[ 0.000000] Linux version 2.6.22-10-generic (buildd@palmer) (gcc version 4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 SMP Wed Aug 22 08:11:52 GMT 2007 (Ubuntu 2.6.22-10.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f670000 (usable) [ 0.000000] BIOS-e820: 000000003f670000 - 000000003f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f71d0 [ 0.000000] Entering add_active_range(0, 0, 259696) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259696 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259696 [ 0.000000] On node 0 totalpages: 259696 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 236 pages used for memmap [ 0.000000] HighMem zone: 30084 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7120, 0024 (r2 TOSINV) [ 0.000000] ACPI: XSDT 3F67B5B0, 008C (r1 TOSINV TOSINV00 6040000 INV 0) [ 0.000000] ACPI: FACP 3F682BF8, 00F4 (r3 TOSINV TOSINV00 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 3F67D387, 57FD (r2 TOSINV CALISTGA 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 3F683FC0, 0040 [ 0.000000] ACPI: APIC 3F682CEC, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 3F682D54, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 3F682D8C, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 3F682DC8, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1) [ 0.000000] ACPI: APIC 3F682DFA, 0068 (r1 TOSINV APIC 6040000 INV 0) [ 0.000000] ACPI: SLIC 3F682E62, 0176 (r1 TOSINV TOSINV00 6040000 INV 0) [ 0.000000] ACPI: BOOT 3F682FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3F67CD38, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3F67C6A6, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3F67BBC8, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 3F67BB22, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 3F67B63C, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 257668 [ 0.000000] Kernel command line: root=UUID=ca956b9b-d695-42cf-ae8b-35b6b2e68ddc ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.111 MHz processor. [ 13.626662] Console: colour VGA+ 80x25 [ 13.626958] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 13.627303] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 13.655313] Memory: 1018044k/1038784k available (2010k kernel code, 19960k reserved, 917k data, 364k init, 121280k highmem) [ 13.655322] virtual kernel memory layout: [ 13.655323] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 13.655324] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 13.655325] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 13.655326] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 13.655328] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 13.655329] .data : 0xc02f69c6 - 0xc03dbe64 ( 917 kB) [ 13.655330] .text : 0xc0100000 - 0xc02f69c6 (2010 kB) [ 13.655333] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 13.655365] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 13.655489] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 13.655494] hpet0: 3 64-bit timers, 14318180 Hz [ 13.736469] Calibrating delay using timer specific routine.. 3994.41 BogoMIPS (lpj=7988821) [ 13.736487] Security Framework v1.0.0 initialized [ 13.736495] SELinux: Disabled at boot. [ 13.736507] Mount-cache hash table entries: 512 [ 13.736611] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 13.736619] monitor/mwait feature present. [ 13.736620] using mwait in idle threads. [ 13.736624] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.736626] CPU: L2 cache: 2048K [ 13.736629] CPU: Physical Processor ID: 0 [ 13.736630] CPU: Processor Core ID: 0 [ 13.736632] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 13.736639] Compat vDSO mapped to ffffe000. [ 13.736650] Checking 'hlt' instruction... OK. [ 13.752559] SMP alternatives: switching to UP code [ 13.752952] Early unpacking initramfs... done [ 14.048146] ACPI: Core revision 20070126 [ 14.048205] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 14.081823] CPU0: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 0c [ 14.081841] SMP alternatives: switching to SMP code [ 14.081969] Booting processor 1/1 eip 3000 [ 14.092190] Initializing CPU#1 [ 14.172220] Calibrating delay using timer specific routine.. 3990.07 BogoMIPS (lpj=7980151) [ 14.172228] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 [ 14.172232] monitor/mwait feature present. [ 14.172235] CPU: L1 I cache: 32K, L1 D cache: 32K [ 14.172237] CPU: L2 cache: 2048K [ 14.172239] CPU: Physical Processor ID: 0 [ 14.172241] CPU: Processor Core ID: 1 [ 14.172242] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 [ 14.172780] CPU1: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 0c [ 14.172803] Total of 2 processors activated (7984.48 BogoMIPS). [ 14.173000] ENABLING IO-APIC IRQs [ 14.173206] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 14.320229] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 14.340233] Brought up 2 CPUs [ 14.417722] migration_cost=56 [ 14.417854] Booting paravirtualized kernel on bare hardware [ 14.417943] Time: 22:46:53 Date: 08/08/107 [ 14.417963] NET: Registered protocol family 16 [ 14.418046] EISA bus registered [ 14.418050] ACPI: bus type pci registered [ 14.418186] PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7 [ 14.418188] PCI: Using configuration type 1 [ 14.418190] Setting up standard PCI resources [ 14.420752] ACPI: EC: Look up EC in DSDT [ 14.421511] ACPI: EC: GPE=0x16, ports=0x66, 0x62 [ 14.422769] ACPI: System BIOS is requesting _OSI(Linux) [ 14.422771] ACPI: Please test with "acpi_osi=!Linux" [ 14.422772] Please send dmidecode to linux-acpi@vger.kernel.org [ 14.423233] ACPI: Interpreter enabled [ 14.423235] ACPI: (supports S0 S3 S4 S5) [ 14.423250] ACPI: Using IOAPIC for interrupt routing [ 14.433400] ACPI: EC: GPE=0x16, ports=0x66, 0x62 [ 14.433450] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.433458] PCI: Probing PCI hardware (bus 00) [ 14.434192] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 14.434197] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 14.435331] PCI: Transparent bridge - 0000:00:1e.0 [ 14.435398] PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#07) (try 'pci=assign-busses') [ 14.435401] Please report the result to linux-kernel to fix this permanently [ 14.435465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.435752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 14.435864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 14.435976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 14.436116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 14.439292] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 14.439380] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 14.439465] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 14.439548] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 14.439632] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 14.439717] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 14.439802] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 14.439885] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 14.440029] ACPI: Power Resource [FN00] (on) [ 14.440036] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.440045] pnp: PnP ACPI init [ 14.440051] ACPI: bus type pnp registered [ 14.443795] pnp: PnP ACPI: found 10 devices [ 14.443797] ACPI: ACPI bus type pnp unregistered [ 14.443802] PnPBIOS: Disabled by ACPI PNP [ 14.443843] PCI: Using ACPI for IRQ routing [ 14.443845] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.473871] NET: Registered protocol family 8 [ 14.473873] NET: Registered protocol family 20 [ 14.473936] pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 14.473939] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 14.473942] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 14.473945] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 14.473951] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 14.476056] Time: tsc clocksource has been installed. [ 14.476070] Switched to high resolution mode on CPU 0 [ 14.476152] Switched to high resolution mode on CPU 1 [ 14.504246] PCI: Bridge: 0000:00:1c.0 [ 14.504250] IO window: 2000-2fff [ 14.504256] MEM window: f0600000-f06fffff [ 14.504261] PREFETCH window: f0000000-f01fffff [ 14.504266] PCI: Bridge: 0000:00:1c.1 [ 14.504269] IO window: 3000-3fff [ 14.504275] MEM window: f0700000-f07fffff [ 14.504280] PREFETCH window: f0200000-f03fffff [ 14.504285] PCI: Bridge: 0000:00:1c.2 [ 14.504288] IO window: 4000-4fff [ 14.504294] MEM window: f0800000-f08fffff [ 14.504299] PREFETCH window: f0400000-f05fffff [ 14.504312] PCI: Bus 8, cardbus bridge: 0000:07:06.0 [ 14.504314] IO window: 00005000-000050ff [ 14.504319] IO window: 00005400-000054ff [ 14.504324] PREFETCH window: 50000000-53ffffff [ 14.504329] MEM window: 54000000-57ffffff [ 14.504334] PCI: Bridge: 0000:00:1e.0 [ 14.504337] IO window: 5000-5fff [ 14.504343] MEM window: f0900000-f09fffff [ 14.504348] PREFETCH window: 50000000-53ffffff [ 14.504377] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 14.504384] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.504407] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 14.504413] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 14.504436] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.504442] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 14.504455] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 14.504472] PCI: Enabling device 0000:07:06.0 (0000 -> 0003) [ 14.504476] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 14.504491] NET: Registered protocol family 2 [ 14.552008] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.552068] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 14.553016] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.553389] TCP: Hash tables configured (established 131072 bind 65536) [ 14.553392] TCP reno registered [ 14.568113] checking if image is initramfs... it is [ 15.150112] Freeing initrd memory: 7124k freed [ 15.150233] Simple Boot Flag at 0x36 set to 0x1 [ 15.150708] audit: initializing netlink socket (disabled) [ 15.150724] audit(1189291613.168:1): initialized [ 15.150824] highmem bounce pool size: 64 pages [ 15.152585] VFS: Disk quotas dquot_6.5.1 [ 15.152632] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 15.152723] io scheduler noop registered [ 15.152725] io scheduler anticipatory registered [ 15.152727] io scheduler deadline registered [ 15.152740] io scheduler cfq registered (default) [ 15.152749] Boot video device is 0000:00:02.0 [ 15.152913] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 15.152969] assign_interrupt_mode Found MSI capability [ 15.153018] Allocate Port Service[0000:00:1c.0:pcie00] [ 15.153049] Allocate Port Service[0000:00:1c.0:pcie02] [ 15.153141] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 15.153197] assign_interrupt_mode Found MSI capability [ 15.153242] Allocate Port Service[0000:00:1c.1:pcie00] [ 15.153269] Allocate Port Service[0000:00:1c.1:pcie02] [ 15.153367] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 15.153423] assign_interrupt_mode Found MSI capability [ 15.153467] Allocate Port Service[0000:00:1c.2:pcie00] [ 15.153494] Allocate Port Service[0000:00:1c.2:pcie02] [ 15.153673] isapnp: Scanning for PnP cards... [ 15.507456] isapnp: No Plug & Play device found [ 15.528107] Real Time Clock Driver v1.12ac [ 15.528338] hpet_resources: 0xfed00000 is busy [ 15.528371] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.529317] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.529434] input: Macintosh mouse button emulation as /class/input/input0 [ 15.529501] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 15.531780] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.531784] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.531914] mice: PS/2 mouse device common for all mice [ 15.532011] EISA: Probing bus 0 at eisa.0 [ 15.532021] Cannot allocate resource for EISA slot 1 [ 15.532024] Cannot allocate resource for EISA slot 2 [ 15.532026] Cannot allocate resource for EISA slot 3 [ 15.532029] Cannot allocate resource for EISA slot 4 [ 15.532031] Cannot allocate resource for EISA slot 5 [ 15.532045] EISA: Detected 0 cards. [ 15.532223] TCP cubic registered [ 15.532238] NET: Registered protocol family 1 [ 15.532257] Using IPI No-Shortcut mode [ 15.532412] Magic number: 7:190:805 [ 15.532744] Freeing unused kernel memory: 364k freed [ 15.571710] input: AT Translated Set 2 keyboard as /class/input/input1 [ 16.713297] AppArmor: AppArmor initialized [ 16.713304] audit(1189291614.668:2): AppArmor initialized [ 16.713305] [ 16.720480] fuse init (API version 7.8) [ 16.725311] AppArmor: Registered secondary security module: capability. [ 16.725314] Capability LSM initialized as secondary [ 16.728503] ACPI: Fan [FAN0] (on) [ 16.732589] ACPI: SSDT 3F67C36E, 027D (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 16.732776] ACPI: SSDT 3F67BE27, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 16.733259] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 16.733263] ACPI: Processor [CPU0] (supports 8 throttling states) [ 16.733471] ACPI: SSDT 3F67C5EB, 00BB (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 16.733644] ACPI: SSDT 3F67C2E9, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 16.734140] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 16.734144] ACPI: Processor [CPU1] (supports 8 throttling states) [ 16.737767] ACPI: Thermal Zone [TZ00] (54 C) [ 16.738437] ACPI: Invalid passive threshold [ 16.738800] ACPI: Thermal Zone [TZ01] (50 C) [ 2.932000] Marking TSC unstable due to: possible TSC halt in C2. [ 2.936000] Time: hpet clocksource has been installed. [ 3.340000] usbcore: registered new interface driver usbfs [ 3.340000] usbcore: registered new interface driver hub [ 3.340000] usbcore: registered new device driver usb [ 3.340000] USB Universal Host Controller Interface driver v3.0 [ 3.340000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.340000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.340000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.340000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.340000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 [ 3.340000] usb usb1: configuration #1 chosen from 1 choice [ 3.340000] hub 1-0:1.0: USB hub found [ 3.340000] hub 1-0:1.0: 2 ports detected [ 3.344000] SCSI subsystem initialized [ 3.348000] libata version 2.21 loaded. [ 3.444000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 3.444000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.444000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.444000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.444000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 3.444000] usb usb2: configuration #1 chosen from 1 choice [ 3.444000] hub 2-0:1.0: USB hub found [ 3.444000] hub 2-0:1.0: 2 ports detected [ 3.548000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.548000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.548000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.548000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.548000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 3.548000] usb usb3: configuration #1 chosen from 1 choice [ 3.548000] hub 3-0:1.0: USB hub found [ 3.548000] hub 3-0:1.0: 2 ports detected [ 3.652000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 3.652000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.652000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.652000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.652000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 [ 3.652000] usb usb4: configuration #1 chosen from 1 choice [ 3.652000] hub 4-0:1.0: USB hub found [ 3.652000] hub 4-0:1.0: 2 ports detected [ 3.756000] ata_piix 0000:00:1f.2: version 2.11 [ 3.756000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.792000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 3.912000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 3.912000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.912000] scsi0 : ata_piix [ 3.912000] scsi1 : ata_piix [ 3.912000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 [ 3.912000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 [ 3.960000] usb 2-1: configuration #1 chosen from 1 choice [ 4.076000] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7DP, max UDMA/100 [ 4.076000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.092000] ata1.00: configured for UDMA/100 [ 4.204000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 4.380000] usb 3-2: configuration #1 chosen from 1 choice [ 4.384000] usbcore: registered new interface driver hiddev [ 4.400000] input: USB OpticalWheel Mouse as /class/input/input2 [ 4.400000] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:1d.1-1 [ 4.400000] usbcore: registered new interface driver usbhid [ 4.400000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 4.412000] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.20, max UDMA/33 [ 4.584000] ata2.00: configured for UDMA/33 [ 4.584000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 [ 4.584000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.20 PQ: 0 ANSI: 5 [ 4.588000] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 16 [ 4.636000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0905000-f09057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.636000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 4.636000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.636000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.636000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.636000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.636000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.636000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0d44000 [ 4.640000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.640000] usb usb5: configuration #1 chosen from 1 choice [ 4.640000] hub 5-0:1.0: USB hub found [ 4.640000] hub 5-0:1.0: 8 ports detected [ 4.648000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 4.648000] sd 0:0:0:0: [sda] Write Protect is off [ 4.648000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.648000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.648000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 4.648000] sd 0:0:0:0: [sda] Write Protect is off [ 4.648000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.648000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.648000] sda:<6>usb 3-2: USB disconnect, address 2 [ 4.664000] sda1 sda2 sda3 sda4 [ 4.664000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.668000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.668000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.676000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.676000] Uniform CD-ROM driver Revision: 3.20 [ 4.676000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.040000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.040000] EXT3-fs: write access will be enabled during recovery. [ 5.452000] usb 5-8: new high speed USB device using ehci_hcd and address 4 [ 5.596000] usb 5-8: configuration #1 chosen from 1 choice [ 5.728000] usb 2-1: USB disconnect, address 2 [ 5.908000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d173c493] [ 5.968000] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 6.136000] usb 2-1: configuration #1 chosen from 1 choice [ 6.156000] input: USB OpticalWheel Mouse as /class/input/input3 [ 6.156000] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:1d.1-1 [ 6.400000] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 6.576000] usb 3-2: configuration #1 chosen from 1 choice [ 8.680000] kjournald starting. Commit interval 5 seconds [ 8.680000] EXT3-fs: sda4: orphan cleanup on readonly fs [ 8.680000] ext3_orphan_cleanup: deleting unreferenced inode 983057 [ 8.708000] ext3_orphan_cleanup: deleting unreferenced inode 986331 [ 8.708000] ext3_orphan_cleanup: deleting unreferenced inode 986332 [ 8.708000] ext3_orphan_cleanup: deleting unreferenced inode 986340 [ 8.712000] ext3_orphan_cleanup: deleting unreferenced inode 983061 [ 8.724000] EXT3-fs: sda4: 5 orphan inodes deleted [ 8.724000] EXT3-fs: recovery complete. [ 8.728000] EXT3-fs: mounted filesystem with ordered data mode. [ 19.836000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.860000] Netfilter messages via NETLINK v0.30. [ 19.864000] nf_conntrack version 0.5.0 (8115 buckets, 64920 max) [ 21.212000] Linux agpgart interface v0.102 (c) Dave Jones [ 21.228000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.252000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.308000] agpgart: Detected an Intel 945GM Chipset. [ 21.312000] agpgart: Detected 7932K stolen memory. [ 21.328000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 21.576000] ieee80211_crypt: registered algorithm 'NULL' [ 21.592000] iTCO_vendor_support: vendor-support=0 [ 21.776000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 21.776000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 21.900000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 21.900000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 21.900000] sky2 0000:02:00.0: v1.14 addr 0xf0600000 irq 17 Yukon-FE (0xb7) rev 3 [ 21.900000] sky2 eth0: addr 00:a0:d1:73:c4:93 [ 21.916000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 21.916000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 21.916000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 21.988000] Linux video capture interface: v2.00 [ 22.048000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp [ 22.048000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 22.060000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 22.060000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 22.064000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 22.076000] sky2 eth0: enabling interface [ 22.080000] sky2 eth0: ram buffer 4K [ 22.092000] intel_rng: FWH not detected [ 22.244000] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 22.316000] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10] [ 22.316000] Yenta: Enabling burst memory read transactions [ 22.316000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 22.316000] Yenta: Routing CardBus interrupts to PCI [ 22.316000] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66 [ 22.356000] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 22.356000] usbcore: registered new interface driver uvcvideo [ 22.356000] USB Video Class driver (v0.1.0) [ 22.376000] sdhci: Secure Digital Host Controller Interface driver [ 22.376000] sdhci: Copyright(c) Pierre Ossman [ 22.548000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 [ 22.548000] Socket status: 30000006 [ 22.548000] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b [ 22.548000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 22.548000] cs: IO port probe 0x5000-0x5fff: clean. [ 22.548000] pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff [ 22.548000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 22.548000] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0) [ 22.548000] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18 [ 22.548000] mmc0: SDHCI at 0xf0905800 irq 18 DMA [ 22.556000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 22.556000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 22.600000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000 [ 22.600000] synaptics: Toshiba Satellite A200 detected, limiting rate to 40pps. [ 22.632000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 22.904000] cs: IO port probe 0x100-0x3af: clean. [ 22.904000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 22.904000] cs: IO port probe 0x820-0x8ff: clean. [ 22.908000] cs: IO port probe 0xc00-0xcf7: clean. [ 22.908000] cs: IO port probe 0xa00-0xaff: clean. [ 23.332000] NET: Registered protocol family 17 [ 23.984000] si3054: cannot initialize. EXT MID = 0000 [ 24.236000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 24.340000] lp: driver loaded but no devices found [ 24.344000] sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none [ 24.916000] EXT3 FS on sda4, internal journal [ 25.728000] AppArmor: Unregistered secondary security module: capability [ 26.732000] NET: Registered protocol family 10 [ 26.732000] lo: Disabled Privacy Extensions [ 26.732000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 30.092000] ACPI: Battery Slot [BAT0] (battery absent) [ 30.276000] No dock devices found. [ 30.340000] set_level status: 0 [ 30.340000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 30.344000] set_level status: 0 [ 30.344000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 30.376000] input: Power Button (FF) as /class/input/input5 [ 30.376000] ACPI: Power Button (FF) [PWRF] [ 30.380000] input: Lid Switch as /class/input/input6 [ 30.380000] ACPI: Lid Switch [LID] [ 30.396000] input: Power Button (CM) as /class/input/input7 [ 30.396000] ACPI: Power Button (CM) [PWRB] [ 30.472000] ACPI: AC Adapter [ADP0] (on-line) [ 34.268000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 34.668000] [drm] Initialized drm 1.1.0 20060810 [ 34.668000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 34.672000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 35.200000] ppdev: user-space parallel port driver [ 35.652000] audit(1189255648.412:3): REJECTING m access to /etc/passwd (cupsd(5929) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 35.652000] audit(1189255648.412:4): REJECTING m access to /etc/group (cupsd(5929) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 35.656000] audit(1189255648.412:5): REJECTING m access to /etc/group (cupsd(5929) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 35.824000] audit(1189255648.412:6): REJECTING w access to /dev/tty (cupsd(5929) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 35.988000] apm: BIOS not found. [ 36.488000] AppArmor: Registered secondary security module: capability. [ 36.488000] Capability LSM initialized as secondary [ 36.760000] Bluetooth: Core ver 2.11 [ 36.760000] NET: Registered protocol family 31 [ 36.760000] Bluetooth: HCI device and connection manager initialized [ 36.760000] Bluetooth: HCI socket layer initialized [ 36.776000] Bluetooth: L2CAP ver 2.8 [ 36.776000] Bluetooth: L2CAP socket layer initialized [ 36.932000] Bluetooth: RFCOMM socket layer initialized [ 36.932000] Bluetooth: RFCOMM TTY layer initialized [ 36.932000] Bluetooth: RFCOMM ver 1.8 [ 37.376000] eth0: no IPv6 routers present [ 39.552000] Unknown OutputIN= OUT=eth1 SRC=192.168.0.101 DST=192.168.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=424 DF PROTO=UDP SPT=32769 DPT=53 LEN=40 [ 39.552000] Unknown OutputIN= OUT=eth1 SRC=192.168.0.101 DST=192.168.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=424 DF PROTO=UDP SPT=32769 DPT=53 LEN=40 [ 39.552000] Unknown OutputIN= OUT=eth1 SRC=192.168.0.101 DST=192.168.0.1 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=424 DF PROTO=UDP SPT=32769 DPT=53 LEN=55 [ 39.552000] Unknown OutputIN= OUT=eth1 SRC=192.168.0.101 DST=192.168.0.1 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=424 DF PROTO=UDP SPT=32769 DPT=53 LEN=55 [ 39.552000] Unknown OutputIN= OUT=eth1 SRC=192.168.0.101 DST=192.168.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=424 DF PROTO=UDP SPT=32769 DPT=53 LEN=40 [ 39.552000] Unknown OutputIN= OUT=eth1 SRC=192.168.0.101 DST=192.168.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=424 DF PROTO=UDP SPT=32769 DPT=53 LEN=40 [ 39.552000] Unknown OutputIN= OUT=eth1 SRC=192.168.0.101 DST=192.168.0.1 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=424 DF PROTO=UDP SPT=32769 DPT=53 LEN=55 [ 39.556000] Unknown OutputIN= OUT=eth1 SRC=192.168.0.101 DST=192.168.0.1 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=425 DF PROTO=UDP SPT=32769 DPT=53 LEN=55 [ 44.820000] eth1: no IPv6 routers present [ 61.028000] set_level status: 0 [ 61.044000] set_level status: 0 [ 61.060000] set_level status: 0 [ 61.072000] set_level status: 0 [ 61.088000] set_level status: 0 [ 61.100000] set_level status: 0 [ 61.112000] set_level status: 0 [ 61.124000] set_level status: 0 [ 61.140000] set_level status: 0 [ 61.156000] set_level status: 0 [ 61.168000] set_level status: 0 [ 61.184000] set_level status: 0 [ 61.196000] set_level status: 0 [ 61.208000] set_level status: 0 [ 61.224000] set_level status: 0 [ 61.236000] set_level status: 0 [ 61.248000] set_level status: 0 [ 61.260000] set_level status: 0 [ 61.276000] set_level status: 0 [ 61.288000] set_level status: 0 [ 61.304000] set_level status: 0