Leann Ogasawara napsal(a): > Hi David, > > Just curious what graphics driver you are using? If you unload that > driver prior to suspending does that make a difference? Just curious. > > Thanks. > xserver-xorg-video-ati [ 0.000000] Linux version 2.6.24-12-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) [ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261984) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261984 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261984 [ 0.000000] On node 0 totalpages: 261984 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 254 pages used for memmap [ 0.000000] HighMem zone: 32354 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6D70 checksum 0 [ 0.000000] ACPI: RSDP 000F6D70, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 3FF6A6BD, 004C (r1 IBM TP-1R 3210 LTP 0) [ 0.000000] ACPI: FACP 3FF6A800, 00F4 (r3 IBM TP-1R 3210 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3FF6A9E7, C4E5 (r1 IBM TP-1R 3210 MSFT 100000E) [ 0.000000] ACPI: FACS 3FF78000, 0040 [ 0.000000] ACPI: SSDT 3FF6A9B4, 0033 (r1 IBM TP-1R 3210 MSFT 100000E) [ 0.000000] ACPI: ECDT 3FF76ECC, 0052 (r1 IBM TP-1R 3210 IBM 1) [ 0.000000] ACPI: TCPA 3FF76F1E, 0032 (r1 IBM TP-1R 3210 PTL 1) [ 0.000000] ACPI: BOOT 3FF76FD8, 0028 (r1 IBM TP-1R 3210 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259938 [ 0.000000] Kernel command line: root=UUID=6fa1feb8-ecd8-45f2-9af0-49fc0ae4b257 ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0180f000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1594.907 MHz processor. [ 3.018026] Console: colour VGA+ 80x25 [ 3.018031] console [tty0] enabled [ 3.018697] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 3.019401] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 3.058877] Memory: 1026560k/1047936k available (2164k kernel code, 20680k reserved, 1007k data, 364k init, 130432k highmem) [ 3.058886] virtual kernel memory layout: [ 3.058887] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 3.058889] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 3.058890] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 3.058892] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 3.058893] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 3.058894] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 3.058895] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 3.058899] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 3.058967] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 3.138989] Calibrating delay using timer specific routine.. 3192.16 BogoMIPS (lpj=6384329) [ 3.139044] Security Framework initialized [ 3.139059] SELinux: Disabled at boot. [ 3.139081] AppArmor: AppArmor initialized [ 3.139087] Failure registering capabilities with primary security module. [ 3.139098] Mount-cache hash table entries: 512 [ 3.139299] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 3.139318] CPU: L1 I cache: 32K, L1 D cache: 32K [ 3.139320] CPU: L2 cache: 1024K [ 3.139324] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000 [ 3.139338] Compat vDSO mapped to ffffe000. [ 3.139358] Checking 'hlt' instruction... OK. [ 3.155442] SMP alternatives: switching to UP code [ 3.157621] Freeing SMP alternatives: 11k freed [ 3.157764] Early unpacking initramfs... done [ 3.568046] ACPI: Core revision 20070126 [ 3.568175] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 3.572859] ACPI: setting ELCR to 0200 (from 0800) [ 3.582845] CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05 [ 3.582851] SMP motherboard not detected. [ 3.582854] Local APIC not detected. Using dummy APIC emulation. [ 3.582904] Brought up 1 CPUs [ 3.582926] CPU0 attaching sched-domain: [ 3.582929] domain 0: span 01 [ 3.582931] groups: 01 [ 3.583142] net_namespace: 64 bytes [ 3.583150] Booting paravirtualized kernel on bare hardware [ 3.583798] Time: 12:43:29 Date: 03/21/08 [ 3.583854] NET: Registered protocol family 16 [ 3.584057] EISA bus registered [ 3.584069] ACPI: bus type pci registered [ 3.584389] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 3.584392] PCI: Using configuration type 1 [ 3.584394] Setting up standard PCI resources [ 3.589040] ACPI: EC: EC description table is found, configuring boot EC [ 3.594712] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 3.597470] ACPI: Interpreter enabled [ 3.597474] ACPI: (supports S0 S3 S4 S5) [ 3.597489] ACPI: Using PIC for interrupt routing [ 3.604180] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 3.604184] ACPI: EC: driver started in poll mode [ 3.604331] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 3.604718] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 3.604722] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 3.605297] PCI: Transparent bridge - 0000:00:1e.0 [ 3.605399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 3.605460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 3.605485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 3.609382] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 3.609578] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 3.609771] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 3.609964] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 3.610141] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 3.610318] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 3.610494] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 3.610688] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 3.610838] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 3.610931] ACPI: Power Resource [PUBS] (on) [ 3.610985] Linux Plug and Play Support v0.97 (c) Adam Belay [ 3.611017] pnp: PnP ACPI init [ 3.611025] ACPI: bus type pnp registered [ 3.612125] pnpacpi: exceeded the max number of mem resources: 12 [ 3.614575] pnp: PnP ACPI: found 12 devices [ 3.614578] ACPI: ACPI bus type pnp unregistered [ 3.614582] PnPBIOS: Disabled by ACPI PNP [ 3.614812] PCI: Using ACPI for IRQ routing [ 3.614816] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 3.634965] NET: Registered protocol family 8 [ 3.634967] NET: Registered protocol family 20 [ 3.635038] AppArmor: AppArmor Filesystem Enabled [ 3.638956] Time: tsc clocksource has been installed. [ 3.646994] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 3.646997] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 3.647000] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 3.647004] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 3.647007] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 3.647010] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 3.647013] system 00:00: iomem range 0x0-0x0 could not be reserved [ 3.647016] system 00:00: iomem range 0x0-0x0 could not be reserved [ 3.647020] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 3.647023] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 3.647026] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 3.647029] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 3.647036] system 00:02: ioport range 0x1000-0x107f has been reserved [ 3.647039] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 3.647042] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 3.647045] system 00:02: ioport range 0x1600-0x162f has been reserved [ 3.647048] system 00:02: ioport range 0x1632-0x167f has been reserved [ 3.647051] system 00:02: ioport range 0x1630-0x1631 has been reserved [ 3.677477] PCI: Bridge: 0000:00:01.0 [ 3.677480] IO window: 3000-3fff [ 3.677484] MEM window: c0100000-c01fffff [ 3.677487] PREFETCH window: e0000000-e7ffffff [ 3.677499] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 3.677501] IO window: 00004000-000040ff [ 3.677505] IO window: 00004400-000044ff [ 3.677509] PREFETCH window: e8000000-ebffffff [ 3.677513] MEM window: c4000000-c7ffffff [ 3.677517] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 3.677519] IO window: 00004800-000048ff [ 3.677523] IO window: 00004c00-00004cff [ 3.677527] PREFETCH window: ec000000-efffffff [ 3.677531] MEM window: c8000000-cbffffff [ 3.677535] PCI: Bridge: 0000:00:1e.0 [ 3.677538] IO window: 4000-8fff [ 3.677543] MEM window: c0200000-cfffffff [ 3.677547] PREFETCH window: e8000000-efffffff [ 3.677563] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 3.677929] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 3.677932] PCI: setting IRQ 11 as level-triggered [ 3.677936] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 3.678276] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 3.678279] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 3.678295] NET: Registered protocol family 2 [ 3.715043] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 3.715366] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 3.716965] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 3.718114] TCP: Hash tables configured (established 131072 bind 65536) [ 3.718119] TCP reno registered [ 3.727178] checking if image is initramfs... it is [ 4.178942] Switched to high resolution mode on CPU 0 [ 4.523290] Freeing initrd memory: 7558k freed [ 4.523533] Simple Boot Flag at 0x35 set to 0x1 [ 4.523919] audit: initializing netlink socket (disabled) [ 4.523939] audit(1206103409.464:1): initialized [ 4.524147] highmem bounce pool size: 64 pages [ 4.526386] VFS: Disk quotas dquot_6.5.1 [ 4.526483] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 4.526657] io scheduler noop registered [ 4.526660] io scheduler anticipatory registered [ 4.526662] io scheduler deadline registered [ 4.526679] io scheduler cfq registered (default) [ 4.526755] Boot video device is 0000:01:00.0 [ 4.527129] isapnp: Scanning for PnP cards... [ 4.880144] isapnp: No Plug & Play device found [ 4.913723] Real Time Clock Driver v1.12ac [ 4.913838] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 4.914025] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 4.914966] serial 00:09: activated [ 4.915235] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 4.915425] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 4.915436] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 4.916093] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 4.916178] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 4.916287] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.922535] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.922540] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.922956] mice: PS/2 mouse device common for all mice [ 4.923077] EISA: Probing bus 0 at eisa.0 [ 4.923083] Cannot allocate resource for EISA slot 1 [ 4.923087] Cannot allocate resource for EISA slot 2 [ 4.923090] Cannot allocate resource for EISA slot 3 [ 4.923092] Cannot allocate resource for EISA slot 4 [ 4.923094] Cannot allocate resource for EISA slot 5 [ 4.923096] Cannot allocate resource for EISA slot 6 [ 4.923099] Cannot allocate resource for EISA slot 7 [ 4.923101] Cannot allocate resource for EISA slot 8 [ 4.923103] EISA: Detected 0 cards. [ 4.923107] cpuidle: using governor ladder [ 4.923109] cpuidle: using governor menu [ 4.923220] NET: Registered protocol family 1 [ 4.923255] Using IPI No-Shortcut mode [ 4.923291] registered taskstats version 1 [ 4.923416] Magic number: 0:515:734 [ 4.923573] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.923575] EDD information not available. [ 4.923841] Freeing unused kernel memory: 364k freed [ 4.926400] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 6.144152] fuse init (API version 7.9) [ 6.167715] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 6.167722] ACPI: Processor [CPU] (supports 8 throttling states) [ 6.170308] ACPI: Thermal Zone [THM0] (52 C) [ 6.938018] usbcore: registered new interface driver usbfs [ 6.938047] usbcore: registered new interface driver hub [ 6.962896] usbcore: registered new device driver usb [ 7.032925] SCSI subsystem initialized [ 7.046575] USB Universal Host Controller Interface driver v3.0 [ 7.046661] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 7.046675] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 7.046680] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.047167] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 7.047194] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 7.047364] usb usb1: configuration #1 chosen from 1 choice [ 7.047391] hub 1-0:1.0: USB hub found [ 7.047397] hub 1-0:1.0: 2 ports detected [ 7.122569] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 7.122574] Copyright (c) 1999-2006 Intel Corporation. [ 7.142542] libata version 3.00 loaded. [ 7.151077] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 7.151083] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 7.151095] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 7.151100] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.151129] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 7.151154] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 7.151301] usb usb2: configuration #1 chosen from 1 choice [ 7.151330] hub 2-0:1.0: USB hub found [ 7.151336] hub 2-0:1.0: 2 ports detected [ 7.255089] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 7.255095] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 7.255108] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 7.255113] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.255142] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 7.255167] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 7.255312] usb usb3: configuration #1 chosen from 1 choice [ 7.255345] hub 3-0:1.0: USB hub found [ 7.255352] hub 3-0:1.0: 2 ports detected [ 7.359964] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 7.359970] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 7.359987] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 7.359991] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.360027] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 7.363950] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.363957] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 7.363966] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 7.378529] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.378667] usb usb4: configuration #1 chosen from 1 choice [ 7.378695] hub 4-0:1.0: USB hub found [ 7.378703] hub 4-0:1.0: 6 ports detected [ 7.482842] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 7.737342] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:39:2a:99 [ 7.775628] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 7.775771] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 7.775781] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 7.775824] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 7.775838] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 7.782396] ata_piix 0000:00:1f.1: version 2.12 [ 7.782416] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 7.782474] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 7.783176] scsi0 : ata_piix [ 7.783723] scsi1 : ata_piix [ 7.784696] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 7.784700] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 7.954732] ata1.00: HPA unlocked: 110238363 -> 117210240, native 117210240 [ 7.954741] ata1.00: ATA-6: ST96812A, 3.04, max UDMA/100 [ 7.954745] ata1.00: 117210240 sectors, multi 16: LBA48 [ 7.970824] ata1.00: configured for UDMA/100 [ 8.447054] ata2.00: ATAPI: UJDA745 DVD/CDRW, 1.03, max UDMA/33 [ 8.618970] ata2.00: configured for UDMA/33 [ 8.619118] scsi 0:0:0:0: Direct-Access ATA ST96812A 3.04 PQ: 0 ANSI: 5 [ 8.621224] scsi 1:0:0:0: CD-ROM MATSHITA UJDA745 DVD/CDRW 1.03 PQ: 0 ANSI: 5 [ 8.638429] Driver 'sd' needs updating - please use bus_type methods [ 8.638537] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 8.638551] sd 0:0:0:0: [sda] Write Protect is off [ 8.638554] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.638571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.638624] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 8.638635] sd 0:0:0:0: [sda] Write Protect is off [ 8.638637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.638653] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.638657] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 8.649696] sda1 sda2 sda3 sda4 [ 8.663205] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.671446] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.671470] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 8.674345] Clocksource tsc unstable (delta = -624535623 ns) [ 8.678331] Time: acpi_pm clocksource has been installed. [ 8.680434] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 8.680439] Uniform CD-ROM driver Revision: 3.20 [ 8.680502] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 12.535804] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 12.535811] swsusp: Basic memory bitmaps created [ 12.554855] swsusp: Basic memory bitmaps freed [ 12.563509] JFS: nTxBlock = 8084, nTxLock = 64675 [ 33.051793] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 33.216553] iTCO_vendor_support: vendor-support=0 [ 33.380512] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 33.380615] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 33.380649] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 33.760506] Non-volatile memory driver v1.2 [ 34.016472] parport_pc 00:0a: reported by Plug and Play ACPI [ 34.016517] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 34.108403] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 34.172450] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.213059] Linux agpgart interface v0.102 [ 34.328325] intel_rng: FWH not detected [ 34.364337] irda_init() [ 34.364370] NET: Registered protocol family 23 [ 34.472522] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 34.472526] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 34.472529] thinkpad_acpi: ThinkPad BIOS 1RETDPWW (3.21 ), EC 1RHT71WW-3.04 [ 34.472531] thinkpad_acpi: IBM ThinkPad T40 [ 34.484212] thinkpad_acpi: another device driver is already handling bay events [ 34.484218] thinkpad_acpi: disabling subdriver bay [ 34.487410] input: ThinkPad Extra Buttons as /devices/virtual/input/input3 [ 34.544419] input: Power Button (FF) as /devices/virtual/input/input4 [ 34.576302] ACPI: Power Button (FF) [PWRF] [ 34.576379] input: Lid Switch as /devices/virtual/input/input5 [ 34.592492] ACPI: Lid Switch [LID] [ 34.592547] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 34.616290] ACPI: Sleep Button (CM) [SLPB] [ 34.628332] agpgart: Detected an Intel 855PM Chipset. [ 34.641474] agpgart: AGP aperture is 256M @ 0xd0000000 [ 34.788335] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 34.788496] nsc-ircc, chip->init [ 34.788505] nsc-ircc, Found chip at base=0x02e [ 34.788529] nsc-ircc, driver loaded (Dag Brattli) [ 34.788537] nsc_ircc_open(), can't get iobase of 0x2f8 [ 34.788564] nsc-ircc, Found chip at base=0x02e [ 34.788588] nsc-ircc, driver loaded (Dag Brattli) [ 34.788591] nsc_ircc_open(), can't get iobase of 0x2f8 [ 34.789182] nsc-ircc 00:0b: disabled [ 35.682799] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input7 [ 35.712130] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 35.916349] ieee80211_crypt: registered algorithm 'NULL' [ 35.947080] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 35.947085] ieee80211: Copyright (C) 2004-2005 Intel Corporation