This is after boot, the sound works here. ~$ tail -2 /proc/asound/oss/sndstat Mixers: 0: ESS Technology ESS1988 ~$ amixer Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-46.50dB] [off] Simple mixer control '3D Control - Center',0 Capabilities: volume volume-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 15 Mono: 0 [0%] Simple mixer control '3D Control - Depth',0 Capabilities: volume volume-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 15 Mono: 0 [0%] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [on] Front Right: Playback 31 [100%] [12.00dB] [on] Simple mixer control 'Line',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 31 [100%] [12.00dB] [on] Capture [off] Front Right: Playback 31 [100%] [12.00dB] [on] Capture [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 31 [100%] [12.00dB] [on] Capture [off] Front Right: Playback 31 [100%] [12.00dB] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 31 [100%] [12.00dB] [on] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Video',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-34.50dB] [off] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'PC Speaker',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 15 Mono: Playback 15 [100%] [0.00dB] [on] Simple mixer control 'Aux',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mono Output Select',0 Capabilities: enum Items: 'Mix' 'Mic' Item0: 'Mix' Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 9 [60%] [13.50dB] [on] Front Right: Capture 9 [60%] [13.50dB] [on] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] ~$ lspci -nv 00:00.0 0600: 8086:7190 (rev 03) Flags: bus master, medium devsel, latency 64 Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: 00:01.0 0604: 8086:7191 (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: fc100000-fdffffff Prefetchable memory behind bridge: 30000000-300fffff 00:04.0 0401: 125d:1988 (rev 12) Subsystem: 1509:1740 Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at 1400 [size=256] Capabilities: 00:06.0 0780: 1813:4000 (rev 02) Subsystem: 16be:0001 Flags: medium devsel, IRQ 255 Memory at fc000000 (32-bit, non-prefetchable) [disabled] [size=4K] I/O ports at 1800 [disabled] [size=256] Capabilities: 00:07.0 0601: 8086:7110 (rev 02) Flags: bus master, medium devsel, latency 0 00:07.1 0101: 8086:7111 (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 64 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at 1050 [size=16] 00:07.2 0c03: 8086:7112 (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at 1060 [size=32] 00:07.3 0680: 8086:7113 (rev 03) Flags: medium devsel, IRQ 9 00:09.0 0200: 10ec:8139 (rev 10) Subsystem: 10ec:8139 Flags: bus master, medium devsel, latency 64, IRQ 10 I/O ports at 1c00 [size=256] Memory at fc001000 (32-bit, non-prefetchable) [size=256] Capabilities: 00:0c.0 0607: 104c:ac51 Subsystem: 1509:1760 Flags: bus master, medium devsel, latency 168, IRQ 10 Memory at 30100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 20000000-23fff000 (prefetchable) Memory window 1: 24000000-27fff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff 16-bit legacy interface ports at 0001 00:0c.1 0607: 104c:ac51 Subsystem: 1509:1760 Flags: bus master, medium devsel, latency 168, IRQ 10 Memory at 30101000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 28000000-2bfff000 (prefetchable) Memory window 1: 2c000000-2ffff000 I/O window 0: 00003800-000038ff I/O window 1: 00003c00-00003cff 16-bit legacy interface ports at 0001 01:00.0 0300: 1002:4c4d (rev 64) (prog-if 00 [VGA]) Subsystem: 1509:1730 Flags: bus master, stepping, medium devsel, latency 66, IRQ 5 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] I/O ports at 2000 [size=256] Memory at fc100000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 30000000 [disabled] [size=128K] Capabilities: ~$ asoundconf list Names of available sound cards: PCI ~$ cat /etc/asound.conf ~/.asoundrc* cat: /etc/asound.conf: No such file or directory cat: /home/andreas/.asoundrc*: No such file or directory ~$ dmesg [ 0.000000] Linux version 2.6.20-15-386 (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Sun Apr 15 07:34:00 UTC 2007 (Ubuntu 2.6.20-15.27-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e9400 size: 0000000000016c00 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fef0000 end: 000000000fff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000fff0000 size: 000000000000fc00 end: 000000000ffffc00 type: 3 [ 0.000000] copy_e820_map() start: 000000000ffffc00 size: 0000000000000400 end: 0000000010000000 type: 4 [ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) [ 0.000000] BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data) [ 0.000000] BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 65520 [ 0.000000] HighMem 65520 -> 65520 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 65520 [ 0.000000] On node 0 totalpages: 65520 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 479 pages used for memmap [ 0.000000] Normal zone: 60945 pages, LIFO batch:15 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 FIC ) @ 0x000f6bc0 [ 0.000000] ACPI: RSDT (v001 FIC ND000030 0x00000001 FIC 0x00000000) @ 0x0fffb152 [ 0.000000] ACPI: FADT (v001 FIC ND000030 0x00000001 FACP 0x000f4240) @ 0x0ffffb64 [ 0.000000] ACPI: BOOT (v001 FIC ND000030 0x00000001 FIC 0x00000001) @ 0x0ffffbd8 [ 0.000000] ACPI: DSDT (v001 FIC ND000030 0x00000001 MSFT 0x0100000b) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000) [ 0.000000] Detected 699.617 MHz processor. [ 13.861098] Built 1 zonelists. Total pages: 65009 [ 13.861105] Kernel command line: root=/dev/hda4 [ 13.861615] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 13.861637] mapped APIC to ffffd000 (01202000) [ 13.861647] Enabling fast FPU save and restore... done. [ 13.861654] Enabling unmasked SIMD FPU exception support... done. [ 13.861676] Initializing CPU#0 [ 13.861772] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 13.863238] Console: colour VGA+ 80x25 [ 13.865395] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.865962] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 13.891808] Memory: 247760k/262080k available (1916k kernel code, 13828k reserved, 864k data, 328k init, 0k highmem) [ 13.891900] virtual kernel memory layout: [ 13.891904] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB) [ 13.891909] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 13.891913] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) [ 13.891917] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) [ 13.891921] .init : 0xc03ba000 - 0xc040c000 ( 328 kB) [ 13.891925] .data : 0xc02df353 - 0xc03b7434 ( 864 kB) [ 13.891930] .text : 0xc0100000 - 0xc02df353 (1916 kB) [ 13.892289] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 13.969722] Calibrating delay using timer specific routine.. 1400.08 BogoMIPS (lpj=2800173) [ 13.969897] Security Framework v1.0.0 initialized [ 13.969959] SELinux: Disabled at boot. [ 13.970038] Mount-cache hash table entries: 512 [ 13.970321] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 13.970347] CPU: L1 I cache: 16K, L1 D cache: 16K [ 13.970428] CPU: L2 cache: 256K [ 13.970474] CPU serial number disabled. [ 13.970523] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 13.970547] Compat vDSO mapped to ffffe000. [ 13.970605] Remapping vsyscall page to ffffe000 [ 13.970667] CPU: Intel Pentium III (Coppermine) stepping 0a [ 13.970815] Checking 'hlt' instruction... OK. [ 13.986688] Early unpacking initramfs... done [ 15.016578] ACPI: Core revision 20060707 [ 15.018865] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 15.023331] ACPI: setting ELCR to 0200 (from 0020) [ 15.032316] Booting paravirtualized kernel on bare hardware [ 15.032506] Time: 11:21:12 Date: 05/19/107 [ 15.032631] NET: Registered protocol family 16 [ 15.032893] EISA bus registered [ 15.032949] ACPI: bus type pci registered [ 15.040816] PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1 [ 15.040868] PCI: Using configuration type 1 [ 15.040915] Setting up standard PCI resources [ 15.051871] ACPI: Interpreter enabled [ 15.051934] ACPI: Using PIC for interrupt routing [ 15.056306] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.056367] PCI: Probing PCI hardware (bus 00) [ 15.058093] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 15.061869] PCI quirk: region 1000-103f claimed by PIIX4 ACPI [ 15.061925] PCI quirk: region 1040-104f claimed by PIIX4 SMB [ 15.061980] PIIX4 devres C PIO at 0068-006f [ 15.062280] Boot video device is 0000:01:00.0 [ 15.062500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.069000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *0, disabled. [ 15.069840] ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *0, disabled. [ 15.070656] ACPI: PCI Interrupt Link [LNKC] (IRQs *5) [ 15.071348] ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *0, disabled. [ 15.077787] ACPI: Power Resource [PUSB] (off) [ 15.078584] ACPI: Power Resource [PFAN] (on) [ 15.078855] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.078930] pnp: PnP ACPI init [ 15.091093] pnp: PnP ACPI: found 13 devices [ 15.091159] PnPBIOS: Disabled by ACPI PNP [ 15.091329] PCI: Using ACPI for IRQ routing [ 15.091381] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.093521] NET: Registered protocol family 8 [ 15.093570] NET: Registered protocol family 20 [ 15.093832] pnp: 00:05: ioport range 0x1000-0x104f could not be reserved [ 15.093888] pnp: 00:05: ioport range 0xfe00-0xfe01 has been reserved [ 15.094674] PCI: Bridge: 0000:00:01.0 [ 15.094729] IO window: 2000-2fff [ 15.094778] MEM window: fc100000-fdffffff [ 15.094830] PREFETCH window: 30000000-300fffff [ 15.094880] PCI: Bus 2, cardbus bridge: 0000:00:0c.0 [ 15.094929] IO window: 00003000-000030ff [ 15.094978] IO window: 00003400-000034ff [ 15.095029] PREFETCH window: 20000000-23ffffff [ 15.095080] MEM window: 24000000-27ffffff [ 15.095130] PCI: Bus 6, cardbus bridge: 0000:00:0c.1 [ 15.095180] IO window: 00003800-000038ff [ 15.095229] IO window: 00003c00-00003cff [ 15.095278] PREFETCH window: 28000000-2bffffff [ 15.095329] MEM window: 2c000000-2fffffff [ 15.095986] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 15.096040] PCI: setting IRQ 10 as level-triggered [ 15.096048] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 15.096175] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 15.096195] ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 15.096320] PCI: Setting latency timer of device 0000:00:0c.1 to 64 [ 15.096379] NET: Registered protocol family 2 [ 15.133271] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 15.133504] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 15.133649] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 15.133745] TCP: Hash tables configured (established 8192 bind 4096) [ 15.133795] TCP reno registered [ 15.145435] checking if image is initramfs... it is [ 17.122765] Freeing initrd memory: 8056k freed [ 17.123308] Simple Boot Flag at 0x38 set to 0x1 [ 17.123794] audit: initializing netlink socket (disabled) [ 17.123877] audit(1182252074.440:1): initialized [ 17.124246] VFS: Disk quotas dquot_6.5.1 [ 17.124342] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.124509] io scheduler noop registered [ 17.124590] io scheduler anticipatory registered [ 17.124667] io scheduler deadline registered [ 17.124764] io scheduler cfq registered (default) [ 17.124886] Limiting direct PCI/PCI transfers. [ 17.125462] isapnp: Scanning for PnP cards... [ 17.479523] isapnp: No Plug & Play device found [ 17.561377] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.561646] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.562070] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 17.563712] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.564434] mice: PS/2 mouse device common for all mice [ 17.565852] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.566506] input: Macintosh mouse button emulation as /class/input/input0 [ 17.566648] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 17.566705] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 17.567168] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12 [ 17.568358] i8042.c: Detected active multiplexing controller, rev 1.1. [ 17.569037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.569094] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 17.569145] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 17.569197] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 17.569246] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 17.569591] EISA: Probing bus 0 at eisa.0 [ 17.569653] Cannot allocate resource for EISA slot 1 [ 17.569704] Cannot allocate resource for EISA slot 2 [ 17.569753] Cannot allocate resource for EISA slot 3 [ 17.569828] EISA: Detected 0 cards. [ 17.600078] TCP cubic registered [ 17.600141] NET: Registered protocol family 1 [ 17.600231] Using IPI Shortcut mode [ 17.600425] ACPI: (supports S0 S3 S4 S5) [ 17.600722] Magic number: 11:415:378 [ 17.602078] Freeing unused kernel memory: 328k freed [ 17.603933] Time: tsc clocksource has been installed. [ 17.604984] input: AT Translated Set 2 keyboard as /class/input/input1 [ 18.100537] Capability LSM initialized [ 18.150657] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 18.221457] ACPI: Transitioning device [FAN] to D0 [ 18.221518] ACPI: Transitioning device [FAN] to D0 [ 18.221568] ACPI: Fan [FAN] (off) [ 18.234806] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 18.235884] ACPI: Processor [CPU0] (supports 8 throttling states) [ 18.242602] ACPI: Thermal Zone [THRM] (35 C) [ 18.478647] md: linear personality registered for level -1 [ 18.521029] md: multipath personality registered for level -4 [ 18.532493] md: raid0 personality registered for level 0 [ 18.546512] md: raid1 personality registered for level 1 [ 18.557569] raid5: automatically using best checksumming function: pIII_sse [ 18.575444] pIII_sse : 1391.000 MB/sec [ 18.575492] raid5: using function: pIII_sse (1391.000 MB/sec) [ 18.659603] raid6: int32x1 214 MB/s [ 18.727558] raid6: int32x2 251 MB/s [ 18.795506] raid6: int32x4 203 MB/s [ 18.863583] raid6: int32x8 181 MB/s [ 18.931344] raid6: mmxx1 635 MB/s [ 18.999256] raid6: mmxx2 793 MB/s [ 19.067307] raid6: sse1x1 555 MB/s [ 19.135206] raid6: sse1x2 787 MB/s [ 19.135255] raid6: using algorithm sse1x2 (787 MB/s) [ 19.135307] md: raid6 personality registered for level 6 [ 19.135357] md: raid5 personality registered for level 5 [ 19.135405] md: raid4 personality registered for level 4 [ 19.247014] md: raid10 personality registered for level 10 [ 20.362798] PIIX4: IDE controller at PCI slot 0000:00:07.1 [ 20.362882] PIIX4: chipset revision 1 [ 20.362930] PIIX4: not 100% native mode: will probe irqs later [ 20.362991] ide0: BM-DMA at 0x1050-0x1057, BIOS settings: hda:DMA, hdb:pio [ 20.363130] ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:pio, hdd:pio [ 20.363259] Probing IDE interface ide0... [ 20.399004] usbcore: registered new interface driver usbfs [ 20.399113] usbcore: registered new interface driver hub [ 20.399212] usbcore: registered new device driver usb [ 20.403149] USB Universal Host Controller Interface driver v3.0 [ 20.517343] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 20.686546] hda: HITACHI_DK23CA-20, ATA DISK drive [ 20.865708] Floppy drive(s): fd0 is 1.44M [ 20.938856] FDC 0 is a post-1991 82077 [ 7.176000] Time: acpi_pm clocksource has been installed. [ 7.496000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 7.496000] Probing IDE interface ide1... [ 8.236000] hdc: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive [ 8.908000] ide1 at 0x170-0x177,0x376 on irq 15 [ 8.940000] SCSI subsystem initialized [ 8.964000] PCI: Enabling device 0000:00:07.2 (0000 -> 0001) [ 8.964000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 8.964000] PCI: setting IRQ 5 as level-triggered [ 8.964000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 8.964000] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 8.968000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 8.968000] uhci_hcd 0000:00:07.2: irq 5, io base 0x00001060 [ 8.968000] usb usb1: configuration #1 chosen from 1 choice [ 8.968000] hub 1-0:1.0: USB hub found [ 8.968000] hub 1-0:1.0: 2 ports detected [ 8.972000] libata version 2.20 loaded. [ 9.072000] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 9.072000] 8139cp 0000:00:09.0: Try the "8139too" driver instead. [ 9.080000] 8139too Fast Ethernet driver 0.9.28 [ 9.080000] PCI: Enabling device 0000:00:09.0 (0000 -> 0003) [ 9.080000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 9.080000] eth0: RealTek RTL8139 at 0xd0838000, 00:30:54:00:2f:41, IRQ 10 [ 9.080000] eth0: Identified 8139 chip type 'RTL-8139C' [ 9.144000] hda: max request size: 128KiB [ 9.164000] hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33) [ 9.164000] hda: cache flushes not supported [ 9.164000] hda: hda1 hda2 hda3 hda4 [ 9.204000] hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA [ 9.204000] Uniform CD-ROM driver Revision: 3.20 [ 9.796000] Attempting manual resume [ 9.800000] swsusp: Resume From Partition 254:2 [ 9.800000] PM: Checking swsusp image. [ 9.816000] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 9.840000] PM: Resume from disk failed. [ 9.936000] kjournald starting. Commit interval 5 seconds [ 9.936000] EXT3-fs: mounted filesystem with ordered data mode. [ 9.992000] usb 1-2: configuration #1 chosen from 1 choice [ 40.856000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 40.872000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 41.736000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device [ 41.800000] Linux agpgart interface v0.102 (c) Dave Jones [ 41.804000] agpgart: Detected an Intel 440BX Chipset. [ 41.812000] agpgart: AGP aperture is 64M @ 0xf8000000 [ 41.844000] Yenta: CardBus bridge found at 0000:00:0c.0 [1509:1760] [ 41.844000] Yenta: Enabling burst memory read transactions [ 41.844000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 41.844000] Yenta: Routing CardBus interrupts to PCI [ 41.844000] Yenta TI: socket 0000:00:0c.0, mfunc 0x010c1022, devctl 0x64 [ 42.076000] Yenta: ISA IRQ mask 0x0898, PCI irq 10 [ 42.076000] Socket status: 30000006 [ 42.076000] Yenta: CardBus bridge found at 0000:00:0c.1 [1509:1760] [ 42.076000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 42.076000] Yenta: Routing CardBus interrupts to PCI [ 42.076000] Yenta TI: socket 0000:00:0c.1, mfunc 0x010c1022, devctl 0x64 [ 42.308000] Yenta: ISA IRQ mask 0x0898, PCI irq 10 [ 42.308000] Socket status: 30000006 [ 43.408000] Synaptics Touchpad, model: 1, fw: 5.6, id: 0x9244b1, caps: 0x80471b/0x0 [ 43.444000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 43.524000] input: PC Speaker as /class/input/input3 [ 43.844000] parport: PnPBIOS parport detected. [ 43.844000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 43.912000] Real Time Clock Driver v1.12ac [ 44.200000] irda_init() [ 44.200000] NET: Registered protocol family 23 [ 44.992000] eth1: register 'cdc_ether' at usb-0000:00:07.2-2, CDC Ethernet Device, 00:15:0c:3b:b6:32 [ 44.992000] usbcore: registered new interface driver cdc_ether [ 45.420000] cs: IO port probe 0x100-0x3af: clean. [ 45.420000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 45.424000] cs: IO port probe 0x820-0x8ff: clean. [ 45.424000] cs: IO port probe 0xc00-0xcf7: clean. [ 45.424000] cs: IO port probe 0xa00-0xaff: clean. [ 45.628000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 45.628000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 45.628000] maestro3: enabled hack for 'LEGEND ZhaoYang 3100CF' [ 45.808000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 [ 45.812000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 45.812000] cs: IO port probe 0x820-0x8ff: clean. [ 45.812000] cs: IO port probe 0xc00-0xcf7: clean. [ 45.816000] cs: IO port probe 0xa00-0xaff: clean. [ 46.876000] lp0: using parport0 (interrupt-driven). [ 47.152000] Adding 1007992k swap on /dev/disk/by-uuid/da8270ba-b9bd-4ce5-bdbc-c1dfde05e69e. Priority:-1 extents:1 across:1007992k [ 47.316000] EXT3 FS on hda4, internal journal [ 48.940000] kjournald starting. Commit interval 5 seconds [ 48.944000] EXT3 FS on hda1, internal journal [ 48.944000] EXT3-fs: mounted filesystem with ordered data mode. [ 48.980000] kjournald starting. Commit interval 5 seconds [ 48.980000] EXT3 FS on dm-1, internal journal [ 48.980000] EXT3-fs: mounted filesystem with ordered data mode. [ 52.140000] ACPI: AC Adapter [ACAD] (off-line) [ 52.284000] ACPI: Battery Slot [BAT0] (battery present) [ 52.376000] input: Power Button (FF) as /class/input/input4 [ 52.376000] ACPI: Power Button (FF) [PWRF] [ 52.392000] input: Lid Switch as /class/input/input5 [ 52.392000] ACPI: Lid Switch [LID] [ 52.400000] input: Power Button (CM) as /class/input/input6 [ 52.400000] ACPI: Power Button (CM) [PWRB] [ 52.788000] Using specific hotkey driver [ 52.860000] No dock devices found. [ 52.980000] ibm_acpi: ec object not found [ 53.300000] pcc_acpi: loading... [ 53.924000] cpufreq: change failed with new_state 2 and result 0 [ 53.924000] cpufreq: change failed with new_state 2 and result 0 [ 64.768000] eth0: link down [ 66.004000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 66.004000] apm: overridden by ACPI. [ 71.596000] Bluetooth: Core ver 2.11 [ 71.596000] NET: Registered protocol family 31 [ 71.596000] Bluetooth: HCI device and connection manager initialized [ 71.596000] Bluetooth: HCI socket layer initialized [ 71.796000] Bluetooth: L2CAP ver 2.8 [ 71.796000] Bluetooth: L2CAP socket layer initialized [ 71.812000] Bluetooth: RFCOMM socket layer initialized [ 71.812000] Bluetooth: RFCOMM TTY layer initialized [ 71.812000] Bluetooth: RFCOMM ver 1.8 [ 84.988000] NET: Registered protocol family 17 [ 87.480000] NET: Registered protocol family 10 [ 87.480000] lo: Disabled Privacy Extensions [ 87.480000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 97.616000] eth1: no IPv6 routers present ~$ cat /proc/interrupts CPU0 0: 503669 XT-PIC-XT timer 1: 1130 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 5: 36900 XT-PIC-XT uhci_hcd:usb1, Allegro 6: 5 XT-PIC-XT floppy 7: 2 XT-PIC-XT parport0 8: 3 XT-PIC-XT rtc 9: 0 XT-PIC-XT acpi 10: 2 XT-PIC-XT yenta, yenta, eth0 12: 659316 XT-PIC-XT i8042 14: 28618 XT-PIC-XT ide0 15: 17639 XT-PIC-XT ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 ~$