[sata_sil] SATA PCI not working (chipset: SiI3512)

Bug #121612 reported by Dave Walker on 2007-06-21
4
Affects Status Importance Assigned to Milestone
linux-source-2.6.20 (Ubuntu)
Undecided
Unassigned
linux-source-2.6.22 (Ubuntu)
Medium
Unassigned

Bug Description

Binary package hint: linux-source-2.6.20

* fdisk -l doesn't show the attached hd
* attached hd is "Seagate ST3500630AS 500GB Hard Drive SATAII 16MB Cache 7200RPM" - currently unformatted

$ lspci | grep SATA
02:00.0 RAID bus controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)

$ dmesg | grep ata
[ 0.000000] BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
[ 47.165395] Memory: 508088k/523520k available (1992k kernel code, 14876k reserved, 896k data, 328k init, 0k highmem)
[ 47.165412] .data : 0xc02f2354 - 0xc03d26d4 ( 896 kB)
[ 50.622763] libata version 2.20 loaded.
[ 52.876378] sata_sil 0000:02:00.0: version 2.2
[ 52.876504] ata1: SATA max UDMA/100 cmd 0xe0878080 ctl 0xe087808a bmdma 0xe0878000 irq 19
[ 52.876539] ata2: SATA max UDMA/100 cmd 0xe08780c0 ctl 0xe08780ca bmdma 0xe0878008 irq 19
[ 52.876553] scsi0 : sata_sil
[ 55.090696] ata1: failed to resume link for reset (errno=-16)
[ 55.090701] ata1: prereset failed (errno=-16)
[ 55.090750] ata1: reset failed, giving up
[ 55.090812] scsi1 : sata_sil
[ 57.301104] ata2: failed to resume link for reset (errno=-16)
[ 57.301109] ata2: prereset failed (errno=-16)
[ 57.301158] ata2: reset failed, giving up
[ 62.770123] EXT3-fs: mounted filesystem with ordered data mode.
[ 212.548142] EXT3-fs: mounted filesystem with ordered data mode.

$ uname -r
2.6.20-16-generic

Dave Walker (davewalker) on 2007-06-21
description: updated
Chuck Short (zulcss) wrote :

Please attach the full output of lspci -vvn

THanks
chuck

Changed in linux-source-2.6.20:
status: New → Incomplete
Jonathan Hudson (jh+lpd) wrote :

Data point : This device didn't show any attached disks in 7.04, [x86_84] (2.6.20-16-generic), but it works fine on 7.10 [ia32] (2.6.22-11-generic).

-jh

Dave Walker (davewalker) wrote :

I am still unable to see the device in "fdisk -l" - this issue on 7.10 (Kernel - 2.6.22-11-generic)

Changed in linux-source-2.6.20:
status: Incomplete → New

Hi Dave, now that the 7.10 Gutsy Gibbon release of Ubuntu is out (kernel 2.6.22-14), we were wondering if you can still reproduce this issue. Could you please download and try the new version of Ubuntu from http://www.ubuntu.com/getubuntu/download and report back your results? If the issue is still present in the new release, please attach the following information for the new release:

* uname -a > uname-a.log
* cat /proc/version_signature > version.log
* dmesg > dmesg.log
* sudo lspci -vvnn > lspci-vvnn.log

Please be sure to attach each file as a separate attachment. For more information regarding the kernel team bug policy, please refer to
https://wiki.ubuntu.com/KernelTeamBugPolicies . Thanks again and we appreciate your help and feedback.

Changed in linux-source-2.6.22:
importance: Undecided → Medium
status: New → Incomplete

This bug report is being closed because we received no reponse to the last inquiry for information. Please reopen it if this is still an issue in the current Ubuntu release. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Please don't hesitate to submit bug reports in the future, we really appreciate it. Thanks again!

Changed in linux-source-2.6.22:
status: Incomplete → Invalid
Changed in linux-source-2.6.20:
status: New → Won't Fix
To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers