No harddisks after resume from sleep with ata_piix

[Kai-Uwe Widany]

Binary package hint: linux-image-2.6.20-16-generic

On a Samsung X20 Notebook (ICH6M, see lspci below), my harddisks are not mouted after resuming from standby (S3). The Desktop comes back but you can't do anything because no commands are found. I was able to have a successful first resume, but after a following resume from standby the error occurred.

This seems to be the case when the kernel uses the "ata_piix" module instead of "piix". With the "piix" module i have not found this error and standby/resume works fine even after several standby/resume cycles. Kernel version is 2.6.20-16.29.

I was able to note some parts of the syslog when I opened the syslog-viewer before going to standby:

ata1.00: n_sectors mismatch 156368016 != 155306477
ata1.00: limiting speed to UDMA/33:PIO3
ata1: failed to recover some devices, retrying in 5 secs

If I switch to a console there are several lines like this:

scsi 0:0:0:0: rejectiong I/O to dead device
EXT3-fs error (device sda2): ext3_find_entry: reading directory #2513008 offset 0

On a clean boot, the syslog part from ata looks like:

Jun 11 09:02:30 localhost kernel: [ 6.016000] ata1.00: ata_hpa_resize 1: sectors = 155306477, hpa_sectors = 156368016
Jun 11 09:02:30 localhost kernel: [ 6.016000] ata1.00: Host Protected Area detected.
Jun 11 09:02:30 localhost kernel: [ 6.016000] current size : 155306477 sectors (79516 MB)
Jun 11 09:02:30 localhost kernel: [ 6.016000] native size : 156368016 sectors (80060 MB)
Jun 11 09:02:30 localhost kernel: [ 6.528000] ata1.00: SET of native returned 0, expected 156368016
Jun 11 09:02:30 localhost kernel: [ 6.528000] ata1.00: ATA-7: SAMSUNG MP0804H, UE100-11, max UDMA/100
Jun 11 09:02:30 localhost kernel: [ 6.528000] ata1.00: 155306477 sectors, multi 16: LBA48
Jun 11 09:02:30 localhost kernel: [ 6.528000] ata1.01: ATAPI, max UDMA/33
Jun 11 09:02:30 localhost kernel: [ 6.536000] ata1.00: ata_hpa_resize 1: sectors = 155306477, hpa_sectors = 156368016
Jun 11 09:02:30 localhost kernel: [ 6.536000] ata1.00: Host Protected Area detected.
Jun 11 09:02:30 localhost kernel: [ 6.536000] current size : 155306477 sectors (79516 MB)
Jun 11 09:02:30 localhost kernel: [ 6.536000] native size : 156368016 sectors (80060 MB)
Jun 11 09:02:30 localhost kernel: [ 6.584000] ata1.00: SET of native returned 0, expected 156368016
Jun 11 09:02:30 localhost kernel: [ 6.584000] ata1.00: configured for UDMA/100
Jun 11 09:02:30 localhost kernel: [ 6.796000] ata1.01: configured for UDMA/33
Jun 11 09:02:30 localhost kernel: [ 6.796000] scsi1 : ata_piix
Jun 11 09:02:30 localhost kernel: [ 6.796000] ata2: port disabled. ignoring.
Jun 11 09:02:30 localhost kernel: [ 6.796000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0804H UE10 PQ: 0 ANSI: 5
Jun 11 09:02:30 localhost kernel: [ 6.840000] scsi 0:0:1:0: CD-ROM TEAC DV-W28E S.0A PQ: 0 ANSI: 5
Jun 11 09:02:30 localhost kernel: [ 6.868000] SCSI device sda: 155306477 512-byte hdwr sectors (79517 MB)
Jun 11 09:02:30 localhost kernel: [ 6.868000] sda: Write Protect is off
Jun 11 09:02:30 localhost kernel: [ 6.868000] sda: Mode Sense: 00 3a 00 00
Jun 11 09:02:30 localhost kernel: [ 6.868000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 11 09:02:30 localhost kernel: [ 6.868000] SCSI device sda: 155306477 512-byte hdwr sectors (79517 MB)
Jun 11 09:02:30 localhost kernel: [ 6.868000] sda: Write Protect is off
Jun 11 09:02:30 localhost kernel: [ 6.868000] sda: Mode Sense: 00 3a 00 00
Jun 11 09:02:30 localhost kernel: [ 6.868000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 11 09:02:30 localhost kernel: [ 6.868000] sda: sda1 sda2 sda3 sda4
Jun 11 09:02:30 localhost kernel: [ 6.900000] sd 0:0:0:0: Attached scsi disk sda
Jun 11 09:02:30 localhost kernel: [ 6.908000] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 11 09:02:30 localhost kernel: [ 6.908000] scsi 0:0:1:0: Attached scsi generic sg1 type 5
Jun 11 09:02:30 localhost kernel: [ 7.276000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 11 09:02:30 localhost kernel: [ 7.276000] Uniform CD-ROM driver Revision: 3.20
Jun 11 09:02:30 localhost kernel: [ 7.276000] sr 0:0:1:0: Attached scsi CD-ROM sr0

lspci:

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 21)
02:05.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
02:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
02:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
02:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
02:09.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)

lsmod:

Module Size Used by
speedstep_centrino 12256 0
arc4 2944 2
ecb 4480 2
blkcipher 6784 1 ecb
ieee80211_crypt_wep 6144 1
binfmt_misc 12680 1
vmnet 39076 13
vmmon 113836 0
pktcdvd 35676 1
i915 24448 2
drm 81044 3 i915
cpufreq_userspace 5408 0
cpufreq_stats 7360 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9228 1
freq_table 5792 3 speedstep_centrino,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 8200 0
dev_acpi 12292 0
sbs 15652 0
backlight 7040 0
i2c_ec 6016 1 sbs
i2c_core 22656 1 i2c_ec
dock 10268 0
button 8720 0
battery 10756 0
container 5248 0
ac 6020 0
nls_utf8 3072 1
ntfs 107764 1
af_packet 23816 4
fuse 46612 1
sbp2 23812 0
snd_intel8x0 34332 1
snd_ac97_codec 98464 1 snd_intel8x0
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44544 0
snd_mixer_oss 17408 1 snd_pcm_oss
snd_pcm 79876 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 32896 0
pcmcia 39212 0
snd_seq_midi 9600 0
snd_rawmidi 25472 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 23684 2 snd_pcm,snd_seq
snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
joydev 10816 0
ipw2200 148040 0
sdhci 18700 0
mmc_core 26756 1 sdhci
yenta_socket 27532 1
rsrc_nonstatic 14080 1 yenta_socket
pcmcia_core 40852 3 pcmcia,yenta_socket,rsrc_nonstatic
ieee80211 34760 1 ipw2200
ieee80211_crypt 7040 2 ieee80211_crypt_wep,ieee80211
snd 54020 12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8672 1 snd
snd_page_alloc 10888 2 snd_intel8x0,snd_pcm
parport_pc 36388 0
parport 36936 1 parport_pc
intel_agp 25244 1
agpgart 35400 3 drm,intel_agp
shpchp 34324 0
pci_hotplug 32576 1 shpchp
evdev 11008 7
serio_raw 7940 0
psmouse 38920 0
ipv6 268960 8
ext3 133128 2
jbd 59816 1 ext3
mbcache 9604 1 ext3
sg 36252 0
sr_mod 17060 1
cdrom 37664 2 pktcdvd,sr_mod
sd_mod 23428 5
usbhid 26592 0
hid 27392 1 usbhid
ata_piix 15492 6
ata_generic 9092 0
libata 125720 2 ata_piix,ata_generic
scsi_mod 142348 5 sbp2,sg,sr_mod,sd_mod,libata
ohci1394 36528 0
ieee1394 299448 2 sbp2,ohci1394
generic 5124 0 [permanent]
b44 28044 0
mii 6528 1 b44
tg3 109700 0
ehci_hcd 34188 0
uhci_hcd 25360 0
usbcore 134280 4 usbhid,ehci_hcd,uhci_hcd
thermal 14856 0
processor 31048 1 thermal
fan 5636 0
fbcon 42656 0
tileblit 3584 1 fbcon
font 9216 1 fbcon
bitblit 6912 1 fbcon
softcursor 3200 1 bitblit
vesafb 9220 0
capability 5896 0
commoncap 8192 1 capability

[Launchpad Janitor (janitor)]

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this bug to the new "linux" package. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!