[ 0.000000] Linux version 2.6.22-14-generic (buildd@vernadsky) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 06:00:47 GMT 2007 (Ubuntu 2.6.22-14.43-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe80000 (usable) [ 0.000000] BIOS-e820: 000000003fe80000 - 000000003fe89000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fe89000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261760) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261760 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261760 [ 0.000000] On node 0 totalpages: 261760 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32131 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6970 checksum 0 [ 0.000000] ACPI: RSDP 000F6970, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3FE80FC1, 0044 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FE88E8A, 0074 (r1 INTEL ALVISO 6040000 LOHR 5F) [ 0.000000] ACPI: DSDT 3FE8183B, 764F (r1 INTEL ALVISO 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FE99FC0, 0040 [ 0.000000] ACPI: APIC 3FE88EFE, 0066 (r1 INTEL ALVISO 6040000 LOHR 5F) [ 0.000000] ACPI: HPET 3FE88F64, 0038 (r1 INTEL ALVISO 6040000 LOHR 5F) [ 0.000000] ACPI: MCFG 3FE88F9C, 003C (r1 INTEL ALVISO 6040000 LOHR 5F) [ 0.000000] ACPI: BOOT 3FE88FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3FE813F6, 0235 (r1 PmRef Cpu0Ist 3000 INTL 20030224) [ 0.000000] ACPI: SSDT 3FE8121E, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030224) [ 0.000000] ACPI: SSDT 3FE81005, 0219 (r1 PmRef CpuPm 3000 INTL 20030224) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 255, address 0xfec20000, GSI 24-279 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 259715 [ 0.000000] Kernel command line: root=UUID=762706b1-4a7e-4c94-9d7d-9f46fc7fb62c ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] mapped IOAPIC to ffffb000 (fec20000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.062 MHz processor. [ 6.447556] Console: colour VGA+ 80x25 [ 6.447865] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 6.448277] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 6.482024] Memory: 1026424k/1047040k available (2015k kernel code, 19924k reserved, 916k data, 364k init, 129536k highmem) [ 6.482034] virtual kernel memory layout: [ 6.482035] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 6.482037] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 6.482038] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 6.482039] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 6.482040] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 6.482042] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 6.482043] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 6.482046] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 6.482082] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 6.562073] Calibrating delay using timer specific routine.. 3460.80 BogoMIPS (lpj=6921617) [ 6.562096] Security Framework v1.0.0 initialized [ 6.562103] SELinux: Disabled at boot. [ 6.562116] Mount-cache hash table entries: 512 [ 6.562234] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 6.562245] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6.562248] CPU: L2 cache: 2048K [ 6.562251] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 [ 6.562259] Compat vDSO mapped to ffffe000. [ 6.562270] Checking 'hlt' instruction... OK. [ 6.578158] SMP alternatives: switching to UP code [ 6.578322] Freeing SMP alternatives: 11k freed [ 6.578570] Early unpacking initramfs... done [ 6.913207] ACPI: Core revision 20070126 [ 6.913284] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 6.917600] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [ 6.917622] Total of 1 processors activated (3460.80 BogoMIPS). [ 6.919046] ENABLING IO-APIC IRQs [ 6.919241] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 7.065937] Brought up 1 CPUs [ 7.066051] Booting paravirtualized kernel on bare hardware [ 7.066107] Time: 18:32:21 Date: 09/15/107 [ 7.066126] NET: Registered protocol family 16 [ 7.066197] EISA bus registered [ 7.066209] ACPI: bus type pci registered [ 7.066533] PCI: PCI BIOS revision 2.10 entry at 0xfd7be, last bus=7 [ 7.066536] PCI: Using configuration type 1 [ 7.066538] Setting up standard PCI resources [ 7.071419] ACPI: EC: Look up EC in DSDT [ 7.072056] ACPI: EC: GPE=0x1d, ports=0x66, 0x62 [ 7.457984] ACPI: Interpreter enabled [ 7.457987] ACPI: (supports S0 S3 S4 S5) [ 7.458002] ACPI: Using IOAPIC for interrupt routing [ 7.462716] ACPI: EC: GPE=0x1d, ports=0x66, 0x62 [ 7.462759] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 7.462769] PCI: Probing PCI hardware (bus 00) [ 7.463260] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 7.463264] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 7.463933] PCI: Transparent bridge - 0000:00:1e.0 [ 7.464031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 7.464344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 7.464473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 7.464598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 7.464737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 7.468958] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 7.469051] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 7.469143] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 7.469234] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 7.469324] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 7.469415] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 7.469506] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 7.469597] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 7.469694] Linux Plug and Play Support v0.97 (c) Adam Belay [ 7.469704] pnp: PnP ACPI init [ 7.469711] ACPI: bus type pnp registered [ 7.472156] pnp: PnP ACPI: found 9 devices [ 7.472158] ACPI: ACPI bus type pnp unregistered [ 7.472162] PnPBIOS: Disabled by ACPI PNP [ 7.472202] PCI: Using ACPI for IRQ routing [ 7.472204] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 7.472209] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 7.472246] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 7.472279] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 7.472312] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 7.472344] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 [ 7.472377] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 [ 7.472410] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 [ 7.472443] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 [ 7.472476] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 [ 7.485325] NET: Registered protocol family 8 [ 7.485327] NET: Registered protocol family 20 [ 7.485375] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 7.485379] pnp: 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved [ 7.485382] pnp: 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved [ 7.485385] pnp: 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved [ 7.485756] Time: tsc clocksource has been installed. [ 7.515647] PCI: Bridge: 0000:00:01.0 [ 7.515649] IO window: 3000-3fff [ 7.515653] MEM window: c8100000-c81fffff [ 7.515656] PREFETCH window: d0000000-d7ffffff [ 7.515659] PCI: Bridge: 0000:00:1c.0 [ 7.515661] IO window: disabled. [ 7.515665] MEM window: disabled. [ 7.515668] PREFETCH window: disabled. [ 7.515672] PCI: Bridge: 0000:00:1c.1 [ 7.515673] IO window: disabled. [ 7.515677] MEM window: disabled. [ 7.515680] PREFETCH window: disabled. [ 7.515684] PCI: Bridge: 0000:00:1c.2 [ 7.515686] IO window: disabled. [ 7.515690] MEM window: disabled. [ 7.515693] PREFETCH window: disabled. [ 7.515699] PCI: Bus 7, cardbus bridge: 0000:06:01.0 [ 7.515701] IO window: 00004000-000040ff [ 7.515705] IO window: 00004400-000044ff [ 7.515710] PREFETCH window: 50000000-53ffffff [ 7.515714] MEM window: 54000000-57ffffff [ 7.515718] PCI: Bridge: 0000:00:1e.0 [ 7.515720] IO window: 4000-4fff [ 7.515725] MEM window: c8200000-c82fffff [ 7.515729] PREFETCH window: 50000000-53ffffff [ 7.515743] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.515748] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 7.515763] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 7.515768] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 7.515782] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 7.515788] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 7.515803] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 7.515808] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 7.515817] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 7.515829] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 7.515842] NET: Registered protocol family 2 [ 7.553758] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 7.553818] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 7.555053] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 7.555631] TCP: Hash tables configured (established 131072 bind 65536) [ 7.555635] TCP reno registered [ 7.565886] checking if image is initramfs... it is [ 8.017583] Switched to high resolution mode on CPU 0 [ 8.222466] Freeing initrd memory: 7059k freed [ 8.222764] Simple Boot Flag at 0x36 set to 0x1 [ 8.223018] audit: initializing netlink socket (disabled) [ 8.223033] audit(1192473141.336:1): initialized [ 8.223104] highmem bounce pool size: 64 pages [ 8.224822] VFS: Disk quotas dquot_6.5.1 [ 8.224869] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.224958] io scheduler noop registered [ 8.224961] io scheduler anticipatory registered [ 8.224963] io scheduler deadline registered [ 8.224977] io scheduler cfq registered (default) [ 8.225059] Boot video device is 0000:01:00.0 [ 8.225136] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 8.225164] assign_interrupt_mode Found MSI capability [ 8.225167] Allocate Port Service[0000:00:01.0:pcie00] [ 8.225230] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 8.225263] assign_interrupt_mode Found MSI capability [ 8.225266] Allocate Port Service[0000:00:1c.0:pcie00] [ 8.225293] Allocate Port Service[0000:00:1c.0:pcie02] [ 8.225367] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 8.225400] assign_interrupt_mode Found MSI capability [ 8.225403] Allocate Port Service[0000:00:1c.1:pcie00] [ 8.225446] Allocate Port Service[0000:00:1c.1:pcie02] [ 8.225513] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 8.225546] assign_interrupt_mode Found MSI capability [ 8.225549] Allocate Port Service[0000:00:1c.2:pcie00] [ 8.225576] Allocate Port Service[0000:00:1c.2:pcie02] [ 8.225702] isapnp: Scanning for PnP cards... [ 8.578767] isapnp: No Plug & Play device found [ 8.601916] Real Time Clock Driver v1.12ac [ 8.602018] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 8.602188] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 8.602651] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 19 [ 8.602659] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 8.603153] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 8.603278] input: Macintosh mouse button emulation as /class/input/input0 [ 8.603346] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 8.606442] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.606447] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.606579] mice: PS/2 mouse device common for all mice [ 8.606676] EISA: Probing bus 0 at eisa.0 [ 8.606684] Cannot allocate resource for EISA slot 1 [ 8.606686] Cannot allocate resource for EISA slot 2 [ 8.606688] Cannot allocate resource for EISA slot 3 [ 8.606691] Cannot allocate resource for EISA slot 4 [ 8.606704] EISA: Detected 0 cards. [ 8.606795] TCP cubic registered [ 8.606810] NET: Registered protocol family 1 [ 8.606833] Using IPI No-Shortcut mode [ 8.607001] Magic number: 11:538:544 [ 8.607294] Freeing unused kernel memory: 364k freed [ 8.685293] input: AT Translated Set 2 keyboard as /class/input/input1 [ 9.803875] AppArmor: AppArmor initialized<5>audit(1192473142.836:2): type=1505 info="AppArmor initialized" pid=1326 [ 9.939241] fuse init (API version 7.8) [ 10.043564] Failure registering capabilities with primary security module. [ 10.149555] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 10.149560] ACPI: Processor [CPU0] (supports 8 throttling states) [ 10.149571] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 10.556432] ACPI: Thermal Zone [THRM] (54 C) [ 14.352005] usbcore: registered new interface driver usbfs [ 14.352027] usbcore: registered new interface driver hub [ 14.352045] usbcore: registered new device driver usb [ 14.352763] USB Universal Host Controller Interface driver v3.0 [ 14.352823] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 14.352833] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.352837] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.352994] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 14.353019] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 14.353121] usb usb1: configuration #1 chosen from 1 choice [ 14.353143] hub 1-0:1.0: USB hub found [ 14.353149] hub 1-0:1.0: 2 ports detected [ 14.454790] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 [ 14.454802] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.454806] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.454827] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.454855] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 14.454948] usb usb2: configuration #1 chosen from 1 choice [ 14.454972] hub 2-0:1.0: USB hub found [ 14.454978] hub 2-0:1.0: 2 ports detected [ 14.556416] SCSI subsystem initialized [ 14.561541] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.561552] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.561556] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.561578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.561605] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 14.561697] usb usb3: configuration #1 chosen from 1 choice [ 14.561721] hub 3-0:1.0: USB hub found [ 14.561726] hub 3-0:1.0: 2 ports detected [ 14.561814] libata version 2.21 loaded. [ 14.662667] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 14.662679] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 14.662683] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 14.662705] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 14.662733] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 14.662820] usb usb4: configuration #1 chosen from 1 choice [ 14.662844] hub 4-0:1.0: USB hub found [ 14.662851] hub 4-0:1.0: 2 ports detected [ 8.056000] Marking TSC unstable due to: possible TSC halt in C2. [ 8.060000] Time: acpi_pm clocksource has been installed. [ 8.120000] ACPI: PCI Interrupt 0000:06:01.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 8.168000] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 8.168000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 8.168000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 8.168000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.168000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 8.168000] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.168000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 8.168000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc8000000 [ 8.172000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8.172000] usb usb5: configuration #1 chosen from 1 choice [ 8.172000] hub 5-0:1.0: USB hub found [ 8.172000] hub 5-0:1.0: 8 ports detected [ 8.176000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[c8217000-c82177ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 8.276000] tg3.c:v3.77 (May 31, 2007) [ 8.276000] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.352000] eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:c0:9f:cf:d5:86 [ 8.352000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 8.352000] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 8.352000] ata_piix 0000:00:1f.1: version 2.11 [ 8.352000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 8.352000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 8.352000] scsi0 : ata_piix [ 8.352000] scsi1 : ata_piix [ 8.352000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118c0 irq 14 [ 8.352000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118c8 irq 15 [ 8.364000] Clocksource tsc unstable (delta = -322270366 ns) [ 8.736000] ata1.00: ATA-6: ST9100822A, 3.01, max UDMA/100 [ 8.736000] ata1.00: 195371568 sectors, multi 16: LBA48 [ 8.736000] ata1.01: ATAPI: MATSHITAUJ-845D, D100, max UDMA/33 [ 8.752000] ata1.00: configured for UDMA/100 [ 8.908000] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 8.924000] ata1.01: configured for UDMA/33 [ 8.924000] ata2: port disabled. ignoring. [ 8.924000] scsi 0:0:0:0: Direct-Access ATA ST9100822A 3.01 PQ: 0 ANSI: 5 [ 8.924000] scsi 0:0:1:0: CD-ROM MATSHITA UJ-845D D100 PQ: 0 ANSI: 5 [ 8.936000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 8.936000] sd 0:0:0:0: [sda] Write Protect is off [ 8.936000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.936000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.936000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 8.936000] sd 0:0:0:0: [sda] Write Protect is off [ 8.936000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.936000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.936000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 8.988000] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.992000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.992000] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 9.000000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy [ 9.000000] Uniform CD-ROM driver Revision: 3.20 [ 9.000000] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 9.080000] usb 2-2: configuration #1 chosen from 1 choice [ 9.100000] usbcore: registered new interface driver hiddev [ 9.112000] input: Logitech Optical USB Mouse as /class/input/input2 [ 9.112000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2 [ 9.112000] usbcore: registered new interface driver usbhid [ 9.112000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 9.376000] Attempting manual resume [ 9.376000] swsusp: Resume From Partition 8:5 [ 9.376000] PM: Checking swsusp image. [ 9.376000] PM: Resume from disk failed. [ 9.412000] kjournald starting. Commit interval 5 seconds [ 9.412000] EXT3-fs: mounted filesystem with ordered data mode. [ 9.448000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000066de0a] [ 17.004000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.008000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.128000] Linux agpgart interface v0.102 (c) Dave Jones [ 18.128000] iTCO_vendor_support: vendor-support=0 [ 18.148000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 18.148000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 18.148000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 18.536000] intel_rng: FWH not detected [ 18.552000] Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066] [ 18.552000] Yenta: Enabling burst memory read transactions [ 18.552000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 18.552000] Yenta: Routing CardBus interrupts to PCI [ 18.552000] Yenta TI: socket 0000:06:01.0, mfunc 0x01c21b22, devctl 0x64 [ 18.580000] ieee80211_crypt: registered algorithm 'NULL' [ 18.592000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 18.592000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 18.708000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 18.708000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 18.728000] irda_init() [ 18.728000] NET: Registered protocol family 23 [ 18.784000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 [ 18.784000] Socket status: 30000006 [ 18.784000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #08 [ 18.784000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 18.784000] cs: IO port probe 0x4000-0x4fff: clean. [ 18.784000] pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff [ 18.784000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 18.792000] ACPI: PCI Interrupt 0000:06:01.3[A] -> GSI 18 (level, low) -> IRQ 18 [ 18.792000] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 18.792000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 19.012000] ipw2200: Radio Frequency Kill Switch is On: [ 19.012000] Kill switch must be turned off for wireless networking to work. [ 19.012000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 19.116000] cs: IO port probe 0x100-0x3af: clean. [ 19.116000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 19.116000] cs: IO port probe 0x820-0x8ff: clean. [ 19.116000] cs: IO port probe 0xc00-0xcf7: clean. [ 19.120000] cs: IO port probe 0xa00-0xaff: clean. [ 19.260000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 [ 19.272000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17 [ 19.272000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 19.292000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 19.296000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 19.296000] nsc-ircc, chip->init [ 19.296000] nsc-ircc, Found chip at base=0x164e [ 19.296000] nsc-ircc, driver loaded (Dag Brattli) [ 19.296000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 19.296000] nsc-ircc, Found chip at base=0x164e [ 19.296000] nsc-ircc, driver loaded (Dag Brattli) [ 19.296000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 19.296000] pnp: Device 00:06 disabled. [ 19.592000] intel8x0_measure_ac97_clock: measured 54008 usecs [ 19.592000] intel8x0: clocking to 48000 [ 19.936000] lp: driver loaded but no devices found [ 19.996000] Adding 1534168k swap on /dev/sda5. Priority:-1 extents:1 across:1534168k [ 20.468000] EXT3 FS on sda1, internal journal [ 21.920000] kjournald starting. Commit interval 5 seconds [ 21.920000] EXT3 FS on sda2, internal journal [ 21.920000] EXT3-fs: mounted filesystem with ordered data mode. [ 22.164000] kjournald starting. Commit interval 5 seconds [ 22.164000] EXT3 FS on sda6, internal journal [ 22.164000] EXT3-fs: mounted filesystem with ordered data mode. [ 23.308000] ACPI: Battery Slot [BAT1] (battery present) [ 23.308000] ACPI: Battery Slot [BAT2] (battery absent) [ 23.428000] ACPI: ACPI Dock Station Driver [ 23.432000] ACPI: \_SB_.PCI0.PATA.PRID.BAY_: found ejectable bay [ 23.432000] ACPI: \_SB_.PCI0.PATA.PRID.BAY_: Adding notify handler [ 23.432000] ACPI: Error installing bay notify handler [ 23.432000] ACPI: Bay [\_SB_.PCI0.PATA.PRID.BAY_] Added [ 23.484000] input: Power Button (FF) as /class/input/input4 [ 23.488000] ACPI: Power Button (FF) [PWRF] [ 23.532000] input: Lid Switch as /class/input/input5 [ 23.532000] ACPI: Lid Switch [LID] [ 23.572000] input: Power Button (CM) as /class/input/input6 [ 23.576000] ACPI: Power Button (CM) [PWRB] [ 23.616000] input: Sleep Button (CM) as /class/input/input7 [ 23.620000] ACPI: Sleep Button (CM) [SLPB] [ 23.628000] ACPI: AC Adapter [ACAD] (on-line) [ 23.696000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 24.812000] ppdev: user-space parallel port driver [ 24.916000] PM: Writing back config space on device 0000:06:08.0 at offset c (was efff0000, writing 0) [ 24.916000] PM: Writing back config space on device 0000:06:08.0 at offset b (was 3ed173b, writing 661025) [ 24.916000] PM: Writing back config space on device 0000:06:08.0 at offset 3 (was 0, writing 2008) [ 24.916000] PM: Writing back config space on device 0000:06:08.0 at offset 2 (was 2000000, writing 2000003) [ 24.916000] PM: Writing back config space on device 0000:06:08.0 at offset 1 (was 2b00000, writing 2b00006) [ 24.916000] PM: Writing back config space on device 0000:06:08.0 at offset 0 (was 3ed173b, writing 169c14e4) [ 25.196000] ttyS1: LSR safety check engaged! [ 25.412000] audit(1192465966.242:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=6245 profile="/usr/sbin/cupsd" [ 25.448000] apm: BIOS not found. [ 26.796000] Failure registering capabilities with primary security module. [ 26.800000] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 26.800000] tg3: eth0: Flow control is on for TX and on for RX. [ 26.948000] Bluetooth: Core ver 2.11 [ 26.948000] NET: Registered protocol family 31 [ 26.948000] Bluetooth: HCI device and connection manager initialized [ 26.948000] Bluetooth: HCI socket layer initialized [ 26.960000] Bluetooth: L2CAP ver 2.8 [ 26.960000] Bluetooth: L2CAP socket layer initialized [ 27.044000] Bluetooth: RFCOMM socket layer initialized [ 27.044000] Bluetooth: RFCOMM TTY layer initialized [ 27.044000] Bluetooth: RFCOMM ver 1.8 [ 28.016000] [drm] Initialized drm 1.1.0 20060810 [ 28.024000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 28.024000] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 32.684000] NET: Registered protocol family 17 [ 32.864000] [drm] Setting GART location based on new memory map [ 32.864000] [drm] Loading R300 Microcode [ 32.864000] [drm] writeback test succeeded in 1 usecs [ 37.940000] NET: Registered protocol family 10 [ 37.940000] lo: Disabled Privacy Extensions [ 37.940000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 45.268000] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0). [ 45.268000] atkbd.c: Use 'setkeycodes e055 ' to make it known. [ 45.276000] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0). [ 45.276000] atkbd.c: Use 'setkeycodes e055 ' to make it known. [ 48.828000] eth0: no IPv6 routers present