ubuntu@Dell:~$ dmesg [17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [17179569.184000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 0000000077e70000 (usable) [17179569.184000] BIOS-e820: 0000000077e70000 - 0000000077e81000 (ACPI data) [17179569.184000] BIOS-e820: 0000000077e81000 - 0000000077f00000 (ACPI NVS) [17179569.184000] BIOS-e820: 0000000077f00000 - 0000000080000000 (reserved) [17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [17179569.184000] 1022MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f8780 [17179569.184000] On node 0 totalpages: 491120 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 261744 pages, LIFO batch:31 [17179569.184000] DMI present. [17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f8750 [17179569.184000] ACPI: RSDT (v001 DELL M08 0x06040000 LTP 0x00000000) @ 0x77e7a60c [17179569.184000] ACPI: FADT (v001 ATI Bowfin 0x06040000 ATI 0x000f4240) @ 0x77e80c4d [17179569.184000] ACPI: TCPA (v002 AMD 0x06040000 PTEC 0x00000000) @ 0x77e80cc1 [17179569.184000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x77e80cf3 [17179569.184000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x77e80e08 [17179569.184000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x77e80e4e [17179569.184000] ACPI: SLIC (v001 DELL M08 0x06040000 LTP 0x00000000) @ 0x77e80e8a [17179569.184000] ACPI: DSDT (v001 ATI SB600 0x06040000 MSFT 0x03000000) @ 0x00000000 [17179569.184000] ATI board detected. Disabling timer routing over 8254. [17179569.184000] ACPI: PM-Timer IO Port: 0x8008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 15:12 APIC version 16 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sda2 ro quiet splash pci=nomsi [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes) [17179569.184000] Detected 1995.461 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179569.400000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.400000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.452000] Memory: 1937664k/1964480k available (1911k kernel code, 25584k reserved, 1073k data, 308k init, 1046976k highmem) [17179569.452000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.532000] Calibrating delay using timer specific routine.. 3995.89 BogoMIPS (lpj=7991798) [17179569.532000] Security Framework v1.0.0 initialized [17179569.532000] SELinux: Disabled at boot. [17179569.532000] Mount-cache hash table entries: 512 [17179569.532000] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d [17179569.532000] CPU: After vendor identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d [17179569.532000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17179569.532000] CPU: L2 Cache: 512K (64 bytes/line) [17179569.532000] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d [17179569.532000] Checking 'hlt' instruction... OK. [17179569.548000] SMP alternatives: switching to UP code [17179569.548000] Freeing SMP alternatives: 16k freed [17179569.548000] checking if image is initramfs... it is [17179570.012000] Freeing initrd memory: 5624k freed [17179570.012000] ACPI: Core revision 20060707 [17179570.016000] ACPI: Looking for DSDT ... not found! [17179571.056000] CPU0: AMD Turion(tm) 64 Mobile Technology MK-36 stepping 02 [17179571.056000] Total of 1 processors activated (3995.89 BogoMIPS). [17179571.056000] ENABLING IO-APIC IRQs [17179571.056000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [17179571.056000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [17179571.056000] ...trying to set up timer (IRQ0) through the 8259A ... failed. [17179571.056000] ...trying to set up timer as Virtual Wire IRQ... works. [17179571.240000] Brought up 1 CPUs [17179571.240000] migration_cost=0 [17179571.240000] NET: Registered protocol family 16 [17179571.240000] EISA bus registered [17179571.240000] ACPI: bus type pci registered [17179571.240000] PCI: Using MMCONFIG [17179571.240000] PCI: No mmconfig possible on 0:18 [17179571.240000] Setting up standard PCI resources [17179571.244000] ACPI: Interpreter enabled [17179571.244000] ACPI: Using IOAPIC for interrupt routing [17179571.244000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179571.244000] PCI: Probing PCI hardware (bus 00) [17179571.248000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 [17179571.248000] Boot video device is 0000:01:05.0 [17179571.248000] PCI: Transparent bridge - 0000:00:14.4 [17179571.248000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179571.252000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [17179571.252000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [17179571.252000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [17179571.252000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [17179571.252000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [17179571.252000] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [17179571.252000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [17179571.252000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [17179571.252000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [17179571.252000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [17179571.252000] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [17179571.256000] ACPI: Embedded Controller [EC0] (gpe 20) interrupt mode. [17179571.260000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [17179571.260000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17179571.260000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179571.260000] pnp: PnP ACPI init [17179571.264000] pnp: PnP ACPI: found 10 devices [17179571.264000] PnPBIOS: Disabled by ACPI PNP [17179571.264000] PCI: Using ACPI for IRQ routing [17179571.264000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179571.264000] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [17179571.264000] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [17179571.264000] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [17179571.264000] pnp: 00:08: ioport range 0x220-0x22f has been reserved [17179571.264000] PCI: Bridge: 0000:00:01.0 [17179571.264000] IO window: 9000-9fff [17179571.264000] MEM window: c0100000-c01fffff [17179571.264000] PREFETCH window: c8000000-cfffffff [17179571.264000] PCI: Bridge: 0000:00:05.0 [17179571.264000] IO window: disabled. [17179571.264000] MEM window: disabled. [17179571.264000] PREFETCH window: disabled. [17179571.264000] PCI: Bridge: 0000:00:06.0 [17179571.264000] IO window: disabled. [17179571.264000] MEM window: c0200000-c02fffff [17179571.264000] PREFETCH window: disabled. [17179571.264000] PCI: Bridge: 0000:00:14.4 [17179571.264000] IO window: disabled. [17179571.264000] MEM window: c0300000-c03fffff [17179571.264000] PREFETCH window: disabled. [17179571.264000] PCI: Setting latency timer of device 0000:00:05.0 to 64 [17179571.264000] PCI: Setting latency timer of device 0000:00:06.0 to 64 [17179571.264000] NET: Registered protocol family 2 [17179571.304000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [17179571.304000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [17179571.304000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [17179571.304000] TCP: Hash tables configured (established 262144 bind 65536) [17179571.304000] TCP reno registered [17179571.304000] audit: initializing netlink socket (disabled) [17179571.304000] audit(1173452844.304:1): initialized [17179571.304000] highmem bounce pool size: 64 pages [17179571.304000] VFS: Disk quotas dquot_6.5.1 [17179571.304000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179571.304000] Initializing Cryptographic API [17179571.304000] io scheduler noop registered [17179571.304000] io scheduler anticipatory registered [17179571.304000] io scheduler deadline registered [17179571.304000] io scheduler cfq registered (default) [17179571.304000] PCI: Setting latency timer of device 0000:00:05.0 to 64 [17179571.304000] pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS [17179571.304000] assign_interrupt_mode Found MSI capability [17179571.304000] Allocate Port Service[0000:00:05.0:pcie00] [17179571.304000] Allocate Port Service[0000:00:05.0:pcie02] [17179571.304000] PCI: Setting latency timer of device 0000:00:06.0 to 64 [17179571.304000] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS [17179571.304000] assign_interrupt_mode Found MSI capability [17179571.304000] Allocate Port Service[0000:00:06.0:pcie00] [17179571.304000] Allocate Port Service[0000:00:06.0:pcie02] [17179571.304000] isapnp: Scanning for PnP cards... [17179571.660000] isapnp: No Plug & Play device found [17179571.676000] Real Time Clock Driver v1.12ac [17179571.676000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17179571.676000] mice: PS/2 mouse device common for all mice [17179571.680000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179571.680000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179571.680000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179571.680000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [17179571.680000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179571.680000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179571.680000] EISA: Probing bus 0 at eisa.0 [17179571.680000] Cannot allocate resource for EISA slot 1 [17179571.680000] Cannot allocate resource for EISA slot 8 [17179571.680000] EISA: Detected 0 cards. [17179571.680000] TCP bic registered [17179571.680000] NET: Registered protocol family 1 [17179571.680000] NET: Registered protocol family 8 [17179571.680000] NET: Registered protocol family 20 [17179571.680000] Using IPI No-Shortcut mode [17179571.680000] ACPI: (supports S0 S3 S4 S5) [17179571.680000] Freeing unused kernel memory: 308k freed [17179571.716000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179572.896000] Capability LSM initialized [17179573.228000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179573.228000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179573.228000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707] [17179573.228000] ACPI: Getting cpuindex for acpiid 0x1 [17179573.628000] ACPI: Thermal Zone [THRM] (60 C) [17179574.080000] SCSI subsystem initialized [17179574.080000] libata version 1.20 loaded. [17179574.080000] ahci 0000:00:12.0: version 1.2 [17179574.080000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 177 [17179579.900000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [17179579.900000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part [17179579.900000] ata1: SATA max UDMA/133 cmd 0xF8840100 ctl 0x0 bmdma 0x0 irq 177 [17179579.900000] ata2: SATA max UDMA/133 cmd 0xF8840180 ctl 0x0 bmdma 0x0 irq 177 [17179579.900000] ata3: SATA max UDMA/133 cmd 0xF8840200 ctl 0x0 bmdma 0x0 irq 177 [17179579.900000] ata4: SATA max UDMA/133 cmd 0xF8840280 ctl 0x0 bmdma 0x0 irq 177 [17179580.276000] ata1: SATA link up 1.5 Gbps (SStatus 113) [17179580.284000] ata1: dev 0 cfg 49:2f00 82:746b 83:7f09 84:6023 85:3c69 86:3f01 87:6003 88:40ff [17179580.284000] ata1: dev 0 ATA-7, max UDMA7, 117210240 sectors: LBA48 [17179580.288000] ata1: dev 0 configured for UDMA/133 [17179580.288000] scsi0 : ahci [17179580.492000] ata2: SATA link down (SStatus 0) [17179580.492000] scsi1 : ahci [17179580.696000] ata3: SATA link down (SStatus 0) [17179580.696000] scsi2 : ahci [17179580.900000] ata4: SATA link down (SStatus 0) [17179580.900000] scsi3 : ahci [17179580.900000] Vendor: ATA Model: SAMSUNG HM060HI Rev: YD10 [17179580.900000] Type: Direct-Access ANSI SCSI revision: 05 [17179580.908000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [17179580.908000] sda: Write Protect is off [17179580.908000] sda: Mode Sense: 00 3a 00 00 [17179580.908000] SCSI device sda: drive cache: write back [17179580.908000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [17179580.908000] sda: Write Protect is off [17179580.908000] sda: Mode Sense: 00 3a 00 00 [17179580.908000] SCSI device sda: drive cache: write back [17179580.908000] sda: sda1 sda2 sda3 < sda5 > [17179581.408000] sd 0:0:0:0: Attached scsi disk sda [17179581.716000] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [17179581.716000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185 [17179581.716000] ATIIXP: chipset revision 0 [17179581.716000] ATIIXP: not 100% native mode: will probe irqs later [17179581.716000] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio [17179581.716000] ATIIXP: simplex device: DMA disabled [17179581.716000] ide1: ATIIXP Bus-Master DMA disabled (BIOS) [17179581.716000] Probing IDE interface ide0... [17179582.452000] hda: TSSTcorpCD-RW/DVD-ROM TSL462D, ATAPI CD/DVD-ROM drive [17179583.124000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179583.140000] Probing IDE interface ide1... [17179583.708000] hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) [17179583.708000] Uniform CD-ROM driver Revision: 3.20 [17179583.744000] Probing IDE interface ide1... [17179583.792000] usbcore: registered new driver usbfs [17179583.792000] usbcore: registered new driver hub [17179583.796000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [17179583.796000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 185 [17179583.796000] ohci_hcd 0000:00:13.0: OHCI Host Controller [17179583.796000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [17179583.796000] ohci_hcd 0000:00:13.0: irq 185, io mem 0xc0005000 [17179583.860000] usb usb1: configuration #1 chosen from 1 choice [17179583.860000] hub 1-0:1.0: USB hub found [17179583.860000] hub 1-0:1.0: 2 ports detected [17179583.964000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 193 [17179583.964000] ohci_hcd 0000:00:13.1: OHCI Host Controller [17179583.964000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [17179583.964000] ohci_hcd 0000:00:13.1: irq 193, io mem 0xc0006000 [17179584.020000] usb usb2: configuration #1 chosen from 1 choice [17179584.020000] hub 2-0:1.0: USB hub found [17179584.020000] hub 2-0:1.0: 2 ports detected [17179584.124000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 201 [17179584.124000] ohci_hcd 0000:00:13.2: OHCI Host Controller [17179584.124000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [17179584.124000] ohci_hcd 0000:00:13.2: irq 201, io mem 0xc0007000 [17179584.180000] usb usb3: configuration #1 chosen from 1 choice [17179584.180000] hub 3-0:1.0: USB hub found [17179584.180000] hub 3-0:1.0: 2 ports detected [17179584.276000] usb 1-1: new full speed USB device using ohci_hcd and address 2 [17179584.284000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 193 [17179584.284000] ohci_hcd 0000:00:13.3: OHCI Host Controller [17179584.284000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [17179584.284000] ohci_hcd 0000:00:13.3: irq 193, io mem 0xc0008000 [17179584.340000] usb usb4: configuration #1 chosen from 1 choice [17179584.340000] hub 4-0:1.0: USB hub found [17179584.340000] hub 4-0:1.0: 2 ports detected [17179584.444000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 201 [17179584.444000] ohci_hcd 0000:00:13.4: OHCI Host Controller [17179584.444000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [17179584.444000] ohci_hcd 0000:00:13.4: irq 201, io mem 0xc0009000 [17179584.496000] usb 1-1: configuration #1 chosen from 1 choice [17179584.500000] usb usb5: configuration #1 chosen from 1 choice [17179584.500000] hub 5-0:1.0: USB hub found [17179584.500000] hub 5-0:1.0: 2 ports detected [17179584.604000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 209 [17179584.604000] ehci_hcd 0000:00:13.5: EHCI Host Controller [17179584.604000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [17179584.604000] ehci_hcd 0000:00:13.5: debug port 1 [17179584.604000] ehci_hcd 0000:00:13.5: irq 209, io mem 0xc0004400 [17179584.604000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179584.604000] usb usb6: configuration #1 chosen from 1 choice [17179584.604000] hub 6-0:1.0: USB hub found [17179584.604000] hub 6-0:1.0: 10 ports detected [17179585.000000] usb 6-1: new high speed USB device using ehci_hcd and address 2 [17179585.132000] usb 6-1: configuration #1 chosen from 1 choice [17179585.316000] usb 1-1: USB disconnect, address 2 [17179585.316000] usbcore: registered new driver hiddev [17179585.444000] ohci_hcd 0000:00:13.2: wakeup [17179585.524000] hiddev96: USB HID v1.00 Device [Dell AIO Printer 946] on usb-0000:00:13.5-1 [17179585.524000] usbcore: registered new driver usbhid [17179585.524000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179585.564000] Attempting manual resume [17179585.572000] EXT3-fs: INFO: recovery required on readonly filesystem. [17179585.572000] EXT3-fs: write access will be enabled during recovery. [17179585.836000] usb 3-1: new low speed USB device using ohci_hcd and address 2 [17179586.056000] usb 3-1: configuration #1 chosen from 1 choice [17179586.072000] input: Gyration Gyration RF Technology Receiver as /class/input/input1 [17179586.072000] input,hiddev97: USB HID v1.10 Keyboard [Gyration Gyration RF Technology Receiver] on usb-0000:00:13.2-1 [17179586.080000] input: Gyration Gyration RF Technology Receiver as /class/input/input2 [17179586.080000] input,hiddev98: USB HID v1.20 Mouse [Gyration Gyration RF Technology Receiver] on usb-0000:00:13.2-1 [17179588.624000] kjournald starting. Commit interval 5 seconds [17179588.624000] EXT3-fs: recovery complete. [17179588.628000] EXT3-fs: mounted filesystem with ordered data mode. [17179599.992000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179600.032000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179600.184000] Linux agpgart interface v0.101 (c) Dave Jones [17179600.256000] input: PC Speaker as /class/input/input3 [17179600.840000] ndiswrapper version 1.37 loaded (preempt=no,smp=yes) [17179601.172000] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded [17179601.172000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 201 [17179601.172000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [17179601.176000] ndiswrapper: using IRQ 201 [17179601.436000] sdhci: Secure Digital Host Controller Interface driver, 0.12 [17179601.436000] sdhci: Copyright(c) Pierre Ossman [17179601.616000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179601.792000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x413C pid 0x5116 [17179601.792000] usbcore: registered new driver usblp [17179601.792000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [17179601.832000] wlan0: ethernet device 00:1a:92:42:4c:e0 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: '', 14E4:4311.5.conf [17179601.832000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [17179601.832000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 185 [17179601.832000] usbcore: registered new driver ndiswrapper [17179601.912000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000 [17179601.920000] ndiswrapper: changing interface name from 'wlan0' to 'eth1' [17179601.924000] ts: Compaq touchscreen protocol output [17179601.948000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [17179602.392000] sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19) [17179602.392000] ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 217 [17179602.392000] mmc0: SDHCI at 0xc0302000 irq 217 DMA [17179602.396000] b44.c:v1.00 (Apr 7, 2006) [17179602.396000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 225 [17179602.400000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:19:b9:4f:f1:4b [17179602.568000] lp: driver loaded but no devices found [17179602.592000] Adding 538136k swap on /dev/disk/by-uuid/27a5c14a-b424-4158-b9df-8ee1390111ab. Priority:-1 extents:1 across:538136k [17179602.632000] EXT3 FS on sda2, internal journal [17179603.228000] NET: Registered protocol family 17 [17179606.932000] ACPI: AC Adapter [ACAD] (on-line) [17179606.984000] ACPI: Battery Slot [BAT1] (battery present) [17179606.996000] ACPI: Power Button (FF) [PWRF] [17179606.996000] ACPI: Power Button (CM) [PWRB] [17179606.996000] ACPI: Sleep Button (CM) [SLPB] [17179606.996000] ACPI: Lid Switch [LID] [17179607.108000] ibm_acpi: ec object not found [17179607.136000] pcc_acpi: loading... [17179607.188000] wmi_add device=dff9fc00 [17179607.188000] calling WQBA [17179607.236000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [17179607.424000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) [17179607.424000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe (1200 mV) [17179607.424000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 (1150 mV) [17179607.424000] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x12 (1100 mV) [17179607.424000] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18 (950 mV) [17179607.424000] cpu_init done, current fid 0xc, vid 0xe [17179610.828000] [fglrx] Maximum main memory to use for locked dma buffers: 1776 MBytes. [17179610.828000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0 [17179610.836000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 193 [17179612.640000] [fglrx] total GART = 134217728 [17179612.640000] [fglrx] free GART = 118226944 [17179612.640000] [fglrx] max single GART = 118226944 [17179612.640000] [fglrx] total LFB = 127889408 [17179612.640000] [fglrx] free LFB = 119697408 [17179612.640000] [fglrx] max single LFB = 119697408 [17179612.640000] [fglrx] total Inv = 0 [17179612.640000] [fglrx] free Inv = 0 [17179612.640000] [fglrx] max single Inv = 0 [17179612.640000] [fglrx] total TIM = 0 [17179612.872000] apm: BIOS not found. [17179615.908000] hda-intel: Invalid position buffer, using LPIB read method instead. [17179621.328000] /dev/vmmon[4541]: Module vmmon: registered with major=10 minor=165 [17179621.328000] /dev/vmmon[4541]: Module vmmon: initialized [17179621.396000] /dev/vmnet: open called by PID 4565 (vmnet-bridge) [17179621.396000] /dev/vmnet: hub 0 does not exist, allocating memory. [17179621.400000] /dev/vmnet: port on hub 0 successfully opened [17179621.400000] bridge-eth0: enabling the bridge [17179621.400000] bridge-eth0: up [17179621.400000] bridge-eth0: already up [17179621.400000] bridge-eth0: attached [17179621.444000] /dev/vmnet: open called by PID 4580 (vmnet-netifup) [17179621.444000] /dev/vmnet: hub 1 does not exist, allocating memory. [17179621.444000] /dev/vmnet: port on hub 1 successfully opened [17179621.448000] /dev/vmnet: open called by PID 4581 (vmnet-netifup) [17179621.448000] /dev/vmnet: hub 8 does not exist, allocating memory. [17179621.448000] /dev/vmnet: port on hub 8 successfully opened [17179621.468000] /dev/vmnet: open called by PID 4579 (vmnet-natd) [17179621.468000] /dev/vmnet: port on hub 8 successfully opened [17179621.588000] /dev/vmnet: open called by PID 4603 (vmnet-dhcpd) [17179621.588000] /dev/vmnet: port on hub 8 successfully opened [17179621.596000] /dev/vmnet: open called by PID 4616 (vmnet-dhcpd) [17179621.596000] /dev/vmnet: port on hub 1 successfully opened [17179621.668000] Bluetooth: Core ver 2.8 [17179621.668000] NET: Registered protocol family 31 [17179621.668000] Bluetooth: HCI device and connection manager initialized [17179621.668000] Bluetooth: HCI socket layer initialized [17179621.680000] Bluetooth: L2CAP ver 2.8 [17179621.680000] Bluetooth: L2CAP socket layer initialized [17179621.684000] Bluetooth: RFCOMM socket layer initialized [17179621.684000] Bluetooth: RFCOMM TTY layer initialized [17179621.684000] Bluetooth: RFCOMM ver 1.7 [17179652.152000] NET: Registered protocol family 10 [17179652.152000] lo: Disabled Privacy Extensions [17179652.152000] ADDRCONF(NETDEV_UP): eth1: link is not ready [17179652.152000] ADDRCONF(NETDEV_UP): eth0: link is not ready [17179652.152000] IPv6 over IPv4 tunneling driver [17179662.232000] vmnet8: no IPv6 routers present [17179662.824000] vmnet1: no IPv6 routers present [17179689.040000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [17179703.188000] eth1: no IPv6 routers present [17179772.088000] mmcblk0: mmc0:e624 SD02G 1985024KiB [17179772.088000] mmcblk0: p1 [17179772.920000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! ubuntu@Dell:~$ ubuntu@Dell:~$ lsmod Module Size Used by nls_utf8 3200 1 nls_cp437 6912 1 vfat 14720 1 fat 56348 1 vfat ipv6 272288 10 binfmt_misc 13448 1 rfcomm 42260 0 l2cap 27136 5 rfcomm bluetooth 53476 4 rfcomm,l2cap vmnet 41900 13 vmmon 118636 0 fglrx 406988 38 powernow_k8 15008 0 cpufreq_userspace 5408 0 cpufreq_stats 7744 0 freq_table 6048 2 powernow_k8,cpufreq_stats cpufreq_powersave 2944 0 cpufreq_ondemand 8876 1 cpufreq_conservative 8712 0 video 17540 0 tc1100_wmi 8324 0 sbs 16804 0 sony_acpi 6412 0 pcc_acpi 14080 0 i2c_ec 6272 1 sbs i2c_core 23424 1 i2c_ec hotkey 11556 0 dev_acpi 12292 0 button 7952 0 battery 11652 0 container 5632 0 ac 6788 0 asus_acpi 17688 0 af_packet 24584 6 parport_pc 37796 0 lp 12964 0 parport 39496 2 parport_pc,lp tsdev 9152 0 joydev 11200 0 snd_hda_intel 20116 1 snd_hda_codec 164608 1 snd_hda_intel usblp 15488 0 snd_pcm_oss 47360 0 snd_pcm 84612 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_mixer_oss 19584 1 snd_pcm_oss snd_seq_dummy 4996 0 snd_seq_oss 36480 0 snd_seq_midi 9984 0 snd_rawmidi 27264 1 snd_seq_midi snd_seq_midi_event 8960 2 snd_seq_oss,snd_seq_midi sg 37404 0 evdev 11392 4 sdhci 20108 0 mmc_core 32136 3 sdhci b44 26764 0 mii 6912 1 b44 psmouse 41352 0 serio_raw 8452 0 snd_seq 59120 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 25348 2 snd_pcm,snd_seq snd_seq_device 9868 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 58372 12 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ndiswrapper 204436 0 pcspkr 4352 0 ati_agp 10636 0 agpgart 34888 2 fglrx,ati_agp soundcore 11232 1 snd snd_page_alloc 11400 2 snd_hda_intel,snd_pcm shpchp 42144 0 pci_hotplug 32828 1 shpchp ext3 142856 1 jbd 62228 1 ext3 usbhid 45152 0 ehci_hcd 34696 0 ohci_hcd 22532 0 usbcore 134912 6 usblp,ndiswrapper,usbhid,ehci_hcd,ohci_hcd ide_generic 2432 0 ide_cd 33696 0 cdrom 38944 1 ide_cd atiixp 7824 1 sd_mod 22656 3 generic 6276 0 ahci 20356 2 libata 74892 1 ahci scsi_mod 144648 4 sg,sd_mod,ahci,libata thermal 15624 0 processor 31560 2 powernow_k8,thermal fan 6020 0 fbcon 41504 0 tileblit 3840 1 fbcon font 9344 1 fbcon bitblit 7168 1 fbcon softcursor 3328 1 bitblit vesafb 9244 0 capability 5896 0 commoncap 8704 1 capability ubuntu@Dell:~$ ubuntu@Dell:~$ lspci -n 00:00.0 0600: 1002:5950 (rev 10) 00:01.0 0604: 1002:5a3f 00:05.0 0604: 1002:5a37 00:06.0 0604: 1002:5a38 00:12.0 0101: 1002:4380 00:13.0 0c03: 1002:4387 00:13.1 0c03: 1002:4388 00:13.2 0c03: 1002:4389 00:13.3 0c03: 1002:438a 00:13.4 0c03: 1002:438b 00:13.5 0c03: 1002:4386 00:14.0 0c05: 1002:4385 (rev 13) 00:14.1 0101: 1002:438c 00:14.2 0403: 1002:4383 00:14.3 0601: 1002:438d 00:14.4 0604: 1002:4384 00:18.0 0600: 1022:1100 00:18.1 0600: 1022:1101 00:18.2 0600: 1022:1102 00:18.3 0600: 1022:1103 01:05.0 0300: 1002:5975 05:00.0 0280: 14e4:4311 (rev 01) 08:00.0 0200: 14e4:170c (rev 02) 08:01.0 0805: 1180:0822 (rev 19) 08:01.1 0880: 1180:0843 (rev 01) ubuntu@Dell:~$ ubuntu@Dell:~$ lspci -vvnn 00:00.0 0600: 1002:5950 (rev 10) Subsystem: 1028:01f5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:05.0 0604: 1002:5a37 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:06.0 0604: 1002:5a38 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:12.0 0101: 1002:4380 (prog-if 8f) Subsystem: 1028:01f5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ SERR- 00:13.0 0c03: 1002:4387 (prog-if 10) Subsystem: 1028:01f5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:14.0 0c05: 1002:4385 (rev 13) Subsystem: 1028:01f5 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.1 0101: 1002:438c (prog-if 8a) Subsystem: 1028:01f5 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 8420 [size=16] Capabilities: 00:14.2 0403: 1002:4383 Subsystem: 1028:01f5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- 00:14.3 0601: 1002:438d Subsystem: 1028:01f5 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:18.0 0600: 1022:1100 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.1 0600: 1022:1101 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- 01:05.0 0300: 1002:5975 Subsystem: 1028:01f5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 05:00.0 0280: 14e4:4311 (rev 01) Subsystem: 1028:0007 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 08:00.0 0200: 14e4:170c (rev 02) Subsystem: 1028:01f5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 08:01.0 0805: 1180:0822 (rev 19) Subsystem: 1028:01f5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 08:01.1 0880: 1180:0843 (rev 01) Subsystem: 1028:01f5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- ubuntu@Dell:~$ ubuntu@Dell:~$ sudo lspci -vvnn Password: 00:00.0 0600: 1002:5950 (rev 10) Subsystem: 1028:01f5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [44] HyperTransport: MSI Mapping Capabilities: [b0] #0d [0000] 00:05.0 0604: 1002:5a37 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] #0d [0000] Capabilities: [b8] HyperTransport: MSI Mapping 00:06.0 0604: 1002:5a38 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] #0d [0000] Capabilities: [b8] HyperTransport: MSI Mapping 00:12.0 0101: 1002:4380 (prog-if 8f) Subsystem: 1028:01f5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 8420 [size=16] Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 00:14.2 0403: 1002:4383 Subsystem: 1028:01f5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:18.0 0600: 1022:1100 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-