FADT value PM2_CNT_LEN=0 at offset 5A FADT=ffff810037902dc0 [20060707] [ 36.038257] Using local APIC timer interrupts. [ 36.076638] result 12500070 [ 36.076639] Detected 12.500 MHz APIC timer. [ 36.079776] SMP alternatives: switching to SMP code [ 36.079812] Booting processor 1/2 APIC 0x1 [ 36.090074] Initializing CPU#1 [ 36.167411] Calibrating delay using timer specific routine.. 5200.45 BogoMIPS (lpj=10400903) [ 36.167416] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 36.167418] CPU: L2 Cache: 1024K (64 bytes/line) [ 36.167420] CPU 1/1 -> Node 0 [ 36.167421] CPU: Physical Processor ID: 0 [ 36.167422] CPU: Processor Core ID: 1 [ 36.167515] Dual-Core AMD Opteron(tm) Processor 1218 stepping 02 [ 36.171416] CPU 1: Syncing TSC to CPU 0. [ 36.171503] CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 601 cycles) [ 36.171511] Brought up 2 CPUs [ 36.171581] testing NMI watchdog ... OK. [ 36.211533] Disabling vsyscall due to use of PM timer [ 36.211535] time.c: Using 3.579545 MHz WALL PM GTOD PM timer. [ 36.211536] time.c: Detected 2600.011 MHz processor. [ 36.826828] migration_cost=264 [ 36.827088] NET: Registered protocol family 16 [ 36.827153] ACPI: bus type pci registered [ 36.829556] PCI: Using MMCONFIG at e0000000 [ 36.829575] PCI: No mmconfig possible on device 00:18 [ 36.829721] PCI: No mmconfig possible on device 07:00 [ 36.832612] ACPI: Interpreter enabled [ 36.832614] ACPI: Using IOAPIC for interrupt routing [ 36.833019] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 36.833022] PCI: Probing PCI hardware (bus 00) [ 36.833082] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 36.834010] Boot video device is 0000:07:00.0 [ 36.834064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 36.855675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 36.857243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 36.857369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 36.857495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 36.857625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT] [ 36.857751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR4._PRT] [ 36.857879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT] [ 36.858364] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *10 [ 36.858635] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *11 [ 36.858904] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *10 [ 36.859172] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled. [ 36.859444] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 19) *0, disabled. [ 36.859715] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 19) *10 [ 36.859985] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 19) *0, disabled. [ 36.860253] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 19) *0, disabled. [ 36.860523] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. [ 36.860792] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *10 [ 36.861062] ACPI: PCI Interrupt Link [LMA2] (IRQs 20 21 22 23) *11 [ 36.861331] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *5 [ 36.861608] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 36.861880] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 36.862155] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. [ 36.862425] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *11 [ 36.862699] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *7 [ 36.862970] ACPI: PCI Interrupt Link [LSI2] (IRQs 20 21 22 23) *0, disabled. [ 36.863032] Linux Plug and Play Support v0.97 (c) Adam Belay [ 36.863042] pnp: PnP ACPI init [ 36.865033] pnp: PnP ACPI: found 9 devices [ 36.865078] PCI: Using ACPI for IRQ routing [ 36.865080] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 36.865534] pnp: 00:03: ioport range 0x1000-0x107f could not be reserved [ 36.865537] pnp: 00:03: ioport range 0x1080-0x10ff has been reserved [ 36.865539] pnp: 00:03: ioport range 0x1400-0x147f has been reserved [ 36.865541] pnp: 00:03: ioport range 0x1480-0x14ff has been reserved [ 36.865544] pnp: 00:03: ioport range 0x1800-0x187f has been reserved [ 36.865546] pnp: 00:03: ioport range 0x1880-0x18ff has been reserved [ 36.865549] pnp: 00:03: ioport range 0x3040-0x307f has been reserved [ 36.865551] pnp: 00:03: ioport range 0x3000-0x303f has been reserved [ 36.865754] PCI: Bridge: 0000:00:06.0 [ 36.865755] IO window: 4000-4fff [ 36.865758] MEM window: c0100000-c01fffff [ 36.865759] PREFETCH window: disabled. [ 36.865761] PCI: Bridge: 0000:00:0a.0 [ 36.865762] IO window: disabled. [ 36.865763] MEM window: disabled. [ 36.865765] PREFETCH window: disabled. [ 36.865766] PCI: Bridge: 0000:00:0b.0 [ 36.865767] IO window: disabled. [ 36.865769] MEM window: disabled. [ 36.865770] PREFETCH window: disabled. [ 36.865771] PCI: Bridge: 0000:00:0c.0 [ 36.865772] IO window: disabled. [ 36.865774] MEM window: disabled. [ 36.865775] PREFETCH window: disabled. [ 36.865777] PCI: Bridge: 0000:00:0d.0 [ 36.865778] IO window: disabled. [ 36.865779] MEM window: disabled. [ 36.865780] PREFETCH window: disabled. [ 36.865782] PCI: Bridge: 0000:00:0e.0 [ 36.865783] IO window: disabled. [ 36.865784] MEM window: disabled. [ 36.865785] PREFETCH window: disabled. [ 36.865790] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:07:00.0 [ 36.865832] PCI: Bridge: 0000:00:0f.0 [ 36.865833] IO window: 5000-5fff [ 36.865835] MEM window: c1000000-c2ffffff [ 36.865837] PREFETCH window: d0000000-dfffffff [ 36.865843] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 36.865848] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 36.865852] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 36.865855] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 36.865859] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 36.865862] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 36.865866] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 36.865945] NET: Registered protocol family 2 [ 36.905894] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 36.906242] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 36.907883] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 36.908298] TCP: Hash tables configured (established 262144 bind 65536) [ 36.908301] TCP reno registered [ 36.921916] checking if image is initramfs... it is [ 37.343154] Freeing initrd memory: 6784k freed [ 37.346430] Simple Boot Flag at 0x36 set to 0x1 [ 37.346889] audit: initializing netlink socket (disabled) [ 37.346900] audit(1169562352.424:1): initialized [ 37.347050] VFS: Disk quotas dquot_6.5.1 [ 37.347065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 37.347101] io scheduler noop registered [ 37.347103] io scheduler anticipatory registered [ 37.347105] io scheduler deadline registered [ 37.347116] io scheduler cfq registered (default) [ 37.552594] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 37.552606] assign_interrupt_mode Found MSI capability [ 37.552626] Allocate Port Service[0000:00:0a.0:pcie00] [ 37.552652] Allocate Port Service[0000:00:0a.0:pcie01] [ 37.552678] Allocate Port Service[0000:00:0a.0:pcie03] [ 37.552720] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 37.552731] assign_interrupt_mode Found MSI capability [ 37.552740] Allocate Port Service[0000:00:0b.0:pcie00] [ 37.552764] Allocate Port Service[0000:00:0b.0:pcie01] [ 37.552788] Allocate Port Service[0000:00:0b.0:pcie03] [ 37.552829] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 37.552840] assign_interrupt_mode Found MSI capability [ 37.552849] Allocate Port Service[0000:00:0c.0:pcie00] [ 37.552873] Allocate Port Service[0000:00:0c.0:pcie01] [ 37.552897] Allocate Port Service[0000:00:0c.0:pcie03] [ 37.552938] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 37.552949] assign_interrupt_mode Found MSI capability [ 37.552957] Allocate Port Service[0000:00:0d.0:pcie00] [ 37.552981] Allocate Port Service[0000:00:0d.0:pcie01] [ 37.553005] Allocate Port Service[0000:00:0d.0:pcie03] [ 37.553044] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 37.553055] assign_interrupt_mode Found MSI capability [ 37.553064] Allocate Port Service[0000:00:0e.0:pcie00] [ 37.553089] Allocate Port Service[0000:00:0e.0:pcie01] [ 37.553113] Allocate Port Service[0000:00:0e.0:pcie03] [ 37.553153] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 37.553164] assign_interrupt_mode Found MSI capability [ 37.553172] Allocate Port Service[0000:00:0f.0:pcie00] [ 37.553199] Allocate Port Service[0000:00:0f.0:pcie01] [ 37.553223] Allocate Port Service[0000:00:0f.0:pcie03] [ 37.553362] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553366] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553368] aer_init: AER service init fails - Run ACPI _OSC fails [ 37.553370] aer: probe of 0000:00:0a.0:pcie01 failed with error 2 [ 37.553424] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553427] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553428] aer_init: AER service init fails - Run ACPI _OSC fails [ 37.553430] aer: probe of 0000:00:0b.0:pcie01 failed with error 2 [ 37.553483] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553486] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553488] aer_init: AER service init fails - Run ACPI _OSC fails [ 37.553490] aer: probe of 0000:00:0c.0:pcie01 failed with error 2 [ 37.553542] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553545] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553547] aer_init: AER service init fails - Run ACPI _OSC fails [ 37.553549] aer: probe of 0000:00:0d.0:pcie01 failed with error 2 [ 37.553602] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553605] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553606] aer_init: AER service init fails - Run ACPI _OSC fails [ 37.553608] aer: probe of 0000:00:0e.0:pcie01 failed with error 2 [ 37.553661] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553664] Evaluate _OSC Set fails. Status = 0x0005 [ 37.553665] aer_init: AER service init fails - Run ACPI _OSC fails [ 37.553667] aer: probe of 0000:00:0f.0:pcie01 failed with error 2 [ 37.572674] Real Time Clock Driver v1.12ac [ 37.572709] Linux agpgart interface v0.101 (c) Dave Jones [ 37.572711] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 37.573135] mice: PS/2 mouse device common for all mice [ 37.573599] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 37.573676] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 37.573679] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 37.573928] PNP: No PS/2 controller found. Probing ports directly. [ 37.576740] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 37.576745] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 37.576891] TCP cubic registered [ 37.576899] NET: Registered protocol family 1 [ 37.576905] NET: Registered protocol family 8 [ 37.576906] NET: Registered protocol family 20 [ 37.577038] ACPI: (supports S0 S1 S3 S4 S5) [ 37.577074] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 37.577146] Freeing unused kernel memory: 300k freed [ 37.617917] vga16fb: initializing [ 37.617921] vga16fb: mapped to 0xffff8100000a0000 [ 37.748578] Console: switching to colour frame buffer device 80x25 [ 37.751956] fb0: VGA16 VGA frame buffer device [ 38.774405] Capability LSM initialized [ 39.111761] usbcore: registered new interface driver usbfs [ 39.111778] usbcore: registered new interface driver hub [ 39.111796] usbcore: registered new device driver usb [ 39.112724] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 [ 39.112732] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level, low) -> IRQ 23 [ 39.112743] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 39.112745] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 39.112853] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 39.112875] ehci_hcd 0000:00:02.1: debug port 1 [ 39.112877] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 39.112886] ehci_hcd 0000:00:02.1: irq 23, io mem 0xc0005000 [ 39.112892] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 39.112956] usb usb1: configuration #1 chosen from 1 choice [ 39.112977] hub 1-0:1.0: USB hub found [ 39.112982] hub 1-0:1.0: 10 ports detected [ 39.121270] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 39.125913] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 39.148512] ieee1394: Initialized config rom entry `ip1394' [ 39.217656] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 39.217667] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22 [ 39.217683] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 39.217685] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 39.217720] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 39.217736] ohci_hcd 0000:00:02.0: irq 22, io mem 0xc0004000 [ 39.278807] usb usb2: configuration #1 chosen from 1 choice [ 39.278826] hub 2-0:1.0: USB hub found [ 39.278832] hub 2-0:1.0: 10 ports detected [ 39.384910] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 39.384917] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 39.384920] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 39.384926] forcedeth: using HIGHDMA [ 39.891413] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 40.113007] usb 2-1: configuration #1 chosen from 1 choice [ 40.414551] eth0: forcedeth.c: subsystem: 0108e:534d bound to 0000:00:08.0 [ 40.414860] ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 20 [ 40.414868] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMA2] -> GSI 20 (level, low) -> IRQ 20 [ 40.414872] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 40.414879] forcedeth: using HIGHDMA [ 40.422273] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 40.643867] usb 2-2: configuration #1 chosen from 1 choice [ 40.646896] usbcore: registered new interface driver hiddev [ 40.651898] input: DELL DELL USB Keyboard as /class/input/input0 [ 40.651911] input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:02.0-1 [ 40.656824] input: Dell Dell USB Mouse as /class/input/input1 [ 40.656837] input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:02.0-2 [ 40.656844] usbcore: registered new interface driver usbhid [ 40.656847] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 41.444338] eth1: forcedeth.c: subsystem: 0108e:534d bound to 0000:00:09.0 [ 41.444742] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19 [ 41.444752] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK3] -> GSI 19 (level, low) -> IRQ 19 [ 41.497797] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[c0100000-c01007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 41.504002] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 [ 41.504011] NFORCE-MCP55: chipset revision 161 [ 41.504013] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 41.504015] NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. [ 41.504019] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 41.504024] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio [ 41.504031] Probing IDE interface ide0... [ 41.513199] SCSI subsystem initialized [ 41.516900] libata version 2.00 loaded. [ 42.242430] hda: MATSHITADVD-RAM SW-9585, ATAPI CD/DVD-ROM drive [ 42.578107] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 42.579992] sata_nv 0000:00:05.0: version 3.2 [ 42.580293] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 42.580295] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LTID] -> GSI 23 (level, low) -> IRQ 23 [ 42.580313] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 42.580359] ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 23 [ 42.580385] ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 23 [ 42.580391] scsi0 : sata_nv [ 42.777338] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800201440030131] [ 43.048639] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 43.056698] ata1.00: ATA-7, max UDMA/133, 488390625 sectors: LBA48 NCQ (depth 0/32) [ 43.056700] ata1.00: ata1: dev 0 multi count 16 [ 43.068669] ata1.00: configured for UDMA/133 [ 43.068678] scsi1 : sata_nv [ 43.379910] ata2: SATA link down (SStatus 0 SControl 300) [ 43.390137] ATA: abnormal status 0x7F on port 0x30BF [ 43.390210] scsi 0:0:0:0: Direct-Access ATA HITACHI HDS7225S V44O PQ: 0 ANSI: 5 [ 43.390536] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 22 [ 43.390539] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSI1] -> GSI 22 (level, low) -> IRQ 22 [ 43.390558] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 43.390589] ata3: SATA max UDMA/133 cmd 0x30D8 ctl 0x30CE bmdma 0x30A0 irq 22 [ 43.390611] ata4: SATA max UDMA/133 cmd 0x30D0 ctl 0x30CA bmdma 0x30A8 irq 22 [ 43.390617] scsi2 : sata_nv [ 43.703215] ata3: SATA link down (SStatus 0 SControl 300) [ 43.713441] ATA: abnormal status 0x7F on port 0x30DF [ 43.713449] scsi3 : sata_nv [ 44.026519] ata4: SATA link down (SStatus 0 SControl 300) [ 44.036745] ATA: abnormal status 0x7F on port 0x30D7 [ 44.042240] SCSI device sda: 488390625 512-byte hdwr sectors (250056 MB) [ 44.042250] sda: Write Protect is off [ 44.042251] sda: Mode Sense: 00 3a 00 00 [ 44.042261] SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 44.042296] SCSI device sda: 488390625 512-byte hdwr sectors (250056 MB) [ 44.042301] sda: Write Protect is off [ 44.042303] sda: Mode Sense: 00 3a 00 00 [ 44.042311] SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 44.042315] sda:<6>hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) [ 44.048435] Uniform CD-ROM driver Revision: 3.20 [ 44.054496] sda1 sda2 < sda5 > [ 44.071993] sd 0:0:0:0: Attached scsi disk sda [ 44.074749] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 44.242084] Attempting manual resume [ 44.250311] EXT3-fs: INFO: recovery required on readonly filesystem. [ 44.250313] EXT3-fs: write access will be enabled during recovery. [ 45.965061] kjournald starting. Commit interval 5 seconds [ 45.965069] EXT3-fs: recovery complete. [ 45.975576] EXT3-fs: mounted filesystem with ordered data mode. [ 51.586853] NET: Registered protocol family 10 [ 51.586932] lo: Disabled Privacy Extensions [ 62.002517] eth1: no link during initialization. [ 62.002659] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 63.037023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 63.048171] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 63.093439] input: PC Speaker as /class/input/input2 [ 63.109274] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 63.109300] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 63.364978] NET: Registered protocol family 17 [ 63.387796] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 63.387800] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 63.387821] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 63.787448] fuse init (API version 7.8) [ 63.849972] lp: driver loaded but no devices found [ 63.935624] Adding 6024332k swap on /dev/disk/by-uuid/944001da-b681-4631-b1eb-e4154893d68b. Priority:-1 extents:1 across:6024332k [ 64.093882] EXT3 FS on sda1, internal journal