root@skynet:/tmp/tmp# dmesg [ 0.000000] Linux version 2.6.22-11-generic (buildd@rothera) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Fri Sep 7 05:07:05 GMT 2007 (Ubuntu 2.6.22-11.32-generic) [ 0.000000] BIOS-provided physical RAM map: - Hide quoted text - [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000 ] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4d60 [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000 ] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F67D0, 0014 (r0 VIAK8M) [ 0.000000] ACPI: RSDT 3FFF3040, 002C (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF3180, 5078 (r1 VIAK8M AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF8240, 005A (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:12 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=2dc781c3-fb20-41d6-a85b-71f2192a6eb6 ro vga=ask [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000 ] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000 ] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2000.022 MHz processor. [ 34.196384] Console: colour VGA+ 40x25 [ 34.199682] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 34.200188] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 34.222033] Memory: 1028136k/1048512k available (2016k kernel code, 19608k reserved, 918k data, 364k init, 131008k highmem) [ 34.222125 ] virtual kernel memory layout: [ 34.222126] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 34.222127] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 34.222129] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 34.222130] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 34.222131] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 34.222132] .data : 0xc02f8366 - 0xc03ddea4 ( 918 kB) [ 34.222133 ] .text : 0xc0100000 - 0xc02f8366 (2016 kB) [ 34.222635] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 34.222789] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 34.302735] Calibrating delay using timer specific routine.. 4004.63 BogoMIPS (lpj=8009262) [ 34.302881] Security Framework v1.0.0 initialized [ 34.302951] SELinux: Disabled at boot. [ 34.303025] Mount-cache hash table entries: 512 [ 34.303218] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 [ 34.303226] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 34.303293] CPU: L2 Cache: 512K (64 bytes/line) [ 34.303357] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 [ 34.303368] Compat vDSO mapped to ffffe000. [ 34.303441] Checking 'hlt' instruction... OK. [ 34.318894] SMP alternatives: switching to UP code [ 34.319168] Freeing SMP alternatives: 11k freed [ 34.319499] Early unpacking initramfs... done [ 34.599267] ACPI: Core revision 20070126 [ 34.599387 ] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 34.602044] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [ 34.602241] Total of 1 processors activated (4004.63 BogoMIPS). [ 34.602805] ENABLING IO-APIC IRQs [ 34.603180] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 34.749915] Brought up 1 CPUs [ 34.750092] Booting paravirtualized kernel on bare hardware [ 34.750242] Time: 16:20:58 Date: 08/15/107 [ 34.750323] NET: Registered protocol family 16 [ 34.750457] EISA bus registered [ 34.750528] ACPI: bus type pci registered [ 34.751655] PCI: PCI BIOS revision 2.10 entry at 0xfbac0, last bus=1 [ 34.751720] PCI: Using configuration type 1 [ 34.751782] Setting up standard PCI resources [ 34.755270] ACPI: EC: Look up EC in DSDT [ 34.759809] ACPI: Interpreter enabled [ 34.759872] ACPI: (supports S0 S1 S4 S5) [ 34.760169] ACPI: Using IOAPIC for interrupt routing [ 34.765882] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 34.765949] PCI: Probing PCI hardware (bus 00) [ 34.766737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 34.817539] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 34.818149] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 34.818759] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12) [ 34.819356] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 34.820046] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 34.820732] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 34.821417] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 34.822092] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 34.822787] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 34.823105] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 34.823423] ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled. [ 34.823807] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [ 34.824067] Linux Plug and Play Support v0.97 (c) Adam Belay [ 34.824137] pnp: PnP ACPI init [ 34.824200] ACPI: bus type pnp registered [ 34.827632] pnp: PnP ACPI: found 12 devices [ 34.827695] ACPI: ACPI bus type pnp unregistered [ 34.827759 ] PnPBIOS: Disabled by ACPI PNP [ 34.827860] PCI: Using ACPI for IRQ routing [ 34.827923] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 34.852997] NET: Registered protocol family 8 [ 34.853060] NET: Registered protocol family 20 [ 34.853169] pnp: 00:00: iomem range 0xcee00-0xcffff has been reserved [ 34.853236] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 34.853302 ] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 34.853369] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 34.853438] pnp: 00:02: ioport range 0x4000-0x407f has been reserved [ 34.853504] pnp: 00:02: ioport range 0x5000-0x500f has been reserved [ 34.853686] Time: tsc clocksource has been installed. [ 34.883811] PCI: Bridge: 0000:00:01.0 [ 34.883867] IO window: disabled. [ 34.883925] MEM window: f0000000-f2ffffff [ 34.883989] PREFETCH window: e0000000-efffffff [ 34.884064] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 34.884077] NET: Registered protocol family 2 [ 34.921602] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 34.921816] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 34.923466] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 34.924096] TCP: Hash tables configured (established 131072 bind 65536) [ 34.924162] TCP reno registered [ 34.933658] checking if image is initramfs... it is [ 35.384679] Switched to high resolution mode on CPU 0 [ 35.480730] Freeing initrd memory: 6747k freed [ 35.481134] audit: initializing netlink socket (disabled) [ 35.481210] audit(1189873259.028:1): initialized [ 35.481329] highmem bounce pool size: 64 pages [ 35.482775] VFS: Disk quotas dquot_6.5.1 [ 35.482875] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 35.483018] io scheduler noop registered [ 35.483081] io scheduler anticipatory registered [ 35.483144] io scheduler deadline registered [ 35.483217] io scheduler cfq registered (default) [ 35.483292] PCI: VIA PCI bridge detected. Disabling DAC. [ 35.483419] Boot video device is 0000:01:00.0 [ 35.483570] isapnp: Scanning for PnP cards... [ 35.837132] isapnp: No Plug & Play device found [ 35.855210] Real Time Clock Driver v1.12ac [ 35.855347] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 35.855511] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.855712] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 35.856170] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.856412 ] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 35.856983] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 35.857200] input: Macintosh mouse button emulation as /class/input/input0 [ 35.857317] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 35.857383] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 36.107266] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 36.107435 ] mice: PS/2 mouse device common for all mice [ 36.107586] EISA: Probing bus 0 at eisa.0 [ 36.107667] Cannot allocate resource for EISA slot 4 [ 36.107730] Cannot allocate resource for EISA slot 5 [ 36.107804 ] EISA: Detected 0 cards. [ 36.107941] TCP cubic registered [ 36.108009] NET: Registered protocol family 1 [ 36.108091] Using IPI No-Shortcut mode [ 36.108301] Magic number: 7:114:338 [ 36.108377 ] hash matches device ttyzd [ 36.108524] hash matches device tty59 [ 36.108616] hash matches device ACPI0007:00 [ 36.108977] Freeing unused kernel memory: 364k freed [ 36.188785] input: AT Translated Set 2 keyboard as /class/input/input1 [ 36.310659] Capability LSM initialized [ 36.338111] ACPI: Fan [FAN] (on) [ 36.343064] ACPI: Thermal Zone [THRM] (31 C) [ 36.903564] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 36.903636 ] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 36.904239] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 36.904530] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 36.904601 ] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 36.904778] VP_IDE: chipset revision 6 [ 36.904840] VP_IDE: not 100% native mode: will probe irqs later [ 36.904914 ] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 36.904993] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio [ 36.905164] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:pio, hdd:pio [ 36.905330] Probing IDE interface ide0... [ 36.929867] SCSI subsystem initialized [ 36.933884] libata version 2.21 loaded. [ 36.949170] usbcore: registered new interface driver usbfs [ 36.949259 ] usbcore: registered new interface driver hub [ 36.949339] usbcore: registered new device driver usb [ 36.950057] USB Universal Host Controller Interface driver v3.0 [ 37.024740] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 37.024812] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 37.173511] Floppy drive(s): fd0 is 1.44M [ 37.192868] FDC 0 is a post-1991 82077 [ 37.344787] hda: ST3250824A, ATA DISK drive [ 38.015755 ] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 38.017446] Probing IDE interface ide1... [ 38.585301] sata_via 0000:00:0f.0: version 2.2 [ 38.585324] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 38.585527] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 38.585661] scsi0 : sata_via [ 38.585844] scsi1 : sata_via [ 38.586000] ata1: SATA max UDMA/133 cmd 0x0001e200 ctl 0x0001e302 bmdma 0x0001e600 irq 16 [ 38.586075] ata2: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e502 bmdma 0x0001e608 irq 16 [ 38.591656] hda: max request size: 512KiB [ 38.632489] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) [ 38.656781] hda: cache flushes supported [ 38.656878] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > [ 38.785824] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 38.997397] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 39.105468] Attempting manual resume [ 39.105527] swsusp: Resume From Partition 3:9 [ 39.105529] PM: Checking swsusp image. [ 39.105665] PM: Resume from disk failed. [ 39.137765] kjournald starting. Commit interval 5 seconds [ 39.137842] EXT3-fs: mounted filesystem with ordered data mode. [ 39.336880] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100 [ 39.508537] ata2.00: configured for UDMA/100 [ 39.512060] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5 [ 39.512521] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 39.512592 ] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 39.512767] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 39.512966] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 39.513068] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e900 [ 39.513243] usb usb1: configuration #1 chosen from 1 choice [ 39.513329] hub 1-0:1.0: USB hub found [ 39.513396] hub 1-0:1.0: 2 ports detected [ 39.616275] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 39.616451] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 39.616533] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 39.616625] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000ea00 [ 39.616776] usb usb2: configuration #1 chosen from 1 choice [ 39.616860] hub 2-0:1.0: USB hub found [ 39.616927] hub 2-0:1.0: 2 ports detected [ 39.720052] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 39.720229] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 39.720312] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 39.720405] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000eb00 [ 39.720553] usb usb3: configuration #1 chosen from 1 choice [ 39.720638] hub 3-0:1.0: USB hub found [ 39.720705] hub 3-0:1.0: 2 ports detected [ 39.823844] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 39.824021] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 39.824103] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 39.824196] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000ec00 [ 39.824346] usb usb4: configuration #1 chosen from 1 choice [ 39.824433] hub 4-0:1.0: USB hub found [ 39.824501] hub 4-0:1.0: 2 ports detected [ 39.927739] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 39.927917] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 39.928002] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 39.928113] ehci_hcd 0000:00:10.4: irq 17, io mem 0xf3000000 [ 39.928182] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 39.928331] usb usb5: configuration #1 chosen from 1 choice [ 39.928416] hub 5-0:1.0: USB hub found [ 39.928489] hub 5-0:1.0: 8 ports detected [ 40.031740] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 40.031820] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18 [ 40.035959] eth0: VIA Rhine II at 0x1ed00, 00:01:29:f2:d0:90, IRQ 18. [ 40.037002] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 40.037155] ACPI: PCI Interrupt 0000:00:13.0 [A] -> GSI 17 (level, low) -> IRQ 19 [ 40.089992] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f3002000-f30027ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 40.901573] usb 5-4: new high speed USB device using ehci_hcd and address 2 [ 41.033764] usb 5-4: configuration #1 chosen from 1 choice [ 41.033943] hub 5-4:1.0: USB hub found [ 41.034048] hub 5-4:1.0: 4 ports detected [ 41.360722] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001291000006768] [ 41.376622] usb 5-5: new high speed USB device using ehci_hcd and address 3 [ 41.520112] usb 5-5: configuration #1 chosen from 1 choice [ 41.720049] usb 5-4.1: new low speed USB device using ehci_hcd and address 4 [ 41.818699] usb 5-4.1: configuration #1 chosen from 1 choice [ 47.606501] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 47.897330] NET: Registered protocol family 10 [ 47.897485] lo: Disabled Privacy Extensions [ 48.963445] Linux agpgart interface v0.102 (c) Dave Jones [ 48.997909] agpgart: Detected AGP bridge 0 [ 49.005736] agpgart: AGP aperture is 256M @ 0xd0000000 [ 49.165504] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 49.177978] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 49.821774] gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe100, speed 1217kHz [ 49.956584] nvidia: module license 'NVIDIA' taints kernel. [ 50.350791] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 50.351143] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007 [ 50.397436] input: PC Speaker as /class/input/input2 [ 50.703455] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 50.703534] Uniform CD-ROM driver Revision: 3.20 [ 50.703661] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 50.763431] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 50.957457] usbcore: registered new interface driver libusual [ 50.969444] usbcore: registered new interface driver hiddev [ 51.057887] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 21 [ 51.067187] Initializing USB Mass Storage driver... [ 51.067321] scsi2 : SCSI emulation for USB Mass Storage devices [ 51.071550] usb-storage: device found at 3 [ 51.071554] usb-storage: waiting for device to settle before scanning [ 51.074791] input: Logitech USB Mouse as /class/input/input3 [ 51.074904] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:10.4-4.1 [ 51.075081] usbcore: registered new interface driver usb-storage [ 51.075146] USB Mass Storage support registered. [ 51.075299] usbcore: registered new interface driver usbhid [ 51.075365] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 51.335178] lp: driver loaded but no devices found [ 51.436723] usbcore: registered new interface driver usbserial [ 51.438054] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 51.439388] usbcore: registered new interface driver usbserial_generic [ 51.439460] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 51.443480] /build/buildd/linux- source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS [ 51.444856] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5 [ 51.446199] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0 [ 51.447544] usbcore: registered new interface driver visor [ 51.447614 ] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver [ 51.704634] it87: Found IT8705F chip at 0x290, revision 2 [ 51.706026] it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface [ 51.740014] Adding 2048248k swap on /dev/disk/by-uuid/2aeb63fd-b2cc-42f8-8ddb-2a58e45b7ff9. Priority:-1 extents:1 across:2048248k [ 51.909408] EXT3 FS on hda10, internal journal [ 52.160326] kjournald starting. Commit interval 5 seconds [ 52.160439] EXT3 FS on hda7, internal journal [ 52.160444] EXT3-fs: mounted filesystem with ordered data mode. [ 52.178861] kjournald starting. Commit interval 5 seconds [ 52.178935] EXT3 FS on hda6, internal journal [ 52.178938] EXT3-fs: mounted filesystem with ordered data mode. [ 52.190507] kjournald starting. Commit interval 5 seconds [ 52.190619] EXT3 FS on hda8, internal journal [ 52.190622] EXT3-fs: mounted filesystem with ordered data mode. [ 52.237122] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 52.303466] NTFS volume version 3.1. [ 52.346468] NTFS volume version 3.1. [ 53.586964] NET: Registered protocol family 17 [ 56.059671] usb-storage: device scan complete [ 56.087188] scsi 2:0:0:0: Direct-Access USB2.0 CF CardReader PQ: 0 ANSI: 0 [ 56.091160] scsi 2:0:0:1: Direct-Access USB2.0 CBO CardReader PQ: 0 ANSI: 0 [ 56.097967] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 56.098014] scsi 2:0:0:1: Attached scsi generic sg2 type 0 [ 56.120821] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 56.122385] sd 2:0:0:1: [sdb] Attached SCSI removable disk [ 58.279572] No dock devices found. [ 58.349301] input: Power Button (FF) as /class/input/input4 [ 58.353411] ACPI: Power Button (FF) [PWRF] [ 58.378590] input: Power Button (CM) as /class/input/input5 [ 58.378809] ACPI: Power Button (CM) [PWRB] [ 58.687544] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00) [ 58.687581] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 [ 58.687583] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 [ 58.687586] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 58.741836] eth0: no IPv6 routers present [ 63.560494] ppdev: user-space parallel port driver [ 64.702540] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 64.702545] apm: overridden by ACPI. [ 30.668000] Marking TSC unstable due to: cpufreq changes. [ 30.672000] Time: acpi_pm clocksource has been installed. [ 30.780000] NVRM: API mismatch: the client has the version 1.0-9755, but [ 30.780000] NVRM: this kernel module has the version 100.14.11. Please [ 30.780000] NVRM: make sure that this kernel module and all NVIDIA driver [ 30.780000] NVRM: components have the same version. [ 31.056000] Clocksource tsc unstable (delta = -195983236 ns) [ 31.140000] Bluetooth: Core ver 2.11 [ 31.140000] NET: Registered protocol family 31 [ 31.140000] Bluetooth: HCI device and connection manager initialized [ 31.140000] Bluetooth: HCI socket layer initialized [ 31.164000] Bluetooth: L2CAP ver 2.8 [ 31.164000] Bluetooth: L2CAP socket layer initialized [ 31.300000] Bluetooth: RFCOMM socket layer initialized [ 31.300000] Bluetooth: RFCOMM TTY layer initialized [ 31.300000] Bluetooth: RFCOMM ver 1.8 [ 34.856000] NVRM: API mismatch: the client has the version 1.0-9755, but [ 34.856000] NVRM: this kernel module has the version 100.14.11. Please [ 34.856000] NVRM: make sure that this kernel module and all NVIDIA driver [ 34.856000] NVRM: components have the same version. [ 38.960000] NVRM: API mismatch: the client has the version 1.0-9755, but [ 38.960000] NVRM: this kernel module has the version 100.14.11. Please [ 38.960000] NVRM: make sure that this kernel module and all NVIDIA driver [ 38.960000] NVRM: components have the same version. [ 122.476000] Unable to identify CD-ROM format. [ 249.636000] cdrom: This disc doesn't have any tracks I recognize! [ 1585.256000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 1585.256000 ] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x55 data 16 out [ 1585.256000] res 40/00:03:00:10:01/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 1590.296000] ata2: port is slow to respond, please be patient (Status 0xc0) [ 1595.280000] ata2: soft resetting port [ 1625.672000] ata2.00: qc timeout (cmd 0xa1) [ 1625.672000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1625.672000] ata2.00: revalidation failed (errno=-5) [ 1625.672000] ata2: failed to recover some devices, retrying in 5 secs [ 1635.716000] ata2: port is slow to respond, please be patient (Status 0xc0) [ 1640.700000] ata2: soft resetting port [ 1671.092000] ata2.00 : qc timeout (cmd 0xa1) [ 1671.092000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1671.092000] ata2.00: revalidation failed (errno=-5) [ 1671.092000] ata2.00: limiting speed to UDMA/100:PIO3 [ 1671.092000 ] ata2: failed to recover some devices, retrying in 5 secs [ 1681.136000] ata2: port is slow to respond, please be patient (Status 0xc0) [ 1686.120000] ata2: soft resetting port [ 1716.512000] ata2.00: qc timeout (cmd 0xa1) [ 1716.512000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 1716.512000] ata2.00: revalidation failed (errno=-5) [ 1716.512000] ata2.00: disabled [ 1717.016000] ata2: EH complete