[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe60000 (usable) [ 0.000000] BIOS-e820: 000000007fe60000 - 000000007fe74000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe74000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7780 [ 0.000000] Entering add_active_range(0, 0, 523872) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523872 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523872 [ 0.000000] On node 0 totalpages: 523872 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2300 pages used for memmap [ 0.000000] HighMem zone: 292196 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F76F0 checksum 0 [ 0.000000] ACPI: RSDP 000F76F0, 0014 (r0 TOSCPL) [ 0.000000] ACPI: RSDT 7FE6D62F, 0054 (r1 TOSCPL Capell00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FE73DEE, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: DSDT 7FE6F352, 4A9C (r1 TOSCPL CALISTGA 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 7FE74FC0, 0040 [ 0.000000] ACPI: APIC 7FE73E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7FE73ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7FE73F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 7FE73F3E, 0032 (r1 Intel CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 7FE73F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FE73FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 7FE6ED03, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE6E671, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE6DBF5, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE6DB4F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE6D683, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists. Total pages: 519780 [ 0.000000] Kernel command line: root=UUID=711d580a-f99e-4726-8ffa-9905db840842 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.052 MHz processor. [ 14.419532] Console: colour VGA+ 80x25 [ 14.419791] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 14.420054] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 14.498515] Memory: 2065972k/2095488k available (2015k kernel code, 28184k reserved, 916k data, 364k init, 1177984k highmem) [ 14.498523] virtual kernel memory layout: [ 14.498524] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 14.498525] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 14.498526] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 14.498527] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 14.498528] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 14.498529] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 14.498530] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 14.498532] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 14.498569] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 14.498699] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 14.498703] hpet0: 3 64-bit timers, 14318180 Hz [ 14.579679] Calibrating delay using timer specific routine.. 3994.39 BogoMIPS (lpj=7988782) [ 14.579702] Security Framework v1.0.0 initialized [ 14.579707] SELinux: Disabled at boot. [ 14.579718] Mount-cache hash table entries: 512 [ 14.579833] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 [ 14.579839] monitor/mwait feature present. [ 14.579841] using mwait in idle threads. [ 14.579845] CPU: L1 I cache: 32K, L1 D cache: 32K [ 14.579847] CPU: L2 cache: 4096K [ 14.579849] CPU: Physical Processor ID: 0 [ 14.579851] CPU: Processor Core ID: 0 [ 14.579852] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 [ 14.579860] Compat vDSO mapped to ffffe000. [ 14.579872] Checking 'hlt' instruction... OK. [ 14.595769] SMP alternatives: switching to UP code [ 14.596161] Early unpacking initramfs... done [ 14.873511] ACPI: Core revision 20070126 [ 14.873548] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 14.885448] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 14.885462] SMP alternatives: switching to SMP code [ 14.885531] Booting processor 1/1 eip 3000 [ 14.895950] Initializing CPU#1 [ 14.975452] Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980097) [ 14.975458] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 [ 14.975462] monitor/mwait feature present. [ 14.975465] CPU: L1 I cache: 32K, L1 D cache: 32K [ 14.975466] CPU: L2 cache: 4096K [ 14.975468] CPU: Physical Processor ID: 0 [ 14.975469] CPU: Processor Core ID: 1 [ 14.975471] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 [ 14.976150] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 14.976171] Total of 2 processors activated (7984.43 BogoMIPS). [ 14.976366] ENABLING IO-APIC IRQs [ 14.976562] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 15.123453] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 15.143459] Brought up 2 CPUs [ 15.268877] migration_cost=49 [ 15.268995] Booting paravirtualized kernel on bare hardware [ 15.269077] Time: 18:11:50 Date: 09/22/107 [ 15.269094] NET: Registered protocol family 16 [ 15.269166] EISA bus registered [ 15.269170] ACPI: bus type pci registered [ 15.269277] PCI: BIOS BUG #81[49435000] found [ 15.269365] PCI: Using configuration type 1 [ 15.269367] Setting up standard PCI resources [ 15.273173] ACPI: EC: Look up EC in DSDT [ 15.273870] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 15.282772] ACPI: System BIOS is requesting _OSI(Linux) [ 15.282774] ACPI: Please test with "acpi_osi=!Linux" [ 15.282775] Please send dmidecode to linux-acpi@vger.kernel.org [ 15.283018] ACPI: Interpreter enabled [ 15.283021] ACPI: (supports S0 S3 S4 S5) [ 15.283034] ACPI: Using IOAPIC for interrupt routing [ 15.328085] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 15.328368] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.328380] PCI: Probing PCI hardware (bus 00) [ 15.329057] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 15.329061] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 15.330442] PCI: Transparent bridge - 0000:00:1e.0 [ 15.330581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.330820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 15.330929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 15.331034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 15.331138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 15.331248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 15.336890] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 15.336973] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 15.337053] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 15.337134] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 15.337214] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 15.337294] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 15.337374] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 15.337454] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 15.337553] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.337564] pnp: PnP ACPI init [ 15.337570] ACPI: bus type pnp registered [ 15.359389] pnp: PnP ACPI: found 11 devices [ 15.359391] ACPI: ACPI bus type pnp unregistered [ 15.359394] PnPBIOS: Disabled by ACPI PNP [ 15.359428] PCI: Using ACPI for IRQ routing [ 15.359430] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.359434] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3 [ 15.359524] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3 [ 15.359712] NET: Registered protocol family 8 [ 15.359714] NET: Registered protocol family 20 [ 15.359753] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved [ 15.359755] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved [ 15.359757] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved [ 15.359760] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 15.359763] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 15.359766] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 15.359768] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 15.359775] pnp: 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved [ 15.363242] Time: tsc clocksource has been installed. [ 15.363254] Switched to high resolution mode on CPU 0 [ 15.363332] Switched to high resolution mode on CPU 1 [ 15.390031] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 [ 15.390121] PCI: Bridge: 0000:00:01.0 [ 15.390123] IO window: 2000-2fff [ 15.390127] MEM window: d0000000-d1ffffff [ 15.390130] PREFETCH window: c0000000-cfffffff [ 15.390133] PCI: Bridge: 0000:00:1c.0 [ 15.390134] IO window: disabled. [ 15.390140] MEM window: d2100000-d21fffff [ 15.390144] PREFETCH window: disabled. [ 15.390150] PCI: Bridge: 0000:00:1c.2 [ 15.390152] IO window: 3000-3fff [ 15.390158] MEM window: d2200000-d22fffff [ 15.390163] PREFETCH window: 8c000000-8c0fffff [ 15.390168] PCI: Bridge: 0000:00:1c.3 [ 15.390169] IO window: disabled. [ 15.390175] MEM window: disabled. [ 15.390179] PREFETCH window: disabled. [ 15.390190] PCI: Bus 7, cardbus bridge: 0000:06:04.0 [ 15.390192] IO window: 00004000-000040ff [ 15.390197] IO window: 00004400-000044ff [ 15.390202] PREFETCH window: 88000000-8bffffff [ 15.390207] MEM window: 90000000-93ffffff [ 15.390212] PCI: Bridge: 0000:00:1e.0 [ 15.390215] IO window: 4000-4fff [ 15.390221] MEM window: d2000000-d20fffff [ 15.390225] PREFETCH window: 88000000-8bffffff [ 15.390240] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.390245] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 15.390267] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 15.390272] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 15.390296] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 15.390301] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 15.390323] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 15.390330] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 15.390341] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [ 15.390347] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 15.390363] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.390375] NET: Registered protocol family 2 [ 15.439180] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.439223] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 15.439791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 15.439982] TCP: Hash tables configured (established 131072 bind 65536) [ 15.439984] TCP reno registered [ 15.455261] checking if image is initramfs... it is [ 15.998301] Freeing initrd memory: 7060k freed [ 15.998412] Simple Boot Flag at 0x36 set to 0x1 [ 15.998882] audit: initializing netlink socket (disabled) [ 15.998898] audit(1193076710.232:1): initialized [ 15.998988] highmem bounce pool size: 64 pages [ 16.000670] VFS: Disk quotas dquot_6.5.1 [ 16.000710] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 16.000795] io scheduler noop registered [ 16.000796] io scheduler anticipatory registered [ 16.000798] io scheduler deadline registered [ 16.000810] io scheduler cfq registered (default) [ 16.000910] Boot video device is 0000:01:00.0 [ 16.000990] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 16.001025] assign_interrupt_mode Found MSI capability [ 16.001028] Allocate Port Service[0000:00:01.0:pcie00] [ 16.001103] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 16.001159] assign_interrupt_mode Found MSI capability [ 16.001161] Allocate Port Service[0000:00:1c.0:pcie00] [ 16.001189] Allocate Port Service[0000:00:1c.0:pcie02] [ 16.001282] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 16.001338] assign_interrupt_mode Found MSI capability [ 16.001340] Allocate Port Service[0000:00:1c.2:pcie00] [ 16.001371] Allocate Port Service[0000:00:1c.2:pcie02] [ 16.001464] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 16.001519] assign_interrupt_mode Found MSI capability [ 16.001521] Allocate Port Service[0000:00:1c.3:pcie00] [ 16.001551] Allocate Port Service[0000:00:1c.3:pcie02] [ 16.001704] isapnp: Scanning for PnP cards... [ 16.356214] isapnp: No Plug & Play device found [ 16.374486] Real Time Clock Driver v1.12ac [ 16.374677] hpet_resources: 0xfed00000 is busy [ 16.374703] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.375821] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.375929] input: Macintosh mouse button emulation as /class/input/input0 [ 16.375998] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 16.396398] i8042.c: Detected active multiplexing controller, rev 1.1. [ 16.414172] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.414176] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 16.414178] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 16.414180] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 16.414182] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 16.414326] mice: PS/2 mouse device common for all mice [ 16.416808] EISA: Probing bus 0 at eisa.0 [ 16.416814] Cannot allocate resource for EISA slot 1 [ 16.416817] Cannot allocate resource for EISA slot 2 [ 16.416819] Cannot allocate resource for EISA slot 3 [ 16.416821] Cannot allocate resource for EISA slot 4 [ 16.416838] EISA: Detected 0 cards. [ 16.416973] TCP cubic registered [ 16.416983] NET: Registered protocol family 1 [ 16.417001] Using IPI No-Shortcut mode [ 16.417131] Magic number: 11:204:191 [ 16.417151] hash matches device ttys3 [ 16.417198] hash matches device device:1d [ 16.417380] Freeing unused kernel memory: 364k freed [ 16.446617] input: AT Translated Set 2 keyboard as /class/input/input1 [ 17.592703] AppArmor: AppArmor initialized<5>audit(1193076711.732:2): type=1505 info="AppArmor initialized" pid=1239 [ 17.597527] fuse init (API version 7.8) [ 17.601186] Failure registering capabilities with primary security module. [ 17.637154] ACPI: SSDT 7FE6E38F, 0231 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 17.637330] ACPI: SSDT 7FE6DE54, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 17.637565] Monitor-Mwait will be used to enter C-1 state [ 17.637568] Monitor-Mwait will be used to enter C-2 state [ 17.637570] Monitor-Mwait will be used to enter C-3 state [ 17.637575] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 17.637812] ACPI: SSDT 7FE6E5C0, 00B1 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 17.637984] ACPI: SSDT 7FE6E30A, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 17.638254] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.012000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.016000] Time: hpet clocksource has been installed. [ 3.396000] usbcore: registered new interface driver usbfs [ 3.396000] usbcore: registered new interface driver hub [ 3.396000] usbcore: registered new device driver usb [ 3.396000] USB Universal Host Controller Interface driver v3.0 [ 3.396000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 3.396000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.396000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.396000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.396000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 3.396000] usb usb1: configuration #1 chosen from 1 choice [ 3.396000] hub 1-0:1.0: USB hub found [ 3.396000] hub 1-0:1.0: 2 ports detected [ 3.428000] SCSI subsystem initialized [ 3.432000] libata version 2.21 loaded. [ 3.500000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 3.500000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.500000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.500000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.500000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 3.500000] usb usb2: configuration #1 chosen from 1 choice [ 3.500000] hub 2-0:1.0: USB hub found [ 3.500000] hub 2-0:1.0: 2 ports detected [ 3.604000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.604000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.604000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.604000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.604000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 3.604000] usb usb3: configuration #1 chosen from 1 choice [ 3.604000] hub 3-0:1.0: USB hub found [ 3.604000] hub 3-0:1.0: 2 ports detected [ 3.708000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 3.708000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.708000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.708000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.708000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 3.708000] usb usb4: configuration #1 chosen from 1 choice [ 3.708000] hub 4-0:1.0: USB hub found [ 3.708000] hub 4-0:1.0: 2 ports detected [ 3.812000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 3.812000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.812000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.812000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 3.812000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.812000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.812000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd2504000 [ 3.844000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 3.844000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.844000] usb usb5: configuration #1 chosen from 1 choice [ 3.844000] hub 5-0:1.0: USB hub found [ 3.844000] hub 5-0:1.0: 8 ports detected [ 3.948000] ata_piix 0000:00:1f.2: version 2.11 [ 3.948000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 4.000000] Clocksource tsc unstable (delta = -331421727 ns) [ 4.104000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.104000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.104000] scsi0 : ata_piix [ 4.104000] scsi1 : ata_piix [ 4.104000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 [ 4.104000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 [ 4.268000] ata1.00: ATA-7: ST910021AS, 3.04, max UDMA/133 [ 4.268000] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.284000] ata1.00: configured for UDMA/133 [ 4.608000] usb 5-4: new high speed USB device using ehci_hcd and address 3 [ 4.628000] ata2.00: ATAPI: Slimtype DVDRW SSM-8515S, GSL1, max UDMA/33 [ 4.740000] usb 5-4: configuration #1 chosen from 1 choice [ 4.824000] ata2.00: configured for UDMA/33 [ 4.824000] scsi 0:0:0:0: Direct-Access ATA ST910021AS 3.04 PQ: 0 ANSI: 5 [ 4.824000] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GSL1 PQ: 0 ANSI: 5 [ 4.824000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 4.824000] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 4.880000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fabff800-fabfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.884000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 4.884000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 4.884000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 4.884000] eth0: RTL8168b/8111b at 0xf886e000, 00:16:d4:51:53:54, XID 38000000 IRQ 18 [ 4.892000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 4.892000] sd 0:0:0:0: [sda] Write Protect is off [ 4.892000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.892000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.892000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 4.892000] sd 0:0:0:0: [sda] Write Protect is off [ 4.892000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.892000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.892000] sda: sda1 sda2 sda3 < sda5 > [ 4.996000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.996000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.996000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.016000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.016000] Uniform CD-ROM driver Revision: 3.20 [ 5.016000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.264000] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 5.328000] Attempting manual resume [ 5.328000] swsusp: Resume From Partition 8:5 [ 5.328000] PM: Checking swsusp image. [ 5.328000] PM: Resume from disk failed. [ 5.360000] kjournald starting. Commit interval 5 seconds [ 5.360000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.444000] usb 2-1: configuration #1 chosen from 1 choice [ 5.688000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 5.852000] usb 3-2: configuration #1 chosen from 1 choice [ 6.160000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f6993400595] [ 11.828000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.836000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.136000] Yenta: CardBus bridge found at 0000:06:04.0 [14c0:0020] [ 12.136000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 12.136000] Yenta: Routing CardBus interrupts to PCI [ 12.136000] Yenta TI: socket 0000:06:04.0, mfunc 0x88501212, devctl 0x44 [ 12.228000] ieee80211_crypt: registered algorithm 'NULL' [ 12.228000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 12.228000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 12.292000] iTCO_vendor_support: vendor-support=0 [ 12.292000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 12.304000] Linux agpgart interface v0.102 (c) Dave Jones [ 12.340000] tpm_inf_pnp 00:02: Found TPM with ID IFX0102 [ 12.340000] tpm_inf_pnp 00:02: TPM found: config base 0x4e, data base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 12.372000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 12.372000] Socket status: 30000006 [ 12.372000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 12.372000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 12.372000] cs: IO port probe 0x4000-0x4fff: clean. [ 12.372000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff [ 12.372000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 12.416000] sdhci: Secure Digital Host Controller Interface driver [ 12.416000] sdhci: Copyright(c) Pierre Ossman [ 12.416000] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1) [ 12.416000] PCI: Enabling device 0000:06:04.2 (0000 -> 0002) [ 12.416000] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 12.416000] PCI: Setting latency timer of device 0000:06:04.2 to 64 [ 12.416000] mmc0: SDHCI at 0xd2001c00 irq 17 DMA [ 12.416000] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1) [ 12.416000] PCI: Enabling device 0000:06:04.4 (0000 -> 0002) [ 12.416000] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 17 (level, low) -> IRQ 17 [ 12.416000] mmc1: SDHCI at 0xd2001000 irq 17 PIO [ 12.536000] usbcore: registered new interface driver hiddev [ 12.548000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 12.548000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 12.548000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.548000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 12.548000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 12.552000] input: Logitech USB Mouse as /class/input/input2 [ 12.552000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1 [ 12.552000] usbcore: registered new interface driver usbhid [ 12.552000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 12.576000] nvidia: module license 'NVIDIA' taints kernel. [ 12.876000] cs: IO port probe 0x100-0x3af: clean. [ 12.880000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 12.880000] cs: IO port probe 0x820-0x8ff: clean. [ 12.880000] cs: IO port probe 0xc00-0xcf7: clean. [ 12.884000] cs: IO port probe 0xa00-0xaff: clean. [ 12.892000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.892000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 12.892000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 13.088000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 13.088000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 13.296000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 13.420000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3 [ 13.424000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 13.424000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.456000] intel_rng: FWH not detected [ 14.080000] si3054: cannot initialize. EXT MID = 0000 [ 14.272000] lp: driver loaded but no devices found [ 14.328000] Adding 2980016k swap on /dev/sda5. Priority:-1 extents:1 across:2980016k [ 14.640000] EXT3 FS on sda2, internal journal [ 14.704000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 15.620000] input: Power Button (FF) as /class/input/input4 [ 15.620000] ACPI: Power Button (FF) [PWRF] [ 15.620000] input: Lid Switch as /class/input/input5 [ 15.620000] ACPI: Lid Switch [LID0] [ 15.620000] input: Power Button (CM) as /class/input/input6 [ 15.620000] ACPI: Power Button (CM) [PWRB] [ 15.784000] ACPI: Battery Slot [BAT1] (battery present) [ 15.792000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 15.792000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.804000] No dock devices found. [ 15.856000] ACPI: AC Adapter [ACAD] (on-line) [ 16.904000] ppdev: user-space parallel port driver [ 17.096000] audit(1193091126.872:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5053 profile="/usr/sbin/cupsd" [ 17.160000] apm: BIOS not found. [ 17.228000] r8169: eth0: link down [ 17.500000] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 17.500000] vboxdrv: Successfully done. [ 17.824000] Failure registering capabilities with primary security module. [ 18.028000] Bluetooth: Core ver 2.11 [ 18.028000] NET: Registered protocol family 31 [ 18.028000] Bluetooth: HCI device and connection manager initialized [ 18.028000] Bluetooth: HCI socket layer initialized [ 18.060000] Bluetooth: L2CAP ver 2.8 [ 18.060000] Bluetooth: L2CAP socket layer initialized [ 18.108000] Bluetooth: RFCOMM socket layer initialized [ 18.108000] Bluetooth: RFCOMM TTY layer initialized [ 18.108000] Bluetooth: RFCOMM ver 1.8 [ 48.192000] NET: Registered protocol family 17 [ 51.844000] ieee80211_crypt: registered algorithm 'TKIP' [ 58.448000] NET: Registered protocol family 10 [ 58.448000] lo: Disabled Privacy Extensions [ 58.448000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 69.312000] eth1: no IPv6 routers present [ 89.156000] ACPI: PCI interrupt for device 0000:04:00.0 disabled [ 89.336000] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 91.328000] PM: Preparing system for mem sleep [ 91.328000] Stopping tasks ... done. [ 91.480000] Suspending console(s) [ 91.516000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 91.548000] sd 0:0:0:0: [sda] Stopping disk [ 93.836000] usb_device usbdev4.1: PM: suspend 0->2, parent usb4 already 2 [ 93.836000] usb_endpoint usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2 [ 93.836000] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2 [ 93.836000] usb_endpoint usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2 [ 93.836000] usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 [ 93.836000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 [ 93.836000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 [ 93.836000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 [ 94.348000] ACPI: PCI interrupt for device 0000:06:04.4 disabled [ 94.364000] ACPI: PCI interrupt for device 0000:06:04.2 disabled [ 94.400000] NVRM: RmPowerManagement: 3 [ 94.972000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 94.988000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 95.004000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 95.004000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 95.004000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 95.004000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 95.012000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 95.028000] Disabling non-boot CPUs ... [ 95.144000] CPU 1 is now offline [ 95.144000] SMP alternatives: switching to UP code [ 95.144000] CPU1 is down [ 95.144000] PM: Entering mem sleep [ 95.144000] Back to C! [ 95.144000] PM: Finishing wakeup. [ 95.144000] Enabling non-boot CPUs ... [ 95.156000] SMP alternatives: switching to SMP code [ 95.156000] Booting processor 1/1 eip 3000 [ 95.164000] Initializing CPU#1 [ 95.244000] Calibrating delay using timer specific routine.. 3987.84 BogoMIPS (lpj=7975684) [ 95.244000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 [ 95.244000] monitor/mwait feature present. [ 95.244000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 95.244000] CPU: L2 cache: 4096K [ 95.244000] CPU: Physical Processor ID: 0 [ 95.244000] CPU: Processor Core ID: 1 [ 95.244000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 [ 95.244000] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 95.244000] CPU1 is up [ 95.244000] APIC error on CPU0: 00(40) [ 95.244000] Switched to high resolution mode on CPU 1 [ 95.272000] PM: Writing back config space on device 0000:00:01.0 at offset f (was 140107, writing 1c0107) [ 95.272000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 95.288000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) [ 95.288000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 95.288000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 95.484000] si3054: cannot initialize. EXT MID = 0000 [ 95.492000] PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing 20200) [ 95.492000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 95.492000] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 1fff1, writing 8c018c01) [ 95.492000] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20003030, writing 3030) [ 95.492000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 95.492000] PM: Writing back config space on device 0000:00:1c.3 at offset 6 (was 0, writing 50500) [ 95.492000] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100007, writing 100004) [ 95.492000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 95.492000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 95.492000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 95.492000] usb usb1: root hub lost power or was reset [ 95.492000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 95.492000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 95.492000] usb usb2: root hub lost power or was reset [ 95.492000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 95.492000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 95.492000] usb usb3: root hub lost power or was reset [ 95.492000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 95.492000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 95.492000] usb usb4: root hub lost power or was reset [ 95.508000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 95.508000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 95.508000] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 1fff1, writing 8bf18801) [ 95.508000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20070600, writing 200a0600) [ 95.508000] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100007) [ 95.508000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 95.524000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 95.524000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 95.524000] NVRM: RmPowerManagement: 4 [ 96.296000] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 107) [ 96.296000] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing d2100000) [ 96.296000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 10) [ 96.296000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100000, writing 100002) [ 96.300000] PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10b) [ 96.300000] PM: Writing back config space on device 0000:04:00.0 at offset 6 (was 4, writing d2200004) [ 96.300000] PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 1, writing 3001) [ 96.300000] PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) [ 96.300000] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100003) [ 96.316000] PM: Writing back config space on device 0000:06:00.0 at offset 5 (was 4001, writing ff81) [ 96.316000] PM: Writing back config space on device 0000:06:00.0 at offset 4 (was d2001000, writing fabff800) [ 96.316000] PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 4000) [ 96.316000] PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 2100000, writing 2100017) [ 96.368000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fabff800-fabfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 96.372000] PM: Writing back config space on device 0000:06:04.0 at offset f (was 7400107, writing 5c00107) [ 96.372000] PM: Writing back config space on device 0000:06:04.0 at offset e (was 0, writing 44fc) [ 96.372000] PM: Writing back config space on device 0000:06:04.0 at offset d (was 0, writing 4400) [ 96.372000] PM: Writing back config space on device 0000:06:04.0 at offset c (was 0, writing 40fc) [ 96.376000] PM: Writing back config space on device 0000:06:04.0 at offset b (was 0, writing 4000) [ 96.376000] PM: Writing back config space on device 0000:06:04.0 at offset a (was 0, writing 93fff000) [ 96.376000] PM: Writing back config space on device 0000:06:04.0 at offset 9 (was 0, writing 90000000) [ 96.376000] PM: Writing back config space on device 0000:06:04.0 at offset 8 (was 0, writing 8bfff000) [ 96.376000] PM: Writing back config space on device 0000:06:04.0 at offset 7 (was 0, writing 88000000) [ 96.376000] PM: Writing back config space on device 0000:06:04.0 at offset 6 (was 20070706, writing b00a0706) [ 96.376000] PM: Writing back config space on device 0000:06:04.0 at offset 3 (was 824008, writing 82a820) [ 96.392000] PM: Writing back config space on device 0000:06:04.2 at offset 3 (was 800000, writing 804000) [ 96.392000] PM: Writing back config space on device 0000:06:04.2 at offset 1 (was 2100000, writing 2100006) [ 96.392000] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 96.408000] PM: Writing back config space on device 0000:06:04.4 at offset 4 (was 0, writing d2001000) [ 96.408000] PM: Writing back config space on device 0000:06:04.4 at offset 1 (was 2100000, writing 2100002) [ 96.408000] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 17 (level, low) -> IRQ 17 [ 96.408000] pnp: Failed to activate device 00:02. [ 96.968000] ata2.00: configured for UDMA/33 [ 97.640000] usb_endpoint usbdev5.3_ep00: PM: resume from 0, parent 5-4 still 2 [ 97.640000] usb 5-4:1.0: PM: resume from 2, parent 5-4 still 2 [ 97.640000] usb_endpoint usbdev5.3_ep81: PM: resume from 0, parent 5-4:1.0 still 2 [ 97.640000] usb_endpoint usbdev5.3_ep82: PM: resume from 0, parent 5-4:1.0 still 2 [ 97.640000] usb_endpoint usbdev5.3_ep83: PM: resume from 0, parent 5-4:1.0 still 2 [ 97.640000] usb_device usbdev5.3: PM: resume from 0, parent 5-4 still 2 [ 97.640000] sd 0:0:0:0: [sda] Starting disk [ 97.872000] ata1.00: configured for UDMA/133 [ 97.888000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 97.888000] usb_endpoint usbdev2.3_ep00: PM: resume from 0, parent 2-1 still 2 [ 97.888000] usbhid 2-1:1.0: PM: resume from 2, parent 2-1 still 2 [ 97.888000] usb_endpoint usbdev2.3_ep81: PM: resume from 0, parent 2-1:1.0 still 2 [ 97.888000] usb_device usbdev2.3: PM: resume from 0, parent 2-1 still 2 [ 97.888000] usb_endpoint usbdev3.2_ep00: PM: resume from 0, parent 3-2 still 2 [ 97.888000] usb 3-2:1.0: PM: resume from 2, parent 3-2 still 2 [ 97.888000] usb_endpoint usbdev3.2_ep81: PM: resume from 0, parent 3-2:1.0 still 2 [ 97.888000] usb_endpoint usbdev3.2_ep02: PM: resume from 0, parent 3-2:1.0 still 2 [ 97.888000] usb_device usbdev3.2: PM: resume from 0, parent 3-2 still 2 [ 97.888000] Restarting tasks ... <5>sd 0:0:0:0: [sda] Write Protect is off [ 97.892000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 97.892000] usb 2-1: USB disconnect, address 3 [ 97.900000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 97.932000] done. [ 98.020000] usb 3-2: USB disconnect, address 2 [ 98.188000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 98.188000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 98.188000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 98.188000] eth0: RTL8168b/8111b at 0xf89d8000, 00:16:d4:51:53:54, XID 38000000 IRQ 18 [ 98.208000] r8169: eth0: link down [ 98.208000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 98.212000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 98.212000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 98.224000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 98.224000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 98.224000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 98.224000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 98.224000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 98.332000] usb 5-4: USB disconnect, address 3 [ 98.444000] usb 5-4: new high speed USB device using ehci_hcd and address 6 [ 98.576000] usb 5-4: configuration #1 chosen from 1 choice [ 99.056000] usb 2-1: new low speed USB device using uhci_hcd and address 4 [ 100.812000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 100.860000] usb 2-1: configuration #1 chosen from 1 choice [ 100.876000] input: Logitech USB Mouse as /class/input/input7 [ 100.876000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1 [ 100.964000] input: Power Button (FF) as /class/input/input8 [ 100.964000] ACPI: Power Button (FF) [PWRF] [ 100.964000] input: Lid Switch as /class/input/input9 [ 100.964000] ACPI: Lid Switch [LID0] [ 100.964000] input: Power Button (CM) as /class/input/input10 [ 100.964000] ACPI: Power Button (CM) [PWRB] [ 101.040000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 101.100000] ACPI: AC Adapter [ACAD] (on-line) [ 101.116000] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 101.188000] ACPI: Battery Slot [BAT1] (battery present) [ 101.284000] usb 3-2: configuration #1 chosen from 1 choice [ 115.384000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 125.852000] eth1: no IPv6 routers present [ 138.220000] eth1: no IPv6 routers present [ 138.608000] ACPI: PCI interrupt for device 0000:04:00.0 disabled [ 138.792000] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 140.592000] PM: suspend-to-disk mode set to 'shutdown' [ 140.592000] swsusp: Basic memory bitmaps created [ 140.592000] Stopping tasks ... done. [ 140.772000] Shrinking memory... -done (0 pages freed) [ 140.888000] Freed 0 kbytes in 0.11 seconds (0.00 MB/s) [ 140.888000] Suspending console(s) [ 140.936000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 141.044000] usb_device usbdev4.1: PM: suspend 0->1, parent usb4 already 2 [ 141.044000] usb_endpoint usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2 [ 141.044000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2 [ 141.044000] usb_endpoint usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2 [ 141.044000] usb_device usbdev1.1: PM: suspend 0->1, parent usb1 already 2 [ 141.044000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2 [ 141.044000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2 [ 141.044000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2 [ 141.044000] ACPI: PCI interrupt for device 0000:06:04.4 disabled [ 141.060000] ACPI: PCI interrupt for device 0000:06:04.2 disabled [ 141.096000] NVRM: RmPowerManagement: 3 [ 142.516000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 142.516000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 142.532000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 142.532000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 142.532000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 142.532000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 142.540000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 142.556000] Disabling non-boot CPUs ... [ 142.672000] CPU 1 is now offline [ 142.672000] SMP alternatives: switching to UP code [ 142.672000] CPU1 is down [ 142.672000] PM: snapshotting memory. [ 142.672000] swsusp: critical section: [ 142.672000] swsusp: Need to copy 113805 pages [ 142.672000] swsusp: Normal pages needed: 15090 + 1024 + 40, available pages: 214277 [ 142.672000] PM: Image restored successfully. [ 142.672000] Enabling non-boot CPUs ... [ 142.684000] SMP alternatives: switching to SMP code [ 142.684000] Booting processor 1/1 eip 3000 [ 142.692000] Initializing CPU#1 [ 142.772000] Calibrating delay using timer specific routine.. 3987.85 BogoMIPS (lpj=7975705) [ 142.772000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 [ 142.772000] monitor/mwait feature present. [ 142.772000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 142.772000] CPU: L2 cache: 4096K [ 142.772000] CPU: Physical Processor ID: 0 [ 142.772000] CPU: Processor Core ID: 1 [ 142.772000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 [ 142.772000] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 142.772000] CPU1 is up [ 142.772000] Switched to high resolution mode on CPU 1 [ 142.792000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 142.808000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) [ 142.808000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 142.808000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 143.844000] hda_intel: azx_get_response timeout, switching to polling mode... [ 144.012000] si3054: cannot initialize. EXT MID = 0000 [ 144.020000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 144.020000] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 3030, writing 20003030) [ 144.020000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 144.020000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 144.020000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 144.020000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 144.020000] usb usb1: root hub lost power or was reset [ 144.020000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 144.020000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 144.020000] usb usb2: root hub lost power or was reset [ 144.020000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 144.020000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 144.020000] usb usb3: root hub lost power or was reset [ 144.020000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 144.020000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 144.020000] usb usb4: root hub lost power or was reset [ 144.036000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 144.036000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 144.036000] usb usb5: root hub lost power or was reset [ 144.040000] ehci_hcd 0000:00:1d.7: debug port 1 [ 144.040000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 144.040000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20070600, writing 200a0600) [ 144.040000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 144.040000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b80001, writing 2b80005) [ 144.040000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 144.040000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 144.040000] NVRM: RmPowerManagement: 4 [ 144.228000] ata1.00: configured for UDMA/133 [ 144.228000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 144.228000] sd 0:0:0:0: [sda] Write Protect is off [ 144.228000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 144.228000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 144.768000] ata2.00: configured for UDMA/33 [ 145.852000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100006, writing 100002) [ 145.852000] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100007, writing 100003) [ 145.920000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fabff800-fabfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 145.924000] PM: Writing back config space on device 0000:06:04.0 at offset f (was 7400107, writing 5c00107) [ 145.924000] PM: Writing back config space on device 0000:06:04.0 at offset 3 (was 824008, writing 82a820) [ 145.944000] PM: Writing back config space on device 0000:06:04.2 at offset 3 (was 800000, writing 804000) [ 145.944000] PM: Writing back config space on device 0000:06:04.2 at offset 1 (was 2100000, writing 2100006) [ 145.944000] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 145.960000] PM: Writing back config space on device 0000:06:04.4 at offset 1 (was 2100000, writing 2100002) [ 145.960000] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 17 (level, low) -> IRQ 17 [ 145.960000] pnp: Failed to activate device 00:02. [ 147.204000] sd 0:0:0:0: [sda] Starting disk [ 147.280000] usb_endpoint usbdev5.6_ep00: PM: resume from 0, parent 5-4 still 1 [ 147.280000] usb 5-4:1.0: PM: resume from 1, parent 5-4 still 1 [ 147.280000] usb_endpoint usbdev5.6_ep81: PM: resume from 0, parent 5-4:1.0 still 1 [ 147.280000] usb_endpoint usbdev5.6_ep82: PM: resume from 0, parent 5-4:1.0 still 1 [ 147.280000] usb_endpoint usbdev5.6_ep83: PM: resume from 0, parent 5-4:1.0 still 1 [ 147.280000] usb_device usbdev5.6: PM: resume from 0, parent 5-4 still 1 [ 147.280000] usb_endpoint usbdev2.4_ep00: PM: resume from 0, parent 2-1 still 1 [ 147.280000] usbhid 2-1:1.0: PM: resume from 1, parent 2-1 still 1 [ 147.280000] usb_endpoint usbdev2.4_ep81: PM: resume from 0, parent 2-1:1.0 still 1 [ 147.280000] usb_device usbdev2.4: PM: resume from 0, parent 2-1 still 1 [ 147.280000] usb_endpoint usbdev3.3_ep00: PM: resume from 0, parent 3-2 still 1 [ 147.280000] usb 3-2:1.0: PM: resume from 1, parent 3-2 still 1 [ 147.280000] usb_endpoint usbdev3.3_ep81: PM: resume from 0, parent 3-2:1.0 still 1 [ 147.280000] usb_endpoint usbdev3.3_ep02: PM: resume from 0, parent 3-2:1.0 still 1 [ 147.280000] usb_device usbdev3.3: PM: resume from 0, parent 3-2 still 1 [ 147.284000] Restarting tasks ... <6>usb 2-1: USB disconnect, address 4 [ 147.292000] done. [ 147.292000] swsusp: Basic memory bitmaps freed [ 147.540000] usb 3-2: USB disconnect, address 3 [ 147.732000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 147.732000] PCI: Enabling device 0000:04:00.0 (0000 -> 0003) [ 147.732000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 147.732000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 147.732000] eth0: RTL8168b/8111b at 0xf8876000, 00:16:d4:51:53:54, XID 38000000 IRQ 18 [ 147.752000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 147.752000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 147.768000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 147.768000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 147.768000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 147.768000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 147.768000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 147.852000] usb 5-4: USB disconnect, address 6 [ 148.092000] usb 5-4: new high speed USB device using ehci_hcd and address 9 [ 148.224000] usb 5-4: configuration #1 chosen from 1 choice [ 149.932000] input: Power Button (FF) as /class/input/input11 [ 149.932000] ACPI: Power Button (FF) [PWRF] [ 149.932000] input: Lid Switch as /class/input/input12 [ 149.932000] ACPI: Lid Switch [LID0] [ 149.932000] input: Power Button (CM) as /class/input/input13 [ 149.932000] ACPI: Power Button (CM) [PWRB] [ 150.064000] usb 2-1: new low speed USB device using uhci_hcd and address 5 [ 150.308000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 150.376000] ACPI: AC Adapter [ACAD] (on-line) [ 150.420000] usb 2-1: configuration #1 chosen from 1 choice [ 150.436000] input: Logitech USB Mouse as /class/input/input14 [ 150.436000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1 [ 150.512000] ACPI: Battery Slot [BAT1] (battery present) [ 150.676000] usb 3-2: new full speed USB device using uhci_hcd and address 4 [ 150.848000] usb 3-2: configuration #1 chosen from 1 choice [ 157.716000] r8169: eth0: link down [ 157.720000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 157.820000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 172.164000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 188.880000] eth1: no IPv6 routers present