[ 0.000000] Linux version 2.6.20-16-generic (root@king) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 19:00:28 UTC 2007 (Ubuntu 2.6.20-16.29-generic) [ 0.000000] Command line: root=UUID=4b04f5bd-64f8-4260-871e-3893dc0e0074 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524016) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v002 Nvidia ) @ 0x00000000000f7570 [ 0.000000] ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef30c0 [ 0.000000] ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fefb440 [ 0.000000] ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x000000007fefb640 [ 0.000000] ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fefb6c0 [ 0.000000] ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fefb580 [ 0.000000] ACPI: DSDT (v001 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524016) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524016 [ 0.000000] On node 0 totalpages: 523919 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1087 pages reserved [ 0.000000] DMA zone: 2856 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512812 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515668 [ 0.000000] Kernel command line: root=UUID=4b04f5bd-64f8-4260-871e-3893dc0e0074 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 26.981804] Console: colour VGA+ 80x25 [ 26.982797] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 26.984213] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 26.984694] Checking aperture... [ 26.984698] CPU 0: aperture @ c440000000 size 32 MB [ 26.984700] Aperture too small (32 MB) [ 26.991335] No AGP bridge found [ 27.008140] Memory: 2052604k/2096064k available (2217k kernel code, 43072k reserved, 1162k data, 304k init) [ 27.085222] Calibrating delay using timer specific routine.. 4615.32 BogoMIPS (lpj=9230646) [ 27.085273] Security Framework v1.0.0 initialized [ 27.085277] SELinux: Disabled at boot. [ 27.085299] Mount-cache hash table entries: 256 [ 27.085426] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 27.085429] CPU: L2 Cache: 512K (64 bytes/line) [ 27.085431] CPU 0/0 -> Node 0 [ 27.085433] CPU: Physical Processor ID: 0 [ 27.085434] CPU: Processor Core ID: 0 [ 27.085455] SMP alternatives: switching to UP code [ 27.085709] Early unpacking initramfs... done [ 27.342349] ACPI: Core revision 20060707 [ 27.345619] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 27.390718] Using local APIC timer interrupts. [ 27.434080] result 12526129 [ 27.434082] Detected 12.526 MHz APIC timer. [ 27.437180] SMP alternatives: switching to SMP code [ 27.437314] Booting processor 1/2 APIC 0x1 [ 27.446546] Initializing CPU#1 [ 27.523885] Calibrating delay using timer specific routine.. 4609.65 BogoMIPS (lpj=9219312) [ 27.523891] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 27.523893] CPU: L2 Cache: 512K (64 bytes/line) [ 27.523895] CPU 1/1 -> Node 0 [ 27.523897] CPU: Physical Processor ID: 0 [ 27.523898] CPU: Processor Core ID: 1 [ 27.523987] AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 [ 27.527880] CPU 1: Syncing TSC to CPU 0. [ 27.529020] CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 595 cycles) [ 27.529029] Brought up 2 CPUs [ 27.529115] time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer. [ 27.529117] time.c: Detected 2304.805 MHz processor. [ 27.583958] migration_cost=174 [ 27.584265] Time: 14:47:35 Date: 05/10/107 [ 27.584299] NET: Registered protocol family 16 [ 27.584375] ACPI: bus type pci registered [ 27.584380] PCI: Using configuration type 1 [ 27.593270] ACPI: Interpreter enabled [ 27.593273] ACPI: Using IOAPIC for interrupt routing [ 27.593861] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.593866] PCI: Probing PCI hardware (bus 00) [ 27.596545] Boot video device is 0000:03:00.0 [ 27.596669] PCI: Transparent bridge - 0000:00:10.0 [ 27.596704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.732539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 27.734834] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.735183] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.735534] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.735882] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) [ 27.736234] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) [ 27.736585] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.736943] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.737292] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.737642] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 27.737990] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.738340] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) [ 27.738689] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.739045] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 27.739392] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.739742] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.740091] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 27.740441] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 27.740801] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.741154] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 27.741505] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) [ 27.741943] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 27.742362] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 27.742782] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 27.743200] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 27.743619] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 27.744037] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 27.744461] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 27.744888] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 27.745308] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 27.745727] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 27.746146] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 27.746567] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 27.746988] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 27.747412] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 27.747833] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 27.748253] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 27.748674] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 27.749103] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 27.749524] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 27.749946] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 27.750369] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 27.755001] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.755011] pnp: PnP ACPI init [ 27.764087] pnp: PnP ACPI: found 18 devices [ 27.764159] PCI: Using ACPI for IRQ routing [ 27.764163] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.764253] NET: Registered protocol family 8 [ 27.764255] NET: Registered protocol family 20 [ 27.764270] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 27.764273] hpet0: 3 32-bit timers, 25000000 Hz [ 27.765798] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved [ 27.765801] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved [ 27.765803] pnp: 00:01: ioport range 0x4400-0x447f has been reserved [ 27.765806] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved [ 27.765808] pnp: 00:01: ioport range 0x4800-0x487f has been reserved [ 27.765811] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved [ 27.765813] pnp: 00:01: ioport range 0x2000-0x207f has been reserved [ 27.765816] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved [ 27.766101] PCI: Bridge: 0000:00:02.0 [ 27.766103] IO window: a000-afff [ 27.766107] MEM window: fdd00000-fddfffff [ 27.766109] PREFETCH window: fda00000-fdafffff [ 27.766112] PCI: Bridge: 0000:00:03.0 [ 27.766113] IO window: 8000-8fff [ 27.766116] MEM window: fd900000-fd9fffff [ 27.766118] PREFETCH window: fde00000-fdefffff [ 27.766120] PCI: Bridge: 0000:00:04.0 [ 27.766122] IO window: b000-bfff [ 27.766125] MEM window: fa000000-fcffffff [ 27.766127] PREFETCH window: d0000000-dfffffff [ 27.766130] PCI: Bridge: 0000:00:10.0 [ 27.766131] IO window: 9000-9fff [ 27.766135] MEM window: fdc00000-fdcfffff [ 27.766137] PREFETCH window: fdb00000-fdbfffff [ 27.766148] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 27.766153] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 27.766158] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 27.766164] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 27.766210] NET: Registered protocol family 2 [ 27.816806] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 27.817164] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 27.819149] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 27.819633] TCP: Hash tables configured (established 262144 bind 65536) [ 27.819636] TCP reno registered [ 27.832848] checking if image is initramfs... it is [ 28.356155] Freeing initrd memory: 6811k freed [ 28.360379] audit: initializing netlink socket (disabled) [ 28.360396] audit(1181486855.348:1): initialized [ 28.360595] VFS: Disk quotas dquot_6.5.1 [ 28.360616] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 28.360665] io scheduler noop registered [ 28.360667] io scheduler anticipatory registered [ 28.360668] io scheduler deadline registered [ 28.360681] io scheduler cfq registered (default) [ 28.380567] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 28.380585] assign_interrupt_mode Found MSI capability [ 28.380588] Allocate Port Service[0000:00:02.0:pcie00] [ 28.380645] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 28.380662] assign_interrupt_mode Found MSI capability [ 28.380664] Allocate Port Service[0000:00:03.0:pcie00] [ 28.380718] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 28.380734] assign_interrupt_mode Found MSI capability [ 28.380736] Allocate Port Service[0000:00:04.0:pcie00] [ 28.403128] Real Time Clock Driver v1.12ac [ 28.403307] hpet_resources: 0xfefff000 is busy [ 28.403318] Linux agpgart interface v0.102 (c) Dave Jones [ 28.403320] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.403447] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.403644] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 28.404097] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.404316] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 28.404555] mice: PS/2 mouse device common for all mice [ 28.405029] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.405237] input: Macintosh mouse button emulation as /class/input/input0 [ 28.405264] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 28.405268] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 28.405454] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 28.406282] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.406289] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 28.406376] TCP cubic registered [ 28.406385] NET: Registered protocol family 1 [ 28.406486] ACPI: (supports S0 S1 S3 S4 S5) [ 28.406533] Magic number: 11:470:788 [ 28.406645] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 28.406714] Freeing unused kernel memory: 304k freed [ 28.425107] input: AT Translated Set 2 keyboard as /class/input/input1 [ 29.573591] Capability LSM initialized [ 29.602792] ACPI: Fan [FAN] (on) [ 29.606911] ACPI: Thermal Zone [THRM] (40 C) [ 30.035623] SCSI subsystem initialized [ 30.061605] libata version 2.20 loaded. [ 30.070114] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 30.070135] NFORCE-MCP51: chipset revision 161 [ 30.070137] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 30.070143] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 30.070152] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA [ 30.070160] ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA [ 30.070167] Probing IDE interface ide0... [ 30.079230] ieee1394: Initialized config rom entry `ip1394' [ 30.090392] usbcore: registered new interface driver usbfs [ 30.090415] usbcore: registered new interface driver hub [ 30.090435] usbcore: registered new device driver usb [ 30.091177] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 30.105404] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 30.108020] Floppy drive(s): fd0 is 1.44M [ 30.138279] FDC 0 is a post-1991 82077 [ 30.646843] Probing IDE interface ide1... [ 31.219047] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 31.219059] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 31.219994] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 31.220006] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 31.220023] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 31.220026] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 31.220275] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 31.220294] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 [ 31.269280] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdcff000-fdcff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 31.280946] usb usb1: configuration #1 chosen from 1 choice [ 31.281115] hub 1-0:1.0: USB hub found [ 31.281126] hub 1-0:1.0: 8 ports detected [ 31.388057] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 31.388069] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 31.388087] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 31.388090] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 31.388127] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 31.388160] ehci_hcd 0000:00:0b.1: debug port 1 [ 31.388164] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 31.388176] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000 [ 31.388183] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 31.388265] usb usb2: configuration #1 chosen from 1 choice [ 31.388288] hub 2-0:1.0: USB hub found [ 31.388295] hub 2-0:1.0: 8 ports detected [ 31.495017] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 31.495028] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 31.495034] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 31.495042] forcedeth: using HIGHDMA [ 32.018367] eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0 [ 32.018497] sata_nv 0000:00:0e.0: version 3.3 [ 32.019336] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 32.019347] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 32.019373] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 32.019434] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 20 [ 32.019461] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 20 [ 32.019474] scsi0 : sata_nv [ 32.353713] usb 1-3: new low speed USB device using ohci_hcd and address 2 [ 32.493641] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.541298] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 [ 32.541305] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 32.541308] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 32.545776] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800011e0b86] [ 32.598686] usb 1-3: configuration #1 chosen from 1 choice [ 32.608069] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 [ 32.608076] ata1.00: configured for UDMA/133 [ 32.608067] scsi1 : sata_nv [ 32.909369] usb 1-4: new low speed USB device using ohci_hcd and address 3 [ 33.081253] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.146319] usb 1-4: configuration #1 chosen from 1 choice [ 33.149359] usbcore: registered new interface driver hiddev [ 33.253273] ata2.00: ATAPI, max UDMA/66 [ 33.384128] hiddev96: USB HID v1.10 Device [APC Back-UPS ES 550 FW:840.B2.D USB FW:B2] on usb-0000:00:0b.0-3 [ 33.394169] input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input2 [ 33.394180] input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:0b.0-4 [ 33.411151] input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input3 [ 33.411157] input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:0b.0-4 [ 33.411167] usbcore: registered new interface driver usbhid [ 33.411170] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 33.425197] ata2.00: configured for UDMA/66 [ 33.425276] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 33.431789] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.09 PQ: 0 ANSI: 5 [ 33.432661] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 33.432664] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 33.432691] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 33.432737] ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001cc00 irq 23 [ 33.432768] ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001cc08 irq 23 [ 33.432777] scsi2 : sata_nv [ 33.744792] ata3: SATA link down (SStatus 0 SControl 300) [ 33.755257] ATA: abnormal status 0x7F on port 0x00000000000109e7 [ 33.755297] scsi3 : sata_nv [ 34.068577] ata4: SATA link down (SStatus 0 SControl 300) [ 34.079043] ATA: abnormal status 0x7F on port 0x0000000000010967 [ 34.093870] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [ 34.095474] sda: Write Protect is off [ 34.095477] sda: Mode Sense: 00 3a 00 00 [ 34.095506] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.095557] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [ 34.095565] sda: Write Protect is off [ 34.095566] sda: Mode Sense: 00 3a 00 00 [ 34.095578] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.095585] sda: sda1 sda2 < sda5 > [ 34.136818] sd 0:0:0:0: Attached scsi disk sda [ 34.140078] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 34.140101] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 34.149285] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 34.149290] Uniform CD-ROM driver Revision: 3.20 [ 34.149346] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 34.266084] Attempting manual resume [ 34.266087] swsusp: Resume From Partition 8:5 [ 34.266089] PM: Checking swsusp image. [ 34.266276] PM: Resume from disk failed. [ 34.300462] kjournald starting. Commit interval 5 seconds [ 34.300496] EXT3-fs: mounted filesystem with ordered data mode. [ 44.412957] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 44.415033] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.789158] nvidia: module license 'NVIDIA' taints kernel. [ 45.044454] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 45.044466] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16 [ 45.044474] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 45.044635] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 [ 45.174309] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 45.174337] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 45.181322] input: PC Speaker as /class/input/input4 [ 45.378935] parport: PnPBIOS parport detected. [ 45.378964] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 45.400657] usbcore: registered new interface driver xpad [ 45.400662] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6 [ 45.413900] input: ImExPS/2 Generic Explorer Mouse as /class/input/input5 [ 45.659135] NET: Registered protocol family 10 [ 45.659225] lo: Disabled Privacy Extensions [ 45.818244] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 45.818248] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 45.818267] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 46.227888] fuse init (API version 7.8) [ 46.260582] lp0: using parport0 (interrupt-driven). [ 46.624086] it87: Found IT8716F chip at 0x290, revision 1 [ 46.624097] it87: in3 is VCC (+5V) [ 46.624098] it87: in7 is VCCH (+5V Stand-By) [ 46.624160] it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface [ 46.652789] Adding 6032368k swap on /dev/disk/by-uuid/ac582bef-16be-44ab-8ce3-82b6ebffd263. Priority:-1 extents:1 across:6032368k [ 46.794291] EXT3 FS on sda1, internal journal [ 48.178542] NET: Registered protocol family 17