IT8212F ATA RAID Controller not correctly initialised
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Invalid
|
Undecided
|
Unassigned | ||
linux-source-2.6.20 (Ubuntu) |
Won't Fix
|
Undecided
|
Unassigned |
Bug Description
I have an ITE made IT8212F RAID Controller that I use as an IDE Raid Controller (ATA 133); it is a PCI-Card, not an integrated chip. 2 120 Gig harddrives are attached and set up as RAID1. I use Ubuntu 7.04.
I also have another IDE harddrive that is not attached to the Raid Controller, but to the primary IDE controller of the motherboard instead. I boot from this harddrive (it's the MAXTOR harddrive).
Ubuntu seems to recognize everything, including the two dics, but somehow seems to have a problem initializing them. Dmesg reads as follows (I highlighted what I think are the important messages):
Quote:
sudo dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003feb0000 end: 000000003ffb0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffb0000 size: 0000000000010000 end: 000000003ffc0000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 0000000000030000 end: 000000003fff0000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000010000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff7c0000 size: 0000000000840000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262064
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262064
[ 0.000000] On node 0 totalpages: 262064
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32433 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f9b10
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x03000620 MSFT 0x00000097) @ 0x3ffb0000
[ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x03000620 MSFT 0x00000097) @ 0x3ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x03000620 MSFT 0x00000097) @ 0x3ffb0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x03000620 MSFT 0x00000097) @ 0x3ffc0040
[ 0.000000] ACPI: DSDT (v001 939A8 939A8202 0x00000202 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000)
[ 0.000000] Detected 1799.993 MHz processor.
[ 28.496029] Built 1 zonelists. Total pages: 260017
[ 28.496033] Kernel command line: root=UUID=
[ 28.496172] mapped APIC to ffffd000 (fee00000)
[ 28.496175] mapped IOAPIC to ffffc000 (fec00000)
[ 28.496178] Enabling fast FPU save and restore... done.
[ 28.496180] Enabling unmasked SIMD FPU exception support... done.
[ 28.496187] Initializing CPU#0
[ 28.496225] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 28.496281] spurious 8259A interrupt: IRQ7.
[ 28.497618] Console: colour VGA+ 80x25
[ 28.497996] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 28.498404] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 28.518212] Memory: 1027808k/1048256k available (1992k kernel code, 19680k reserved, 893k data, 328k init, 130752k highmem)
[ 28.518222] virtual kernel memory layout:
[ 28.518223] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 28.518225] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 28.518226] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 28.518227] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 28.518229] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 28.518230] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 28.518231] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 28.518234] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 28.596075] Calibrating delay using timer specific routine.. 3601.89 BogoMIPS (lpj=7203781)
[ 28.596116] Security Framework v1.0.0 initialized
[ 28.596122] SELinux: Disabled at boot.
[ 28.596137] Mount-cache hash table entries: 512
[ 28.596267] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 28.596275] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 28.596278] CPU: L2 Cache: 512K (64 bytes/line)
[ 28.596281] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 28.596291] Compat vDSO mapped to ffffe000.
[ 28.596295] Remapping vsyscall page to ffffe000
[ 28.596305] Checking 'hlt' instruction... OK.
[ 28.612187] SMP alternatives: switching to UP code
[ 28.612395] Freeing SMP alternatives: 11k freed
[ 28.612588] Early unpacking initramfs... done
[ 28.929714] ACPI: Core revision 20060707
[ 28.930167] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 28.931645] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[ 28.931660] Total of 1 processors activated (3601.89 BogoMIPS).
[ 28.932155] ENABLING IO-APIC IRQs
[ 28.932384] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 29.079364] Brought up 1 CPUs
[ 29.079583] Booting paravirtualized kernel on bare hardware
[ 29.079633] Time: 16:39:13 Date: 04/03/107
[ 29.079659] NET: Registered protocol family 16
[ 29.079733] EISA bus registered
[ 29.079737] ACPI: bus type pci registered
[ 29.080460] PCI: Using configuration type 1
[ 29.080461] Setting up standard PCI resources
[ 29.089829] ACPI: Interpreter enabled
[ 29.089832] ACPI: Using IOAPIC for interrupt routing
[ 29.090270] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.090274] PCI: Probing PCI hardware (bus 00)
[ 29.090577] PCI quirk: region 0800-083f claimed by ali7101 ACPI
[ 29.090857] Boot video device is 0000:01:00.0
[ 29.091023] PCI: Transparent bridge - 0000:00:02.0
[ 29.091042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 29.100861] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 29.101106] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 29.105717] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 29.105991] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 29.106263] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.106536] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 29.106809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 29.107082] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 29.107371] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.107645] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[ 29.107960] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 29.108022] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.108033] pnp: PnP ACPI init
[ 29.110559] pnp: PnP ACPI: found 11 devices
[ 29.110563] PnPBIOS: Disabled by ACPI PNP
[ 29.110601] PCI: Using ACPI for IRQ routing
[ 29.110604] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 29.110670] NET: Registered protocol family 8
[ 29.110671] NET: Registered protocol family 20
[ 29.111132] pnp: 00:09: ioport range 0x680-0x6ff has been reserved
[ 29.111135] pnp: 00:09: ioport range 0x295-0x296 has been reserved
[ 29.111367] PCI: Bridge: 0000:00:01.0
[ 29.111370] IO window: a000-cfff
[ 29.111375] MEM window: ff400000-ff4fffff
[ 29.111378] PREFETCH window: aeb00000-eeafffff
[ 29.111383] PCI: Bridge: 0000:00:02.0
[ 29.111386] IO window: d000-dfff
[ 29.111390] MEM window: ff500000-ff5fffff
[ 29.111394] PREFETCH window: 50000000-500fffff
[ 29.111404] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 29.111410] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 29.111434] NET: Registered protocol family 2
[ 29.151292] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 29.151442] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 29.152269] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 29.152710] TCP: Hash tables configured (established 131072 bind 65536)
[ 29.152713] TCP reno registered
[ 29.163327] checking if image is initramfs... it is
[ 29.788043] Freeing initrd memory: 6998k freed
[ 29.788420] audit: initializing netlink socket (disabled)
[ 29.788433] audit(117821035
[ 29.788488] highmem bounce pool size: 64 pages
[ 29.788539] VFS: Disk quotas dquot_6.5.1
[ 29.788554] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 29.788601] io scheduler noop registered
[ 29.788603] io scheduler anticipatory registered
[ 29.788605] io scheduler deadline registered
[ 29.788612] io scheduler cfq registered (default)
[ 29.854318] isapnp: Scanning for PnP cards...
[ 30.207291] isapnp: No Plug & Play device found
[ 30.228414] Real Time Clock Driver v1.12ac
[ 30.228451] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 30.229017] mice: PS/2 mouse device common for all mice
[ 30.229435] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 30.229657] input: Macintosh mouse button emulation as /class/input/input0
[ 30.229682] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 30.229686] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 30.229833] PNP: PS/2 Controller [PNP0303:
[ 30.232989] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 30.232994] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 30.233093] EISA: Probing bus 0 at eisa.0
[ 30.233128] EISA: Detected 0 cards.
[ 30.263159] TCP cubic registered
[ 30.263167] NET: Registered protocol family 1
[ 30.263185] Using IPI No-Shortcut mode
[ 30.263236] ACPI: (supports S0 S1 S3 S4 S5)
[ 30.263273] Magic number: 7:48:691
[ 30.263620] Freeing unused kernel memory: 328k freed
[ 30.265511] Time: tsc clocksource has been installed.
[ 30.277521] input: AT Translated Set 2 keyboard as /class/input/input1
[ 31.515025] Capability LSM initialized
[ 31.553105] ACPI Exception (acpi_processor
[ 32.081164] SCSI subsystem initialized
[ 32.106832] libata version 2.20 loaded.
[ 32.109244] ALI15X3: IDE controller at PCI slot 0000:00:0e.0
[ 32.109257] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 32.109265] ALI15X3: chipset revision 199
[ 32.109267] ALI15X3: not 100% native mode: will probe irqs later
[ 32.109281] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hdaMA, hdbMA
[ 32.109293] ALI15X3: simplex device: DMA forced
[ 32.109295] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdcMA, hddMA
[ 32.109304] Probing IDE interface ide0...
[ 32.124748] usbcore: registered new interface driver usbfs
[ 32.124768] usbcore: registered new interface driver hub
[ 32.124788] usbcore: registered new device driver usb
[ 32.125422] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 32.192239] 8139too Fast Ethernet driver 0.9.28
[ 32.438421] hda: Maxtor 33073H3, ATA DISK drive
[ 32.893723] hdb: HL-DT-ST DVDRAM GSA-4165B, ATAPI CD/DVD-ROM drive
[ 32.954410] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 32.986426] Probing IDE interface ide1...
[ 33.555584] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 33.555598] ohci_hcd 0000:00:0f.0: OHCI Host Controller
[ 33.555831] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 1
[ 33.555851] ohci_hcd 0000:00:0f.0: irq 17, io mem 0xff6fd000
[ 33.562217] hda: max request size: 128KiB
[ 33.570324] hda: 60032448 sectors (30736 MB) w/2048KiB Cache, CHS=59556/16/63, UDMA(33)
[ 33.570331] hda: cache flushes not supported
[ 33.570366] hda: hda1 hda2 hda3 <<6>usb usb1: configuration #1 chosen from 1 choice
[ 33.614463] hub 1-0:1.0: USB hub found
[ 33.614473] hub 1-0:1.0: 3 ports detected
[ 33.617709] hda5 >
[ 33.629913] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 33.629921] Uniform CD-ROM driver Revision: 3.20
[ 33.720289] ACPI: PCI Interrupt 0000:00:0f.1[b] -> GSI 21 (level, low) -> IRQ 18
[ 33.720304] ohci_hcd 0000:00:0f.1: OHCI Host Controller
[ 33.720323] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 2
[ 33.720342] ohci_hcd 0000:00:0f.1: irq 18, io mem 0xff6fc000
[ 33.782156] usb usb2: configuration #1 chosen from 1 choice
[ 33.782180] hub 2-0:1.0: USB hub found
[ 33.782189] hub 2-0:1.0: 3 ports detected
[ 33.888017] ACPI: PCI Interrupt 0000:00:0f.2[C] -> GSI 22 (level, low) -> IRQ 19
[ 33.888031] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 33.888050] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 3
[ 33.888067] ohci_hcd 0000:00:0f.2: irq 19, io mem 0xff6fb000
[ 33.949896] usb usb3: configuration #1 chosen from 1 choice
[ 33.949925] hub 3-0:1.0: USB hub found
[ 33.949934] hub 3-0:1.0: 3 ports detected
[ 34.016891] Attempting manual resume
[ 34.016895] swsusp: Resume From Partition 3:5
[ 34.016897] PM: Checking swsusp image.
[ 34.019725] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 34.041139] PM: Resume from disk failed.
[ 34.055848] ACPI: PCI Interrupt 0000:00:0f.3[D] -> GSI 23 (level, low) -> IRQ 20
[ 34.055859] ehci_hcd 0000:00:0f.3: EHCI Host Controller
[ 34.055880] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 4
[ 34.055905] ehci_hcd 0000:00:0f.3: debug port 1
[ 34.083644] ehci_hcd 0000:00:0f.3: irq 20, io mem 0xff6fe800
[ 34.083651] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 34.083744] usb usb4: configuration #1 chosen from 1 choice
[ 34.083768] hub 4-0:1.0: USB hub found
[ 34.083777] hub 4-0:1.0: 8 ports detected
[ 34.107916] kjournald starting. Commit interval 5 seconds
[ 34.107927] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.191637] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 21
[ 34.191945] eth0: RealTek RTL8139 at 0xf88dac00, 00:02:44:0d:4e:9c, IRQ 21
[ 34.191948] eth0: Identified 8139 chip type 'RTL-8139C'
[ 34.194123] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 34.194205] pata_it821x: controller in smart mode.
[ 34.194219] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 34.194232] PCI: Setting latency timer of device 0000:02:07.0 to 64
[ 34.194278] ata1: PATA max MWDMA2 cmd 0x0001dc00 ctl 0x0001d482 bmdma 0x0001d000 irq 16
[ 34.194302] ata2: PATA max MWDMA2 cmd 0x0001d400 ctl 0x0001d082 bmdma 0x0001d008 irq 16
[ 34.194317] scsi0 : pata_it821x
[ 34.758577] usb 1-2: new full speed USB device using ohci_hcd and address 3
[ 34.963321] usb 1-2: configuration #1 chosen from 1 choice
[ 34.966262] hub 1-2:1.0: USB hub found
[ 34.969238] hub 1-2:1.0: 4 ports detected
[ 35.327685] usb 1-2.1: new full speed USB device using ohci_hcd and address 4
[ 35.381787] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 35.470532] usb 1-2.1: configuration #1 chosen from 1 choice
[ 37.079170] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 37.079176] ata1.00: limiting speed to UDMA7:PIO5
[ 38.776552] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 40.465828] scsi1 : pata_it821x
[ 47.414246] eth0: link down
[ 48.802292] NET: Registered protocol family 17
[ 48.830341] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 48.830346] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
[ 48.965842] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
[ 48.965847] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
[ 48.997686] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 49.002116] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 49.114862] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 49.114913] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 49.135387] eth1: ULi M5263 at pci0000:00:0d.0, 00:13:8f:3f:9b:27, irq 22.
[ 49.290702] Linux agpgart interface v0.102 (c) Dave Jones
[ 49.292474] agpgart: Detected AGP bridge 0
[ 49.292489] Setting up ULi AGP.
[ 49.296715] agpgart: AGP aperture is 128M @ 0xf0000000
[ 49.317977] ali1563: SMBus control = 0403
[ 49.318021] ali1563_probe: Returning 0
[ 49.968402] input: PC Speaker as /class/input/input2
[ 50.263923] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 50.282961] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 18 (level, low) -> IRQ 21
[ 50.323616] drivers/
[ 50.323631] usbcore: registered new interface driver usblp
[ 50.323634] drivers/
[ 51.305072] AC'97 1 does not respond - RESET
[ 51.305543] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 51.305548] Unable to initialize codec #1
[ 51.364978] intel8x0_
[ 51.364980] intel8x0: clocking to 48000
[ 51.556378] fuse init (API version 7.
[ 51.627926] lp: driver loaded but no devices found
[ 51.660196] Adding 417648k swap on /dev/disk/
[ 51.799554] EXT3 FS on hda2, internal journal
[ 53.046700] uli526x: eth1 NIC Link is Up 100 Mbps Full duplex
[ 56.078402] No dock devices found.
[ 56.157193] ibm_acpi: ec object not found
[ 56.200455] Using specific hotkey driver
[ 56.292372] input: Power Button (FF) as /class/input/input4
[ 56.296569] ACPI: Power Button (FF) [PWRF]
[ 56.326655] input: Power Button (CM) as /class/input/input5
[ 56.330846] ACPI: Power Button (CM) [PWRB]
[ 56.430988] pcc_acpi: loading...
[ 56.691694] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
[ 56.697273] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 59.742161] NET: Registered protocol family 10
[ 59.742252] lo: Disabled Privacy Extensions
[ 59.742303] ADDRCONF(
[ 61.678452] [drm] Initialized drm 1.1.0 20060810
[ 61.693436] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 23
[ 61.696223] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 62.308157] ppdev: user-space parallel port driver
[ 63.450114] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 63.450296] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 63.450318] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[ 63.761565] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 63.761570] apm: overridden by ACPI.
[ 63.961756] Bluetooth: Core ver 2.11
[ 63.961806] NET: Registered protocol family 31
[ 63.961808] Bluetooth: HCI device and connection manager initialized
[ 63.961812] Bluetooth: HCI socket layer initialized
[ 63.994959] Bluetooth: L2CAP ver 2.8
[ 63.994963] Bluetooth: L2CAP socket layer initialized
[ 64.135497] Bluetooth: RFCOMM socket layer initialized
[ 64.135510] Bluetooth: RFCOMM TTY layer initialized
[ 64.135512] Bluetooth: RFCOMM ver 1.8
[ 75.124310] eth1: no IPv6 routers present
[ 79.808554] [drm] Setting GART location based on new memory map
[ 79.808564] [drm] Loading R300 Microcode
[ 79.808680] [drm] writeback test succeeded in 1 usecs
I booted with a Puppy-Linux CD (V. 2.13) and it loaded and configured my Raid PCI card without any problems. Here's the readout from Pupscan:
Quote:
DESCRIPTION: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be IT8212, embedded seems to be ITE8212)
VENDOR: 1283 DEVICE: 8212 KERNEL MODULE: unknown
I don't know if that helps, but I'm amazed that Puppy could correctly load something that Ubuntu could not. After all, Puppy is maintained by only a handful of people.
Changed in linux-source-2.6.20: | |
assignee: | nobody → ubuntu-kernel-team |
Can you attach the output of lspci -vnn as well?
Thanks
chuck