[    0.000000] Linux version 2.6.22-14-generic (buildd@vernadsky) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 06:00:47 GMT 2007 (Ubuntu 2.6.22-14.43-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 1151MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f55b0
[    0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   524272
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   524272
[    0.000000] On node 0 totalpages: 524272
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2303 pages used for memmap
[    0.000000]   HighMem zone: 292593 pages, LIFO batch:31
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F6FC0 checksum 0
[    0.000000] ACPI: RSDP 000F6FC0, 0014 (r0 AWARD )
[    0.000000] ACPI: RSDT 7FFF3000, 002C (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 7FFF3040, 0074 (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 7FFF30C0, 3D97 (r1 AWARD  AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 7FFF0000, 0040
[    0.000000] ACPI: APIC 7FFF6E80, 005A (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:12 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[    0.000000] Built 1 zonelists.  Total pages: 520177
[    0.000000] Kernel command line: root=UUID=21f681e7-4fd3-459a-ad64-051c33e99b58 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1599.587 MHz processor.
[   28.365882] Console: colour VGA+ 80x25
[   28.366414] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   28.367269] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   28.447834] Memory: 2067584k/2097088k available (2015k kernel code, 28188k reserved, 916k data, 364k init, 1179584k highmem)
[   28.447847] virtual kernel memory layout:
[   28.447848]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   28.447850]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   28.447851]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   28.447853]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   28.447854]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   28.447856]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   28.447857]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   28.447861] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   28.447904] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   28.527906] Calibrating delay using timer specific routine.. 3200.81 BogoMIPS (lpj=6401631)
[   28.527938] Security Framework v1.0.0 initialized
[   28.527946] SELinux:  Disabled at boot.
[   28.527961] Mount-cache hash table entries: 512
[   28.528102] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[   28.528111] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   28.528114] CPU: L2 Cache: 128K (64 bytes/line)
[   28.528117] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000000 00000000 00000001
[   28.528129] Compat vDSO mapped to ffffe000.
[   28.528141] Checking 'hlt' instruction... OK.
[   28.544039] SMP alternatives: switching to UP code
[   28.544261] Freeing SMP alternatives: 11k freed
[   28.544591] Early unpacking initramfs... done
[   28.910179] ACPI: Core revision 20070126
[   28.910253] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   28.912603] CPU0: AMD Sempron(tm) Processor 3000+ stepping 00
[   28.912622] Total of 1 processors activated (3200.81 BogoMIPS).
[   28.912717] ENABLING IO-APIC IRQs
[   28.912885] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   29.059839] Brought up 1 CPUs
[   29.059952] Booting paravirtualized kernel on bare hardware
[   29.060019] Time:  4:24:49  Date: 09/14/107
[   29.060047] NET: Registered protocol family 16
[   29.060145] EISA bus registered
[   29.060157] ACPI: bus type pci registered
[   29.084969] PCI: PCI BIOS revision 2.10 entry at 0xfb500, last bus=1
[   29.084972] PCI: Using configuration type 1
[   29.084974] Setting up standard PCI resources
[   29.090200] ACPI: EC: Look up EC in DSDT
[   29.094291] ACPI: Interpreter enabled
[   29.094298] ACPI: (supports S0 S3 S4 S5)
[   29.094315] ACPI: Using IOAPIC for interrupt routing
[   29.098791] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   29.098798] PCI: Probing PCI hardware (bus 00)
[   29.099294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   29.122498] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   29.122605] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   29.122705] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   29.122807] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   29.122907] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   29.123009] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[   29.123110] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[   29.123209] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[   29.123308] Linux Plug and Play Support v0.97 (c) Adam Belay
[   29.123323] pnp: PnP ACPI init
[   29.123334] ACPI: bus type pnp registered
[   29.125640] pnp: PnP ACPI: found 10 devices
[   29.125643] ACPI: ACPI bus type pnp unregistered
[   29.125648] PnPBIOS: Disabled by ACPI PNP
[   29.125702] PCI: Using ACPI for IRQ routing
[   29.125706] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   29.130641] NET: Registered protocol family 8
[   29.130644] NET: Registered protocol family 20
[   29.130724] pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[   29.130728] pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[   29.130731] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[   29.130735] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[   29.131789] Time: tsc clocksource has been installed.
[   29.161010] PCI: Bridge: 0000:00:01.0
[   29.161012]   IO window: disabled.
[   29.161017]   MEM window: e8000000-e9ffffff
[   29.161021]   PREFETCH window: d0000000-dfffffff
[   29.161043] NET: Registered protocol family 2
[   29.199822] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   29.199983] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   29.201658] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   29.202239] TCP: Hash tables configured (established 131072 bind 65536)
[   29.202243] TCP reno registered
[   29.211912] checking if image is initramfs... it is
[   29.663683] Switched to high resolution mode on CPU 0
[   29.927182] Freeing initrd memory: 7105k freed
[   29.927586] audit: initializing netlink socket (disabled)
[   29.927600] audit(1192335889.080:1): initialized
[   29.927663] highmem bounce pool size: 64 pages
[   29.929419] VFS: Disk quotas dquot_6.5.1
[   29.929471] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   29.929572] io scheduler noop registered
[   29.929575] io scheduler anticipatory registered
[   29.929577] io scheduler deadline registered
[   29.929593] io scheduler cfq registered (default)
[   29.987528] Boot video device is 0000:01:00.0
[   29.987702] isapnp: Scanning for PnP cards...
[   30.341033] isapnp: No Plug & Play device found
[   30.376367] Real Time Clock Driver v1.12ac
[   30.376444] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   30.376532] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   30.377441] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   30.378157] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   30.378376] input: Macintosh mouse button emulation as /class/input/input0
[   30.378443] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   30.378446] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   30.378739] serio: i8042 KBD port at 0x60,0x64 irq 1
[   30.378745] serio: i8042 AUX port at 0x60,0x64 irq 12
[   30.378891] mice: PS/2 mouse device common for all mice
[   30.378995] EISA: Probing bus 0 at eisa.0
[   30.379004] Cannot allocate resource for EISA slot 1
[   30.379014] Cannot allocate resource for EISA slot 4
[   30.379030] EISA: Detected 0 cards.
[   30.379204] TCP cubic registered
[   30.379222] NET: Registered protocol family 1
[   30.379247] Using IPI No-Shortcut mode
[   30.379467]   Magic number: 11:870:413
[   30.379938] Freeing unused kernel memory: 364k freed
[   30.423458] input: AT Translated Set 2 keyboard as /class/input/input1
[   31.675097] AppArmor: AppArmor initialized<5>audit(1192335891.080:2):  type=1505 info="AppArmor initialized" pid=1184
[   31.685564] fuse init (API version 7.8)
[   31.691980] Failure registering capabilities with primary security module.
[   31.708081] ACPI: Fan [FAN] (on)
[   31.717306] ACPI: Thermal Zone [THRM] (40 C)
[   32.512620] SCSI subsystem initialized
[   32.517684] libata version 2.21 loaded.
[   32.521229] pata_sis 0000:00:02.5: version 0.5.1
[   32.521356] scsi0 : pata_sis
[   32.521411] scsi1 : pata_sis
[   32.521507] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14
[   32.521511] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15
[   32.554998] usbcore: registered new interface driver usbfs
[   32.555023] usbcore: registered new interface driver hub
[   32.555046] usbcore: registered new device driver usb
[   32.555888] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   32.645596] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   32.846996] ata1.00: ATA-6: ST3160023A, 8.01, max UDMA/100
[   32.847001] ata1.00: 312581808 sectors, multi 16: LBA48 
[   32.847007] ata1.01: ATAPI: BENQ    DVD DD DW1640, BSHB, max UDMA/33
[   32.862968] ata1.00: configured for UDMA/100
[   33.035031] ata1.01: configured for UDMA/33
[   33.190674] scsi 0:0:0:0: Direct-Access     ATA      ST3160023A       8.01 PQ: 0 ANSI: 5
[   33.192662] scsi 0:0:1:0: CD-ROM            BENQ     DVD DD DW1640    BSHB PQ: 0 ANSI: 5
[   33.192873] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[   33.192886] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   33.193050] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   33.193072] ohci_hcd 0000:00:03.0: irq 16, io mem 0xea025000
[   33.214235] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   33.214281] sd 0:0:0:0: [sda] Write Protect is off
[   33.214284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.214301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.214366] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   33.214375] sd 0:0:0:0: [sda] Write Protect is off
[   33.214377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.214390] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.214394]  sda: sda1 sda2 < sda5 >
[   33.239944] sd 0:0:0:0: [sda] Attached SCSI disk
[   33.245433] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   33.245623] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   33.248669] usb usb1: configuration #1 chosen from 1 choice
[   33.248699] hub 1-0:1.0: USB hub found
[   33.248710] hub 1-0:1.0: 3 ports detected
[   33.283524] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[   33.283531] Uniform CD-ROM driver Revision: 3.20
[   33.283855] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   33.350589] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17
[   33.350605] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   33.350629] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   33.350646] ohci_hcd 0000:00:03.1: irq 17, io mem 0xea026000
[   33.408631] usb usb2: configuration #1 chosen from 1 choice
[   33.408660] hub 2-0:1.0: USB hub found
[   33.408672] hub 2-0:1.0: 3 ports detected
[   33.510519] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18
[   33.510534] ohci_hcd 0000:00:03.2: OHCI Host Controller
[   33.510564] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[   33.510580] ohci_hcd 0000:00:03.2: irq 18, io mem 0xea022000
[   33.568508] usb usb3: configuration #1 chosen from 1 choice
[   33.568538] hub 3-0:1.0: USB hub found
[   33.568549] hub 3-0:1.0: 2 ports detected
[   33.654372] usb 1-2: new low speed USB device using ohci_hcd and address 2
[   33.670603] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
[   33.670617] ehci_hcd 0000:00:03.3: EHCI Host Controller
[   33.670652] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[   33.670684] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[   33.670695] ehci_hcd 0000:00:03.3: irq 19, io mem 0xea023000
[   33.670703] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   33.670782] usb usb4: configuration #1 chosen from 1 choice
[   33.670808] hub 4-0:1.0: USB hub found
[   33.670817] hub 4-0:1.0: 8 ports detected
[   33.774562] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[   33.774568] 8139cp 0000:00:0d.0: Try the "8139too" driver instead.
[   33.776960] 8139too Fast Ethernet driver 0.9.28
[   33.777008] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 20
[   33.777286] eth0: RealTek RTL8139 at 0xf883c000, 00:11:5b:f2:20:65, IRQ 20
[   33.777289] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   33.778346] sata_sis 0000:00:05.0: version 0.8
[   33.778366] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 21
[   33.778371] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[   33.778457] scsi2 : sata_sis
[   33.778510] scsi3 : sata_sis
[   33.778542] ata3: SATA max UDMA/133 cmd 0x0001e300 ctl 0x0001e402 bmdma 0x0001e700 irq 21
[   33.778548] ata4: SATA max UDMA/133 cmd 0x0001e500 ctl 0x0001e602 bmdma 0x0001e708 irq 21
[   34.246206] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   34.300188] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[   34.300192] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   34.366146] usb 4-2: new high speed USB device using ehci_hcd and address 2
[   34.366801] ata3.00: configured for UDMA/133
[   34.499671] usb 4-2: configuration #1 chosen from 1 choice
[   34.678052] ata4: SATA link down (SStatus 0 SControl 300)
[   34.688734] scsi 2:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[   34.689214] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[   34.689226] sd 2:0:0:0: [sdb] Write Protect is off
[   34.689229] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   34.689242] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.689291] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[   34.689299] sd 2:0:0:0: [sdb] Write Protect is off
[   34.689302] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   34.689314] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.689317]  sdb: sdb1 sdb2 sdb3
[   34.725541] sd 2:0:0:0: [sdb] Attached SCSI disk
[   34.725852] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   34.870083] usbcore: registered new interface driver libusual
[   34.876454] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   34.876460] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   34.878473] Initializing USB Mass Storage driver...
[   35.003786] Attempting manual resume
[   35.003790] swsusp: Resume From Partition 8:19
[   35.003793] PM: Checking swsusp image.
[   35.003999] PM: Resume from disk failed.
[   35.056237] kjournald starting.  Commit interval 5 seconds
[   35.056251] EXT3-fs: mounted filesystem with ordered data mode.
[   35.173893] usb 3-1: new low speed USB device using ohci_hcd and address 2
[   35.385656] usb 3-1: configuration #1 chosen from 1 choice
[   35.388724] scsi4 : SCSI emulation for USB Mass Storage devices
[   35.388766] usb-storage: device found at 2
[   35.388768] usb-storage: waiting for device to settle before scanning
[   35.388785] usbcore: registered new interface driver usb-storage
[   35.388788] USB Mass Storage support registered.
[   35.689730] usb 1-2: new low speed USB device using ohci_hcd and address 3
[   35.902631] usb 1-2: configuration #1 chosen from 1 choice
[   40.287293] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   40.384668] usb-storage: device scan complete
[   40.386199] scsi 4:0:0:0: Direct-Access     ST316002 3A               0811 PQ: 0 ANSI: 0
[   40.392351] sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
[   40.395173] sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
[   40.395179] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[   40.398483] sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
[   40.400302] sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
[   40.400308] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[   40.400315]  sdc: sdc1 sdc2
[   40.406411] sd 4:0:0:0: [sdc] Attached SCSI disk
[   40.406457] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   41.043473] NET: Registered protocol family 10
[   41.043572] lo: Disabled Privacy Extensions
[   42.185733] Linux agpgart interface v0.102 (c) Dave Jones
[   42.211947] agpgart: Detected AGP bridge 0
[   42.216888] agpgart: AGP aperture is 128M @ 0xe0000000
[   42.397214] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   42.745098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   43.650406] input: PC Speaker as /class/input/input2
[   43.868665] parport_pc 00:08: reported by Plug and Play ACPI
[   43.868733] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   43.926930] usbcore: registered new interface driver hiddev
[   43.933947] input: USB Mouse               as /class/input/input3
[   43.934012] input: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:03.2-1
[   43.934036] usbcore: registered new interface driver usbhid
[   43.934040] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   44.152990] input: Wacom Graphire as /class/input/input4
[   44.157788] usbcore: registered new interface driver wacom
[   44.157801] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/tablet/wacom_sys.c: v1.46:USB Wacom Graphire and Wacom Intuos tablet driver
[   44.178200] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 21
[   44.260221] nvidia: module license 'NVIDIA' taints kernel.
[   44.731066] ieee80211_init: failed to initialize WME (err=-17)
[   44.743881] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[   44.743927] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[   44.743966] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[   44.744024] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[   44.744513] wmaster0: Selected rate control algorithm 'simple'
[   44.818780] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 20
[   44.863862] ADDRCONF(NETDEV_UP): ra0: link is not ready
[   45.138743] intel8x0_measure_ac97_clock: measured 54898 usecs
[   45.138748] intel8x0: clocking to 48000
[   45.140009] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22
[   45.140346] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9639  Mon Apr 16 20:20:06 PDT 2007
[   45.638690] ra0: Initial auth_alg=0
[   45.638696] ra0: authenticate with AP 00:13:46:1e:82:22
[   45.640059] ra0: RX authentication from 00:13:46:1e:82:22 (alg=0 transaction=2 status=0)
[   45.640062] ra0: authenticated
[   45.640065] ra0: associate with AP 00:13:46:1e:82:22
[   45.642441] ra0: RX AssocResp from 00:13:46:1e:82:22 (capab=0x31 status=0 aid=8)
[   45.642444] ra0: associated
[   45.643507] ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[   45.676522] ra0: CTS protection enabled (BSSID=00:13:46:1e:82:22)
[   46.012264] ra0: duplicate address detected!
[   46.013320] ra0: duplicate address detected!
[   46.019205] lp0: using parport0 (interrupt-driven).
[   46.040117] NET: Registered protocol family 17
[   46.082533] Adding 497972k swap on /dev/sda5.  Priority:-1 extents:1 across:497972k
[   46.083181] Adding 1028152k swap on /dev/sdb3.  Priority:-2 extents:1 across:1028152k
[   46.405122] EXT3 FS on sdb1, internal journal
[   47.008577] kjournald starting.  Commit interval 5 seconds
[   47.008906] EXT3 FS on sdb2, internal journal
[   47.008912] EXT3-fs: mounted filesystem with ordered data mode.
[   47.018559] kjournald starting.  Commit interval 5 seconds
[   47.026579] EXT3 FS on sda1, internal journal
[   47.026585] EXT3-fs: mounted filesystem with ordered data mode.
[   48.202855] No dock devices found.
[   48.312917] input: Power Button (FF) as /class/input/input5
[   48.318492] ACPI: Power Button (FF) [PWRF]
[   48.362834] input: Power Button (CM) as /class/input/input6
[   48.368382] ACPI: Power Button (CM) [PWRB]
[   48.412709] input: Sleep Button (CM) as /class/input/input7
[   48.418195] ACPI: Sleep Button (CM) [FUTS]
[   48.788461] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (version 2.00.00)
[   48.788498] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
[   48.788501] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
[   20.244000] Marking TSC unstable due to: cpufreq changes.
[   20.248000] Time: acpi_pm clocksource has been installed.
[   22.960000] agpgart: Found an AGP 3.1 compliant device at 0000:00:00.0.
[   22.960000] agpgart: Device is in legacy mode, falling back to 2.x
[   22.960000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[   22.960000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[   23.144000] eth0: no IPv6 routers present
[   23.664000] Clocksource tsc unstable (delta = 69794385 ns)
[   23.760000] ppdev: user-space parallel port driver
[   24.108000] audit(1192335912.420:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4970 profile="/usr/sbin/cupsd"
[   24.172000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   24.172000] apm: overridden by ACPI.
[   24.996000] Failure registering capabilities with primary security module.
[   25.184000] Bluetooth: Core ver 2.11
[   25.184000] NET: Registered protocol family 31
[   25.184000] Bluetooth: HCI device and connection manager initialized
[   25.184000] Bluetooth: HCI socket layer initialized
[   25.196000] Bluetooth: L2CAP ver 2.8
[   25.196000] Bluetooth: L2CAP socket layer initialized
[   25.260000] Bluetooth: RFCOMM socket layer initialized
[   25.264000] Bluetooth: RFCOMM TTY layer initialized
[   25.264000] Bluetooth: RFCOMM ver 1.8
[  553.704000] ra0: CTS protection disabled (BSSID=00:13:46:1e:82:22)
[  615.252000] ra0: CTS protection enabled (BSSID=00:13:46:1e:82:22)
[ 2338.404000] ra0: No ProbeResp from current AP 00:13:46:1e:82:22 - assume out of range
[ 2370.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2402.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2434.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2466.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2498.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2530.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2562.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2594.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2626.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2658.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2690.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2722.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2754.404000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2784.544000] ra0: RX deauthentication from 00:13:46:1e:82:22 (reason=2)
[ 2784.544000] ra0: deauthenticated
[ 2785.544000] ra0: authenticate with AP 00:13:46:1e:82:22
[ 2785.544000] ra0: RX authentication from 00:13:46:1e:82:22 (alg=0 transaction=2 status=0)
[ 2785.544000] ra0: authenticated
[ 2785.544000] ra0: associate with AP 00:13:46:1e:82:22
[ 2785.544000] ra0: RX ReassocResp from 00:13:46:1e:82:22 (capab=0x31 status=0 aid=8)
[ 2785.544000] ra0: associated
[ 2863.544000] ra0: No ProbeResp from current AP 00:13:46:1e:82:22 - assume out of range
[ 2895.544000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2927.544000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2959.544000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 2991.544000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3023.544000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3055.544000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3085.744000] ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 3087.336000] ra0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 3088.556000] ra0: Initial auth_alg=0
[ 3088.556000] ra0: authenticate with AP 00:13:46:1e:82:22
[ 3088.556000] ra0: RX authentication from 00:13:46:1e:82:22 (alg=0 transaction=2 status=0)
[ 3088.556000] ra0: authenticated
[ 3088.556000] ra0: associate with AP 00:13:46:1e:82:22
[ 3088.556000] ra0: RX AssocResp from 00:13:46:1e:82:22 (capab=0x31 status=0 aid=8)
[ 3088.556000] ra0: associated
[ 3088.560000] ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 3088.776000] ra0: duplicate address detected!
[ 3088.776000] ra0: duplicate address detected!
[ 3556.536000] ra0: No ProbeResp from current AP 00:13:46:1e:82:22 - assume out of range
[ 3588.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3620.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3652.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3684.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3716.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3748.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3780.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3812.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3844.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3876.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3908.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3940.536000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 3959.124000] ra0: RX deauthentication from 00:13:46:1e:82:22 (reason=2)
[ 3959.124000] ra0: deauthenticated
[ 3960.124000] ra0: authenticate with AP 00:13:46:1e:82:22
[ 3960.128000] ra0: RX authentication from 00:13:46:1e:82:22 (alg=0 transaction=2 status=0)
[ 3960.128000] ra0: authenticated
[ 3960.128000] ra0: associate with AP 00:13:46:1e:82:22
[ 3960.132000] ra0: RX ReassocResp from 00:13:46:1e:82:22 (capab=0x31 status=0 aid=8)
[ 3960.132000] ra0: associated
[ 5318.132000] ra0: No ProbeResp from current AP 00:13:46:1e:82:22 - assume out of range
[ 5350.132000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 5382.132000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 5414.132000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 5446.132000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 5478.132000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 5510.132000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 5542.132000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 5547.188000] ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 5548.716000] ra0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 5549.412000] ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 5550.972000] ra0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 5576.748000] ra0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 5667.204000] ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 5668.744000] ra0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 5670.040000] ra0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 5670.248000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 5670.828000] ra0: Initial auth_alg=0
[ 5670.828000] ra0: authenticate with AP 00:13:46:1e:82:22
[ 5670.828000] ra0: RX authentication from 00:13:46:1e:82:22 (alg=0 transaction=2 status=0)
[ 5670.828000] ra0: authenticated
[ 5670.828000] ra0: associate with AP 00:13:46:1e:82:22
[ 5670.832000] ra0: RX AssocResp from 00:13:46:1e:82:22 (capab=0x31 status=0 aid=8)
[ 5670.832000] ra0: associated
[ 5670.832000] ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 5671.632000] ra0: duplicate address detected!
[ 5671.632000] ra0: duplicate address detected!
[ 5680.888000] eth0: no IPv6 routers present
[ 6414.116000] ra0: No ProbeResp from current AP 00:13:46:1e:82:22 - assume out of range
[ 6446.116000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 6478.116000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 6510.116000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 6542.116000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 6574.116000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 6606.116000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 6638.116000] ra0: No STA entry for own AP 00:13:46:1e:82:22
[ 6644.212000] ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 6645.052000] ra0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 6647.004000] ra0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 6648.360000] ra0: Initial auth_alg=0
[ 6648.360000] ra0: authenticate with AP 00:13:46:1e:82:22
[ 6648.360000] ra0: RX authentication from 00:13:46:1e:82:22 (alg=0 transaction=2 status=0)
[ 6648.360000] ra0: authenticated
[ 6648.360000] ra0: associate with AP 00:13:46:1e:82:22
[ 6648.364000] ra0: RX AssocResp from 00:13:46:1e:82:22 (capab=0x31 status=0 aid=8)
[ 6648.364000] ra0: associated
[ 6648.364000] ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 6648.416000] ra0: duplicate address detected!
[ 6648.420000] ra0: duplicate address detected!