[ 0.000000] Linux version 2.6.20-16-generic (root@king) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 19:00:28 UTC 2007 (Ubuntu 2.6.20-16.29-generic) [ 0.000000] Command line: root=UUID=17453b9e-337b-4392-aa9d-1b8ec341b94d ro quiet splash noapic irqpoll [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bee0000 (usable) [ 0.000000] BIOS-e820: 000000007bee0000 - 000000007bee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bee3000 - 000000007bef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bef0000 - 000000007bf00000 (reserved) [ 0.000000] BIOS-e820: 000000007c000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 507616) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x00000000000f83c0 [ 0.000000] ACPI: RSDT (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ 0x000000007bee3040 [ 0.000000] ACPI: FADT (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ 0x000000007bee3100 [ 0.000000] ACPI: BOOT (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ 0x000000007bee8b40 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000007bee8c80 [ 0.000000] ACPI: HPET (v001 DELL bMk 0x42302e31 AWRD 0x00000098) @ 0x000000007bee8ec0 [ 0.000000] ACPI: MCFG (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ 0x000000007bee8f40 [ 0.000000] ACPI: SLIC (v001 DELL bMk 0x42302e31 AWRD 0x0100000e) @ 0x000000007bee8fc0 [ 0.000000] ACPI: MADT (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ 0x000000007bee8bc0 [ 0.000000] ACPI: DSDT (v001 DELL AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007bee0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 507616) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007bee0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 507616 [ 0.000000] On node 0 totalpages: 507519 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1102 pages reserved [ 0.000000] DMA zone: 2841 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6884 pages used for memmap [ 0.000000] DMA32 zone: 496636 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 [ 0.000000] I/O APIC #2 at 0xFEC00000. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Processors: 2 [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 499477 [ 0.000000] Kernel command line: root=UUID=17453b9e-337b-4392-aa9d-1b8ec341b94d ro quiet splash noapic irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 15.218736] Console: colour VGA+ 80x25 [ 15.219598] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 15.220901] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.221533] Checking aperture... [ 15.221537] CPU 0: aperture @ e752000000 size 32 MB [ 15.221539] Aperture too small (32 MB) [ 15.228257] No AGP bridge found [ 15.244773] Memory: 1987888k/2030464k available (2217k kernel code, 42188k reserved, 1162k data, 304k init) [ 15.324771] Calibrating delay using timer specific routine.. 4022.38 BogoMIPS (lpj=8044771) [ 15.324827] Security Framework v1.0.0 initialized [ 15.324834] SELinux: Disabled at boot. [ 15.324858] Mount-cache hash table entries: 256 [ 15.324998] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.325000] CPU: L2 Cache: 512K (64 bytes/line) [ 15.325003] CPU 0/0 -> Node 0 [ 15.325006] CPU: Physical Processor ID: 0 [ 15.325007] CPU: Processor Core ID: 0 [ 15.325030] SMP alternatives: switching to UP code [ 15.325271] Early unpacking initramfs... done [ 15.617852] ACPI: Core revision 20060707 [ 15.618432] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 15.621573] ACPI: setting ELCR to 0200 (from 8ca0) [ 15.624447] Using local APIC timer interrupts. [ 15.905534] result 12526370 [ 15.906186] Detected 12.526 MHz APIC timer. [ 15.907959] SMP alternatives: switching to SMP code [ 15.908065] Booting processor 1/2 APIC 0x1 [ 15.917742] Initializing CPU#1 [ 15.918901] spurious 8259A interrupt: IRQ7. [ 15.995020] Calibrating delay using timer specific routine.. 4028.46 BogoMIPS (lpj=8056926) [ 15.995026] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.995028] CPU: L2 Cache: 512K (64 bytes/line) [ 15.995031] CPU 1/1 -> Node 0 [ 15.995033] CPU: Physical Processor ID: 0 [ 15.995034] CPU: Processor Core ID: 1 [ 15.995118] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 15.998976] CPU 1: Syncing TSC to CPU 0. [ 15.999713] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 551 cycles) [ 15.999723] Brought up 2 CPUs [ 15.999734] Disabling vsyscall due to use of PM timer [ 15.999737] time.c: Using 3.579545 MHz WALL PM GTOD PM timer. [ 15.999739] time.c: Detected 2004.219 MHz processor. [ 16.218946] migration_cost=191 [ 16.219365] Time: 16:49:38 Date: 06/11/107 [ 16.219404] NET: Registered protocol family 16 [ 16.219487] ACPI: bus type pci registered [ 16.219493] PCI: Using configuration type 1 [ 16.225268] ACPI: Interpreter enabled [ 16.225271] ACPI: Using PIC for interrupt routing [ 16.225885] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.225889] PCI: Probing PCI hardware (bus 00) [ 16.228317] Boot video device is 0000:00:05.0 [ 16.229003] PCI: Transparent bridge - 0000:00:10.0 [ 16.229041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.318851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 16.321200] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.321555] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.321905] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.322258] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) [ 16.322609] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.322958] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.323400] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15) [ 16.323747] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.324101] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 *15) [ 16.324451] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.324801] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 16.325151] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.325502] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 16.325852] ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15) [ 16.326203] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.326558] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 16.326907] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) [ 16.327349] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.327700] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 16.328053] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 16.328499] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 16.328932] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 16.329367] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 16.329799] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 16.330229] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 16.330661] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 16.331183] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 16.331616] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 16.332044] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 16.332480] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 16.332912] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 16.333343] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 16.333773] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 16.334204] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 16.334634] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 16.335156] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 16.335591] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 16.336027] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 16.336458] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 16.336891] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 16.337322] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 16.338100] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.338111] pnp: PnP ACPI init [ 16.344003] pnp: PnP ACPI: found 9 devices [ 16.344076] PCI: Using ACPI for IRQ routing [ 16.344080] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.344169] NET: Registered protocol family 8 [ 16.344170] NET: Registered protocol family 20 [ 16.344955] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved [ 16.344959] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 16.344962] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 16.344965] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved [ 16.344968] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 16.344971] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 16.344974] pnp: 00:01: ioport range 0x2000-0x207f has been reserved [ 16.344977] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved [ 16.345283] PCI: Bridge: 0000:00:02.0 [ 16.345285] IO window: a000-afff [ 16.345289] MEM window: fd800000-fd8fffff [ 16.345292] PREFETCH window: fd700000-fd7fffff [ 16.345295] PCI: Bridge: 0000:00:03.0 [ 16.345297] IO window: 8000-8fff [ 16.345300] MEM window: fde00000-fdefffff [ 16.345302] PREFETCH window: fdd00000-fddfffff [ 16.345305] PCI: Bridge: 0000:00:04.0 [ 16.345307] IO window: b000-bfff [ 16.345310] MEM window: fdc00000-fdcfffff [ 16.345312] PREFETCH window: fd900000-fd9fffff [ 16.345315] PCI: Bridge: 0000:00:10.0 [ 16.345317] IO window: 9000-9fff [ 16.345321] MEM window: fdb00000-fdbfffff [ 16.345324] PREFETCH window: fda00000-fdafffff [ 16.345336] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 16.345342] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 16.345347] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 16.345354] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 16.345402] NET: Registered protocol family 2 [ 16.387013] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.387359] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 16.389232] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 16.389691] TCP: Hash tables configured (established 262144 bind 65536) [ 16.389695] TCP reno registered [ 16.399041] checking if image is initramfs... it is [ 17.004760] Freeing initrd memory: 6823k freed [ 17.008201] Simple Boot Flag at 0x3a set to 0x1 [ 17.008730] audit: initializing netlink socket (disabled) [ 17.008747] audit(1184172578.520:1): initialized [ 17.008964] VFS: Disk quotas dquot_6.5.1 [ 17.008987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.009039] io scheduler noop registered [ 17.009041] io scheduler anticipatory registered [ 17.009043] io scheduler deadline registered [ 17.009058] io scheduler cfq registered (default) [ 17.022076] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 17.022096] assign_interrupt_mode Found MSI capability [ 17.022099] Allocate Port Service[0000:00:02.0:pcie00] [ 17.022161] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 17.022180] assign_interrupt_mode Found MSI capability [ 17.022182] Allocate Port Service[0000:00:03.0:pcie00] [ 17.022239] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 17.022257] assign_interrupt_mode Found MSI capability [ 17.022260] Allocate Port Service[0000:00:04.0:pcie00] [ 17.045855] Real Time Clock Driver v1.12ac [ 17.045906] Linux agpgart interface v0.102 (c) Dave Jones [ 17.045908] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.046447] mice: PS/2 mouse device common for all mice [ 17.046977] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.047123] input: Macintosh mouse button emulation as /class/input/input0 [ 17.047156] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 17.047160] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 17.047447] PNP: No PS/2 controller found. Probing ports directly. [ 17.049826] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.049831] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.049987] TCP cubic registered [ 17.049998] NET: Registered protocol family 1 [ 17.050088] ACPI: (supports S0 S1 S3 S4 S5) [ 17.050142] Magic number: 15:316:843 [ 17.050225] hash matches device ptyu9 [ 17.050234] hash matches device ptyrc [ 17.050267] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 17.050341] Freeing unused kernel memory: 304k freed [ 18.250131] Capability LSM initialized [ 18.738924] SCSI subsystem initialized [ 18.777898] b44.c:v1.01 (Jun 16, 2006) [ 18.778257] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5 [ 18.778261] PCI: setting IRQ 5 as level-triggered [ 18.778265] ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5 [ 18.778275] PCI: Setting latency timer of device 0000:04:07.0 to 64 [ 18.781745] eth0: Broadcom 4400 10/100BaseT Ethernet 00:13:72:39:1c:83 [ 18.787327] libata version 2.20 loaded. [ 18.789160] sata_nv 0000:00:0e.0: version 3.3 [ 18.789532] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11 [ 18.789535] PCI: setting IRQ 11 as level-triggered [ 18.789539] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSID] -> GSI 11 (level, low) -> IRQ 11 [ 18.789568] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 18.789630] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 11 [ 18.789658] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 11 [ 18.789670] scsi0 : sata_nv [ 18.790188] usbcore: registered new interface driver usbfs [ 18.790211] usbcore: registered new interface driver hub [ 18.790233] usbcore: registered new device driver usb [ 18.799719] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.257639] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 19.269882] ata1.00: ata_hpa_resize 1: sectors = 488281250, hpa_sectors = 488281250 [ 19.269888] ata1.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133 [ 19.269891] ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 19.281845] ata1.00: ata_hpa_resize 1: sectors = 488281250, hpa_sectors = 488281250 [ 19.281849] ata1.00: configured for UDMA/133 [ 19.281859] scsi1 : sata_nv [ 19.752738] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.916573] ata2.00: ATAPI, max UDMA/33 [ 20.084266] ata2.00: configured for UDMA/33 [ 20.084630] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 [ 20.086233] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-3650A 105C PQ: 0 ANSI: 5 [ 20.086948] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 10 [ 20.086951] PCI: setting IRQ 10 as level-triggered [ 20.086955] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LFID] -> GSI 10 (level, low) -> IRQ 10 [ 20.086982] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 20.087025] ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001cc00 irq 10 [ 20.087053] ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001cc08 irq 10 [ 20.087066] scsi2 : sata_nv [ 20.399542] ata3: SATA link down (SStatus 0 SControl 300) [ 20.410051] ATA: abnormal status 0x7F on port 0x00000000000109e7 [ 20.410077] scsi3 : sata_nv [ 20.722954] ata4: SATA link down (SStatus 0 SControl 300) [ 20.733460] ATA: abnormal status 0x7F on port 0x0000000000010967 [ 20.737752] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 15 [ 20.737757] PCI: setting IRQ 15 as level-triggered [ 20.737761] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUBA] -> GSI 15 (level, low) -> IRQ 15 [ 20.737778] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 20.737782] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 20.737921] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 20.737941] ohci_hcd 0000:00:0b.0: irq 15, io mem 0xfe02f000 [ 20.747140] SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) [ 20.747871] sda: Write Protect is off [ 20.747874] sda: Mode Sense: 00 3a 00 00 [ 20.747897] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.747961] SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) [ 20.747970] sda: Write Protect is off [ 20.747971] sda: Mode Sense: 00 3a 00 00 [ 20.747985] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.747988] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 20.783942] sd 0:0:0:0: Attached scsi disk sda [ 20.788546] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.788567] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 20.790928] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 20.790931] Uniform CD-ROM driver Revision: 3.20 [ 20.790976] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 20.797019] usb usb1: configuration #1 chosen from 1 choice [ 20.797048] hub 1-0:1.0: USB hub found [ 20.797059] hub 1-0:1.0: 8 ports detected [ 21.058020] Attempting manual resume [ 21.058024] swsusp: Resume From Partition 8:5 [ 21.058026] PM: Checking swsusp image. [ 21.058233] PM: Resume from disk failed. [ 21.073943] EXT3-fs: INFO: recovery required on readonly filesystem. [ 21.073947] EXT3-fs: write access will be enabled during recovery. [ 21.206070] usb 1-4: new low speed USB device using ohci_hcd and address 2 [ 21.411831] usb 1-4: configuration #1 chosen from 1 choice [ 21.721112] usb 1-5: new low speed USB device using ohci_hcd and address 3 [ 21.926863] usb 1-5: configuration #1 chosen from 1 choice [ 22.236153] usb 1-7: new full speed USB device using ohci_hcd and address 4 [ 22.458940] usb 1-7: configuration #1 chosen from 1 choice [ 22.461876] usbcore: registered new interface driver hiddev [ 22.466874] input: Dell Dell USB Mouse as /class/input/input1 [ 22.466895] input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:0b.0-4 [ 22.472857] input: Dell Dell USB Keyboard as /class/input/input2 [ 22.472875] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:0b.0-5 [ 22.472896] usbcore: registered new interface driver usbhid [ 22.472900] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 22.473264] usbcore: registered new interface driver libusual [ 22.477783] Initializing USB Mass Storage driver... [ 22.477857] scsi4 : SCSI emulation for USB Mass Storage devices [ 22.477919] usbcore: registered new interface driver usb-storage [ 22.477922] USB Mass Storage support registered. [ 22.478044] usb-storage: device found at 4 [ 22.478046] usb-storage: waiting for device to settle before scanning [ 23.336901] kjournald starting. Commit interval 5 seconds [ 23.336922] EXT3-fs: sda6: orphan cleanup on readonly fs [ 23.336931] ext3_orphan_cleanup: deleting unreferenced inode 756911 [ 23.336989] ext3_orphan_cleanup: deleting unreferenced inode 760017 [ 23.360317] ext3_orphan_cleanup: deleting unreferenced inode 759870 [ 23.360333] ext3_orphan_cleanup: deleting unreferenced inode 759996 [ 23.370442] EXT3-fs: sda6: 4 orphan inodes deleted [ 23.370444] EXT3-fs: recovery complete. [ 23.384100] EXT3-fs: mounted filesystem with ordered data mode. [ 27.472517] usb-storage: device scan complete [ 27.479484] scsi 4:0:0:0: Direct-Access Memorex Mini TravelDrive 6.51 PQ: 0 ANSI: 0 CCS [ 27.486466] scsi 4:0:0:1: CD-ROM Memorex Mini TravelDrive 6.51 PQ: 0 ANSI: 0 [ 27.497449] SCSI device sdb: 1944383 512-byte hdwr sectors (996 MB) [ 27.504426] sdb: Write Protect is off [ 27.504428] sdb: Mode Sense: 45 00 00 08 [ 27.504430] sdb: assuming drive cache: write through [ 27.523391] SCSI device sdb: 1944383 512-byte hdwr sectors (996 MB) [ 27.530377] sdb: Write Protect is off [ 27.530379] sdb: Mode Sense: 45 00 00 08 [ 27.530381] sdb: assuming drive cache: write through [ 27.530385] sdb: sdb1 [ 27.544377] sd 4:0:0:0: Attached scsi removable disk sdb [ 27.544416] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 27.621211] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray [ 27.621250] sr 4:0:0:1: Attached scsi CD-ROM sr1 [ 27.621280] sr 4:0:0:1: Attached scsi generic sg3 type 5 [ 31.272142] NET: Registered protocol family 10 [ 31.272410] lo: Disabled Privacy Extensions [ 31.272469] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.407321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.412017] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.619516] input: PC Speaker as /class/input/input3 [ 32.705179] nvidia: module license 'NVIDIA' taints kernel. [ 32.960546] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 7 [ 32.960550] PCI: setting IRQ 7 as level-triggered [ 32.960554] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNK7] -> GSI 7 (level, low) -> IRQ 7 [ 32.960563] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 32.960732] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 [ 33.003118] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 33.003145] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 33.258389] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11 [ 33.258395] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 11 (level, low) -> IRQ 11 [ 33.258416] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 33.861960] fuse init (API version 7.8) [ 33.874825] b44: eth0: Link is up at 100 Mbps, full duplex. [ 33.874829] b44: eth0: Flow control is off for TX and off for RX. [ 33.877101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.930620] lp: driver loaded but no devices found [ 34.032574] Adding 506008k swap on /dev/disk/by-uuid/7bba523c-e3b8-46a5-9fd0-1efd9c610d14. Priority:-1 extents:1 across:506008k [ 34.402089] EXT3 FS on sda6, internal journal [ 35.265507] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 35.318782] NTFS volume version 3.1. [ 36.572693] NET: Registered protocol family 17