[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-10-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Fri Nov 21 19:19:18 UTC 2008 (Ubuntu 2.6.27-10.20-generic) [ 0.000000] Command line: root=UUID=03c0435b-f3a3-4ed3-aef7-edea4f554b7e ro rootdelay=380 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff90000 (usable) [ 0.000000] BIOS-e820: 000000003ff90000 - 000000003ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff9e000 - 000000003ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x3ff90 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 003fe00000 page 2M [ 0.000000] 003fe00000 - 003ff90000 page 4k [ 0.000000] kernel direct mapping tables up to 3ff90000 @ 10000-13000 [ 0.000000] last_map_addr: 3ff90000 end: 3ff90000 [ 0.000000] RAMDISK: 377b0000 - 37fef9a3 [ 0.000000] ACPI: RSDP 000FAD20, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3FF90000, 0038 (r1 A_M_I_ OEMRSDT 6000714 MSFT 97) [ 0.000000] ACPI: FACP 3FF90200, 0081 (r1 A_M_I_ OEMFACP 6000714 MSFT 97) [ 0.000000] ACPI: DSDT 3FF90410, 85B9 (r1 A0402 A0402000 0 INTL 20060113) [ 0.000000] ACPI: FACS 3FF9E000, 0040 [ 0.000000] ACPI: APIC 3FF90390, 0080 (r1 A_M_I_ OEMAPIC 6000714 MSFT 97) [ 0.000000] ACPI: OEMB 3FF9E040, 0066 (r1 A_M_I_ AMI_OEM 6000714 MSFT 97) [ 0.000000] ACPI: HPET 3FF989D0, 0038 (r1 A_M_I_ OEMHPET 6000714 MSFT 97) [ 0.000000] ACPI: MCFG 3FF98A10, 003C (r1 A_M_I_ OEMMCFG 6000714 MSFT 97) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003ff90000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003ff90000 [ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff] [ 0.000000] bootmap [0000000000016000 - 000000000001dff7] pages 8 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 003ff90000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b9f5c] TEXT DATA BSS ==> [0000200000 - 00008b9f5c] [ 0.000000] #3 [00377b0000 - 0037fef9a3] RAMDISK ==> [00377b0000 - 0037fef9a3] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe20000ffffff] PMD -> [ffff880001200000-ffff8800021fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff90 [ 0.000000] On node 0 totalpages: 261919 [ 0.000000] DMA zone: 2096 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 253905 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 256001 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=03c0435b-f3a3-4ed3-aef7-edea4f554b7e ro rootdelay=380 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2007.087 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 1015564k/1048128k available (3114k kernel code, 32112k reserved, 1573k data, 540k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4014.17 BogoMIPS (lpj=8028348) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU 0/0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] CPU0: Thermal monitoring enabled (TM2) [ 0.004000] using mwait in idle threads. [ 0.004020] ACPI: Core revision 20080609 [ 0.007221] ACPI: Checking initramfs for custom DSDT [ 0.388451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.428567] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.428676] Using local APIC timer interrupts. [ 0.432028] APIC timer calibration result 12544303 [ 0.432030] Detected 12.544 MHz APIC timer. [ 0.432211] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4014.22 BogoMIPS (lpj=8028444) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.520389] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.520878] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.524069] Brought up 2 CPUs [ 0.524115] Total of 2 processors activated (8028.39 BogoMIPS). [ 0.524206] CPU0 attaching sched-domain: [ 0.524208] domain 0: span 0-1 level MC [ 0.524211] groups: 0 1 [ 0.524214] domain 1: span 0-1 level NODE [ 0.524216] groups: 0-1 [ 0.524221] CPU1 attaching sched-domain: [ 0.524222] domain 0: span 0-1 level MC [ 0.524224] groups: 1 0 [ 0.524227] domain 1: span 0-1 level NODE [ 0.524229] groups: 0-1 [ 0.524319] net_namespace: 1552 bytes [ 0.524319] Booting paravirtualized kernel on bare hardware [ 0.524398] Time: 17:55:00 Date: 11/27/08 [ 0.524476] NET: Registered protocol family 16 [ 0.524541] ACPI: bus type pci registered [ 0.524541] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. [ 0.524541] PCI: Using configuration type 1 for base access [ 0.528123] ACPI: EC: Look up EC in DSDT [ 0.543136] ACPI: Interpreter enabled [ 0.543188] ACPI: (supports S0 S1 S3 S4 S5) [ 0.543394] ACPI: Using IOAPIC for interrupt routing [ 0.552169] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.552216] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.552216] pci 0000:00:01.0: PME# disabled [ 0.552269] PCI: 0000:00:1b.0 reg 10 64bit mmio: [dddf8000, dddfbfff] [ 0.552305] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.552354] pci 0000:00:1b.0: PME# disabled [ 0.552444] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.552493] pci 0000:00:1c.0: PME# disabled [ 0.552584] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.552634] pci 0000:00:1c.3: PME# disabled [ 0.552714] PCI: 0000:00:1d.0 reg 20 io port: [6400, 641f] [ 0.552760] PCI: 0000:00:1d.1 reg 20 io port: [6800, 681f] [ 0.552805] PCI: 0000:00:1d.2 reg 20 io port: [7000, 701f] [ 0.552851] PCI: 0000:00:1d.3 reg 20 io port: [7400, 741f] [ 0.552901] PCI: 0000:00:1d.7 reg 10 32bit mmio: [dddffc00, dddfffff] [ 0.552946] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.552996] pci 0000:00:1d.7: PME# disabled [ 0.553150] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.553211] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.553284] PCI: 0000:00:1f.1 reg 10 io port: [9000, 9007] [ 0.553290] PCI: 0000:00:1f.1 reg 14 io port: [8800, 8803] [ 0.553296] PCI: 0000:00:1f.1 reg 18 io port: [8400, 8407] [ 0.553302] PCI: 0000:00:1f.1 reg 1c io port: [8000, 8003] [ 0.553308] PCI: 0000:00:1f.1 reg 20 io port: [7800, 780f] [ 0.553346] PCI: 0000:00:1f.2 reg 10 io port: [a800, a807] [ 0.553351] PCI: 0000:00:1f.2 reg 14 io port: [a400, a403] [ 0.553356] PCI: 0000:00:1f.2 reg 18 io port: [a000, a007] [ 0.553362] PCI: 0000:00:1f.2 reg 1c io port: [9800, 9803] [ 0.553367] PCI: 0000:00:1f.2 reg 20 io port: [9400, 940f] [ 0.553387] pci 0000:00:1f.2: PME# supported from D3hot [ 0.553436] pci 0000:00:1f.2: PME# disabled [ 0.553519] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f] [ 0.553567] PCI: 0000:04:00.0 reg 10 32bit mmio: [df000000, dfffffff] [ 0.553576] PCI: 0000:04:00.0 reg 14 64bit mmio: [e0000000, efffffff] [ 0.553584] PCI: 0000:04:00.0 reg 1c 64bit mmio: [de000000, deffffff] [ 0.553593] PCI: 0000:04:00.0 reg 30 32bit mmio: [ddfe0000, ddffffff] [ 0.553637] PCI: bridge 0000:00:01.0 io port: [e000, efff] [ 0.553640] PCI: bridge 0000:00:01.0 32bit mmio: [ddf00000, dfffffff] [ 0.553644] PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff] [ 0.553683] PCI: bridge 0000:00:1c.0 io port: [d000, dfff] [ 0.553744] PCI: 0000:02:00.0 reg 10 io port: [c800, c8ff] [ 0.553766] PCI: 0000:02:00.0 reg 18 64bit mmio: [ddeff000, ddefffff] [ 0.553789] PCI: 0000:02:00.0 reg 30 32bit mmio: [ddee0000, ddeeffff] [ 0.553809] pci 0000:02:00.0: supports D1 [ 0.553811] pci 0000:02:00.0: supports D2 [ 0.553813] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.553864] pci 0000:02:00.0: PME# disabled [ 0.553940] PCI: bridge 0000:00:1c.3 io port: [c000, cfff] [ 0.553944] PCI: bridge 0000:00:1c.3 32bit mmio: [dde00000, ddefffff] [ 0.553995] pci 0000:00:1e.0: transparent bridge [ 0.554043] PCI: bridge 0000:00:1e.0 io port: [b000, bfff] [ 0.554073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.554305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.554423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.554612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.554732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.556276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.556713] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.560150] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.560690] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.561242] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.561782] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.562391] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.562930] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.563391] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F3, should be EE [20080609] [ 0.563391] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.563391] pnp: PnP ACPI init [ 0.563391] ACPI: bus type pnp registered [ 0.568527] pnp: PnP ACPI: found 17 devices [ 0.568527] ACPI: ACPI bus type pnp unregistered [ 0.568530] PCI: Using ACPI for IRQ routing [ 0.588064] NET: Registered protocol family 8 [ 0.588115] NET: Registered protocol family 20 [ 0.588187] NetLabel: Initializing [ 0.588187] NetLabel: domain hash size = 128 [ 0.588187] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.588198] NetLabel: unlabeled traffic allowed by default [ 0.588261] PCI-GART: No AMD northbridge found. [ 0.588310] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.588474] hpet0: 3 64-bit timers, 14318180 Hz [ 0.592044] Switched to high resolution mode on CPU 0 [ 0.592401] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.592982] Switched to high resolution mode on CPU 1 [ 0.593749] actual entries 65586 [ 0.593910] AppArmor: AppArmor Filesystem Enabled [ 0.593979] ACPI: RTC can wake from S4 [ 0.612061] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.612129] system 00:07: ioport range 0x290-0x297 has been reserved [ 0.612191] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.612240] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.612288] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.612337] system 00:08: ioport range 0x900-0x91f has been reserved [ 0.612386] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.612435] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.612485] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.612545] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.612609] system 00:09: ioport range 0x3f6-0x3f6 has been reserved [ 0.612664] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.612713] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.612767] system 00:0f: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.612820] system 00:10: iomem range 0x0-0x9ffff could not be reserved [ 0.612869] system 00:10: iomem range 0xc0000-0xdffff has been reserved [ 0.612917] system 00:10: iomem range 0xe0000-0xfffff could not be reserved [ 0.612967] system 00:10: iomem range 0x100000-0x3fffffff could not be reserved [ 0.618139] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04 [ 0.618189] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.618238] pci 0000:00:01.0: MEM window: 0xddf00000-0xdfffffff [ 0.618287] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.618348] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 0.618397] pci 0000:00:1c.0: IO window: 0xd000-0xdfff [ 0.618446] pci 0000:00:1c.0: MEM window: disabled [ 0.618494] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.618545] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02 [ 0.618593] pci 0000:00:1c.3: IO window: 0xc000-0xcfff [ 0.618643] pci 0000:00:1c.3: MEM window: 0xdde00000-0xddefffff [ 0.618692] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.618743] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.618791] pci 0000:00:1e.0: IO window: 0xb000-0xbfff [ 0.618840] pci 0000:00:1e.0: MEM window: disabled [ 0.618888] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.618952] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.619003] pci 0000:00:01.0: setting latency timer to 64 [ 0.619010] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.619061] pci 0000:00:1c.0: setting latency timer to 64 [ 0.619068] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.619119] pci 0000:00:1c.3: setting latency timer to 64 [ 0.619125] pci 0000:00:1e.0: setting latency timer to 64 [ 0.619128] bus: 00 index 0 io port: [0, ffff] [ 0.619174] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.619220] bus: 04 index 0 io port: [e000, efff] [ 0.619266] bus: 04 index 1 mmio: [ddf00000, dfffffff] [ 0.619313] bus: 04 index 2 mmio: [e0000000, efffffff] [ 0.619359] bus: 04 index 3 mmio: [0, 0] [ 0.619404] bus: 03 index 0 io port: [d000, dfff] [ 0.619450] bus: 03 index 1 mmio: [0, 0] [ 0.619494] bus: 03 index 2 mmio: [0, 0] [ 0.619539] bus: 03 index 3 mmio: [0, 0] [ 0.619584] bus: 02 index 0 io port: [c000, cfff] [ 0.619630] bus: 02 index 1 mmio: [dde00000, ddefffff] [ 0.619676] bus: 02 index 2 mmio: [0, 0] [ 0.619721] bus: 02 index 3 mmio: [0, 0] [ 0.619766] bus: 01 index 0 io port: [b000, bfff] [ 0.619811] bus: 01 index 1 mmio: [0, 0] [ 0.619856] bus: 01 index 2 mmio: [0, 0] [ 0.619901] bus: 01 index 3 io port: [0, ffff] [ 0.619946] bus: 01 index 4 mmio: [0, ffffffffffffffff] [ 0.620011] NET: Registered protocol family 2 [ 0.660159] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.660708] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.662100] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.662821] TCP: Hash tables configured (established 131072 bind 65536) [ 0.662873] TCP reno registered [ 0.672205] NET: Registered protocol family 1 [ 0.672376] checking if image is initramfs... it is [ 1.442911] Freeing initrd memory: 8446k freed [ 1.448233] audit: initializing netlink socket (disabled) [ 1.448313] type=2000 audit(1227808501.448:1): initialized [ 1.454385] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.456793] VFS: Disk quotas dquot_6.5.1 [ 1.456926] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.457087] msgmni has been set to 2000 [ 1.457251] io scheduler noop registered [ 1.457297] io scheduler anticipatory registered [ 1.457343] io scheduler deadline registered [ 1.457508] io scheduler cfq registered (default) [ 1.457668] pci 0000:04:00.0: Boot video device [ 1.457769] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.457800] pcieport-driver 0000:00:01.0: found MSI capability [ 1.457876] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.457959] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.457988] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.458066] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.458103] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.458186] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.458215] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.458292] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.490262] hpet_resources: 0xfed00000 is busy [ 1.490338] Linux agpgart interface v0.103 [ 1.490435] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.490628] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.491459] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.493219] brd: module loaded [ 1.493330] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.493518] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.496113] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.496163] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.520221] mice: PS/2 mouse device common for all mice [ 1.520407] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.520480] rtc0: alarms up to one month, hpet irqs [ 1.520570] cpuidle: using governor ladder [ 1.520616] cpuidle: using governor menu [ 1.521031] TCP cubic registered [ 1.521293] registered taskstats version 1 [ 1.521449] Magic number: 0:754:947 [ 1.521517] tty ttya2: hash matches [ 1.521635] tty tty4: hash matches [ 1.521730] rtc_cmos 00:03: setting system clock to 2008-11-27 17:55:01 UTC (1227808501) [ 1.521791] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.521838] EDD information not available. [ 1.521920] Freeing unused kernel memory: 540k freed [ 1.522138] Write protecting the kernel read-only data: 4348k [ 1.556574] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.606879] fuse init (API version 7.9) [ 1.626924] ACPI: SSDT 3FF9E0B0, 0208 (r1 AMI CPU1PM 1 INTL 20060113) [ 1.627412] processor ACPI0007:00: registered as cooling_device0 [ 1.627462] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.627877] ACPI: SSDT 3FF9E2C0, 013A (r1 AMI CPU2PM 1 INTL 20060113) [ 1.628382] processor ACPI0007:01: registered as cooling_device1 [ 1.628433] ACPI: Processor [CPU2] (supports 8 throttling states) [ 1.858065] usbcore: registered new interface driver usbfs [ 1.858145] usbcore: registered new interface driver hub [ 1.858233] usbcore: registered new device driver usb [ 1.867513] USB Universal Host Controller Interface driver v3.0 [ 1.867616] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.867672] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.867676] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.867773] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.867863] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006400 [ 1.868059] usb usb1: configuration #1 chosen from 1 choice [ 1.868132] hub 1-0:1.0: USB hub found [ 1.868182] hub 1-0:1.0: 2 ports detected [ 1.885448] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.900300] No dock devices found. [ 1.923292] SCSI subsystem initialized [ 1.936777] libata version 3.00 loaded. [ 2.076991] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.077052] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.077056] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.077131] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 2.077222] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006800 [ 2.077364] usb usb2: configuration #1 chosen from 1 choice [ 2.077440] hub 2-0:1.0: USB hub found [ 2.077490] hub 2-0:1.0: 2 ports detected [ 2.188039] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 2.284895] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.284955] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.284959] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.285034] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 2.285126] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007000 [ 2.285269] usb usb3: configuration #1 chosen from 1 choice [ 2.285344] hub 3-0:1.0: USB hub found [ 2.285395] hub 3-0:1.0: 2 ports detected [ 2.366122] usb 1-2: configuration #1 chosen from 1 choice [ 2.388963] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.389027] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.389030] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.389105] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 2.389199] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00007400 [ 2.389347] usb usb4: configuration #1 chosen from 1 choice [ 2.389422] hub 4-0:1.0: USB hub found [ 2.389474] hub 4-0:1.0: 2 ports detected [ 2.480051] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2.492442] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.492520] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.492524] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.492606] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 2.497894] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.497946] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.497956] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdddffc00 [ 2.512524] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.512739] usb usb5: configuration #1 chosen from 1 choice [ 2.512813] hub 5-0:1.0: USB hub found [ 2.512864] hub 5-0:1.0: 8 ports detected [ 2.568081] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 2.632075] usb 1-2: USB disconnect, address 2 [ 2.721163] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.721254] pata_acpi 0000:00:1f.1: setting latency timer to 64 [ 2.721267] pata_acpi 0000:00:1f.1: PCI INT A disabled [ 2.721340] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 2.721414] pata_acpi 0000:00:1f.2: setting latency timer to 64 [ 2.721423] pata_acpi 0000:00:1f.2: PCI INT B disabled [ 2.721484] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.721542] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.721605] r8169 0000:02:00.0: setting latency timer to 64 [ 2.721938] eth0: RTL8168b/8111b at 0xffffc200004f6000, 00:1b:fc:da:89:29, XID 38000000 IRQ 2300 [ 2.734369] ata_piix 0000:00:1f.1: version 2.12 [ 2.734386] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.734482] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.735462] scsi0 : ata_piix [ 2.735634] scsi1 : ata_piix [ 2.737379] ata1: PATA max UDMA/100 cmd 0x9000 ctl 0x8800 bmdma 0x7800 irq 22 [ 2.737429] ata2: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7808 irq 22 [ 3.224642] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 3.311605] irq 22: nobody cared (try booting with the "irqpoll" option) [ 3.311663] Pid: 1, comm: init Not tainted 2.6.27-10-generic #1 [ 3.311714] [ 3.311715] Call Trace: [ 3.311805] [] __report_bad_irq+0x2b/0x90 [ 3.311889] [] note_interrupt+0x137/0x170 [ 3.311937] [] handle_fasteoi_irq+0xed/0x110 [ 3.311987] [] do_IRQ+0x86/0x100 [ 3.312034] [] ret_from_intr+0x0/0x29 [ 3.312080] [ 3.312152] handlers: [ 3.312195] [] (ata_sff_interrupt+0x0/0x2d0 [libata]) [ 3.312321] Disabling IRQ #22 [ 3.332942] ata1.00: ATAPI: DVD-ROM BDV316E, VER 0052, max UDMA/66 [ 3.333001] ata1.01: ATAPI: DVD-RW IDE1108, VER B018, max UDMA/66 [ 3.333054] ata1.00: limited to UDMA/33 due to 40-wire cable [ 3.333102] ata1.01: limited to UDMA/33 due to 40-wire cable [ 3.348303] ata1.00: configured for UDMA/33 [ 3.364281] ata1.01: configured for UDMA/33 [ 3.402740] usb 1-2: configuration #1 chosen from 1 choice [ 3.530850] isa bounce pool size: 16 pages [ 3.644031] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 4.179082] usb 2-1: configuration #1 chosen from 1 choice [ 9.028051] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 9.028116] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 9.028118] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 9.028120] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 9.028283] ata1.00: status: { DRDY } [ 9.028352] ata1: soft resetting link [ 10.528285] ata1.00: configured for UDMA/33 [ 10.832281] ata1.01: configured for UDMA/33 [ 10.832340] ata1: EH complete [ 16.332046] ata1.00: limiting speed to UDMA/25:PIO4 [ 16.332102] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 16.332161] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 16.332163] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 16.332165] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 16.332325] ata1.00: status: { DRDY } [ 16.332393] ata1: soft resetting link [ 16.984273] ata1.00: configured for UDMA/25 [ 17.032276] ata1.01: configured for UDMA/33 [ 17.032332] ata1: EH complete [ 22.532057] ata1.00: limiting speed to PIO4 [ 22.532112] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 22.532172] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 22.532174] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 22.532175] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 22.532336] ata1.00: status: { DRDY } [ 22.532403] ata1: soft resetting link [ 22.712283] ata1.00: configured for PIO4 [ 22.760275] ata1.01: configured for UDMA/33 [ 22.760329] ata1: EH complete [ 28.260058] ata1.00: limiting speed to PIO3 [ 28.260114] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 28.260174] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 28.260176] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 28.260178] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 28.260338] ata1.00: status: { DRDY } [ 28.260405] ata1: soft resetting link [ 28.432283] ata1.00: configured for PIO3 [ 28.448270] ata1.01: configured for UDMA/33 [ 28.448333] ata1: EH complete [ 33.948058] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 33.948122] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 33.948123] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 33.948125] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 33.948289] ata1.01: status: { DRDY } [ 33.948356] ata1: soft resetting link [ 34.128300] ata1.00: configured for PIO3 [ 34.136418] ata1.01: configured for UDMA/33 [ 34.136473] ata1: EH complete [ 39.636555] ata1.01: limiting speed to UDMA/25:PIO4 [ 39.636612] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 39.636671] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 39.636673] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 39.636675] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 39.636835] ata1.01: status: { DRDY } [ 39.636902] ata1: soft resetting link [ 39.816283] ata1.00: configured for PIO3 [ 39.832803] ata1.01: configured for UDMA/25 [ 39.832859] ata1: EH complete [ 45.332048] ata1.01: limiting speed to PIO4 [ 45.332103] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 45.332163] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 45.332164] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 45.332166] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 45.332326] ata1.01: status: { DRDY } [ 45.332394] ata1: soft resetting link [ 45.504787] ata1.00: configured for PIO3 [ 45.520271] ata1.01: configured for PIO4 [ 45.520325] ata1: EH complete [ 51.020046] ata1.01: limiting speed to PIO3 [ 51.020102] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 51.020161] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 51.020163] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 51.020165] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 51.020325] ata1.01: status: { DRDY } [ 51.020393] ata1: soft resetting link [ 51.192282] ata1.00: configured for PIO3 [ 51.208270] ata1.01: configured for PIO3 [ 51.208331] ata1: EH complete [ 56.812047] ata1.00: limiting speed to PIO0 [ 56.812102] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 56.812162] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 56.812163] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 56.812165] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 56.812325] ata1.00: status: { DRDY } [ 56.812393] ata1: soft resetting link [ 58.520365] ata1.00: configured for PIO0 [ 58.536270] ata1.01: configured for PIO3 [ 58.536326] ata1: EH complete [ 64.036047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 64.036110] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 64.036112] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 64.036114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 64.036278] ata1.00: status: { DRDY } [ 64.036346] ata1: soft resetting link [ 64.216856] ata1.00: configured for PIO0 [ 64.224282] ata1.01: configured for PIO3 [ 64.224336] ata1: EH complete [ 69.724062] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 69.724126] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 69.724128] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 69.724130] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 69.724293] ata1.00: status: { DRDY } [ 69.724361] ata1: soft resetting link [ 69.904353] ata1.00: configured for PIO0 [ 69.920270] ata1.01: configured for PIO3 [ 69.920325] ata1: EH complete [ 75.420047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 75.420111] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 75.420113] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 75.420115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 75.420278] ata1.00: status: { DRDY } [ 75.420346] ata1: soft resetting link [ 75.600352] ata1.00: configured for PIO0 [ 75.616270] ata1.01: configured for PIO3 [ 75.616330] ata1: EH complete [ 81.116060] ata1.01: limiting speed to PIO0 [ 81.116116] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 81.116176] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 81.116178] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 81.116180] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 81.117634] ata1.01: status: { DRDY } [ 81.117702] ata1: soft resetting link [ 81.296353] ata1.00: configured for PIO0 [ 81.312340] ata1.01: configured for PIO0 [ 81.312395] ata1: EH complete [ 86.812046] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 86.812110] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 86.812112] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 86.812113] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.812277] ata1.01: status: { DRDY } [ 86.812344] ata1: soft resetting link [ 86.992353] ata1.00: configured for PIO0 [ 87.008340] ata1.01: configured for PIO0 [ 87.008395] ata1: EH complete [ 92.508560] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 92.508624] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 92.508626] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 92.508627] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 92.508791] ata1.01: status: { DRDY } [ 92.508858] ata1: soft resetting link [ 92.688352] ata1.00: configured for PIO0 [ 92.704863] ata1.01: configured for PIO0 [ 92.704919] ata1: EH complete [ 98.204059] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 98.204121] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 98.204123] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 98.204125] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.204289] ata1.01: status: { DRDY } [ 98.204356] ata1: soft resetting link [ 98.384352] ata1.00: configured for PIO0 [ 98.400340] ata1.01: configured for PIO0 [ 98.400401] ata1: EH complete [ 104.004547] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 104.004611] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 104.004613] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 104.004615] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 104.004779] ata1.00: status: { DRDY } [ 104.004846] ata1: soft resetting link [ 104.176353] ata1.00: configured for PIO0 [ 104.192340] ata1.01: configured for PIO0 [ 104.192395] ata1: EH complete [ 109.692059] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 109.692123] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 109.692125] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 109.692127] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 109.692290] ata1.00: status: { DRDY } [ 109.692357] ata1: soft resetting link [ 109.864857] ata1.00: configured for PIO0 [ 109.880340] ata1.01: configured for PIO0 [ 109.880395] ata1: EH complete [ 115.380554] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 115.380618] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 115.380620] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 115.380622] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 115.380786] ata1.00: status: { DRDY } [ 115.380854] ata1: soft resetting link [ 115.560352] ata1.00: configured for PIO0 [ 115.576861] ata1.01: configured for PIO0 [ 115.576918] ata1: EH complete [ 121.076058] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 121.076122] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 121.076124] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 121.076126] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 121.076289] ata1.00: status: { DRDY } [ 121.076357] ata1: soft resetting link [ 121.248353] ata1.00: configured for PIO0 [ 121.256351] ata1.01: configured for PIO0 [ 121.256413] ata1: EH complete [ 126.756047] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 126.756111] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 126.756113] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 126.756114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.756278] ata1.01: status: { DRDY } [ 126.756345] ata1: soft resetting link [ 126.936352] ata1.00: configured for PIO0 [ 126.944499] ata1.01: configured for PIO0 [ 126.944557] ata1: EH complete [ 132.444058] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 132.444122] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 132.444124] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 132.444126] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 132.444289] ata1.01: status: { DRDY } [ 132.444357] ata1: soft resetting link [ 132.624352] ata1.00: configured for PIO0 [ 132.640857] ata1.01: configured for PIO0 [ 132.640914] ata1: EH complete [ 138.140058] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 138.140122] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 138.140124] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 138.140126] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 138.140289] ata1.01: status: { DRDY } [ 138.140357] ata1: soft resetting link [ 138.312352] ata1.00: configured for PIO0 [ 138.328340] ata1.01: configured for PIO0 [ 138.328394] ata1: EH complete [ 143.828058] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 143.828122] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 143.828124] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 143.828125] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 143.828289] ata1.01: status: { DRDY } [ 143.828356] ata1: soft resetting link [ 144.000352] ata1.00: configured for PIO0 [ 144.016340] ata1.01: configured for PIO0 [ 144.016400] ata1: EH complete [ 149.620047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 149.620111] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 149.620113] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 149.620115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.620278] ata1.00: status: { DRDY } [ 149.620346] ata1: soft resetting link [ 149.800343] ata1.00: configured for PIO0 [ 149.816340] ata1.01: configured for PIO0 [ 149.816395] ata1: EH complete [ 155.316047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 155.316111] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 155.316113] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 155.316115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 155.316278] ata1.00: status: { DRDY } [ 155.316345] ata1: soft resetting link [ 155.488352] ata1.00: configured for PIO0 [ 155.504862] ata1.01: configured for PIO0 [ 155.504919] ata1: EH complete [ 161.004556] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 161.004619] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 161.004621] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 161.004623] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 161.004786] ata1.00: status: { DRDY } [ 161.004853] ata1: soft resetting link [ 161.176353] ata1.00: configured for PIO0 [ 161.192340] ata1.01: configured for PIO0 [ 161.192395] ata1: EH complete [ 166.692060] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 166.692124] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 166.692126] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 166.692127] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 166.692291] ata1.00: status: { DRDY } [ 166.692359] ata1: soft resetting link [ 166.872352] ata1.00: configured for PIO0 [ 166.888340] ata1.01: configured for PIO0 [ 166.888401] ata1: EH complete [ 172.388048] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 172.388112] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 172.388114] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 172.388115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 172.388279] ata1.01: status: { DRDY } [ 172.388347] ata1: soft resetting link [ 172.568856] ata1.00: configured for PIO0 [ 172.576352] ata1.01: configured for PIO0 [ 172.576407] ata1: EH complete [ 178.076558] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 178.076622] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 178.076623] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 178.076625] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 178.076789] ata1.01: status: { DRDY } [ 178.076857] ata1: soft resetting link [ 178.248352] ata1.00: configured for PIO0 [ 178.264340] ata1.01: configured for PIO0 [ 178.264395] ata1: EH complete [ 183.764050] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 183.764115] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 183.764117] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 183.764119] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 183.765571] ata1.01: status: { DRDY } [ 183.765640] ata1: soft resetting link [ 183.944352] ata1.00: configured for PIO0 [ 183.952350] ata1.01: configured for PIO0 [ 183.952406] ata1: EH complete [ 189.452048] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 189.452112] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 189.452114] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 189.452115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 189.452279] ata1.01: status: { DRDY } [ 189.452347] ata1: soft resetting link [ 189.624368] ata1.00: configured for PIO0 [ 189.640340] ata1.01: configured for PIO0 [ 189.640401] ata1: EH complete [ 195.244060] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 195.244123] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 195.244125] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 195.244127] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 195.244290] ata1.00: status: { DRDY } [ 195.244358] ata1: soft resetting link [ 195.416352] ata1.00: configured for PIO0 [ 195.432864] ata1.01: configured for PIO0 [ 195.432921] ata1: EH complete [ 200.932046] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 200.932109] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 200.932112] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 200.932113] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 200.932277] ata1.00: status: { DRDY } [ 200.932345] ata1: soft resetting link [ 201.104352] ata1.00: configured for PIO0 [ 201.120340] ata1.01: configured for PIO0 [ 201.120396] ata1: EH complete [ 206.620058] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 206.620122] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 206.620124] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 206.620125] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 206.620289] ata1.00: status: { DRDY } [ 206.620356] ata1: soft resetting link [ 206.800353] ata1.00: configured for PIO0 [ 206.816340] ata1.01: configured for PIO0 [ 206.816395] ata1: EH complete [ 212.316060] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 212.316124] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 212.316126] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 212.316128] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 212.316291] ata1.00: status: { DRDY } [ 212.316358] ata1: soft resetting link [ 212.488860] ata1.00: configured for PIO0 [ 212.504855] ata1.01: configured for PIO0 [ 212.504917] ata1: EH complete [ 218.004557] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 218.004621] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 218.004623] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 218.004624] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 218.004788] ata1.01: status: { DRDY } [ 218.004856] ata1: soft resetting link [ 218.176353] ata1.00: configured for PIO0 [ 218.192340] ata1.01: configured for PIO0 [ 218.192394] ata1: EH complete [ 223.692060] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 223.692123] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 223.692125] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 223.692127] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 223.692290] ata1.01: status: { DRDY } [ 223.692358] ata1: soft resetting link [ 223.872352] ata1.00: configured for PIO0 [ 223.880351] ata1.01: configured for PIO0 [ 223.880406] ata1: EH complete [ 229.380059] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 229.380123] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 229.380125] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 229.380126] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 229.380290] ata1.01: status: { DRDY } [ 229.380357] ata1: soft resetting link [ 229.560352] ata1.00: configured for PIO0 [ 229.568351] ata1.01: configured for PIO0 [ 229.568407] ata1: EH complete [ 235.068047] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 235.068111] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 235.068113] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 235.068115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 235.068278] ata1.01: status: { DRDY } [ 235.068346] ata1: soft resetting link [ 235.248352] ata1.00: configured for PIO0 [ 235.256874] ata1.01: configured for PIO0 [ 235.256936] ata1: EH complete [ 240.860070] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 240.860134] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 240.860136] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 240.860137] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 240.860301] ata1.00: status: { DRDY } [ 240.860368] ata1: soft resetting link [ 241.040353] ata1.00: configured for PIO0 [ 241.056340] ata1.01: configured for PIO0 [ 241.056395] ata1: EH complete [ 246.556047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 246.556111] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 246.556112] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 246.556114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 246.556278] ata1.00: status: { DRDY } [ 246.556345] ata1: soft resetting link [ 246.728353] ata1.00: configured for PIO0 [ 246.744340] ata1.01: configured for PIO0 [ 246.744395] ata1: EH complete [ 252.244047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 252.244110] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 252.244112] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 252.244114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 252.244277] ata1.00: status: { DRDY } [ 252.244345] ata1: soft resetting link [ 252.424353] ata1.00: configured for PIO0 [ 252.440340] ata1.01: configured for PIO0 [ 252.440395] ata1: EH complete [ 257.940557] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 257.940621] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 257.940623] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 257.940624] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 257.940788] ata1.00: status: { DRDY } [ 257.940855] ata1: soft resetting link [ 258.112353] ata1.00: configured for PIO0 [ 258.120351] ata1.01: configured for PIO0 [ 258.120412] ata1: EH complete [ 263.620060] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 263.620125] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 263.620127] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 263.620128] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 263.620291] ata1.01: status: { DRDY } [ 263.620359] ata1: soft resetting link [ 264.272369] ata1.00: configured for PIO0 [ 264.288340] ata1.01: configured for PIO0 [ 264.288396] ata1: EH complete [ 269.788047] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 269.788110] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 269.788112] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 269.788114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 269.788278] ata1.01: status: { DRDY } [ 269.788345] ata1: soft resetting link [ 269.960352] ata1.00: configured for PIO0 [ 269.968519] ata1.01: configured for PIO0 [ 269.968575] ata1: EH complete [ 275.468047] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 275.468111] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 275.468113] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 275.468115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 275.468278] ata1.01: status: { DRDY } [ 275.468345] ata1: soft resetting link [ 275.640353] ata1.00: configured for PIO0 [ 275.648499] ata1.01: configured for PIO0 [ 275.648558] ata1: EH complete [ 281.148047] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 281.148111] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 281.148113] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 281.148115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.148278] ata1.01: status: { DRDY } [ 281.148345] ata1: soft resetting link [ 281.328352] ata1.00: configured for PIO0 [ 281.336351] ata1.01: configured for PIO0 [ 281.336413] ata1: EH complete [ 281.336482] ata1: WARNING: synchronous SCSI scan failed without making any progress, [ 281.336483] switching to async [ 281.336625] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 281.337971] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 281.338205] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 281.338273] scsi2 : ata_piix [ 281.339499] scsi3 : ata_piix [ 281.339633] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 23 [ 281.339686] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 23 [ 281.664308] ata4.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7 [ 281.664365] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 281.672304] ata4.00: configured for UDMA/133 [ 281.672498] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5 [ 281.672746] scsi 3:0:0:0: Attached scsi generic sg0 type 0 [ 281.682398] Driver 'sd' needs updating - please use bus_type methods [ 281.682583] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 281.682648] sd 3:0:0:0: [sda] Write Protect is off [ 281.682695] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 281.682721] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 281.682852] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 281.682915] sd 3:0:0:0: [sda] Write Protect is off [ 281.682966] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 281.682993] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 281.683060] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > [ 281.743664] sd 3:0:0:0: [sda] Attached SCSI disk [ 282.113784] kjournald starting. Commit interval 5 seconds [ 282.113800] EXT3-fs: mounted filesystem with ordered data mode. [ 284.746108] udevd version 124 started [ 285.114633] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 285.156170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 285.280260] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 285.304063] ACPI: Power Button (FF) [PWRF] [ 285.304275] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 285.336035] ACPI: Power Button (CM) [PWRB] [ 285.442312] parport_pc 00:06: reported by Plug and Play ACPI [ 285.442476] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 285.585706] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 285.585788] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 285.645133] iTCO_vendor_support: vendor-support=0 [ 285.666146] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 285.666292] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 285.666466] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 285.705134] intel_rng: FWH not detected [ 285.835305] Linux video capture interface: v2.00 [ 285.953955] pwc: Philips webcam module version 10.0.13 loaded. [ 285.954011] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 285.954075] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 285.954141] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 285.970054] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 286.116090] pwc: Philips PCVC680K (Vesta Pro) USB webcam detected. [ 286.196707] pwc: Registered as /dev/video0. [ 286.196942] usbcore: registered new interface driver Philips webcam [ 286.196944] usbcore: registered new interface driver snd-usb-audio [ 286.680334] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 287.716757] loop: module loaded [ 287.735120] lp0: using parport0 (interrupt-driven). [ 287.904015] Adding 2032180k swap on /dev/sda5. Priority:-1 extents:1 across:2032180k [ 288.244982] EXT3 FS on sda2, internal journal [ 288.304546] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 288.304611] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 288.304612] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 288.304613] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 288.304774] ata1.00: status: { DRDY } [ 288.304847] ata1: soft resetting link [ 288.476857] ata1.00: configured for PIO0 [ 288.484994] ata1.01: configured for PIO0 [ 288.485003] ata1: EH complete [ 289.575272] kjournald starting. Commit interval 5 seconds [ 289.575437] EXT3 FS on sda1, internal journal [ 289.575444] EXT3-fs: mounted filesystem with ordered data mode. [ 289.639268] kjournald starting. Commit interval 5 seconds [ 289.639469] EXT3 FS on sda8, internal journal [ 289.639476] EXT3-fs: mounted filesystem with ordered data mode. [ 289.705813] kjournald starting. Commit interval 5 seconds [ 289.706026] EXT3 FS on sda7, internal journal [ 289.706033] EXT3-fs: mounted filesystem with ordered data mode. [ 289.870138] kjournald starting. Commit interval 5 seconds [ 289.872103] EXT3 FS on sda9, internal journal [ 289.872111] EXT3-fs: mounted filesystem with ordered data mode. [ 291.546744] type=1505 audit(1227808791.939:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=6580 [ 291.693958] type=1505 audit(1227808792.087:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=6585 [ 291.694165] type=1505 audit(1227808792.087:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=6585 [ 291.745769] type=1505 audit(1227808792.139:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=6589 [ 293.984628] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 293.984705] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 293.984707] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 293.984709] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.984871] ata1.00: status: { DRDY } [ 293.984940] ata1: soft resetting link [ 294.156871] ata1.00: configured for PIO0 [ 294.164855] ata1.01: configured for PIO0 [ 294.164867] ata1: EH complete [ 294.217769] ip_tables: (C) 2000-2006 Netfilter Core Team [ 295.161426] ACPI: WMI: Mapper loaded [ 296.265661] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 296.556266] NET: Registered protocol family 10 [ 296.556859] lo: Disabled Privacy Extensions [ 298.825381] ppdev: user-space parallel port driver [ 299.664042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 299.664110] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 299.664112] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 299.664114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 299.664279] ata1.00: status: { DRDY } [ 299.664356] ata1: soft resetting link [ 299.836938] ata1.00: configured for PIO0 [ 299.844980] ata1.01: configured for PIO0 [ 299.845007] ata1: EH complete [ 304.009810] type=1503 audit(1227808804.403:6): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=8131 profile="/usr/sbin/cupsd" [ 304.481007] type=1503 audit(1227808804.875:7): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=8139 profile="/usr/sbin/cupsd" [ 304.602208] type=1503 audit(1227808804.995:8): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=8147 profile="/usr/sbin/cupsd" [ 304.614942] type=1503 audit(1227808805.007:9): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=8147 profile="/usr/sbin/cupsd" [ 304.722247] type=1503 audit(1227808805.115:10): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=8157 profile="/usr/sbin/cupsd" [ 305.240691] Bluetooth: Core ver 2.13 [ 305.242359] NET: Registered protocol family 31 [ 305.242365] Bluetooth: HCI device and connection manager initialized [ 305.242369] Bluetooth: HCI socket layer initialized [ 305.252462] Bluetooth: L2CAP ver 2.11 [ 305.252467] Bluetooth: L2CAP socket layer initialized [ 305.270975] Bluetooth: SCO (Voice Link) ver 0.6 [ 305.270981] Bluetooth: SCO socket layer initialized [ 305.288835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 305.288843] Bluetooth: BNEP filters: protocol multicast [ 305.344538] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 305.344612] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 305.344614] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 305.344615] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 305.344769] ata1.00: status: { DRDY } [ 305.344838] ata1: soft resetting link [ 305.346002] Bridge firewalling registered [ 305.346183] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 305.355489] Bluetooth: RFCOMM socket layer initialized [ 305.355513] Bluetooth: RFCOMM TTY layer initialized [ 305.355515] Bluetooth: RFCOMM ver 1.10 [ 305.528916] ata1.00: configured for PIO0 [ 305.536863] ata1.01: configured for PIO0 [ 305.536893] ata1: EH complete [ 306.061603] type=1503 audit(1227808806.455:11): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=8337 profile="/usr/sbin/cupsd" [ 309.533378] r8169: eth0: link up [ 309.533391] r8169: eth0: link up [ 309.949892] NET: Registered protocol family 17 [ 311.036039] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 311.036054] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 311.036056] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 311.036058] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 311.036063] ata1.01: status: { DRDY } [ 311.036097] ata1: soft resetting link [ 311.216845] ata1.00: configured for PIO0 [ 311.232845] ata1.01: configured for PIO0 [ 311.232863] ata1: EH complete [ 316.732095] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 316.732111] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 316.732113] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 316.732115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 316.732120] ata1.01: status: { DRDY } [ 316.732154] ata1: soft resetting link [ 316.912833] ata1.00: configured for PIO0 [ 316.920876] ata1.01: configured for PIO0 [ 316.920895] ata1: EH complete [ 320.116013] eth0: no IPv6 routers present [ 322.420557] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 322.420568] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 322.420570] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 322.420571] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 322.420574] ata1.01: status: { DRDY } [ 322.420600] ata1: soft resetting link [ 322.592875] ata1.00: configured for PIO0 [ 322.608881] ata1.01: configured for PIO0 [ 322.608899] ata1: EH complete [ 328.108540] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 328.108556] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 328.108558] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 328.108559] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 328.108564] ata1.01: status: { DRDY } [ 328.108595] ata1: soft resetting link [ 328.288847] ata1.00: configured for PIO0 [ 328.305232] ata1.01: configured for PIO0 [ 328.305255] ata1: EH complete [ 335.304537] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 335.304552] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 335.304554] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 335.304556] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 335.304560] ata1.00: status: { DRDY } [ 335.304591] ata1: soft resetting link [ 335.476876] ata1.00: configured for PIO0 [ 335.492347] ata1.01: configured for PIO0 [ 335.492367] ata1: EH complete [ 340.992537] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 340.992553] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 340.992555] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 340.992556] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 340.992561] ata1.00: status: { DRDY } [ 340.992592] ata1: soft resetting link [ 341.164851] ata1.00: configured for PIO0 [ 341.165743] ata1.01: configured for PIO0 [ 341.165760] ata1: EH complete [ 346.664539] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 346.664554] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 346.664556] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 346.664558] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 346.664562] ata1.00: status: { DRDY } [ 346.664594] ata1: soft resetting link [ 346.836346] ata1.00: configured for PIO0 [ 346.852344] ata1.01: configured for PIO0 [ 346.852359] ata1: EH complete [ 352.352539] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 352.352554] ata1.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in [ 352.352556] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 352.352558] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 352.352563] ata1.00: status: { DRDY } [ 352.352594] ata1: soft resetting link [ 352.532382] ata1.00: configured for PIO0 [ 352.533610] ata1.01: configured for PIO0 [ 352.533685] ata1: EH complete [ 358.032039] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 358.032054] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 358.032056] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 358.032058] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 358.032063] ata1.01: status: { DRDY } [ 358.032094] ata1: soft resetting link [ 358.204345] ata1.00: configured for PIO0 [ 358.205214] ata1.01: configured for PIO0 [ 358.205232] ata1: EH complete [ 363.704538] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 363.704553] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 363.704555] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 363.704557] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 363.704561] ata1.01: status: { DRDY } [ 363.704592] ata1: soft resetting link [ 363.884345] ata1.00: configured for PIO0 [ 363.892512] ata1.01: configured for PIO0 [ 363.892531] ata1: EH complete [ 369.392040] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 369.392054] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in [ 369.392056] cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 [ 369.392058] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 369.392063] ata1.01: status: { DRDY } [ 369.392094] ata1: soft resetting link [ 369.564344] ata1.00: configured for PIO0 [ 369.580344] ata1.01: configured for PIO0 [ 369.580360] ata1: EH complete