/var/log/dmesg.2 [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Oct 9 09:51:52 GMT 2007 (Ubuntu 2.6.22-14.41-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfa0000 (usable) [ 0.000000] BIOS-e820: 000000003bfa0000 - 000000003bfae000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bfae000 - 000000003bff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bff0000 - 000000003c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 63MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 245664) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 245664 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 245664 [ 0.000000] On node 0 totalpages: 245664 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 127 pages used for memmap [ 0.000000] HighMem zone: 16161 pages, LIFO batch:3 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00FB1A0 checksum 0 [ 0.000000] ACPI: RSDP 000FB1A0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3BFA0000, 0044 (r1 _ASUS_ Notebook 4000702 MSFT 97) [ 0.000000] ACPI: FACP 3BFA0200, 0084 (r2 A_M_I_ OEMFACP 4000702 MSFT 97) [ 0.000000] ACPI: DSDT 3BFA05F0, 6988 (r1 A0586 A0586000 0 INTL 20060113) [ 0.000000] ACPI: FACS 3BFAE000, 0040 [ 0.000000] ACPI: APIC 3BFA0390, 0070 (r1 A_M_I_ OEMAPIC 4000702 MSFT 97) [ 0.000000] ACPI: MCFG 3BFA0400, 003C (r1 A_M_I_ OEMMCFG 4000702 MSFT 97) [ 0.000000] ACPI: SLIC 3BFA0440, 0176 (r1 _ASUS_ Notebook 4000702 MSFT 97) [ 0.000000] ACPI: BOOT 3BFA05C0, 0028 (r1 A_M_I_ OEMBOOT 4000702 MSFT 97) [ 0.000000] ACPI: OEMB 3BFAE040, 0060 (r1 A_M_I_ AMI_OEM 4000702 MSFT 97) [ 0.000000] ACPI: HPET 3BFA6F80, 0038 (r1 A_M_I_ OEMHPET0 4000702 MSFT 97) [ 0.000000] ACPI: SSDT 3BFA6FC0, 0115 (r1 A_M_I_ POWERNOW 1 AMD 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:12 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) [ 0.000000] Built 1 zonelists. Total pages: 243745 [ 0.000000] Kernel command line: root=UUID=222b8e3c-9dda-4ac5-90ba-4fec03f27d09 ro single [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2009.204 MHz processor. [ 11.640217] spurious 8259A interrupt: IRQ7. [ 11.643210] Console: colour VGA+ 80x25 [ 11.646181] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 11.646551] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 11.661801] Memory: 962508k/982656k available (2015k kernel code, 19480k reserved, 916k data, 364k init, 65152k highmem) [ 11.661874] virtual kernel memory layout: [ 11.661875] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 11.661876] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 11.661877] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 11.661878] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 11.661880] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 11.661881] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 11.661882] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 11.662274] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 11.662398] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 11.662585] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 11.662776] hpet0: 3 32-bit timers, 25000000 Hz [ 11.743738] Calibrating delay using timer specific routine.. 4021.71 BogoMIPS (lpj=8043425) [ 11.743851] Security Framework v1.0.0 initialized [ 11.743903] SELinux: Disabled at boot. [ 11.743961] Mount-cache hash table entries: 512 [ 11.744105] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d [ 11.744113] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 11.744166] CPU: L2 Cache: 512K (64 bytes/line) [ 11.744216] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d [ 11.744225] Compat vDSO mapped to ffffe000. [ 11.744280] Checking 'hlt' instruction... OK. [ 11.759867] SMP alternatives: switching to UP code [ 11.760065] Freeing SMP alternatives: 11k freed [ 11.760343] Early unpacking initramfs... done [ 12.050329] ACPI: Core revision 20070126 [ 12.050443] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 12.061302] CPU0: AMD Turion(tm) 64 Mobile Technology MK-36 stepping 02 [ 12.061479] Total of 1 processors activated (4021.71 BogoMIPS). [ 12.061938] ENABLING IO-APIC IRQs [ 12.062271] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 12.207160] Brought up 1 CPUs [ 12.207311] Booting paravirtualized kernel on bare hardware [ 12.207434] Time: 20:34:45 Date: 09/09/107 [ 12.207497] NET: Registered protocol family 16 [ 12.207604] EISA bus registered [ 12.207654] ACPI: bus type pci registered [ 12.208282] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 12.208334] PCI: Using configuration type 1 [ 12.208383] Setting up standard PCI resources [ 12.215463] ACPI: EC: Look up EC in DSDT [ 12.216151] ACPI: EC: GPE=0x20, ports=0x66, 0x62 [ 12.246924] ACPI: Interpreter enabled [ 12.246973] ACPI: (supports S0 S1 S3 S4 S5) [ 12.247245] ACPI: Using IOAPIC for interrupt routing [ 12.247462] Error attaching device data [ 12.247514] Error attaching device data [ 12.255613] ACPI: EC: GPE=0x20, ports=0x66, 0x62 [ 12.255773] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 12.255829] PCI: Probing PCI hardware (bus 00) [ 12.256683] PCI: Transparent bridge - 0000:00:10.0 [ 12.256758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 12.256969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 12.257069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 12.272910] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 12.273457] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 12.274000] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 12.274544] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 12.275105] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 12.275650] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *5 [ 12.276159] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11 [ 12.276668] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 12.277212] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *14 [ 12.277720] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 12.278229] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5 [ 12.278738] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 12.279267] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 12.279811] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 12.280357] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 [ 12.280880] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 12.281394] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 12.281908] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 12.282532] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 12.282946] Linux Plug and Play Support v0.97 (c) Adam Belay [ 12.283003] pnp: PnP ACPI init [ 12.283058] ACPI: bus type pnp registered [ 12.286270] pnp: PnP ACPI: found 14 devices [ 12.286320] ACPI: ACPI bus type pnp unregistered [ 12.286371] PnPBIOS: Disabled by ACPI PNP [ 12.286455] PCI: Using ACPI for IRQ routing [ 12.286505] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 12.297444] NET: Registered protocol family 8 [ 12.297493] NET: Registered protocol family 20 [ 12.297589] pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 12.297644] pnp: 00:08: iomem range 0x0-0x0 could not be reserved [ 12.297697] pnp: 00:08: iomem range 0xfee01000-0xfeefffff could not be reserved [ 12.297758] pnp: 00:08: iomem range 0x3c000000-0x3fffffff has been reserved [ 12.297813] pnp: 00:0a: ioport range 0x25c-0x25f has been reserved [ 12.297867] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 12.297929] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 12.297992] pnp: 00:0c: iomem range 0xe0000000-0xe7ffffff has been reserved [ 12.298047] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 12.298100] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 12.298152] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 12.298205] pnp: 00:0d: iomem range 0x100000-0x3bffffff could not be reserved [ 12.299009] Time: tsc clocksource has been installed. [ 12.299067] Switched to high resolution mode on CPU 0 [ 12.328437] PCI: Bridge: 0000:00:02.0 [ 12.328485] IO window: disabled. [ 12.328535] MEM window: bf700000-bf7fffff [ 12.328584] PREFETCH window: disabled. [ 12.328634] PCI: Bridge: 0000:00:03.0 [ 12.328682] IO window: e000-efff [ 12.328732] MEM window: bf800000-bfffffff [ 12.328782] PREFETCH window: ba000000-bcffffff [ 12.328833] PCI: Bridge: 0000:00:10.0 [ 12.328881] IO window: disabled. [ 12.328931] MEM window: disabled. [ 12.328982] PREFETCH window: disabled. [ 12.329039] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 12.329045] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 12.329052] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 12.329062] NET: Registered protocol family 2 [ 12.366922] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 12.367062] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 12.367950] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 12.368268] TCP: Hash tables configured (established 131072 bind 65536) [ 12.368321] TCP reno registered [ 12.378978] checking if image is initramfs... it is [ 12.946420] Freeing initrd memory: 7125k freed [ 12.946542] Simple Boot Flag at 0x78 set to 0x1 [ 12.946829] audit: initializing netlink socket (disabled) [ 12.946889] audit(1191962086.020:1): initialized [ 12.946984] highmem bounce pool size: 64 pages [ 12.948359] VFS: Disk quotas dquot_6.5.1 [ 12.948443] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.948560] io scheduler noop registered [ 12.948610] io scheduler anticipatory registered [ 12.948660] io scheduler deadline registered [ 12.951915] io scheduler cfq registered (default) [ 12.951976] Boot video device is 0000:00:05.0 [ 13.375136] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 13.375156] assign_interrupt_mode Found MSI capability [ 13.375207] Allocate Port Service[0000:00:02.0:pcie00] [ 13.375236] Allocate Port Service[0000:00:02.0:pcie02] [ 13.375279] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 13.375298] assign_interrupt_mode Found MSI capability [ 13.375349] Allocate Port Service[0000:00:03.0:pcie00] [ 13.375370] Allocate Port Service[0000:00:03.0:pcie02] [ 13.375456] isapnp: Scanning for PnP cards... [ 13.728183] isapnp: No Plug & Play device found [ 13.746549] Real Time Clock Driver v1.12ac [ 13.746756] hpet_resources: 0xfed00000 is busy [ 13.746783] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 13.747688] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 13.747903] input: Macintosh mouse button emulation as /class/input/input0 [ 13.748006] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 13.750839] i8042.c: Detected active multiplexing controller, rev 1.1. [ 13.752292] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.752344] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 13.752395] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 13.752445] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 13.752496] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 13.752679] mice: PS/2 mouse device common for all mice [ 13.752891] EISA: Probing bus 0 at eisa.0 [ 13.752964] EISA: Detected 0 cards. [ 13.753084] TCP cubic registered [ 13.753141] NET: Registered protocol family 1 [ 13.753205] Using IPI No-Shortcut mode [ 13.753397] Magic number: 11:850:598 [ 13.753498] hash matches device ptyd2 [ 13.753604] hash matches device PNP0C0F:0a [ 13.753856] Freeing unused kernel memory: 364k freed [ 13.872649] input: AT Translated Set 2 keyboard as /class/input/input1 [ 13.937385] AppArmor: AppArmor initialized<5>audit(1191962087.020:2): type=1505 info="AppArmor initialized" pid=1216 [ 13.945071] fuse init (API version 7.8) [ 13.950037] Failure registering capabilities with primary security module. [ 13.964154] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.964348] ACPI: Processor [P001] (supports 8 throttling states) [ 13.964476] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 14.031958] ACPI: Thermal Zone [TZ00] (45 C) [ 14.682529] usbcore: registered new interface driver usbfs [ 14.682600] usbcore: registered new interface driver hub [ 14.682666] usbcore: registered new device driver usb [ 14.683790] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 [ 14.683868] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 16 [ 14.684007] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 14.684009] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 14.684185] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 14.684270] ehci_hcd 0000:00:0b.1: debug port 1 [ 14.684321] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 14.684331] ehci_hcd 0000:00:0b.1: irq 16, io mem 0xbf6dfc00 [ 14.684388] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.684527] usb usb1: configuration #1 chosen from 1 choice [ 14.684600] hub 1-0:1.0: USB hub found [ 14.684653] hub 1-0:1.0: 8 ports detected [ 14.696166] SCSI subsystem initialized [ 14.700049] libata version 2.21 loaded. [ 14.723139] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 14.738404] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 14.795709] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 14.795765] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 14.796370] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 14.796437] NFORCE-MCP51: chipset revision 161 [ 14.796487] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 14.796543] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 14.796599] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio [ 14.796736] Probing IDE interface ide1... [ 3.172000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.176000] Time: hpet clocksource has been installed. [ 3.252000] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 3.400000] usb 1-5: configuration #1 chosen from 1 choice [ 3.408000] usbcore: registered new interface driver libusual [ 3.412000] Initializing USB Mass Storage driver... [ 3.416000] scsi0 : SCSI emulation for USB Mass Storage devices [ 3.416000] usb-storage: device found at 2 [ 3.416000] usb-storage: waiting for device to settle before scanning [ 3.416000] usbcore: registered new interface driver usb-storage [ 3.416000] USB Mass Storage support registered. [ 3.760000] hdc: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive [ 4.096000] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.100000] sata_nv 0000:00:0e.0: version 3.4 [ 4.100000] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 4.100000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 22 (level, low) -> IRQ 17 [ 4.100000] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 4.100000] scsi1 : sata_nv [ 4.100000] scsi2 : sata_nv [ 4.104000] ata1: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001d482 bmdma 0x0001d000 irq 17 [ 4.104000] ata2: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d082 bmdma 0x0001d008 irq 17 [ 4.112000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 4.112000] Uniform CD-ROM driver Revision: 3.20 [ 4.572000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.580000] ata1.00: ATA-7: ST980811AS, 3.ALC, max UDMA/133 [ 4.580000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.596000] ata1.00: configured for UDMA/133 [ 4.908000] ata2: SATA link down (SStatus 0 SControl 300) [ 4.916000] scsi 1:0:0:0: Direct-Access ATA ST980811AS 3.AL PQ: 0 ANSI: 5 [ 4.916000] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 4.916000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 18 [ 4.916000] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 4.916000] forcedeth: using HIGHDMA [ 4.924000] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 4.924000] sd 1:0:0:0: [sda] Write Protect is off [ 4.924000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.924000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.924000] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 4.924000] sd 1:0:0:0: [sda] Write Protect is off [ 4.924000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.924000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.924000] sda: sda1 sda2 < sda5 > [ 4.964000] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.972000] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.168000] Attempting manual resume [ 5.168000] swsusp: Resume From Partition 8:5 [ 5.168000] PM: Checking swsusp image. [ 5.168000] PM: Resume from disk failed. [ 5.216000] kjournald starting. Commit interval 5 seconds [ 5.216000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.440000] eth0: forcedeth.c: subsystem: 01043:1386 bound to 0000:00:14.0 [ 5.440000] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 5.440000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 20 (level, low) -> IRQ 19 [ 5.440000] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 5.440000] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 5.440000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 5.440000] ohci_hcd 0000:00:0b.0: irq 19, io mem 0xbf6de000 [ 5.496000] usb usb2: configuration #1 chosen from 1 choice [ 5.496000] hub 2-0:1.0: USB hub found [ 5.496000] hub 2-0:1.0: 8 ports detected [ 8.416000] usb-storage: device scan complete [ 8.420000] scsi 0:0:0:0: Direct-Access Generic- xD/SDMMC/MS/Pro 1.00 PQ: 0 ANSI: 0 CCS [ 8.424000] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 8.424000] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 13.396000] NET: Registered protocol family 10 [ 13.396000] lo: Disabled Privacy Extensions [ 13.792000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.796000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.560000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 [ 14.560000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 [ 14.864000] input: PC Speaker as /class/input/input2 [ 15.320000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 [ 15.364000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 15.476000] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23 [ 15.476000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 16 [ 15.476000] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 16.192000] lp: driver loaded but no devices found [ 16.256000] Adding 1317288k swap on /dev/sda5. Priority:-1 extents:1 across:1317288k [ 16.768000] EXT3 FS on sda1, internal journal