[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 (Ubuntu 2.6.24-18.32-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f687000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f687000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f81e0 [ 0.000000] Entering add_active_range(0, 0, 521856) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521856 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521856 [ 0.000000] On node 0 totalpages: 521856 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290195 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F8150 checksum 0 [ 0.000000] ACPI: RSDP 000F8150, 0014 (r0 Compal) [ 0.000000] ACPI: RSDT 7F680FA8, 004C (r1 Compal CALISTGA 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F686C78, 0074 (r1 Compal CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: DSDT 7F681FE6, 4C92 (r1 Compal CALISTGA 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 7F687FC0, 0040 [ 0.000000] ACPI: APIC 7F686CEC, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7F686D54, 0038 (r1 Compal CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F686D8C, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: BOOT 7F686FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7F686DFA, 0176 (r1 Compal CALISTGA 6040000 TBD 1) [ 0.000000] ACPI: APIC 7F686F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F681566, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6814C0, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F680FF4, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Compal [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517779 [ 0.000000] Kernel command line: root=UUID=6b5039e1-b98e-48f3-94e9-3341d6d4fc14 ro quiet vga=792 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.036 MHz processor. [ 19.577862] Console: colour dummy device 80x25 [ 19.577866] console [tty0] enabled [ 19.578196] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 19.578512] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.675340] Memory: 2056880k/2087424k available (2176k kernel code, 29312k reserved, 1006k data, 368k init, 1169920k highmem) [ 19.675348] virtual kernel memory layout: [ 19.675349] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 19.675350] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 19.675351] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 19.675352] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 19.675353] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 19.675354] .data : 0xc03201f4 - 0xc041bdc4 (1006 kB) [ 19.675355] .text : 0xc0100000 - 0xc03201f4 (2176 kB) [ 19.675358] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.675405] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 19.675555] hpet clockevent registered [ 19.755528] Calibrating delay using timer specific routine.. 3462.11 BogoMIPS (lpj=6924239) [ 19.755553] Security Framework initialized [ 19.755560] SELinux: Disabled at boot. [ 19.755574] AppArmor: AppArmor initialized [ 19.755579] Failure registering capabilities with primary security module. [ 19.755587] Mount-cache hash table entries: 512 [ 19.755720] Initializing cgroup subsys ns [ 19.755725] Initializing cgroup subsys cpuacct [ 19.755736] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 19.755743] monitor/mwait feature present. [ 19.755745] using mwait in idle threads. [ 19.755749] CPU: L1 I cache: 32K, L1 D cache: 32K [ 19.755751] CPU: L2 cache: 2048K [ 19.755754] CPU: Physical Processor ID: 0 [ 19.755755] CPU: Processor Core ID: 0 [ 19.755757] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 19.755767] Compat vDSO mapped to ffffe000. [ 19.755782] Checking 'hlt' instruction... OK. [ 19.771925] SMP alternatives: switching to UP code [ 19.773580] Early unpacking initramfs... done [ 20.116714] ACPI: Core revision 20070126 [ 20.116757] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 20.151015] CPU0: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02 [ 20.151032] SMP alternatives: switching to SMP code [ 20.151772] Booting processor 1/1 eip 3000 [ 20.162004] Initializing CPU#1 [ 20.239315] Calibrating delay using timer specific routine.. 3442.07 BogoMIPS (lpj=6884155) [ 20.239322] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 20.239327] monitor/mwait feature present. [ 20.239330] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.239332] CPU: L2 cache: 2048K [ 20.239334] CPU: Physical Processor ID: 0 [ 20.239335] CPU: Processor Core ID: 1 [ 20.239337] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 20.239942] CPU1: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02 [ 20.239966] Total of 2 processors activated (6904.19 BogoMIPS). [ 20.240165] ENABLING IO-APIC IRQs [ 20.240356] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 20.387366] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 20.407375] Brought up 2 CPUs [ 20.407400] CPU0 attaching sched-domain: [ 20.407402] domain 0: span 03 [ 20.407404] groups: 01 02 [ 20.407407] CPU1 attaching sched-domain: [ 20.407409] domain 0: span 03 [ 20.407410] groups: 02 01 [ 20.407665] net_namespace: 64 bytes [ 20.407675] Booting paravirtualized kernel on bare hardware [ 20.408142] Time: 6:33:38 Date: 06/04/08 [ 20.408170] NET: Registered protocol family 16 [ 20.408389] EISA bus registered [ 20.408394] ACPI: bus type pci registered [ 20.408596] PCI: BIOS BUG #81[49435000] found [ 20.408601] PCI: Using configuration type 1 [ 20.408602] Setting up standard PCI resources [ 20.413166] ACPI: EC: Look up EC in DSDT [ 20.428444] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 20.428446] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 20.428661] ACPI: Interpreter enabled [ 20.428663] ACPI: (supports S0 S3 S4 S5) [ 20.428678] ACPI: Using IOAPIC for interrupt routing [ 20.432456] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 20.432459] ACPI: EC: driver started in poll mode [ 20.432506] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.433384] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 20.433388] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 20.434581] PCI: Transparent bridge - 0000:00:1e.0 [ 20.434682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.434952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 20.435068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 20.435182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 20.435306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 20.439266] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 20.439361] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 20.439451] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 20.439540] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 20.439628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 20.439715] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 20.439803] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 20.439890] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 20.440032] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.440067] pnp: PnP ACPI init [ 20.440075] ACPI: bus type pnp registered [ 20.441557] pnp: PnP ACPI: found 10 devices [ 20.441559] ACPI: ACPI bus type pnp unregistered [ 20.441562] PnPBIOS: Disabled by ACPI PNP [ 20.441832] PCI: Using ACPI for IRQ routing [ 20.441835] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.441839] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3 [ 20.441841] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3 [ 20.451345] NET: Registered protocol family 8 [ 20.451347] NET: Registered protocol family 20 [ 20.451390] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 20.451394] hpet0: 3 64-bit timers, 14318180 Hz [ 20.452431] AppArmor: AppArmor Filesystem Enabled [ 20.455229] Time: tsc clocksource has been installed. [ 20.455243] Switched to high resolution mode on CPU 0 [ 20.455351] Switched to high resolution mode on CPU 1 [ 20.464417] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 20.482820] system 00:01: ioport range 0xfe00-0xfe7f has been reserved [ 20.482823] system 00:01: ioport range 0xfe80-0xfeff has been reserved [ 20.482825] system 00:01: ioport range 0xff00-0xff7f has been reserved [ 20.482828] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 20.482831] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 20.482834] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 20.482837] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 20.482840] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 20.482842] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 20.482845] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 20.482848] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 20.482856] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 20.483064] system 00:06: ioport range 0x800-0x80f has been reserved [ 20.483067] system 00:06: ioport range 0x1000-0x107f has been reserved [ 20.483070] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 20.516615] PCI: Bridge: 0000:00:1c.0 [ 20.516617] IO window: disabled. [ 20.516623] MEM window: d0000000-d00fffff [ 20.516628] PREFETCH window: disabled. [ 20.516634] PCI: Bridge: 0000:00:1c.2 [ 20.516637] IO window: 2000-2fff [ 20.516644] MEM window: d0200000-d02fffff [ 20.516648] PREFETCH window: 88000000-880fffff [ 20.516654] PCI: Bridge: 0000:00:1c.3 [ 20.516655] IO window: disabled. [ 20.516661] MEM window: disabled. [ 20.516665] PREFETCH window: disabled. [ 20.516679] PCI: Bus 7, cardbus bridge: 0000:06:04.0 [ 20.516681] IO window: 00003400-000034ff [ 20.516686] IO window: 00003800-000038ff [ 20.516691] PREFETCH window: 8c000000-8fffffff [ 20.516697] MEM window: 90000000-93ffffff [ 20.516702] PCI: Bridge: 0000:00:1e.0 [ 20.516705] IO window: 3000-3fff [ 20.516711] MEM window: d0100000-d01fffff [ 20.516715] PREFETCH window: disabled. [ 20.516747] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 20.516754] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 20.516779] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17 [ 20.516785] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 20.516811] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 20.516818] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 20.516830] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [ 20.516836] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 20.516855] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 20.516869] NET: Registered protocol family 2 [ 20.591637] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.599480] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 20.602763] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 20.603022] TCP: Hash tables configured (established 131072 bind 65536) [ 20.603025] TCP reno registered [ 20.619285] checking if image is initramfs... it is [ 21.305676] Freeing initrd memory: 7994k freed [ 21.305869] Simple Boot Flag at 0x36 set to 0x1 [ 21.306611] audit: initializing netlink socket (disabled) [ 21.306626] audit(1212561218.468:1): initialized [ 21.306880] highmem bounce pool size: 64 pages [ 21.309030] VFS: Disk quotas dquot_6.5.1 [ 21.309111] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.309245] io scheduler noop registered [ 21.309247] io scheduler anticipatory registered [ 21.309249] io scheduler deadline registered [ 21.309259] io scheduler cfq registered (default) [ 21.309272] Boot video device is 0000:00:02.0 [ 21.309486] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 21.309548] assign_interrupt_mode Found MSI capability [ 21.309600] Allocate Port Service[0000:00:1c.0:pcie00] [ 21.309647] Allocate Port Service[0000:00:1c.0:pcie02] [ 21.309756] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 21.309817] assign_interrupt_mode Found MSI capability [ 21.309865] Allocate Port Service[0000:00:1c.2:pcie00] [ 21.309902] Allocate Port Service[0000:00:1c.2:pcie02] [ 21.310013] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 21.310074] assign_interrupt_mode Found MSI capability [ 21.310122] Allocate Port Service[0000:00:1c.3:pcie00] [ 21.310160] Allocate Port Service[0000:00:1c.3:pcie02] [ 21.310448] isapnp: Scanning for PnP cards... [ 22.330140] isapnp: No Plug & Play device found [ 22.357406] Real Time Clock Driver v1.12ac [ 22.357620] hpet_resources: 0xfed00000 is busy [ 22.357648] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.358937] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.359007] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 22.359111] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 22.398797] i8042.c: Detected active multiplexing controller, rev 1.1. [ 22.437275] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.437280] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 22.437283] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 22.437285] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 22.437288] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 22.454388] mice: PS/2 mouse device common for all mice [ 22.454518] EISA: Probing bus 0 at eisa.0 [ 22.454525] Cannot allocate resource for EISA slot 1 [ 22.454528] Cannot allocate resource for EISA slot 2 [ 22.454530] Cannot allocate resource for EISA slot 3 [ 22.454552] EISA: Detected 0 cards. [ 22.454556] cpuidle: using governor ladder [ 22.454557] cpuidle: using governor menu [ 22.454640] NET: Registered protocol family 1 [ 22.454668] Using IPI No-Shortcut mode [ 22.454699] registered taskstats version 1 [ 22.454809] Magic number: 12:960:568 [ 22.454843] hash matches device ptyb0 [ 22.454890] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 22.454892] EDD information not available. [ 22.455107] Freeing unused kernel memory: 368k freed [ 22.468445] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 22.626077] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total 7872k [ 22.626081] vesafb: mode is 1024x768x32, linelength=4096, pages=1 [ 22.626083] vesafb: scrolling: redraw [ 22.626085] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 22.626202] Console: switching to colour frame buffer device 128x48 [ 22.662012] fb0: VESA VGA frame buffer device [ 22.946031] fuse init (API version 7.9) [ 22.971630] ACPI: SSDT 7F681D00, 0231 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 22.971828] ACPI: SSDT 7F6817C5, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 22.973456] Monitor-Mwait will be used to enter C-1 state [ 22.973459] Monitor-Mwait will be used to enter C-2 state [ 22.973461] Monitor-Mwait will be used to enter C-3 state [ 22.973594] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 22.973599] ACPI: Processor [CPU0] (supports 8 throttling states) [ 22.973814] ACPI: SSDT 7F681F31, 00B1 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 22.973996] ACPI: SSDT 7F681C7B, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 22.974711] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 22.974716] ACPI: Processor [CPU1] (supports 8 throttling states) [ 23.467938] r8169 Gigabit Ethernet driver 2.2LK loaded [ 23.467971] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17 [ 23.467993] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 23.468333] eth0: RTL8168b/8111b at 0xf8862000, 00:16:d4:de:e6:ce, XID 38000000 IRQ 220 [ 23.876330] usbcore: registered new interface driver usbfs [ 23.876355] usbcore: registered new interface driver hub [ 23.876382] usbcore: registered new device driver usb [ 23.877460] USB Universal Host Controller Interface driver v3.0 [ 23.877512] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 23.877522] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.877526] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.877772] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 23.877804] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820 [ 23.877940] usb usb1: configuration #1 chosen from 1 choice [ 23.877963] hub 1-0:1.0: USB hub found [ 23.877968] hub 1-0:1.0: 2 ports detected [ 23.982753] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 23.982767] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.982772] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.982798] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 23.982832] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840 [ 23.982955] usb usb2: configuration #1 chosen from 1 choice [ 23.982979] hub 2-0:1.0: USB hub found [ 23.982984] hub 2-0:1.0: 2 ports detected [ 24.068727] SCSI subsystem initialized [ 24.076186] libata version 3.00 loaded. [ 24.086669] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 [ 24.086680] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.086685] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.086708] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 24.086741] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001860 [ 24.086860] usb usb3: configuration #1 chosen from 1 choice [ 24.086884] hub 3-0:1.0: USB hub found [ 24.086889] hub 3-0:1.0: 2 ports detected [ 24.191859] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19 [ 24.191871] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 24.191876] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 24.191901] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 24.191935] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 [ 24.192055] usb usb4: configuration #1 chosen from 1 choice [ 24.192079] hub 4-0:1.0: USB hub found [ 24.192084] hub 4-0:1.0: 2 ports detected [ 24.226523] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 24.293636] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 24.293651] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 24.293655] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 24.293681] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 24.297599] ehci_hcd 0000:00:1d.7: debug port 1 [ 24.297606] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 24.297613] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0644000 [ 24.354453] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.354572] usb usb5: configuration #1 chosen from 1 choice [ 24.354597] hub 5-0:1.0: USB hub found [ 24.354604] hub 5-0:1.0: 8 ports detected [ 24.457536] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 24.457580] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 24.457595] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 24.457783] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 24.457791] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 24.510551] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0100000-d01007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 24.554001] ata_piix 0000:00:1f.1: version 2.12 [ 24.554018] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 24.554055] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 24.554146] scsi0 : ata_piix [ 24.554609] scsi1 : ata_piix [ 24.555122] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 24.555125] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 24.767528] usb 1-2: device not accepting address 2, error -71 [ 24.885945] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100 [ 24.885952] ata1.00: 312581808 sectors, multi 16: LBA48 [ 24.886010] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC04, max UDMA/33 [ 24.902888] ata1.00: configured for UDMA/100 [ 25.073611] ata1.01: configured for UDMA/33 [ 25.073687] ata2: port disabled. ignoring. [ 25.073872] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5 [ 25.089895] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L632D SC04 PQ: 0 ANSI: 5 [ 25.096631] Driver 'sd' needs updating - please use bus_type methods [ 25.096713] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 25.096725] sd 0:0:0:0: [sda] Write Protect is off [ 25.096727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.096743] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.096791] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 25.096801] sd 0:0:0:0: [sda] Write Protect is off [ 25.096803] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.096818] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.096822] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 25.337017] Clocksource tsc unstable (delta = -3275212302 ns) [ 25.338006] Time: hpet clocksource has been installed. [ 25.441056] usb 5-4: new high speed USB device using ehci_hcd and address 3 [ 25.575575] usb 5-4: configuration #1 chosen from 1 choice [ 25.757869] sda1 sda2 sda3 sda4 [ 25.778298] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.783731] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.783751] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 25.792959] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f769440266f] [ 25.800315] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 25.833054] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 25.833058] Uniform CD-ROM driver Revision: 3.20 [ 25.833112] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 25.894277] usb 1-2: configuration #1 chosen from 1 choice [ 26.056615] EXT3-fs: INFO: recovery required on readonly filesystem. [ 26.056619] EXT3-fs: write access will be enabled during recovery. [ 37.078924] kjournald starting. Commit interval 5 seconds [ 37.078964] EXT3-fs: recovery complete. [ 37.083672] EXT3-fs: mounted filesystem with ordered data mode. [ 48.226060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 48.262537] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 48.301986] Linux agpgart interface v0.102 [ 48.316928] agpgart: Detected an Intel 945GM Chipset. [ 48.317947] agpgart: Detected 7932K stolen memory. [ 48.335556] agpgart: AGP aperture is 256M @ 0xc0000000 [ 48.432762] iTCO_vendor_support: vendor-support=0 [ 48.480724] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 48.678751] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets [ 48.678755] intelfb: Version 0.9.4 [ 48.686561] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 48.686568] intelfb: Cannot reserve FB region. [ 48.877638] input: Power Button (FF) as /devices/virtual/input/input2 [ 48.934257] ACPI: Power Button (FF) [PWRF] [ 48.934348] input: Lid Switch as /devices/virtual/input/input3 [ 48.952495] ACPI: Lid Switch [LID0] [ 48.952561] input: Power Button (CM) as /devices/virtual/input/input4 [ 49.008423] ACPI: Power Button (CM) [PWRB] [ 49.079299] sdhci: Secure Digital Host Controller Interface driver [ 49.079303] sdhci: Copyright(c) Pierre Ossman [ 49.079352] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1) [ 49.079374] PCI: Enabling device 0000:06:04.2 (0000 -> 0002) [ 49.079382] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 16 [ 49.079451] mmc0: SDHCI at 0xd0100c00 irq 16 PIO [ 49.079460] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1) [ 49.079479] PCI: Enabling device 0000:06:04.4 (0000 -> 0002) [ 49.079483] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 17 (level, low) -> IRQ 16 [ 49.079524] mmc1: SDHCI at 0xd0100900 irq 16 PIO [ 49.440334] Yenta: CardBus bridge found at 0000:06:04.0 [14c0:0020] [ 49.440360] Yenta: Using CSCINT to route CSC interrupts to PCI [ 49.440362] Yenta: Routing CardBus interrupts to PCI [ 49.440368] Yenta TI: socket 0000:06:04.0, mfunc 0x88501212, devctl 0x44 [ 49.682281] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19 [ 49.682287] Socket status: 30000006 [ 49.682289] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 49.682295] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 49.682297] cs: IO port probe 0x3000-0x3fff: clean. [ 49.682545] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff [ 49.853980] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input5 [ 49.913741] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 49.913780] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 49.927095] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 50.044540] intel_rng: FWH not detected [ 50.161889] ACPI: EC: acpi_ec_wait timeout, status = 0, expect_event = 1 [ 50.162376] ACPI: EC: read timeout, command = 128 [ 50.162698] ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126] [ 50.162705] ACPI Exception (dswexec-0462): AE_TIME, While resolving operands for [OpcodeName unavailable] [20070126] [ 50.162711] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node f7c49c78), AE_TIME [ 50.179546] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7 [ 50.216863] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 50.224666] ACPI: AC Adapter [ACAD] (on-line) [ 50.235813] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8 [ 50.269796] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 50.420450] ACPI: Battery Slot [BAT1] (battery present) [ 50.471002] ath_hal: module license 'Proprietary' taints kernel. [ 50.503767] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 50.563716] wlan: 0.9.4 [ 50.603725] ath_pci: 0.9.4 [ 50.603803] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 50.603818] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 51.122532] Bluetooth: Core ver 2.11 [ 51.217883] NET: Registered protocol family 31 [ 51.217887] Bluetooth: HCI device and connection manager initialized [ 51.217891] Bluetooth: HCI socket layer initialized [ 51.246366] Bluetooth: HCI USB driver ver 2.9 [ 51.257857] usbcore: registered new interface driver hci_usb [ 51.310227] r8169: eth0: link down [ 51.488715] ath_rate_sample: 1.2 (0.9.4) [ 51.489161] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 51.489167] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 51.489176] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 51.489182] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 51.489186] wifi0: mac 10.1 phy 6.1 radio 10.2 [ 51.489190] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 51.489192] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 51.489193] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 51.489195] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 51.489197] wifi0: Use hw queue 8 for CAB traffic [ 51.489198] wifi0: Use hw queue 9 for beacons [ 51.570439] wifi0: Atheros 5424/2424: mem=0xd0000000, irq=19 [ 51.665784] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 51.665810] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 51.696982] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 52.945895] cs: IO port probe 0x100-0x3af: clean. [ 52.948099] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 52.948986] cs: IO port probe 0x820-0x8ff: clean. [ 52.949697] cs: IO port probe 0xc00-0xcf7: clean. [ 52.950579] cs: IO port probe 0xa00-0xaff: clean. [ 53.215834] lp: driver loaded but no devices found [ 53.535391] Adding 2184832k swap on /dev/sda3. Priority:-1 extents:1 across:2184832k [ 53.849439] EXT3 FS on sda2, internal journal [ 54.027233] device-mapper: uevent: version 1.0.3 [ 54.027265] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 54.936220] kjournald starting. Commit interval 5 seconds [ 54.936948] EXT3 FS on sda1, internal journal [ 54.936957] EXT3-fs: mounted filesystem with ordered data mode. [ 54.989827] kjournald starting. Commit interval 5 seconds [ 54.989854] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 55.002500] EXT3 FS on sda4, internal journal [ 55.002504] EXT3-fs: mounted filesystem with writeback data mode. [ 56.193232] ip_tables: (C) 2000-2006 Netfilter Core Team [ 58.930997] No dock devices found. [ 63.265097] NET: Registered protocol family 10 [ 63.265368] lo: Disabled Privacy Extensions [ 63.265796] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 64.318111] ppdev: user-space parallel port driver [ 64.656513] audit(1212561265.687:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5367 profile="/usr/sbin/cupsd" namespace="default" [ 72.779798] Bluetooth: L2CAP ver 2.9 [ 72.779804] Bluetooth: L2CAP socket layer initialized [ 72.864661] Bluetooth: RFCOMM socket layer initialized [ 72.864678] Bluetooth: RFCOMM TTY layer initialized [ 72.864682] Bluetooth: RFCOMM ver 1.8 [ 76.767171] [drm] Initialized drm 1.1.0 20060810 [ 76.770173] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 76.770245] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 87.127943] psmouse.c: Failed to reset mouse on isa0060/serio1 [ 87.249291] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9 [ 87.288069] psmouse.c: Failed to enable mouse on isa0060/serio1 [ 88.812800] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. [ 94.892854] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. [ 96.671141] psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. [ 97.692972] psmouse.c: failed to re-enable mouse on isa0060/serio1 [ 97.692981] psmouse.c: resync failed, issuing reconnect request [ 97.697619] psmouse.c: Failed to reset mouse on isa0060/serio1 [ 97.815879] psmouse.c: Failed to enable mouse on isa0060/serio1 [ 109.249385] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 3 bytes away. [ 122.695459] CPU0 attaching NULL sched-domain. [ 122.695463] CPU1 attaching NULL sched-domain. [ 122.731022] CPU0 attaching sched-domain: [ 122.731031] domain 0: span 03 [ 122.731035] groups: 01 02 [ 122.731042] CPU1 attaching sched-domain: [ 122.731045] domain 0: span 03 [ 122.731049] groups: 02 01 [ 126.705301] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 126.852890] NET: Registered protocol family 17 [ 129.798066] psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. [ 130.843926] psmouse.c: failed to re-enable mouse on isa0060/serio1 [ 130.843932] psmouse.c: resync failed, issuing reconnect request [ 131.468100] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 2 bytes away. [ 142.332558] tun: Universal TUN/TAP device driver, 1.6 [ 142.332562] tun: (C) 1999-2004 Max Krasnyansky [ 142.333236] tun1: Disabled Privacy Extensions [ 147.706057] ath0: no IPv6 routers present