[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[17179569.184000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000007fed3400 (usable)
[17179569.184000]  BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[17179569.184000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[17179569.184000] 1150MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 523987
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 294611 pages, LIFO batch:31
[17179569.184000] DMI 2.4 present.
[17179569.184000] ACPI: RSDP (v000 DELL                                  ) @ 0x000fc370
[17179569.184000] ACPI: RSDT (v001 DELL    M07     0x27d60609 ASL  0x00000061) @ 0x7fed3a54
[17179569.184000] ACPI: FADT (v001 DELL    M07     0x27d60609 ASL  0x00000061) @ 0x7fed4800
[17179569.184000] ACPI: MADT (v001 DELL    M07     0x27d60609 ASL  0x00000047) @ 0x7fed5000
[17179569.184000] ACPI: MCFG (v016 DELL    M07     0x27d60609 ASL  0x00000061) @ 0x7fed4fc0
[17179569.184000] ACPI: BOOT (v001 DELL    M07     0x27d60609 ASL  0x00000061) @ 0x7fed4bc0
[17179569.184000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7fed3a8c
[17179569.184000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash locale=de_DE
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1997.566 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.676000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.676000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.740000] Memory: 2067960k/2095948k available (1911k kernel code, 26648k reserved, 1073k data, 308k init, 1178444k highmem)
[17179569.740000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.820000] Calibrating delay using timer specific routine.. 4000.91 BogoMIPS (lpj=8001829)
[17179569.820000] Security Framework v1.0.0 initialized
[17179569.820000] SELinux:  Disabled at boot.
[17179569.820000] Mount-cache hash table entries: 512
[17179569.820000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179569.820000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179569.820000] monitor/mwait feature present.
[17179569.820000] using mwait in idle threads.
[17179569.820000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.820000] CPU: L2 cache: 2048K
[17179569.820000] CPU: Hyper-Threading is disabled
[17179569.820000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
[17179569.820000] Checking 'hlt' instruction... OK.
[17179569.836000] SMP alternatives: switching to UP code
[17179569.836000] checking if image is initramfs... it is
[17179570.300000] Freeing initrd memory: 5622k freed
[17179570.300000] ACPI: Core revision 20060707
[17179570.316000] ACPI: Looking for DSDT ... not found!
[17179570.320000] CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
[17179570.320000] SMP alternatives: switching to SMP code
[17179570.320000] Booting processor 1/1 eip 3000
[17179570.332000] Initializing CPU#1
[17179570.412000] Calibrating delay using timer specific routine.. 3994.96 BogoMIPS (lpj=7989922)
[17179570.412000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179570.412000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179570.412000] monitor/mwait feature present.
[17179570.412000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179570.412000] CPU: L2 cache: 2048K
[17179570.412000] CPU: Hyper-Threading is disabled
[17179570.412000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
[17179570.412000] CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
[17179570.412000] Total of 2 processors activated (7995.87 BogoMIPS).
[17179570.412000] ENABLING IO-APIC IRQs
[17179570.412000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.556000] checking TSC synchronization across 2 CPUs: 
[17179570.560000] Brought up 2 CPUs
[17179570.764000] migration_cost=4000
[17179570.764000] NET: Registered protocol family 16
[17179570.764000] EISA bus registered
[17179570.764000] ACPI: bus type pci registered
[17179570.764000] PCI: Using MMCONFIG
[17179570.768000] Setting up standard PCI resources
[17179570.792000] ACPI: Interpreter enabled
[17179570.792000] ACPI: Using IOAPIC for interrupt routing
[17179570.792000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.792000] PCI: Probing PCI hardware (bus 00)
[17179570.792000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179570.804000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[17179570.804000] Boot video device is 0000:01:00.0
[17179570.808000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.808000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.824000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[17179570.824000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[17179570.824000] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[17179570.824000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[17179570.828000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[17179570.828000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.828000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.828000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[17179570.828000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179570.828000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[17179570.828000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179570.828000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[17179570.828000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[17179570.828000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.828000] pnp: PnP ACPI init
[17179570.860000] pnp: PnP ACPI: found 11 devices
[17179570.860000] PnPBIOS: Disabled by ACPI PNP
[17179570.860000] PCI: Using ACPI for IRQ routing
[17179570.860000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.876000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[17179570.876000] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
[17179570.876000] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
[17179570.876000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[17179570.876000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[17179570.876000] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[17179570.876000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[17179570.876000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[17179570.876000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[17179570.876000] pnp: 00:08: ioport range 0xc80-0xcff has been reserved
[17179570.876000] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[17179570.876000] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[17179570.876000] pnp: 00:08: ioport range 0x930-0x97f has been reserved
[17179570.876000] PCI: Bridge: 0000:00:01.0
[17179570.876000]   IO window: e000-efff
[17179570.876000]   MEM window: dd000000-dfefffff
[17179570.876000]   PREFETCH window: c0000000-cfffffff
[17179570.876000] PCI: Bridge: 0000:00:1c.0
[17179570.876000]   IO window: disabled.
[17179570.876000]   MEM window: disabled.
[17179570.876000]   PREFETCH window: disabled.
[17179570.876000] PCI: Bridge: 0000:00:1c.1
[17179570.876000]   IO window: disabled.
[17179570.876000]   MEM window: dcf00000-dcffffff
[17179570.876000]   PREFETCH window: disabled.
[17179570.876000] PCI: Bridge: 0000:00:1c.3
[17179570.876000]   IO window: d000-dfff
[17179570.876000]   MEM window: dcc00000-dcefffff
[17179570.876000]   PREFETCH window: d0000000-d01fffff
[17179570.876000] PCI: Bridge: 0000:00:1e.0
[17179570.876000]   IO window: disabled.
[17179570.876000]   MEM window: dcb00000-dcbfffff
[17179570.876000]   PREFETCH window: disabled.
[17179570.876000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.876000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.876000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.876000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.876000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
[17179570.876000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179570.876000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
[17179570.876000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179570.876000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.876000] NET: Registered protocol family 2
[17179570.920000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.920000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[17179570.920000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179570.920000] TCP: Hash tables configured (established 262144 bind 65536)
[17179570.920000] TCP reno registered
[17179570.920000] Simple Boot Flag at 0x79 set to 0x1
[17179570.920000] audit: initializing netlink socket (disabled)
[17179570.920000] audit(1172165634.920:1): initialized
[17179570.920000] highmem bounce pool size: 64 pages
[17179570.920000] VFS: Disk quotas dquot_6.5.1
[17179570.920000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.920000] Initializing Cryptographic API
[17179570.920000] io scheduler noop registered
[17179570.920000] io scheduler anticipatory registered
[17179570.920000] io scheduler deadline registered
[17179570.920000] io scheduler cfq registered (default)
[17179570.920000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.920000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.920000] assign_interrupt_mode Found MSI capability
[17179570.920000] Allocate Port Service[0000:00:01.0:pcie00]
[17179570.920000] Allocate Port Service[0000:00:01.0:pcie03]
[17179570.920000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.920000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.920000] assign_interrupt_mode Found MSI capability
[17179570.920000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179570.920000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179570.920000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179570.920000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
[17179570.920000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179570.920000] assign_interrupt_mode Found MSI capability
[17179570.920000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179570.920000] Allocate Port Service[0000:00:1c.1:pcie02]
[17179570.920000] Allocate Port Service[0000:00:1c.1:pcie03]
[17179570.920000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
[17179570.920000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179570.920000] assign_interrupt_mode Found MSI capability
[17179570.920000] Allocate Port Service[0000:00:1c.3:pcie00]
[17179570.920000] Allocate Port Service[0000:00:1c.3:pcie02]
[17179570.920000] Allocate Port Service[0000:00:1c.3:pcie03]
[17179570.924000] isapnp: Scanning for PnP cards...
[17179571.276000] isapnp: No Plug & Play device found
[17179571.296000] Real Time Clock Driver v1.12ac
[17179571.296000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.296000] mice: PS/2 mouse device common for all mice
[17179571.296000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.296000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.296000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.296000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.300000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.300000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.300000] EISA: Probing bus 0 at eisa.0
[17179571.300000] EISA: Cannot allocate resource for mainboard
[17179571.300000] Cannot allocate resource for EISA slot 1
[17179571.300000] EISA: Detected 0 cards.
[17179571.300000] TCP bic registered
[17179571.300000] NET: Registered protocol family 1
[17179571.300000] NET: Registered protocol family 8
[17179571.300000] NET: Registered protocol family 20
[17179571.300000] Starting balanced_irq
[17179571.300000] Using IPI No-Shortcut mode
[17179571.300000] ACPI: (supports S0 S3 S4 S5)
[17179571.300000] Freeing unused kernel memory: 308k freed
[17179571.304000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.584000] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[17179571.584000] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[17179572.356000] Capability LSM initialized
[17179572.380000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[17179572.380000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[17179572.384000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179572.384000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179572.384000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[17179572.384000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[17179572.384000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[17179572.384000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179572.388000] ACPI: Thermal Zone [THM] (53 C)
[17179572.648000] SCSI subsystem initialized
[17179572.648000] libata version 1.20 loaded.
[17179572.652000] ata_piix 0000:00:1f.2: version 1.05
[17179572.652000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
[17179572.652000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179572.652000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
[17179572.816000] ata1: dev 0 cfg 49:2f00 82:746b 83:7f09 84:6123 85:7469 86:3c09 87:6123 88:207f
[17179572.816000] ata1: dev 0 ATA-7, max UDMA/133, 231496650 sectors: LBA48
[17179572.824000] ata1: dev 0 configured for UDMA/133
[17179572.824000] scsi0 : ata_piix
[17179572.824000]   Vendor: ATA       Model: WDC WD1200BEVS-7  Rev: 02.0
[17179572.824000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179572.824000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
[17179573.144000] ata2: dev 0 cfg 49:0b00 82:0210 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
[17179573.144000] ata2: dev 0 ATAPI, max UDMA/33
[17179573.340000] ata2: dev 0 configured for UDMA/33
[17179573.340000] scsi1 : ata_piix
[17179573.372000]   Vendor: PHILIPS   Model: DVD+-RW SDVD8820  Rev: AD15
[17179573.372000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[17179573.384000] SCSI device sda: 231496650 512-byte hdwr sectors (118526 MB)
[17179573.384000] sda: Write Protect is off
[17179573.384000] sda: Mode Sense: 00 3a 00 00
[17179573.384000] SCSI device sda: drive cache: write back
[17179573.388000] SCSI device sda: 231496650 512-byte hdwr sectors (118526 MB)
[17179573.388000] sda: Write Protect is off
[17179573.388000] sda: Mode Sense: 00 3a 00 00
[17179573.388000] SCSI device sda: drive cache: write back
[17179573.388000]  sda: sda1 sda2 < sda5 >
[17179573.464000] sd 0:0:0:0: Attached scsi disk sda
[17179573.620000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179573.620000] ide0: ports already in use, skipping probe
[17179573.620000] ide1: I/O resource 0x170-0x177 not free.
[17179573.620000] ide1: ports already in use, skipping probe
[17179573.636000] usbcore: registered new driver usbfs
[17179573.636000] usbcore: registered new driver hub
[17179573.636000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 233
[17179573.636000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179573.636000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179573.636000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[17179573.636000] ehci_hcd 0000:00:1d.7: debug port 1
[17179573.636000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179573.636000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xffa80000
[17179573.640000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179573.640000] usb usb1: configuration #1 chosen from 1 choice
[17179573.640000] hub 1-0:1.0: USB hub found
[17179573.640000] hub 1-0:1.0: 8 ports detected
[17179573.656000] USB Universal Host Controller Interface driver v3.0
[17179573.676000] ieee1394: Initialized config rom entry `ip1394'
[17179573.744000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 185
[17179573.748000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 233
[17179573.748000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179573.748000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179573.748000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[17179573.748000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000bf80
[17179573.748000] usb usb2: configuration #1 chosen from 1 choice
[17179573.748000] hub 2-0:1.0: USB hub found
[17179573.748000] hub 2-0:1.0: 2 ports detected
[17179573.796000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[dcbfd800-dcbfdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[17179573.852000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 50
[17179573.852000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179573.852000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179573.852000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[17179573.852000] uhci_hcd 0000:00:1d.1: irq 50, io base 0x0000bf60
[17179573.852000] usb usb3: configuration #1 chosen from 1 choice
[17179573.852000] hub 3-0:1.0: USB hub found
[17179573.852000] hub 3-0:1.0: 2 ports detected
[17179573.956000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 58
[17179573.956000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179573.956000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179573.956000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[17179573.956000] uhci_hcd 0000:00:1d.2: irq 58, io base 0x0000bf40
[17179573.956000] usb usb4: configuration #1 chosen from 1 choice
[17179573.956000] hub 4-0:1.0: USB hub found
[17179573.956000] hub 4-0:1.0: 2 ports detected
[17179573.984000] usb 1-1: new high speed USB device using ehci_hcd and address 2
[17179574.060000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 66
[17179574.060000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179574.060000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179574.060000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[17179574.060000] uhci_hcd 0000:00:1d.3: irq 66, io base 0x0000bf20
[17179574.060000] usb usb5: configuration #1 chosen from 1 choice
[17179574.060000] hub 5-0:1.0: USB hub found
[17179574.060000] hub 5-0:1.0: 2 ports detected
[17179574.116000] usb 1-1: configuration #1 chosen from 1 choice
[17179574.116000] hub 1-1:1.0: USB hub found
[17179574.116000] hub 1-1:1.0: 4 ports detected
[17179574.252000] Attempting manual resume
[17179574.264000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179574.264000] EXT3-fs: write access will be enabled during recovery.
[17179574.316000] kjournald starting.  Commit interval 5 seconds
[17179574.316000] EXT3-fs: recovery complete.
[17179574.328000] EXT3-fs: mounted filesystem with ordered data mode.
[17179574.548000] usb 1-1.4: new full speed USB device using ehci_hcd and address 3
[17179574.644000] usb 1-1.4: configuration #1 chosen from 1 choice
[17179575.072000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[464fc00029d73050]
[17179585.264000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179585.300000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179585.324000] hw_random hardware driver 1.0.0 loaded
[17179585.368000] Bluetooth: Core ver 2.8
[17179585.368000] NET: Registered protocol family 31
[17179585.368000] Bluetooth: HCI device and connection manager initialized
[17179585.368000] Bluetooth: HCI socket layer initialized
[17179585.372000] Linux agpgart interface v0.101 (c) Dave Jones
[17179585.388000] agpgart: Detected an Intel 945GM Chipset.
[17179585.404000] agpgart: AGP aperture is 256M @ 0x0
[17179585.516000] input: PC Speaker as /class/input/input1
[17179585.744000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179585.744000]  1:0:0:0: Attached scsi generic sg1 type 5
[17179585.772000] Bluetooth: HCI USB driver ver 2.9
[17179585.772000] usbcore: registered new driver hci_usb
[17179585.808000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179585.808000] sdhci: Copyright(c) Pierre Ossman
[17179585.808000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
[17179585.808000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 74
[17179585.808000] mmc0: SDHCI at 0xdcbfd400 irq 74 DMA
[17179585.832000] nvidia: module license 'NVIDIA' taints kernel.
[17179586.088000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179586.088000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179586.088000] NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15 09:54:45 PST 2006
[17179586.160000] ieee80211_crypt: registered algorithm 'NULL'
[17179586.160000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179586.160000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179586.160000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[17179586.160000] Uniform CD-ROM driver Revision: 3.20
[17179586.160000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[17179586.200000] b44.c:v1.00 (Apr 7, 2006)
[17179586.200000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179586.204000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:3a:cd:6c
[17179586.224000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 50
[17179586.224000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179586.224000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
[17179586.248000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp
[17179586.248000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[17179586.264000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179586.316000] ts: Compaq touchscreen protocol output
[17179586.792000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179586.792000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[17179586.792000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[17179587.412000] NET: Registered protocol family 17
[17179587.632000] lp: driver loaded but no devices found
[17179587.652000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179587.652000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179587.672000] Adding 4715036k swap on /dev/disk/by-uuid/af9300c5-16a4-4b74-ba38-5395c62e4a96.  Priority:-1 extents:1 across:4715036k
[17179587.756000] EXT3 FS on sda1, internal journal
[17179588.780000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[17179588.824000] ACPI: AC Adapter [AC] (on-line)
[17179588.880000] ACPI: Battery Slot [BAT0] (battery present)
[17179588.900000] ACPI: Lid Switch [LID]
[17179588.900000] ACPI: Power Button (CM) [PBTN]
[17179588.900000] ACPI: Sleep Button (CM) [SBTN]
[17179589.028000] ibm_acpi: ec object not found
[17179589.068000] pcc_acpi: loading...
[17179589.168000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[17179589.168000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[17179589.168000] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[17179589.300000] b44: eth0: Link is up at 100 Mbps, full duplex.
[17179589.300000] b44: eth0: Flow control is off for TX and off for RX.
[17179592.184000] ipw3945: Radio Frequency Kill Switch is On:
[17179592.184000] Kill switch must be turned off for wireless networking to work.
[17179592.184000] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[17179592.184000] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[17179592.812000] NET: Registered protocol family 10
[17179592.812000] lo: Disabled Privacy Extensions
[17179592.812000] IPv6 over IPv4 tunneling driver
[17179593.488000] apm: BIOS not found.
[17179594.888000] usb 1-1.4: USB disconnect, address 3
[17179602.196000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179602.764000] Bluetooth: L2CAP ver 2.8
[17179602.764000] Bluetooth: L2CAP socket layer initialized
[17179602.772000] Bluetooth: RFCOMM socket layer initialized
[17179602.772000] Bluetooth: RFCOMM TTY layer initialized
[17179602.772000] Bluetooth: RFCOMM ver 1.7
[17179603.216000] eth0: no IPv6 routers present
[17179617.556000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179617.984000] ISO 9660 Extensions: RRIP_1991A
[17179620.540000] eth0: no IPv6 routers present