[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable) [ 0.000000] BIOS-e820: 0000000017ff0000 - 0000000017ffec00 (ACPI data) [ 0.000000] BIOS-e820: 0000000017ffec00 - 0000000018000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 383MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 98288) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 98288 [ 0.000000] HighMem 98288 -> 98288 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 98288 [ 0.000000] On node 0 totalpages: 98288 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 735 pages used for memmap [ 0.000000] Normal zone: 93457 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7160 checksum 0 [ 0.000000] ACPI: RSDP 000F7160, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 17FF57B2, 002C (r1 PTLTD RSDT 6041060 LTP 0) [ 0.000000] ACPI: FACP 17FFEB65, 0074 (r1 IBM TP-A21m 6041060 0) [ 0.000000] ACPI: DSDT 17FF57DE, 9387 (r1 IBM TP-A21m 6041060 MSFT 100000C) [ 0.000000] ACPI: FACS 17FFF000, 0040 [ 0.000000] ACPI: BOOT 17FFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6041060 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e7f80000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97521 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- debian-installer/language=nl console-setup/layoutcode=us console-setup/variantcode=intl [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0130d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 797.062 MHz processor. [ 18.560136] Console: colour VGA+ 80x25 [ 18.560149] console [tty0] enabled [ 18.561220] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 18.562639] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 18.603334] Memory: 377252k/393152k available (2157k kernel code, 15252k reserved, 998k data, 364k init, 0k highmem) [ 18.603356] virtual kernel memory layout: [ 18.603359] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 18.603363] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 18.603367] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB) [ 18.603370] lowmem : 0xc0000000 - 0xd7ff0000 ( 383 MB) [ 18.603374] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 18.603377] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 18.603381] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 18.603389] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 18.603476] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 18.683465] Calibrating delay using timer specific routine.. 1595.55 BogoMIPS (lpj=3191112) [ 18.683533] Security Framework initialized [ 18.683553] SELinux: Disabled at boot. [ 18.683587] AppArmor: AppArmor initialized [ 18.683597] Failure registering capabilities with primary security module. [ 18.683618] Mount-cache hash table entries: 512 [ 18.683907] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 18.683937] CPU: L1 I cache: 16K, L1 D cache: 16K [ 18.683943] CPU: L2 cache: 256K [ 18.683950] CPU serial number disabled. [ 18.683956] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 [ 18.683982] Compat vDSO mapped to ffffe000. [ 18.684015] Checking 'hlt' instruction... OK. [ 18.700072] SMP alternatives: switching to UP code [ 18.703388] Freeing SMP alternatives: 11k freed [ 18.703735] Early unpacking initramfs... done [ 19.634591] ACPI: Core revision 20070126 [ 19.635126] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 19.644087] ACPI: setting ELCR to 0200 (from 0e20) [ 19.865242] CPU0: Intel Pentium III (Coppermine) stepping 0a [ 19.865259] SMP motherboard not detected. [ 19.865265] Local APIC not detected. Using dummy APIC emulation. [ 19.865392] Brought up 1 CPUs [ 19.865446] CPU0 attaching sched-domain: [ 19.865454] domain 0: span 01 [ 19.865458] groups: 01 [ 19.865988] net_namespace: 64 bytes [ 19.866004] Booting paravirtualized kernel on bare hardware [ 19.867513] Time: 17:10:06 Date: 04/30/08 [ 19.867599] NET: Registered protocol family 16 [ 19.868173] EISA bus registered [ 19.868198] ACPI: bus type pci registered [ 19.868906] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 [ 19.868916] PCI: Using configuration type 1 [ 19.868921] Setting up standard PCI resources [ 19.877188] ACPI: EC: Look up EC in DSDT [ 20.156321] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 20.264815] ACPI: Interpreter enabled [ 20.264823] ACPI: (supports S0 S1 S3 S4 S5) [ 20.264862] ACPI: Using PIC for interrupt routing [ 20.486636] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 [ 20.486647] ACPI: EC: driver started in interrupt mode [ 20.486781] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.487411] PCI quirk: region 1000-103f claimed by PIIX4 ACPI [ 20.487420] PCI quirk: region 1040-104f claimed by PIIX4 SMB [ 20.487432] PIIX4 devres C PIO at 15e8-15ef [ 20.487439] PIIX4 devres I PIO at 03f0-03f7 [ 20.487446] PIIX4 devres J PIO at 002e-002f [ 20.487877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.488040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 20.499315] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11) [ 20.499761] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 20.500204] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) [ 20.500647] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11) [ 20.501073] ACPI: Power Resource [PSER] (on) [ 20.501184] ACPI: Power Resource [PSIO] (on) [ 20.501313] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.501400] pnp: PnP ACPI init [ 20.501423] ACPI: bus type pnp registered [ 20.502999] pnpacpi: exceeded the max number of mem resources: 12 [ 20.612100] pnp: PnP ACPI: found 15 devices [ 20.612110] ACPI: ACPI bus type pnp unregistered [ 20.612120] PnPBIOS: Disabled by ACPI PNP [ 20.612795] PCI: Using ACPI for IRQ routing [ 20.612805] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.634466] NET: Registered protocol family 8 [ 20.634473] NET: Registered protocol family 20 [ 20.634669] AppArmor: AppArmor Filesystem Enabled [ 20.638443] Time: tsc clocksource has been installed. [ 20.646547] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 20.646557] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 20.646565] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 20.646573] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 20.646580] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 20.646588] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 20.646596] system 00:00: iomem range 0x0-0x0 could not be reserved [ 20.646603] system 00:00: iomem range 0x0-0x0 could not be reserved [ 20.646610] system 00:00: iomem range 0x0-0x0 could not be reserved [ 20.646618] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 20.646626] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 20.646633] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 20.646654] system 00:02: ioport range 0x1000-0x103f has been reserved [ 20.646662] system 00:02: ioport range 0x1040-0x104f has been reserved [ 20.646670] system 00:02: ioport range 0xfe00-0xfe0f has been reserved [ 20.646698] system 00:09: ioport range 0x15e0-0x15ef has been reserved [ 20.677861] PCI: Bridge: 0000:00:01.0 [ 20.677870] IO window: 2000-2fff [ 20.677879] MEM window: f4200000-f5ffffff [ 20.677887] PREFETCH window: 30000000-300fffff [ 20.677895] PCI: Bus 2, cardbus bridge: 0000:00:02.0 [ 20.677901] IO window: 00001400-000014ff [ 20.677908] IO window: 00001c00-00001cff [ 20.677915] PREFETCH window: 20000000-23ffffff [ 20.677922] MEM window: 24000000-27ffffff [ 20.677929] PCI: Bus 6, cardbus bridge: 0000:00:02.1 [ 20.677934] IO window: 00003000-000030ff [ 20.677941] IO window: 00003400-000034ff [ 20.677948] PREFETCH window: 28000000-2bffffff [ 20.677955] MEM window: 2c000000-2fffffff [ 20.679012] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 20.679021] PCI: setting IRQ 9 as level-triggered [ 20.679027] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 20.679862] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 20.679869] PCI: setting IRQ 11 as level-triggered [ 20.679875] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 20.679923] NET: Registered protocol family 2 [ 20.718643] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 20.719280] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 20.719650] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 20.720148] TCP: Hash tables configured (established 16384 bind 16384) [ 20.720156] TCP reno registered [ 20.730847] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 21.517005] it is [ 22.493418] Freeing initrd memory: 7665k freed [ 22.493946] Simple Boot Flag value 0xff read from CMOS RAM was invalid [ 22.493958] Simple Boot Flag at 0x35 set to 0x1 [ 22.494887] audit: initializing netlink socket (disabled) [ 22.494923] audit(1209575407.680:1): initialized [ 22.501024] VFS: Disk quotas dquot_6.5.1 [ 22.501344] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 22.501790] io scheduler noop registered [ 22.501797] io scheduler anticipatory registered [ 22.501803] io scheduler deadline registered [ 22.501844] io scheduler cfq registered (default) [ 22.501867] Limiting direct PCI/PCI transfers. [ 22.501895] PCI: Firmware left 0000:00:03.0 e100 interrupts enabled, disabling [ 22.501940] Boot video device is 0000:01:00.0 [ 22.502657] isapnp: Scanning for PnP cards... [ 22.855785] isapnp: No Plug & Play device found [ 22.946788] Real Time Clock Driver v1.12ac [ 22.947030] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.947251] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.947584] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 22.949101] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.950542] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 22.950553] PCI: setting IRQ 10 as level-triggered [ 22.950561] ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 22.953032] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.953219] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 22.953502] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 22.970936] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.970950] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.981117] mice: PS/2 mouse device common for all mice [ 22.981424] EISA: Probing bus 0 at eisa.0 [ 22.981440] Cannot allocate resource for EISA slot 1 [ 22.981447] Cannot allocate resource for EISA slot 2 [ 22.981453] Cannot allocate resource for EISA slot 3 [ 22.981476] EISA: Detected 0 cards. [ 22.981484] cpuidle: using governor ladder [ 22.981489] cpuidle: using governor menu [ 22.981914] NET: Registered protocol family 1 [ 22.981996] Using IPI No-Shortcut mode [ 22.982074] registered taskstats version 1 [ 22.982324] Magic number: 4:661:189 [ 22.982398] hash matches device ttys1 [ 22.982547] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 22.982553] EDD information not available. [ 22.983820] Freeing unused kernel memory: 364k freed [ 22.990455] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 24.724015] fuse init (API version 7.9) [ 24.803734] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 24.803751] ACPI: Processor [CPU] (supports 8 throttling states) [ 24.809387] ACPI: Thermal Zone [THM0] (58 C) [ 25.641185] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 25.641197] e100: Copyright(c) 1999-2006 Intel Corporation [ 25.641323] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 26.403654] e100: eth0: e100_probe: addr 0xf4120000, irq 10, MAC addr 00:10:a4:84:9f:fb [ 27.089402] SCSI subsystem initialized [ 27.211938] usbcore: registered new interface driver usbfs [ 27.211998] usbcore: registered new interface driver hub [ 27.234431] usbcore: registered new device driver usb [ 27.338589] USB Universal Host Controller Interface driver v3.0 [ 27.339707] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 27.339716] PCI: setting IRQ 5 as level-triggered [ 27.339724] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 27.339750] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 27.340289] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 27.340336] uhci_hcd 0000:00:07.2: irq 5, io base 0x00001860 [ 27.340722] usb usb1: configuration #1 chosen from 1 choice [ 27.340787] hub 1-0:1.0: USB hub found [ 27.340803] hub 1-0:1.0: 2 ports detected [ 27.386342] libata version 3.00 loaded. [ 27.526379] ata_piix 0000:00:07.1: version 2.12 [ 27.554157] scsi0 : ata_piix [ 27.582286] Floppy drive(s): fd0 is 1.44M [ 27.599827] FDC 0 is a National Semiconductor PC87306 [ 27.604278] scsi1 : ata_piix [ 27.682115] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 27.815312] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14 [ 27.815326] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15 [ 27.858354] usb 1-1: configuration #1 chosen from 1 choice [ 27.978571] ata1.00: ATA-5: IC25N020ATDA04-0, DA3OA70A, max UDMA/100 [ 27.978584] ata1.00: 39070080 sectors, multi 16: LBA [ 27.994493] ata1.00: configured for UDMA/33 [ 28.314099] ata2.00: ATAPI: MATSHITADVD-ROM SR-8175, G228, max UDMA/33 [ 28.477936] ata2.00: configured for UDMA/33 [ 28.478261] scsi 0:0:0:0: Direct-Access ATA IC25N020ATDA04-0 DA3O PQ: 0 ANSI: 5 [ 28.479288] scsi 1:0:0:0: CD-ROM MATSHITA DVD-ROM SR-8175 G228 PQ: 0 ANSI: 5 [ 29.125827] Driver 'sd' needs updating - please use bus_type methods [ 29.131587] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB) [ 29.131631] sd 0:0:0:0: [sda] Write Protect is off [ 29.131639] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.131693] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.131827] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB) [ 29.131858] sd 0:0:0:0: [sda] Write Protect is off [ 29.131865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.131915] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.131925] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 29.156143] usbcore: registered new interface driver hiddev [ 29.169888] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/input/input2 [ 29.185239] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:07.2-1 [ 29.185284] usbcore: registered new interface driver usbhid [ 29.185295] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 29.389948] sda1 [ 29.390123] sd 0:0:0:0: [sda] Attached SCSI disk [ 29.405575] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 29.405590] Uniform CD-ROM driver Revision: 3.20 [ 29.405713] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 29.408111] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 29.408175] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 29.848724] end_request: I/O error, dev fd0, sector 0 [ 30.168520] Clocksource tsc unstable (delta = -316699017 ns) [ 30.195957] Time: acpi_pm clocksource has been installed. [ 35.744237] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 35.819031] ISO 9660 Extensions: RRIP_1991A [ 36.190399] Registering unionfs 1.4 [ 36.190410] unionfs: debugging is not enabled [ 36.221820] loop: module loaded [ 36.555407] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 170.090700] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 172.222012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 172.776383] parport_pc 00:0d: reported by Plug and Play ACPI [ 172.776438] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 172.925493] Linux agpgart interface v0.102 [ 172.985589] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 173.247403] irda_init() [ 173.247451] NET: Registered protocol family 23 [ 173.453276] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device [ 173.453290] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module! [ 173.453310] piix4_smbus: probe of 0000:00:07.3 failed with error -1 [ 173.557210] agpgart: Detected an Intel 440BX Chipset. [ 173.561589] agpgart: AGP aperture is 64M @ 0xf8000000 [ 173.773089] Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130] [ 173.773119] Yenta: Using INTVAL to route CSC interrupts to PCI [ 173.773125] Yenta: Routing CardBus interrupts to PCI [ 173.773133] Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66 [ 174.005266] Yenta: ISA IRQ mask 0x0018, PCI irq 9 [ 174.005277] Socket status: 30000006 [ 174.007055] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 174.007080] nsc-ircc, chip->init [ 174.007086] nsc-ircc, Found chip at base=0x02e [ 174.007118] nsc-ircc, driver loaded (Dag Brattli) [ 174.007134] nsc_ircc_open(), can't get iobase of 0x2f8 [ 174.007159] nsc-ircc, Found chip at base=0x02e [ 174.007190] nsc-ircc, driver loaded (Dag Brattli) [ 174.007197] nsc_ircc_open(), can't get iobase of 0x2f8 [ 174.007590] nsc-ircc 00:0e: disabled [ 174.073067] Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130] [ 174.073092] Yenta: Using INTVAL to route CSC interrupts to PCI [ 174.073098] Yenta: Routing CardBus interrupts to PCI [ 174.073107] Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66 [ 174.304987] Yenta: ISA IRQ mask 0x0018, PCI irq 11 [ 174.304998] Socket status: 30000020 [ 174.901432] input: Power Button (FF) as /devices/virtual/input/input4 [ 174.928928] ACPI: Power Button (FF) [PWRF] [ 174.929119] input: Lid Switch as /devices/virtual/input/input5 [ 174.956432] ACPI: Lid Switch [LID] [ 174.956740] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 174.984344] ACPI: Sleep Button (CM) [SLPB] [ 175.024160] pccard: CardBus card inserted into slot 1 [ 177.319949] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/LNXVIDEO:00/input/input7 [ 177.346821] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 179.362584] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 179.928570] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1924kHz [ 180.002845] ACPI: AC Adapter [AC] (off-line) [ 180.036898] ACPI: Battery Slot [BAT0] (battery present) [ 183.673947] cs: IO port probe 0x100-0x3af: clean. [ 183.674845] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 183.675241] cs: IO port probe 0x820-0x8ff: clean. [ 183.675583] cs: IO port probe 0xc00-0xcf7: clean. [ 183.676226] cs: IO port probe 0xa00-0xaff: clean. [ 183.677178] cs: IO port probe 0x100-0x3af: clean. [ 183.677998] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 183.678392] cs: IO port probe 0x820-0x8ff: clean. [ 183.678781] cs: IO port probe 0xc00-0xcf7: clean. [ 183.679416] cs: IO port probe 0xa00-0xaff: clean. [ 184.408150] PCI: Enabling device 0000:06:00.0 (0000 -> 0002) [ 184.408175] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 184.408200] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 184.679966] p54: LM86 firmware [ 184.679978] p54: FW rev 2.7.0.0 - Softmac protocol 4.1 [ 185.133605] 0000:06:00.0 (prism54pci): Cannot read eeprom! [ 185.133699] ACPI: PCI interrupt for device 0000:06:00.0 disabled [ 185.133743] prism54pci: probe of 0000:06:00.0 failed with error -22 [ 186.811638] ip_tables: (C) 2000-2006 Netfilter Core Team [ 188.772132] ACPI: ACPI Dock Station Driver [ 195.349219] IBM machine detected. Enabling interrupts during APM calls. [ 195.349236] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 195.349243] apm: overridden by ACPI. [ 195.660143] lp0: using parport0 (interrupt-driven). [ 195.801141] ppdev: user-space parallel port driver [ 198.812711] Non-volatile memory driver v1.2 [ 198.913615] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 198.913629] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 198.913635] thinkpad_acpi: ThinkPad BIOS KXET33WW (1.06 ), EC unknown [ 199.029146] thinkpad_acpi: another device driver is already handling bay events [ 199.029166] thinkpad_acpi: disabling subdriver bay [ 199.031879] input: ThinkPad Extra Buttons as /devices/virtual/input/input8 [ 199.603766] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input9 [ 200.075379] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 203.389140] ttyS1: LSR safety check engaged! [ 204.967578] Bluetooth: Core ver 2.11 [ 204.975459] NET: Registered protocol family 31 [ 204.975472] Bluetooth: HCI device and connection manager initialized [ 204.975483] Bluetooth: HCI socket layer initialized [ 205.120253] Bluetooth: L2CAP ver 2.9 [ 205.120266] Bluetooth: L2CAP socket layer initialized [ 205.157522] Bluetooth: RFCOMM socket layer initialized [ 205.158718] Bluetooth: RFCOMM TTY layer initialized [ 205.158728] Bluetooth: RFCOMM ver 1.8 [ 228.335942] NET: Registered protocol family 10 [ 228.337973] lo: Disabled Privacy Extensions [ 228.340158] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 251.453783] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 309.407349] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 837.187429] end_request: I/O error, dev fd0, sector 0 [ 837.211332] end_request: I/O error, dev fd0, sector 0 [ 837.380863] program gparted is using a deprecated SCSI ioctl, please convert it to SG_IO [ 844.520402] end_request: I/O error, dev fd0, sector 0 [ 844.544388] end_request: I/O error, dev fd0, sector 0 [ 844.549801] program gparted is using a deprecated SCSI ioctl, please convert it to SG_IO [ 913.666903] end_request: I/O error, dev fd0, sector 0 [ 913.694880] end_request: I/O error, dev fd0, sector 0 [ 913.700752] program gparted is using a deprecated SCSI ioctl, please convert it to SG_IO [ 1020.870838] pccard: card ejected from slot 1 [ 1025.107039] pccard: CardBus card inserted into slot 1 [ 1025.107356] PCI: Enabling device 0000:06:00.0 (0000 -> 0002) [ 1025.107373] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1025.107396] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 1025.976977] p54: LM86 firmware [ 1025.976994] p54: FW rev 2.7.0.0 - Softmac protocol 4.1 [ 1027.640376] 0000:06:00.0 (prism54pci): Cannot read eeprom! [ 1027.640477] ACPI: PCI interrupt for device 0000:06:00.0 disabled [ 1027.640519] prism54pci: probe of 0000:06:00.0 failed with error -22 [ 1039.026757] pccard: card ejected from slot 1 [ 1043.905462] pccard: CardBus card inserted into slot 1 [ 1043.905781] PCI: Enabling device 0000:06:00.0 (0000 -> 0002) [ 1043.905798] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1043.905821] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 1044.008118] p54: LM86 firmware [ 1044.008133] p54: FW rev 2.7.0.0 - Softmac protocol 4.1 [ 1044.304951] 0000:06:00.0 (prism54pci): Cannot read eeprom! [ 1044.306182] ACPI: PCI interrupt for device 0000:06:00.0 disabled [ 1044.307265] prism54pci: probe of 0000:06:00.0 failed with error -22