[ 0.000000] Linux version 2.6.22-14-server (buildd@king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 03:10:53 UTC 2008 (Ubuntu 2.6.22-14.52-server) [ 0.000000] Command line: root=UUID=8f8db0b6-1606-4528-9f6b-052b2a262410 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098000 (usable) [ 0.000000] BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 152) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7B80 checksum 0 [ 0.000000] ACPI: RSDP 000F7B80, 0014 (r0 SUNW ) [ 0.000000] ACPI: RSDT 3FEE3040, 0038 (r1 SUNW AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FEE30C0, 0074 (r1 SUNW AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FEE3180, 5EC5 (r1 SUNW AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEE0000, 0040 [ 0.000000] ACPI: SSDT 3FEE9180, 00F7 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: SRAT 3FEE92C0, 0090 (r1 AMD HAMMER 1 AMD 1) [ 0.000000] ACPI: MCFG 3FEE93C0, 003C (r1 SUNW AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3FEE90C0, 006C (r1 SUNW AWRDACPI 42302E31 AWRD 0) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0, 152) 0 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-40000000 [ 0.000000] Entering add_active_range(0, 0, 152) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fee0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 152 [ 0.000000] 0: 256 -> 261856 [ 0.000000] On node 0 totalpages: 261752 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1242 pages reserved [ 0.000000] DMA zone: 2694 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3524 pages used for memmap [ 0.000000] DMA32 zone: 254236 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 0000000000098000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 42120 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 256930 [ 0.000000] Kernel command line: root=UUID=8f8db0b6-1606-4528-9f6b-052b2a262410 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 47.854914] time.c: Detected 2211.331 MHz processor. [ 47.856502] Console: colour VGA+ 80x25 [ 47.856517] Checking aperture... [ 47.856519] CPU 0: aperture @ 6a000000 size 32 MB [ 47.856521] Aperture too small (32 MB) [ 47.861421] No AGP bridge found [ 47.871247] Memory: 1021156k/1047424k available (2296k kernel code, 25852k reserved, 1238k data, 308k init) [ 47.871298] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 48.014889] Calibrating delay using timer specific routine.. 4424.69 BogoMIPS (lpj=22123455) [ 48.014920] Security Framework v1.0.0 initialized [ 48.014926] SELinux: Disabled at boot. [ 48.015010] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 48.015709] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 48.016038] Mount-cache hash table entries: 256 [ 48.016161] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 48.016164] CPU: L2 Cache: 1024K (64 bytes/line) [ 48.016166] CPU 0/0 -> Node 0 [ 48.016182] SMP alternatives: switching to UP code [ 48.016432] Early unpacking initramfs... done [ 48.247414] ACPI: Core revision 20070126 [ 48.247472] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 48.351578] Using local APIC timer interrupts. [ 48.396795] result 12564380 [ 48.396797] Detected 12.564 MHz APIC timer. [ 48.404872] Brought up 1 CPUs [ 48.405050] NET: Registered protocol family 16 [ 48.405116] ACPI: bus type pci registered [ 48.405121] PCI: Using configuration type 1 [ 48.406041] ACPI: EC: Look up EC in DSDT [ 48.411631] ACPI: Interpreter enabled [ 48.411633] ACPI: (supports S0 S1 S3 S4 S5) [ 48.411648] ACPI: Using IOAPIC for interrupt routing [ 48.419242] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 48.419249] PCI: Probing PCI hardware (bus 00) [ 48.419599] PCI: Transparent bridge - 0000:00:09.0 [ 48.419856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 48.420163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 48.471994] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 48.472164] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 48.472333] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 48.472503] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 *5 7 9 10 11 12 14 15) [ 48.472672] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 48.472842] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 5 7 9 *10 11 12 14 15) [ 48.473010] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 48.473180] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 5 7 9 10 11 12 14 15) [ 48.473371] ACPI: PCI Interrupt Link [LACI] (IRQs 3 5 *7 9 10 11 12 14 15) [ 48.473541] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 48.473711] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 *5 7 9 10 11 12 14 15) [ 48.473899] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 5 7 9 10 *11 12 14 15) [ 48.474068] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 48.474247] ACPI: PCI Interrupt Link [LSID] (IRQs 3 5 7 9 10 *11 12 14 15) [ 48.474434] ACPI: PCI Interrupt Link [LFID] (IRQs 3 5 7 9 *10 11 12 14 15) [ 48.474614] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 48.474800] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 48.474983] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 48.475163] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 48.475343] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 48.475464] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 48.475649] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 48.475834] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 48.476018] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 48.476203] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 48.476387] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 48.476571] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 48.476755] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 48.476939] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 48.477132] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 48.477325] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 48.477517] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 48.477599] Linux Plug and Play Support v0.97 (c) Adam Belay [ 48.477607] pnp: PnP ACPI init [ 48.477616] ACPI: bus type pnp registered [ 48.481342] pnp: PnP ACPI: found 10 devices [ 48.481344] ACPI: ACPI bus type pnp unregistered [ 48.481385] PCI: Using ACPI for IRQ routing [ 48.481388] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 48.481441] NET: Registered protocol family 8 [ 48.481443] NET: Registered protocol family 20 [ 48.481452] NetLabel: Initializing [ 48.481453] NetLabel: domain hash size = 128 [ 48.481454] NetLabel: protocols = UNLABELED CIPSOv4 [ 48.481464] NetLabel: unlabeled traffic allowed by default [ 48.481542] pnp: 00:01: ioport range 0x1000-0x107f has been reserved [ 48.481544] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 48.481547] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 48.481549] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved [ 48.481552] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 48.481554] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 48.481556] pnp: 00:01: iomem range 0x0-0x0 could not be reserved [ 48.481563] pnp: 00:08: iomem range 0xe0000000-0xefffffff could not be reserved [ 48.481571] pnp: 00:09: iomem range 0xcf800-0xcffff has been reserved [ 48.481573] pnp: 00:09: iomem range 0xf0000-0xf7fff could not be reserved [ 48.481576] pnp: 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 48.481578] pnp: 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 48.481782] PCI: Bridge: 0000:00:09.0 [ 48.481784] IO window: a000-afff [ 48.481787] MEM window: fb000000-fcffffff [ 48.481790] PREFETCH window: fdf00000-fdffffff [ 48.481792] PCI: Bridge: 0000:00:0b.0 [ 48.481794] IO window: 9000-9fff [ 48.481797] MEM window: fde00000-fdefffff [ 48.481799] PREFETCH window: fdd00000-fddfffff [ 48.481802] PCI: Bridge: 0000:00:0c.0 [ 48.481804] IO window: 8000-8fff [ 48.481806] MEM window: fdc00000-fdcfffff [ 48.481809] PREFETCH window: fdb00000-fdbfffff [ 48.481811] PCI: Bridge: 0000:00:0d.0 [ 48.481813] IO window: 7000-7fff [ 48.481816] MEM window: fda00000-fdafffff [ 48.481818] PREFETCH window: fd900000-fd9fffff [ 48.481820] PCI: Bridge: 0000:00:0e.0 [ 48.481822] IO window: 6000-6fff [ 48.481825] MEM window: fd800000-fd8fffff [ 48.481827] PREFETCH window: fd700000-fd7fffff [ 48.481833] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 48.481838] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 48.481843] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 48.481848] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 48.481853] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 48.481863] NET: Registered protocol family 2 [ 48.484823] Time: tsc clocksource has been installed. [ 48.575007] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 48.575327] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 48.577291] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 48.577912] TCP: Hash tables configured (established 131072 bind 65536) [ 48.577915] TCP reno registered [ 48.604929] checking if image is initramfs... it is [ 49.053988] Freeing initrd memory: 6373k freed [ 49.058107] audit: initializing netlink socket (disabled) [ 49.058117] audit(1205347335.170:1): initialized [ 49.059604] VFS: Disk quotas dquot_6.5.1 [ 49.059643] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 49.059713] io scheduler noop registered [ 49.059715] io scheduler anticipatory registered [ 49.059717] io scheduler deadline registered (default) [ 49.059788] io scheduler cfq registered [ 49.085002] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 49.085011] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 49.085016] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 49.085023] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 49.085027] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 49.085033] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 49.085038] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 49.085044] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 49.085050] Boot video device is 0000:01:05.0 [ 49.085160] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 49.085176] assign_interrupt_mode Found MSI capability [ 49.085179] Allocate Port Service[0000:00:0b.0:pcie00] [ 49.085226] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 49.085241] assign_interrupt_mode Found MSI capability [ 49.085243] Allocate Port Service[0000:00:0c.0:pcie00] [ 49.085286] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 49.085302] assign_interrupt_mode Found MSI capability [ 49.085304] Allocate Port Service[0000:00:0d.0:pcie00] [ 49.085344] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 49.085359] assign_interrupt_mode Found MSI capability [ 49.085361] Allocate Port Service[0000:00:0e.0:pcie00] [ 49.103040] Real Time Clock Driver v1.12ac [ 49.103114] Linux agpgart interface v0.102 (c) Dave Jones [ 49.103117] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 49.103244] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 49.103683] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 49.104165] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 49.104313] input: Macintosh mouse button emulation as /class/input/input0 [ 49.104384] PNP: No PS/2 controller found. Probing ports directly. [ 49.107771] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 49.107775] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 49.107913] mice: PS/2 mouse device common for all mice [ 49.108014] TCP cubic registered [ 49.108063] NET: Registered protocol family 1 [ 49.108228] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 49.108234] Freeing unused kernel memory: 308k freed [ 49.213595] Capability LSM initialized [ 49.233047] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 49.914057] usbcore: registered new interface driver usbfs [ 49.914077] usbcore: registered new interface driver hub [ 49.914095] usbcore: registered new device driver usb [ 49.914730] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 49.915065] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 49.915073] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 49.915274] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 49.915280] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 49.915400] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 49.915420] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 49.938269] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 49.938274] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 49.943048] SCSI subsystem initialized [ 49.947362] libata version 2.21 loaded. [ 49.980323] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 49.998184] usb usb1: configuration #1 chosen from 1 choice [ 49.998206] hub 1-0:1.0: USB hub found [ 49.998213] hub 1-0:1.0: 8 ports detected [ 50.116917] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 50.116927] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 50.117200] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 50.117206] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 50.117251] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 50.117276] ehci_hcd 0000:00:02.1: debug port 1 [ 50.117279] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 50.117289] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 [ 50.117294] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 50.117363] usb usb2: configuration #1 chosen from 1 choice [ 50.117386] hub 2-0:1.0: USB hub found [ 50.117392] hub 2-0:1.0: 8 ports detected [ 50.236585] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 50.236603] NFORCE-CK804: chipset revision 242 [ 50.236605] NFORCE-CK804: not 100% native mode: will probe irqs later [ 50.236609] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller [ 50.236616] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA [ 50.236624] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA [ 50.236630] Probing IDE interface ide0... [ 50.894459] usb 1-5: new low speed USB device using ohci_hcd and address 2 [ 51.034508] hda: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive [ 51.145984] usb 1-5: configuration #1 chosen from 1 choice [ 51.169425] usbcore: registered new interface driver hiddev [ 51.176068] input: Composite USB PS2 Converter USB to PS2 Adaptor v1.12 as /class/input/input1 [ 51.176077] input: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor v1.12] on usb-0000:00:02.0-5 [ 51.185105] input: Composite USB PS2 Converter USB to PS2 Adaptor v1.12 as /class/input/input2 [ 51.185121] input: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor v1.12] on usb-0000:00:02.0-5 [ 51.185128] usbcore: registered new interface driver usbhid [ 51.185131] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 51.404905] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 51.407249] Probing IDE interface ide1... [ 52.028338] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 52.028347] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 52.028352] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 52.028360] forcedeth: using HIGHDMA [ 52.037891] hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(66) [ 52.037898] Uniform CD-ROM driver Revision: 3.20 [ 52.564434] eth0: forcedeth.c: subsystem: 0108e:5348 bound to 0000:00:0a.0 [ 52.565056] tg3.c:v3.77 (May 31, 2007) [ 52.565329] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 52.565337] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 52.565345] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 52.565583] sata_nv 0000:00:07.0: version 3.4 [ 52.565954] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 52.565961] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 52.565965] sata_nv 0000:00:07.0: Using ADMA mode [ 52.566089] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 52.567682] scsi0 : sata_nv [ 52.568846] scsi1 : sata_nv [ 52.568910] ata1: SATA max UDMA/133 cmd 0xffffc200005e8480 ctl 0xffffc200005e84a0 bmdma 0x000000000001d400 irq 20 [ 52.568915] ata2: SATA max UDMA/133 cmd 0xffffc200005e8580 ctl 0xffffc200005e85a0 bmdma 0x000000000001d408 irq 20 [ 52.628013] eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:e0:81:5c:cd:c8 [ 52.628018] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] [ 52.628021] eth1: dma_rwctrl[76180000] dma_mask[64-bit] [ 53.064125] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 53.094398] ata1.00: ATA-6: ST380013AS, 3.42, max UDMA/133 [ 53.094400] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 53.154353] ata1.00: configured for UDMA/133 [ 53.494052] ata2: SATA link down (SStatus 0 SControl 300) [ 53.494626] scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.42 PQ: 0 ANSI: 5 [ 53.494632] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 53.495053] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 53.495056] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 53.495060] sata_nv 0000:00:08.0: Using ADMA mode [ 53.495282] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 53.496386] scsi2 : sata_nv [ 53.496909] scsi3 : sata_nv [ 53.496969] ata3: SATA max UDMA/133 cmd 0xffffc200005ea480 ctl 0xffffc200005ea4a0 bmdma 0x000000000001c000 irq 23 [ 53.496973] ata4: SATA max UDMA/133 cmd 0xffffc200005ea580 ctl 0xffffc200005ea5a0 bmdma 0x000000000001c008 irq 23 [ 53.833999] ata3: SATA link down (SStatus 0 SControl 300) [ 54.163947] ata4: SATA link down (SStatus 0 SControl 300) [ 54.175802] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 54.175813] sd 0:0:0:0: [sda] Write Protect is off [ 54.175815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 54.175825] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 54.175863] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 54.175869] sd 0:0:0:0: [sda] Write Protect is off [ 54.175871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 54.175880] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 54.175882] sda: sda1 sda2 sda3 < sda5 sda6 > [ 54.204832] sd 0:0:0:0: [sda] Attached SCSI disk [ 54.210909] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 54.613412] kjournald starting. Commit interval 5 seconds [ 54.613422] EXT3-fs: mounted filesystem with ordered data mode. [ 58.643793] NET: Registered protocol family 10 [ 58.643865] lo: Disabled Privacy Extensions [ 58.808878] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 58.808894] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 58.889227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 58.934227] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 59.203965] input: PC Speaker as /class/input/input3 [ 59.459569] lp: driver loaded but no devices found [ 59.513026] fuse init (API version 7.8) [ 59.684151] Adding 2931820k swap on /dev/disk/by-uuid/3eec5cd5-2514-4c77-9b5c-2b5f77daaf24. Priority:-1 extents:1 across:2931820k [ 59.800716] EXT3 FS on sda2, internal journal [ 59.936257] kjournald starting. Commit interval 5 seconds [ 59.956775] EXT3 FS on sda6, internal journal [ 59.956778] EXT3-fs: mounted filesystem with ordered data mode. [ 62.968953] ata1: timeout waiting for ADMA IDLE, stat=0x440 [ 62.984509] ata1: failed to read log page 10h (errno=-5) [ 62.984582] ata1.00: exception Emask 0x1 SAct 0x7 SErr 0x0 action 0x0 [ 62.984638] ata1.00: (CPB resp_flags 0x11: CMD error) [ 62.984694] ata1.00: cmd 60/00:00:9f:52:e3/02:00:00:00:00/40 tag 0 cdb 0x0 data 262144 in [ 62.984695] res 51/04:08:ff:b8:77/04:00:00:00:00/40 Emask 0x1 (device error) [ 62.984770] ata1.00: cmd 60/08:08:ff:b8:77/00:00:00:00:00/40 tag 1 cdb 0x0 data 4096 in [ 62.984772] res 51/04:08:ff:b8:77/04:00:00:00:00/40 Emask 0x1 (device error) [ 62.984846] ata1.00: cmd 61/08:10:b7:c7:01/00:00:00:00:00/40 tag 2 cdb 0x0 data 4096 out [ 62.984847] res 51/04:08:ff:b8:77/04:00:00:00:00/40 Emask 0x1 (device error) [ 63.012642] ata1.00: model number mismatch 'ST380013AS' != '' [ 63.012645] ata1.00: revalidation failed (errno=-19) [ 63.012699] ata1.00: limiting speed to UDMA/133:PIO3 [ 63.012701] ata1: failed to recover some devices, retrying in 5 secs [ 68.351731] ata1: soft resetting port [ 68.511710] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 68.571994] ata1.00: configured for UDMA/133 [ 68.572000] ata1: EH complete [ 68.572009] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x440 [ 68.572148] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 68.572217] sd 0:0:0:0: [sda] Write Protect is off [ 68.572219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 68.572320] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 69.001628] eth0: no IPv6 routers present [ 98.597020] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x16 next cpb idx 0x0 [ 98.597103] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x0 [ 98.597156] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0 [ 98.597210] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0 [ 98.597262] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0 [ 98.597315] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0 [ 98.597369] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0 [ 98.597421] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0 [ 98.597474] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0 [ 98.597527] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0 [ 98.597579] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0 [ 98.597631] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0 [ 98.597684] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0 [ 98.597737] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0 [ 98.597789] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0 [ 98.597842] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0 [ 98.597895] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0 [ 98.597947] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0 [ 98.598000] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0 [ 98.598053] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0 [ 98.598107] ata1: CPB 19: ctl_flags 0x1f, resp_flags 0x0 [ 98.598160] ata1: CPB 20: ctl_flags 0x1f, resp_flags 0x0 [ 98.598217] ata1: timeout waiting for ADMA IDLE, stat=0x400 [ 98.598223] ata1: timeout waiting for ADMA LEGACY, stat=0x400 [ 98.598231] ata1.00: exception Emask 0x0 SAct 0x1fffff SErr 0x0 action 0x2 frozen [ 98.598305] ata1.00: cmd 61/18:00:e7:7d:51/00:00:00:00:00/40 tag 0 cdb 0x0 data 12288 out [ 98.598306] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 98.598381] ata1.00: cmd 60/08:08:ff:b8:77/00:00:00:00:00/40 tag 1 cdb 0x0 data 4096 in [ 98.598383] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 98.598456] ata1.00: cmd 60/00:10:9f:52:e3/02:00:00:00:00/40 tag 2 cdb 0x0 data 262144 in [ 98.598458] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 98.598532] ata1.00: cmd 60/08:18:37:b8:75/00:00:00:00:00/40 tag 3 cdb 0x0 data 4096 in [ 98.598533] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.598607] ata1.00: cmd 61/08:20:07:7e:51/00:00:00:00:00/40 tag 4 cdb 0x0 data 4096 out [ 98.598608] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.598681] ata1.00: cmd 61/08:28:af:f7:52/00:00:00:00:00/40 tag 5 cdb 0x0 data 4096 out [ 98.598683] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.598755] ata1.00: cmd 61/08:30:e7:f7:76/00:00:00:00:00/40 tag 6 cdb 0x0 data 4096 out [ 98.598757] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.598831] ata1.00: cmd 61/10:38:0f:7e:51/00:00:00:00:00/40 tag 7 cdb 0x0 data 8192 out [ 98.598832] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.598906] ata1.00: cmd 61/30:40:ef:1f:52/00:00:00:00:00/40 tag 8 cdb 0x0 data 24576 out [ 98.598907] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.598980] ata1.00: cmd 61/e8:48:27:20:52/01:00:00:00:00/40 tag 9 cdb 0x0 data 249856 out [ 98.598982] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599057] ata1.00: cmd 61/08:50:0f:22:52/00:00:00:00:00/40 tag 10 cdb 0x0 data 4096 out [ 98.599058] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599132] ata1.00: cmd 61/08:58:87:f6:4e/00:00:00:00:00/40 tag 11 cdb 0x0 data 4096 out [ 98.599134] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599209] ata1.00: cmd 61/08:60:a7:f6:4e/00:00:00:00:00/40 tag 12 cdb 0x0 data 4096 out [ 98.599211] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599284] ata1.00: cmd 61/18:68:17:22:52/00:00:00:00:00/40 tag 13 cdb 0x0 data 12288 out [ 98.599286] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599360] ata1.00: cmd 61/08:70:a7:37:55/00:00:00:00:00/40 tag 14 cdb 0x0 data 4096 out [ 98.599362] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599437] ata1.00: cmd 61/20:78:af:f6:4e/00:00:00:00:00/40 tag 15 cdb 0x0 data 16384 out [ 98.599438] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599512] ata1.00: cmd 61/10:80:ef:a0:4f/00:00:00:00:00/40 tag 16 cdb 0x0 data 8192 out [ 98.599514] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599587] ata1.00: cmd 61/08:88:af:ae:4f/00:00:00:00:00/40 tag 17 cdb 0x0 data 4096 out [ 98.599588] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599661] ata1.00: cmd 61/08:90:2f:22:52/00:00:00:00:00/40 tag 18 cdb 0x0 data 4096 out [ 98.599663] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599736] ata1.00: cmd 61/08:98:27:ae:4f/00:00:00:00:00/40 tag 19 cdb 0x0 data 4096 out [ 98.599738] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.599811] ata1.00: cmd 61/08:a0:e7:ae:4f/00:00:00:00:00/40 tag 20 cdb 0x0 data 4096 out [ 98.599813] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 98.936957] ata1: soft resetting port [ 99.096937] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 99.157212] ata1.00: configured for UDMA/133 [ 99.157228] ata1: EH complete [ 99.157239] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400 [ 99.157410] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 99.157483] sd 0:0:0:0: [sda] Write Protect is off [ 99.157486] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 99.157579] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 129.152246] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x0 next cpb count 0x14 next cpb idx 0x0 [ 129.152325] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x0 [ 129.152379] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0 [ 129.152431] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0 [ 129.152484] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0 [ 129.152537] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0 [ 129.152589] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0 [ 129.152642] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0 [ 129.152695] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0 [ 129.152747] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0 [ 129.152801] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0 [ 129.152854] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0 [ 129.152906] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0 [ 129.152959] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0 [ 129.153012] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0 [ 129.153064] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0 [ 129.153117] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0 [ 129.153170] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0 [ 129.153222] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0 [ 129.153275] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0 [ 129.153328] ata1: CPB 19: ctl_flags 0x1f, resp_flags 0x0 [ 129.153381] ata1: CPB 20: ctl_flags 0x1f, resp_flags 0x0 [ 129.153438] ata1: timeout waiting for ADMA IDLE, stat=0x400 [ 129.153443] ata1: timeout waiting for ADMA LEGACY, stat=0x400 [ 129.153449] ata1.00: exception Emask 0x0 SAct 0x1fffff SErr 0x0 action 0x2 frozen [ 129.153523] ata1.00: cmd 61/08:00:e7:ae:4f/00:00:00:00:00/40 tag 0 cdb 0x0 data 4096 out [ 129.153525] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 129.153598] ata1.00: cmd 61/08:08:27:ae:4f/00:00:00:00:00/40 tag 1 cdb 0x0 data 4096 out [ 129.153600] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 129.153674] ata1.00: cmd 61/08:10:2f:22:52/00:00:00:00:00/40 tag 2 cdb 0x0 data 4096 out [ 129.153675] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 129.153750] ata1.00: cmd 61/08:18:af:ae:4f/00:00:00:00:00/40 tag 3 cdb 0x0 data 4096 out [ 129.153751] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.153825] ata1.00: cmd 61/10:20:ef:a0:4f/00:00:00:00:00/40 tag 4 cdb 0x0 data 8192 out [ 129.153827] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.153901] ata1.00: cmd 61/20:28:af:f6:4e/00:00:00:00:00/40 tag 5 cdb 0x0 data 16384 out [ 129.153903] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.153977] ata1.00: cmd 61/08:30:a7:37:55/00:00:00:00:00/40 tag 6 cdb 0x0 data 4096 out [ 129.153978] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154053] ata1.00: cmd 61/18:38:17:22:52/00:00:00:00:00/40 tag 7 cdb 0x0 data 12288 out [ 129.154054] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154129] ata1.00: cmd 61/08:40:a7:f6:4e/00:00:00:00:00/40 tag 8 cdb 0x0 data 4096 out [ 129.154130] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154203] ata1.00: cmd 61/08:48:87:f6:4e/00:00:00:00:00/40 tag 9 cdb 0x0 data 4096 out [ 129.154205] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154278] ata1.00: cmd 61/08:50:0f:22:52/00:00:00:00:00/40 tag 10 cdb 0x0 data 4096 out [ 129.154280] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154354] ata1.00: cmd 61/e8:58:27:20:52/01:00:00:00:00/40 tag 11 cdb 0x0 data 249856 out [ 129.154355] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154430] ata1.00: cmd 61/30:60:ef:1f:52/00:00:00:00:00/40 tag 12 cdb 0x0 data 24576 out [ 129.154431] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154506] ata1.00: cmd 61/10:68:0f:7e:51/00:00:00:00:00/40 tag 13 cdb 0x0 data 8192 out [ 129.154508] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154581] ata1.00: cmd 61/08:70:e7:f7:76/00:00:00:00:00/40 tag 14 cdb 0x0 data 4096 out [ 129.154583] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154657] ata1.00: cmd 61/08:78:af:f7:52/00:00:00:00:00/40 tag 15 cdb 0x0 data 4096 out [ 129.154658] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154734] ata1.00: cmd 61/08:80:07:7e:51/00:00:00:00:00/40 tag 16 cdb 0x0 data 4096 out [ 129.154735] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154810] ata1.00: cmd 60/08:88:37:b8:75/00:00:00:00:00/40 tag 17 cdb 0x0 data 4096 in [ 129.154811] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154885] ata1.00: cmd 60/00:90:9f:52:e3/02:00:00:00:00/40 tag 18 cdb 0x0 data 262144 in [ 129.154887] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.154961] ata1.00: cmd 60/08:98:ff:b8:77/00:00:00:00:00/40 tag 19 cdb 0x0 data 4096 in [ 129.154963] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.155037] ata1.00: cmd 61/18:a0:e7:7d:51/00:00:00:00:00/40 tag 20 cdb 0x0 data 12288 out [ 129.155038] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 129.492187] ata1: soft resetting port [ 129.652166] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 129.712349] ata1.00: configured for UDMA/133 [ 129.712360] ata1: EH complete [ 129.712367] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400 [ 129.712531] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 129.712597] sd 0:0:0:0: [sda] Write Protect is off [ 129.712600] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 129.712693] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 159.707477] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x14 next cpb idx 0x0 [ 159.707557] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x0 [ 159.707610] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0 [ 159.707662] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0 [ 159.707715] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0 [ 159.707768] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0 [ 159.707820] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0 [ 159.707873] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0 [ 159.707926] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0 [ 159.707978] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0 [ 159.708031] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0 [ 159.708084] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0 [ 159.708136] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0 [ 159.708189] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0 [ 159.708242] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0 [ 159.708294] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0 [ 159.708347] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0 [ 159.709536] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0 [ 159.709589] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0 [ 159.709642] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0 [ 159.709694] ata1: CPB 19: ctl_flags 0x1f, resp_flags 0x0 [ 159.709748] ata1: CPB 20: ctl_flags 0x1f, resp_flags 0x0 [ 159.709804] ata1: timeout waiting for ADMA IDLE, stat=0x1440 [ 159.709810] ata1: timeout waiting for ADMA LEGACY, stat=0x1440 [ 159.709815] ata1.00: NCQ disabled due to excessive errors [ 159.709818] ata1.00: exception Emask 0x0 SAct 0x1fffff SErr 0x0 action 0x2 frozen [ 159.709891] ata1.00: cmd 61/18:00:e7:7d:51/00:00:00:00:00/40 tag 0 cdb 0x0 data 12288 out [ 159.709893] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 159.709968] ata1.00: cmd 60/08:08:ff:b8:77/00:00:00:00:00/40 tag 1 cdb 0x0 data 4096 in [ 159.709969] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 159.710043] ata1.00: cmd 60/00:10:9f:52:e3/02:00:00:00:00/40 tag 2 cdb 0x0 data 262144 in [ 159.710044] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 159.710118] ata1.00: cmd 60/08:18:37:b8:75/00:00:00:00:00/40 tag 3 cdb 0x0 data 4096 in [ 159.710120] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710193] ata1.00: cmd 61/08:20:07:7e:51/00:00:00:00:00/40 tag 4 cdb 0x0 data 4096 out [ 159.710195] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710268] ata1.00: cmd 61/08:28:af:f7:52/00:00:00:00:00/40 tag 5 cdb 0x0 data 4096 out [ 159.710269] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710343] ata1.00: cmd 61/08:30:e7:f7:76/00:00:00:00:00/40 tag 6 cdb 0x0 data 4096 out [ 159.710345] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710419] ata1.00: cmd 61/10:38:0f:7e:51/00:00:00:00:00/40 tag 7 cdb 0x0 data 8192 out [ 159.710420] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710494] ata1.00: cmd 61/30:40:ef:1f:52/00:00:00:00:00/40 tag 8 cdb 0x0 data 24576 out [ 159.710495] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710571] ata1.00: cmd 61/e8:48:27:20:52/01:00:00:00:00/40 tag 9 cdb 0x0 data 249856 out [ 159.710572] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710646] ata1.00: cmd 61/08:50:0f:22:52/00:00:00:00:00/40 tag 10 cdb 0x0 data 4096 out [ 159.710648] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710722] ata1.00: cmd 61/08:58:87:f6:4e/00:00:00:00:00/40 tag 11 cdb 0x0 data 4096 out [ 159.710723] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710797] ata1.00: cmd 61/08:60:a7:f6:4e/00:00:00:00:00/40 tag 12 cdb 0x0 data 4096 out [ 159.710798] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710873] ata1.00: cmd 61/18:68:17:22:52/00:00:00:00:00/40 tag 13 cdb 0x0 data 12288 out [ 159.710874] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.710949] ata1.00: cmd 61/08:70:a7:37:55/00:00:00:00:00/40 tag 14 cdb 0x0 data 4096 out [ 159.710951] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.711025] ata1.00: cmd 61/20:78:af:f6:4e/00:00:00:00:00/40 tag 15 cdb 0x0 data 16384 out [ 159.711026] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.711100] ata1.00: cmd 61/10:80:ef:a0:4f/00:00:00:00:00/40 tag 16 cdb 0x0 data 8192 out [ 159.711101] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.711176] ata1.00: cmd 61/08:88:af:ae:4f/00:00:00:00:00/40 tag 17 cdb 0x0 data 4096 out [ 159.711177] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.711251] ata1.00: cmd 61/08:90:2f:22:52/00:00:00:00:00/40 tag 18 cdb 0x0 data 4096 out [ 159.711253] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.711326] ata1.00: cmd 61/08:98:27:ae:4f/00:00:00:00:00/40 tag 19 cdb 0x0 data 4096 out [ 159.711328] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.711401] ata1.00: cmd 61/08:a0:e7:ae:4f/00:00:00:00:00/40 tag 20 cdb 0x0 data 4096 out [ 159.711403] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 160.047418] ata1: soft resetting port [ 160.207397] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 160.267572] ata1.00: configured for UDMA/133 [ 160.267582] ata1: EH complete [ 160.267590] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400 [ 190.262705] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 next cpb idx 0x0 [ 190.262785] ata1: CPB 0: ctl_flags 0xd, resp_flags 0x0 [ 190.262841] ata1: timeout waiting for ADMA IDLE, stat=0x1040 [ 190.262848] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 190.262906] ata1.00: cmd ca/00:08:e7:ae:4f/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out [ 190.262908] res 40/00:08:ff:b8:77/04:00:00:00:00/40 Emask 0x4 (timeout) [ 190.592650] ata1: soft resetting port [ 190.752629] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 190.812839] ata1.00: configured for UDMA/133 [ 190.812842] ata1: EH complete [ 190.998206] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 191.004596] sd 0:0:0:0: [sda] Write Protect is off [ 191.004599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 191.015537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 191.023254] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 191.141707] sd 0:0:0:0: [sda] Write Protect is off [ 191.141710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 191.141806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 191.299944] vmmon: module license 'unspecified' taints kernel. [ 191.301837] /dev/vmmon[4129]: Module vmmon: registered with major=10 minor=165 [ 191.301853] /dev/vmmon[4129]: Module vmmon: initialized [ 191.498286] /dev/vmnet: open called by PID 4154 (vmnet-bridge) [ 191.498294] /dev/vmnet: hub 0 does not exist, allocating memory. [ 191.498305] /dev/vmnet: port on hub 0 successfully opened [ 191.498715] bridge-eth0: enabling the bridge [ 191.498719] bridge-eth0: up [ 191.498721] bridge-eth0: already up [ 191.498723] bridge-eth0: attached [ 191.552394] /dev/vmnet: open called by PID 4168 (vmnet-natd) [ 191.552404] /dev/vmnet: hub 8 does not exist, allocating memory. [ 191.552415] /dev/vmnet: port on hub 8 successfully opened [ 201.528420] /dev/vmnet: open called by PID 4258 (vmnet-netifup) [ 201.528432] /dev/vmnet: port on hub 8 successfully opened [ 201.534229] /dev/vmnet: open called by PID 4259 (vmnet-netifup) [ 201.534240] /dev/vmnet: hub 1 does not exist, allocating memory. [ 201.534251] /dev/vmnet: port on hub 1 successfully opened [ 201.612692] /dev/vmnet: open called by PID 4280 (vmnet-dhcpd) [ 201.612704] /dev/vmnet: port on hub 8 successfully opened [ 201.613648] /dev/vmnet: open called by PID 4281 (vmnet-dhcpd) [ 201.613656] /dev/vmnet: port on hub 1 successfully opened [ 211.729351] vmnet8: no IPv6 routers present [ 212.399245] vmnet1: no IPv6 routers present [ 5774.415006] /dev/vmmon[4497]: Module vmmon: unloaded [ 5774.441118] bridge-eth0: down [ 5774.441129] bridge-eth0: detached [ 5847.475454] /dev/vmmon[4632]: Module vmmon: registered with major=10 minor=165 [ 5847.475470] /dev/vmmon[4632]: Module vmmon: initialized [ 5847.508313] /dev/vmnet: open called by PID 4661 (vmnet-bridge) [ 5847.508321] /dev/vmnet: hub 0 does not exist, allocating memory. [ 5847.508332] /dev/vmnet: port on hub 0 successfully opened [ 5847.508732] bridge-eth0: enabling the bridge [ 5847.508736] bridge-eth0: up [ 5847.508737] bridge-eth0: already up [ 5847.508740] bridge-eth0: attached [ 5847.513601] /dev/vmnet: open called by PID 4669 (vmnet-natd) [ 5847.513611] /dev/vmnet: hub 8 does not exist, allocating memory. [ 5847.513623] /dev/vmnet: port on hub 8 successfully opened [ 5857.508832] /dev/vmnet: open called by PID 4679 (vmnet-netifup) [ 5857.508844] /dev/vmnet: port on hub 8 successfully opened [ 5857.557214] /dev/vmnet: open called by PID 4690 (vmnet-dhcpd) [ 5857.557225] /dev/vmnet: port on hub 8 successfully opened [ 5868.136436] vmnet8: no IPv6 routers present