[ 0.000000] Linux version 2.6.24-1-generic (buildd@vernadsky) (gcc version 4.2.3 20071123 (prerelease) (Ubuntu 4.2.2-3ubuntu4)) #1 SMP Fri Dec 7 22:06:49 GMT 2007 (Ubuntu 2.6.24-1.2-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f50a0 [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6A00 checksum 0 [ 0.000000] ACPI: RSDP 000F6A00, 0014 (r0 P4M80P) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 P4M80P AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 P4M80P AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: DSDT 3FFF30C0, 311D (r1 P4M80P AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF6200, 0068 (r1 P4M80P AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=24e9f97e-cc7c-4735-82cf-8a90d4a543c7 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 3000.215 MHz processor. [ 26.952996] Console: colour VGA+ 80x25 [ 26.953000] console [tty0] enabled [ 26.953741] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 26.954318] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 26.981357] Memory: 1027832k/1048512k available (2117k kernel code, 20036k reserved, 985k data, 364k init, 131008k highmem) [ 26.981368] virtual kernel memory layout: [ 26.981369] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 26.981370] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 26.981371] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 26.981372] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 26.981373] .init : 0xc040d000 - 0xc0468000 ( 364 kB) [ 26.981374] .data : 0xc031174d - 0xc0407d64 ( 985 kB) [ 26.981375] .text : 0xc0100000 - 0xc031174d (2117 kB) [ 26.981378] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 26.981434] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 27.061396] Calibrating delay using timer specific routine.. 6008.06 BogoMIPS (lpj=12016124) [ 27.061432] Security Framework initialized [ 27.061441] SELinux: Disabled at boot. [ 27.061449] Capability LSM initialized [ 27.061462] Mount-cache hash table entries: 512 [ 27.061627] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000 [ 27.061636] monitor/mwait feature present. [ 27.061638] using mwait in idle threads. [ 27.061645] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 27.061648] CPU: L2 cache: 1024K [ 27.061651] CPU: Physical Processor ID: 0 [ 27.061653] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000 [ 27.061666] Compat vDSO mapped to ffffe000. [ 27.061685] Checking 'hlt' instruction... OK. [ 27.077836] SMP alternatives: switching to UP code [ 27.079776] Early unpacking initramfs... done [ 27.360346] ACPI: Core revision 20070126 [ 27.360400] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.390421] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 [ 27.390441] SMP alternatives: switching to SMP code [ 27.391240] Booting processor 1/1 eip 3000 [ 27.401433] Initializing CPU#1 [ 27.481022] Calibrating delay using timer specific routine.. 6000.65 BogoMIPS (lpj=12001301) [ 27.481033] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000 [ 27.481040] monitor/mwait feature present. [ 27.481047] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 27.481050] CPU: L2 cache: 1024K [ 27.481052] CPU: Physical Processor ID: 0 [ 27.481055] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000 [ 27.481433] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 [ 27.481480] Total of 2 processors activated (12008.71 BogoMIPS). [ 27.482240] ENABLING IO-APIC IRQs [ 27.482561] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 27.629034] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 27.649032] Brought up 2 CPUs [ 27.649096] CPU0 attaching sched-domain: [ 27.649100] domain 0: span 03 [ 27.649102] groups: 01 02 [ 27.649106] domain 1: span 03 [ 27.649108] groups: 03 [ 27.649111] CPU1 attaching sched-domain: [ 27.649112] domain 0: span 03 [ 27.649114] groups: 02 01 [ 27.649117] domain 1: span 03 [ 27.649119] groups: 03 [ 27.649393] net_namespace: 64 bytes [ 27.649400] Booting paravirtualized kernel on bare hardware [ 27.650036] Time: 11:16:07 Date: 12/30/07 [ 27.650098] NET: Registered protocol family 16 [ 27.650372] EISA bus registered [ 27.650379] ACPI: bus type pci registered [ 27.658443] PCI: PCI BIOS revision 2.10 entry at 0xfaf00, last bus=1 [ 27.658446] PCI: Using configuration type 1 [ 27.658448] Setting up standard PCI resources [ 27.661442] ACPI: EC: Look up EC in DSDT [ 27.664970] ACPI: Interpreter enabled [ 27.664973] ACPI: (supports S0 S1 S4 S5) [ 27.664990] ACPI: Using IOAPIC for interrupt routing [ 27.669462] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.670781] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.694668] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 27.694822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 27.694974] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) [ 27.695125] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 *12) [ 27.695255] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 27.695382] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 27.695509] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 27.695633] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 27.695818] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 [ 27.696002] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 [ 27.696204] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 27.696386] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 [ 27.696527] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.696569] pnp: PnP ACPI init [ 27.696577] ACPI: bus type pnp registered [ 27.699296] pnp: PnP ACPI: found 12 devices [ 27.699299] ACPI: ACPI bus type pnp unregistered [ 27.699304] PnPBIOS: Disabled by ACPI PNP [ 27.699574] PCI: Using ACPI for IRQ routing [ 27.699578] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.724968] NET: Registered protocol family 8 [ 27.724971] NET: Registered protocol family 20 [ 27.728817] Time: tsc clocksource has been installed. [ 27.740991] system 00:00: iomem range 0xd2000-0xd3fff has been reserved [ 27.740996] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 27.740998] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 27.741001] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 27.741004] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 27.741007] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 27.741010] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 27.741012] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 27.741015] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 27.741018] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved [ 27.741021] system 00:00: iomem range 0xfff80000-0xfffeffff could not be reserved [ 27.741029] system 00:02: ioport range 0x4000-0x407f has been reserved [ 27.741032] system 00:02: ioport range 0x40f0-0x40ff has been reserved [ 27.741034] system 00:02: ioport range 0x500-0x50f has been reserved [ 27.741041] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 27.741043] system 00:03: ioport range 0x290-0x29f has been reserved [ 27.741046] system 00:03: ioport range 0x800-0x805 has been reserved [ 27.771614] PCI: Bridge: 0000:00:01.0 [ 27.771619] IO window: a000-afff [ 27.771625] MEM window: e8000000-e9ffffff [ 27.771629] PREFETCH window: d0000000-dfffffff [ 27.771649] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 27.771662] NET: Registered protocol family 2 [ 27.808970] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 27.809343] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.810082] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 27.810761] TCP: Hash tables configured (established 131072 bind 65536) [ 27.810765] TCP reno registered [ 27.821084] checking if image is initramfs... it is [ 28.272342] Switched to high resolution mode on CPU 0 [ 28.272471] Switched to high resolution mode on CPU 1 [ 28.376723] Freeing initrd memory: 6953k freed [ 28.377707] audit: initializing netlink socket (disabled) [ 28.377726] audit(1199013367.252:1): initialized [ 28.377949] highmem bounce pool size: 64 pages [ 28.380258] VFS: Disk quotas dquot_6.5.1 [ 28.380357] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 28.380541] AppArmor: Unable to register AppArmor [ 28.380617] io scheduler noop registered [ 28.380619] io scheduler anticipatory registered [ 28.380621] io scheduler deadline registered [ 28.380634] io scheduler cfq registered (default) [ 28.380657] PCI: VIA PCI bridge detected. Disabling DAC. [ 28.380732] PCI: Bypassing VIA 8237 APIC De-Assert Message [ 28.380740] Boot video device is 0000:01:00.0 [ 28.381010] isapnp: Scanning for PnP cards... [ 28.732370] isapnp: No Plug & Play device found [ 28.768581] Real Time Clock Driver v1.12ac [ 28.768696] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.768840] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.768992] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 28.769732] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.770043] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 28.771045] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.771131] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 28.771251] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 28.771254] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 28.771387] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.785069] mice: PS/2 mouse device common for all mice [ 28.785223] EISA: Probing bus 0 at eisa.0 [ 28.785245] Cannot allocate resource for EISA slot 4 [ 28.785264] EISA: Detected 0 cards. [ 28.785268] cpuidle: using governor ladder [ 28.785270] cpuidle: using governor menu [ 28.785354] TCP cubic registered [ 28.785364] NET: Registered protocol family 1 [ 28.785399] Using IPI No-Shortcut mode [ 28.785521] Magic number: 3:178:278 [ 28.785542] hash matches device ttyy6 [ 28.785625] hash matches device tty15 [ 28.785992] Freeing unused kernel memory: 364k freed [ 28.802358] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 30.057581] fuse init (API version 7.9) [ 30.373133] SCSI subsystem initialized [ 30.427256] usbcore: registered new interface driver usbfs [ 30.427302] usbcore: registered new interface driver hub [ 30.427332] libata version 3.00 loaded. [ 30.482516] usbcore: registered new device driver usb [ 30.484177] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 30.484182] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 30.484191] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 30.484260] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [ 30.484291] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 30.484332] ACPI: PCI interrupt for device 0000:00:0f.1 disabled [ 30.487951] sata_via 0000:00:0f.0: version 2.3 [ 30.487970] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 30.488024] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 30.503902] scsi0 : sata_via [ 30.504099] USB Universal Host Controller Interface driver v3.0 [ 30.506625] scsi1 : sata_via [ 30.506684] ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc800 irq 16 [ 30.506689] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xc808 irq 16 [ 30.602282] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 30.709964] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.891021] ata1.00: HPA unlocked: 398294975 -> 398297088, native 398297088 [ 30.891032] ata1.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133 [ 30.891037] ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 30.908037] ata1.00: configured for UDMA/133 [ 31.109583] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 31.120810] scsi 0:0:0:0: Direct-Access ATA Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5 [ 31.122711] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [ 31.122719] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 31.122729] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 31.122748] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 31.123065] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 31.123108] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400 [ 31.123331] usb usb1: configuration #1 chosen from 1 choice [ 31.123371] hub 1-0:1.0: USB hub found [ 31.123380] hub 1-0:1.0: 2 ports detected [ 31.225618] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 31.225638] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 31.225676] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 31.225706] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800 [ 31.225882] usb usb2: configuration #1 chosen from 1 choice [ 31.225922] hub 2-0:1.0: USB hub found [ 31.225939] hub 2-0:1.0: 2 ports detected [ 31.329506] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 31.329529] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 31.329569] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 31.329599] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00 [ 31.329782] usb usb3: configuration #1 chosen from 1 choice [ 31.329822] hub 3-0:1.0: USB hub found [ 31.329832] hub 3-0:1.0: 2 ports detected [ 31.433441] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 31.433462] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 31.433508] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 31.433537] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000e000 [ 31.433711] usb usb4: configuration #1 chosen from 1 choice [ 31.433751] hub 4-0:1.0: USB hub found [ 31.433761] hub 4-0:1.0: 2 ports detected [ 31.466242] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 31.537760] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 31.537779] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 31.537820] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 31.537878] ehci_hcd 0000:00:10.4: irq 17, io mem 0xea000000 [ 31.548806] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 31.548813] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 31.582353] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) [ 31.582377] sd 0:0:0:0: [sda] Write Protect is off [ 31.582382] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.582413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.582490] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) [ 31.582508] sd 0:0:0:0: [sda] Write Protect is off [ 31.582512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.582543] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.582548] sda:<6>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 31.594282] usb usb5: configuration #1 chosen from 1 choice [ 31.594324] hub 5-0:1.0: USB hub found [ 31.594335] hub 5-0:1.0: 8 ports detected [ 31.605340] sda1 sda2 < sda5 > [ 31.616522] sd 0:0:0:0: [sda] Attached SCSI disk [ 31.622213] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 31.697722] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 [ 31.697728] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 31.697737] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18 [ 31.698195] eth0: VIA Rhine II at 0x1e400, 00:14:85:c4:3b:c0, IRQ 18. [ 31.698917] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1. [ 31.699107] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.1 [ 31.699126] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 31.699140] VP_IDE: not 100% native mode: will probe irqs later [ 31.699154] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 31.699171] ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio [ 31.699183] VP_IDE: IDE port disabled [ 31.699191] Probing IDE interface ide0... [ 31.996710] usb 1-1: device not accepting address 2, error -71 [ 32.280678] hdb: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive [ 32.616247] hda: SAMSUNG SV2001H, ATA DISK drive [ 32.616260] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 32.616388] hda: UDMA 5 mode selected [ 32.616496] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 32.616759] hdb: UDMA 4 mode selected [ 32.617065] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 32.626315] hda: max request size: 128KiB [ 32.628646] hda: Host Protected Area detected. [ 32.628649] current capacity is 39177839 sectors (20059 MB) [ 32.628651] native capacity is 39179952 sectors (20060 MB) [ 32.628772] hda: Host Protected Area disabled. [ 32.628777] hda: 39179952 sectors (20060 MB) w/2048KiB Cache, CHS=38869/16/63, UDMA(100) [ 32.628996] hda: cache flushes supported [ 32.629053] hda:<6>usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 34.118752] usb 4-1: configuration #1 chosen from 1 choice [ 34.359439] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 34.513311] usb 4-2: configuration #1 chosen from 1 choice [ 34.516214] hub 4-2:1.0: USB hub found [ 34.518174] hub 4-2:1.0: 4 ports detected [ 34.865952] usb 1-1: new full speed USB device using uhci_hcd and address 4 [ 35.023972] usb 1-1: configuration #1 chosen from 1 choice [ 35.231375] usb 4-2.2: new low speed USB device using uhci_hcd and address 4 [ 35.376366] usb 4-2.2: configuration #1 chosen from 1 choice [ 35.392601] usbcore: registered new interface driver hiddev [ 35.407439] input: Microsoft Microsoft Wheel Mouse OpticalŪ as /devices/pci0000:00/0000:00:10.3/usb4/4-2/4-2.2/4-2.2:1.0/input/input2 [ 35.426459] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse OpticalŪ] on usb-0000:00:10.3-2.2 [ 35.426485] usbcore: registered new interface driver usbhid [ 35.426490] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 52.609861] hda: dma_timer_expiry: dma status == 0x61 [ 62.600243] hda: DMA timeout error [ 62.600252] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } [ 62.600257] ide: failed opcode was: unknown [ 62.600363] hda: DMA disabled [ 62.600367] hdb: DMA disabled [ 62.887964] ide0: reset: success [ 62.901787] hda1 hda2 <<4>hda: dma_timer_expiry: dma status == 0x21 [ 92.870102] hda: DMA timeout error [ 92.870111] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } [ 92.870116] ide: failed opcode was: unknown [ 92.870223] hda: DMA disabled [ 93.157823] ide0: reset: success [ 93.203150] hda5 > [ 93.205754] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 93.205766] Uniform CD-ROM driver Revision: 3.20 [ 113.222508] hda: dma_timer_expiry: dma status == 0x21 [ 123.208895] hda: DMA timeout error [ 123.208904] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } [ 123.208909] ide: failed opcode was: unknown [ 123.209016] hda: DMA disabled [ 123.496615] ide0: reset: success [ 143.522337] hda: dma_timer_expiry: dma status == 0x21 [ 153.512719] hda: DMA timeout error [ 153.512728] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } [ 153.512733] ide: failed opcode was: unknown [ 153.512840] hda: DMA disabled [ 153.800440] ide0: reset: success [ 154.332524] Attempting manual resume [ 154.332529] swsusp: Resume From Partition 3:5 [ 154.332530] PM: Checking swsusp image. [ 154.357741] PM: Resume from disk failed. [ 154.406256] kjournald starting. Commit interval 5 seconds [ 154.406266] EXT3-fs: mounted filesystem with ordered data mode. [ 174.187932] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 174.484909] Linux agpgart interface v0.102 [ 174.530312] agpgart: Detected VIA VT3314 chipset [ 174.538587] agpgart: AGP aperture is 128M @ 0xe0000000 [ 174.624563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 174.748545] parport_pc 00:0a: reported by Plug and Play ACPI [ 174.748603] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 174.804509] input: Power Button (FF) as /devices/virtual/input/input4 [ 174.859246] ACPI: Power Button (FF) [PWRF] [ 174.859350] input: Power Button (CM) as /devices/virtual/input/input5 [ 174.927194] ACPI: Power Button (CM) [PWRB] [ 174.946581] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 175.013339] gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xb400, speed 1084kHz [ 175.225481] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 175.908252] Linux video capture interface: v2.00 [ 176.058263] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204 [ 176.058310] usbcore: registered new interface driver usblp [ 176.319047] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47 [ 176.321161] usb 1-1: SN9C120 PC Camera Controller detected (vid:pid 0x0C45:0x613C) [ 176.431023] usb 1-1: No supported image sensor detected for this bridge [ 176.431650] usbcore: registered new interface driver sn9c102 [ 177.194904] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 177.293348] NET: Registered protocol family 10 [ 177.293789] lo: Disabled Privacy Extensions [ 178.409344] lp0: using parport0 (interrupt-driven). [ 178.466348] Adding 859436k swap on /dev/hda5. Priority:-1 extents:1 across:859436k [ 179.138693] EXT3 FS on hda1, internal journal [ 183.882552] No dock devices found. [ 183.942339] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 186.546631] ppdev: user-space parallel port driver [ 187.356140] eth0: no IPv6 routers present [ 189.364382] [drm] Initialized drm 1.1.0 20060810 [ 189.515173] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 189.515263] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 191.035614] RPC: Registered udp transport module. [ 191.035626] RPC: Registered tcp transport module. [ 191.247590] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 192.083794] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 192.099153] NFSD: starting 90-second grace period [ 192.184549] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 192.184581] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 192.184671] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 192.591553] [drm] Setting GART location based on new memory map [ 192.591568] [drm] Loading R200 Microcode [ 192.591617] [drm] writeback test succeeded in 1 usecs [ 199.521050] Bluetooth: Core ver 2.11 [ 199.524159] NET: Registered protocol family 31 [ 199.524252] Bluetooth: HCI device and connection manager initialized [ 199.524711] Bluetooth: HCI socket layer initialized [ 199.648032] Bluetooth: L2CAP ver 2.9 [ 199.648038] Bluetooth: L2CAP socket layer initialized [ 199.674228] Bluetooth: RFCOMM socket layer initialized [ 199.674247] Bluetooth: RFCOMM TTY layer initialized [ 199.674251] Bluetooth: RFCOMM ver 1.8