[ 0.000000] Linux version 2.6.22-11-generic (buildd@rothera) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Fri Sep 7 05:07:05 GMT 2007 (Ubuntu 2.6.22-11.32-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) [ 0.000000] BIOS-e820: 000000001f6e0000 - 000000001f6eb000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f6eb000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 502MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 128736) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128736 [ 0.000000] HighMem 128736 -> 128736 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128736 [ 0.000000] On node 0 totalpages: 128736 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 973 pages used for memmap [ 0.000000] Normal zone: 123667 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F76F0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 1F6E5167, 0044 (r1 HP 09BC 6040000 LTP 0) [ 0.000000] ACPI: FACP 1F6EAE88, 0074 (r1 HP 09BC 6040000 LOHR 5F) [ 0.000000] ACPI: DSDT 1F6E5A0C, 547C (r1 HP 09BC 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 1F6FBFC0, 0040 [ 0.000000] ACPI: APIC 1F6EAEFC, 0068 (r1 HP 09BC 6040000 LOHR 5F) [ 0.000000] ACPI: BOOT 1F6EAFD8, 0028 (r1 HP 09BC 6040000 LTP 1) [ 0.000000] ACPI: MCFG 1F6EAF9C, 003C (r1 HP 09BC 6040000 LOHR 5F) [ 0.000000] ACPI: SSDT 1F6E55C3, 0235 (r1 HP 09BC 3000 INTL 20030224) [ 0.000000] ACPI: SSDT 1F6E53EB, 01D8 (r1 HP 09BC 3001 INTL 20030224) [ 0.000000] ACPI: SSDT 1F6E52D7, 0114 (r1 HP 09BC 3000 INTL 20030224) [ 0.000000] ACPI: SSDT 1F6E51AB, 012C (r1 HP 09BC 1 INTL 20030224) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) [ 0.000000] Built 1 zonelists. Total pages: 127731 [ 0.000000] Kernel command line: root=/dev/sda5 ro splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1729.609 MHz processor. [ 28.019478] Console: colour VGA+ 80x25 [ 28.022747] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 28.023035] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 28.036920] Memory: 498956k/514944k available (2016k kernel code, 15384k reserved, 918k data, 364k init, 0k highmem) [ 28.037017] virtual kernel memory layout: [ 28.037018] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 28.037020] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 28.037021] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 28.037022] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB) [ 28.037023] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 28.037025] .data : 0xc02f8366 - 0xc03ddea4 ( 918 kB) [ 28.037026] .text : 0xc0100000 - 0xc02f8366 (2016 kB) [ 28.037492] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 28.037645] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 28.117743] Calibrating delay using timer specific routine.. 3462.70 BogoMIPS (lpj=6925415) [ 28.117881] Security Framework v1.0.0 initialized [ 28.117944] SELinux: Disabled at boot. [ 28.118015] Mount-cache hash table entries: 512 [ 28.118199] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 28.118210] CPU: L1 I cache: 32K, L1 D cache: 32K [ 28.118301] CPU: L2 cache: 2048K [ 28.118357] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 [ 28.118366] Compat vDSO mapped to ffffe000. [ 28.118431] Checking 'hlt' instruction... OK. [ 28.133890] SMP alternatives: switching to UP code [ 28.134126] Freeing SMP alternatives: 11k freed [ 28.134438] Early unpacking initramfs... done [ 28.471160] ACPI: Core revision 20070126 [ 28.471289] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 28.502026] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [ 28.502168] Total of 1 processors activated (3462.70 BogoMIPS). [ 28.502416] ENABLING IO-APIC IRQs [ 28.502661] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 28.649760] Brought up 1 CPUs [ 28.649924] Booting paravirtualized kernel on bare hardware [ 28.650053] Time: 13:03:29 Date: 08/16/107 [ 28.650127] NET: Registered protocol family 16 [ 28.650262] EISA bus registered [ 28.650328] ACPI: bus type pci registered [ 28.650814] PCI: PCI BIOS revision 2.10 entry at 0xfd850, last bus=7 [ 28.650875] PCI: Using configuration type 1 [ 28.650934] Setting up standard PCI resources [ 28.660227] ACPI: EC: Look up EC in DSDT [ 28.660651] ACPI: EC: GPE=0x1b, ports=0x66, 0x62 [ 28.661618] ACPI: Interpreter enabled [ 28.661676] ACPI: (supports S0 S3 S4 S5) [ 28.661897] ACPI: Using IOAPIC for interrupt routing [ 28.666865] ACPI: EC: GPE=0x1b, ports=0x66, 0x62 [ 28.666967] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 28.667036] PCI: Probing PCI hardware (bus 00) [ 28.667703] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 28.667767] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 28.668526] PCI: Transparent bridge - 0000:00:1e.0 [ 28.668679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 28.668909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 28.669034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 28.671026] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 28.671574] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 28.672118] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 28.672616] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 28.673160] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 28.673705] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 28.674226] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 28.674722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 28.675223] Linux Plug and Play Support v0.97 (c) Adam Belay [ 28.675296] pnp: PnP ACPI init [ 28.675355] ACPI: bus type pnp registered [ 28.677281] pnp: PnP ACPI: found 8 devices [ 28.677337] ACPI: ACPI bus type pnp unregistered [ 28.677397] PnPBIOS: Disabled by ACPI PNP [ 28.677489] PCI: Using ACPI for IRQ routing [ 28.677546] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 28.677632] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 28.677696] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 28.677762] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 28.698380] NET: Registered protocol family 8 [ 28.698437] NET: Registered protocol family 20 [ 28.698544] pnp: 00:04: iomem range 0xe0000000-0xefffffff could not be reserved [ 28.698627] pnp: 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved [ 28.698710] pnp: 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved [ 28.698793] pnp: 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved [ 28.701725] Time: tsc clocksource has been installed. [ 28.729139] PCI: Bridge: 0000:00:1c.0 [ 28.729196] IO window: disabled. [ 28.729255] MEM window: disabled. [ 28.729313] PREFETCH window: disabled. [ 28.729376] PCI: Bus 7, cardbus bridge: 0000:06:06.0 [ 28.729435] IO window: 00003400-000034ff [ 28.729495] IO window: 00003800-000038ff [ 28.729556] PREFETCH window: 30000000-33ffffff [ 28.729618] MEM window: 38000000-3bffffff [ 28.729678] PCI: Bridge: 0000:00:1e.0 [ 28.729737] IO window: 3000-3fff [ 28.729795] MEM window: b0100000-b01fffff [ 28.729855] PREFETCH window: 30000000-33ffffff [ 28.729937] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 28.730053] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 28.730066] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 28.730083] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 28.730199] PCI: Setting latency timer of device 0000:06:06.0 to 64 [ 28.730212] NET: Registered protocol family 2 [ 28.769747] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 28.769844] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 28.770068] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 28.770229] TCP: Hash tables configured (established 16384 bind 16384) [ 28.770292] TCP reno registered [ 28.781826] checking if image is initramfs... it is [ 29.229696] Switched to high resolution mode on CPU 0 [ 29.440194] Freeing initrd memory: 7075k freed [ 29.440429] Simple Boot Flag at 0x36 set to 0x1 [ 29.440742] audit: initializing netlink socket (disabled) [ 29.440820] audit(1189947809.032:1): initialized [ 29.442717] VFS: Disk quotas dquot_6.5.1 [ 29.442818] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 29.442977] io scheduler noop registered [ 29.443034] io scheduler anticipatory registered [ 29.443092] io scheduler deadline registered [ 29.443161] io scheduler cfq registered (default) [ 29.443232] Boot video device is 0000:00:02.0 [ 29.443403] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 29.443455] assign_interrupt_mode Found MSI capability [ 29.443562] Allocate Port Service[0000:00:1c.0:pcie00] [ 29.443595] Allocate Port Service[0000:00:1c.0:pcie02] [ 29.443784] isapnp: Scanning for PnP cards... [ 29.797956] isapnp: No Plug & Play device found [ 29.822248] Real Time Clock Driver v1.12ac [ 29.822419] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 29.823157] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18 [ 29.823274] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 29.823859] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 29.825182] input: Macintosh mouse button emulation as /class/input/input0 [ 29.825315] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 29.831701] i8042.c: Detected active multiplexing controller, rev 1.1. [ 29.835083] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 29.835145] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 29.835206] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 29.835265] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 29.835325] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 29.835554] mice: PS/2 mouse device common for all mice [ 29.835904] EISA: Probing bus 0 at eisa.0 [ 29.835966] Cannot allocate resource for EISA slot 1 [ 29.836026] Cannot allocate resource for EISA slot 2 [ 29.836084] Cannot allocate resource for EISA slot 3 [ 29.836167] EISA: Detected 0 cards. [ 29.836320] TCP cubic registered [ 29.836390] NET: Registered protocol family 1 [ 29.836469] Using IPI No-Shortcut mode [ 29.836720] Magic number: 7:112:79 [ 29.837112] Freeing unused kernel memory: 364k freed [ 30.306388] input: AT Translated Set 2 keyboard as /class/input/input1 [ 30.705964] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 30.905885] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 31.011971] AppArmor: AppArmor initialized<5>audit(1189947810.532:2): info="AppArmor initialized" pid=1245 [ 31.019497] fuse init (API version 7.8) [ 31.024262] Failure registering capabilities with primary security module. [ 31.037935] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 2.872000] Marking TSC unstable due to: possible TSC halt in C2. [ 2.872000] ACPI: Thermal Zone [THR0] (60 C) [ 2.872000] ACPI: Invalid passive threshold [ 2.872000] ACPI: Thermal Zone [THR1] (46 C) [ 2.876000] Time: acpi_pm clocksource has been installed. [ 2.936000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 3.136000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 3.264000] usbcore: registered new interface driver usbfs [ 3.264000] usbcore: registered new interface driver hub [ 3.264000] usbcore: registered new device driver usb [ 3.268000] USB Universal Host Controller Interface driver v3.0 [ 3.268000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.268000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.268000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.268000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.268000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 [ 3.268000] usb usb1: configuration #1 chosen from 1 choice [ 3.268000] hub 1-0:1.0: USB hub found [ 3.268000] hub 1-0:1.0: 2 ports detected [ 3.372000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 3.372000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.372000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.372000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.372000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 3.372000] usb usb2: configuration #1 chosen from 1 choice [ 3.372000] hub 2-0:1.0: USB hub found [ 3.372000] hub 2-0:1.0: 2 ports detected [ 3.376000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.404000] SCSI subsystem initialized [ 3.408000] libata version 2.21 loaded. [ 3.476000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 3.476000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.476000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.476000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.476000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860 [ 3.476000] usb usb3: configuration #1 chosen from 1 choice [ 3.476000] hub 3-0:1.0: USB hub found [ 3.476000] hub 3-0:1.0: 2 ports detected [ 3.580000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 22 [ 3.580000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.580000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.580000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.580000] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880 [ 3.580000] usb usb4: configuration #1 chosen from 1 choice [ 3.580000] hub 4-0:1.0: USB hub found [ 3.580000] hub 4-0:1.0: 2 ports detected [ 3.684000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.684000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.684000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.684000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 3.684000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.684000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.684000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0040000 [ 3.688000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.688000] usb usb5: configuration #1 chosen from 1 choice [ 3.688000] hub 5-0:1.0: USB hub found [ 3.688000] hub 5-0:1.0: 8 ports detected [ 3.716000] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 3.792000] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 21 (level, low) -> IRQ 23 [ 3.840000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[b0108000-b01087ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.840000] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 3.840000] 8139cp 0000:06:07.0: Try the "8139too" driver instead. [ 3.844000] 8139too Fast Ethernet driver 0.9.28 [ 3.844000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18 [ 3.844000] eth0: RealTek RTL8139 at 0xe004a400, 00:0a:e4:d6:48:89, IRQ 18 [ 3.844000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 3.844000] ata_piix 0000:00:1f.1: version 2.11 [ 3.844000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21 [ 3.844000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 3.844000] scsi0 : ata_piix [ 3.844000] scsi1 : ata_piix [ 3.844000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14 [ 3.844000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15 [ 4.056000] Clocksource tsc unstable (delta = -371814118 ns) [ 4.396000] ata1.00: ATA-6: HTS424040M9AT00, MA2OA72A, max UDMA/100 [ 4.396000] ata1.00: 78140160 sectors, multi 16: LBA [ 4.396000] ata1.01: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2 [ 4.412000] ata1.00: configured for UDMA/100 [ 4.472000] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 4.584000] ata1.01: configured for MWDMA2 [ 4.584000] ata2: port disabled. ignoring. [ 4.584000] scsi 0:0:0:0: Direct-Access ATA HTS424040M9AT00 MA2O PQ: 0 ANSI: 5 [ 4.588000] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5 [ 4.600000] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 4.600000] sd 0:0:0:0: [sda] Write Protect is off [ 4.600000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.600000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.600000] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 4.600000] sd 0:0:0:0: [sda] Write Protect is off [ 4.600000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.600000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.600000] sda:<6>usb 2-1: configuration #1 chosen from 1 choice [ 4.948000] sda1 sda2 < sda5 sda6 sda7 sda8 > [ 5.008000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.012000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.012000] scsi 0:0:1:0: Attached scsi generic sg1 type 5 [ 5.036000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.036000] Uniform CD-ROM driver Revision: 3.20 [ 5.036000] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 5.112000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a00764b5032] [ 5.364000] Attempting manual resume [ 5.364000] swsusp: Resume From Partition 8:6 [ 5.364000] PM: Checking swsusp image. [ 5.364000] PM: Resume from disk failed. [ 5.404000] kjournald starting. Commit interval 5 seconds [ 5.404000] EXT3-fs: mounted filesystem with ordered data mode. [ 25.332000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 26.648000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 26.652000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.796000] Linux agpgart interface v0.102 (c) Dave Jones [ 26.800000] agpgart: Detected an Intel 915GM Chipset. [ 26.800000] agpgart: Detected 7932K stolen memory. [ 26.816000] agpgart: AGP aperture is 256M @ 0xc0000000 [ 27.400000] iTCO_vendor_support: vendor-support=0 [ 27.408000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 27.408000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 27.408000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 27.444000] intel_rng: FWH not detected [ 27.880000] NET: Registered protocol family 17 [ 27.896000] ieee80211_crypt: registered algorithm 'NULL' [ 27.896000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 27.896000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 27.928000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 27.932000] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 22 (level, low) -> IRQ 17 [ 28.068000] Yenta: CardBus bridge found at 0000:06:06.0 [103c:3081] [ 28.068000] Yenta: Enabling burst memory read transactions [ 28.068000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 28.068000] Yenta: Routing CardBus interrupts to PCI [ 28.068000] Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b02, devctl 0x64 [ 28.128000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 28.204000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 28.204000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 28.276000] Bluetooth: Core ver 2.11 [ 28.276000] NET: Registered protocol family 31 [ 28.276000] Bluetooth: HCI device and connection manager initialized [ 28.276000] Bluetooth: HCI socket layer initialized [ 28.300000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 [ 28.300000] Socket status: 30000006 [ 28.300000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 28.300000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 28.300000] cs: IO port probe 0x3000-0x3fff: clean. [ 28.300000] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff [ 28.300000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff [ 28.300000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 20 (level, low) -> IRQ 18 [ 28.300000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 28.528000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 28.580000] Bluetooth: HCI USB driver ver 2.9 [ 28.604000] sdhci: Secure Digital Host Controller Interface driver [ 28.604000] sdhci: Copyright(c) Pierre Ossman [ 28.604000] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0) [ 28.604000] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 22 (level, low) -> IRQ 17 [ 28.604000] mmc0: SDHCI at 0xb0109000 irq 17 DMA [ 28.608000] mmc1: SDHCI at 0xb0108c00 irq 17 DMA [ 28.608000] mmc2: SDHCI at 0xb0108800 irq 17 DMA [ 28.736000] input: PS/2 Mouse as /class/input/input2 [ 28.744000] usbcore: registered new interface driver hci_usb [ 28.756000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 29.080000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16 [ 29.080000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 29.240000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f [ 29.240000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 29.240000] cs: IO port probe 0x820-0x8ff: clean. [ 29.244000] cs: IO port probe 0xc00-0xcf7: clean. [ 29.244000] cs: IO port probe 0xa00-0xaff: clean. [ 30.008000] intel8x0_measure_ac97_clock: measured 55513 usecs [ 30.008000] intel8x0: clocking to 48000 [ 31.248000] lp: driver loaded but no devices found [ 31.384000] Adding 522072k swap on /dev/sda6. Priority:-1 extents:1 across:522072k [ 31.792000] EXT3 FS on sda5, internal journal [ 32.432000] NET: Registered protocol family 10 [ 32.432000] lo: Disabled Privacy Extensions [ 33.536000] kjournald starting. Commit interval 5 seconds [ 33.536000] EXT3 FS on sda7, internal journal [ 33.536000] EXT3-fs: mounted filesystem with ordered data mode. [ 33.568000] kjournald starting. Commit interval 5 seconds [ 33.568000] EXT3 FS on sda8, internal journal [ 33.568000] EXT3-fs: mounted filesystem with ordered data mode. [ 36.928000] ACPI: AC Adapter [AC] (on-line) [ 37.004000] ACPI: Battery Slot [BAT0] (battery present) [ 37.024000] No dock devices found. [ 37.104000] input: Power Button (FF) as /class/input/input4 [ 37.108000] ACPI: Power Button (FF) [PWRF] [ 37.152000] input: Lid Switch as /class/input/input5 [ 37.156000] ACPI: Lid Switch [LID0] [ 37.200000] input: Sleep Button (CM) as /class/input/input6 [ 37.204000] ACPI: Sleep Button (CM) [SLPB] [ 37.248000] input: Power Button (CM) as /class/input/input7 [ 37.252000] ACPI: Power Button (CM) [PWB] [ 37.376000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 39.408000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18 [ 39.408000] PCI: Setting latency timer of device 0000:00:1e.3 to 64 [ 39.800000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 42.624000] [drm] Initialized drm 1.1.0 20060810 [ 42.628000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 22 [ 42.632000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 42.868000] eth0: no IPv6 routers present [ 43.284000] ppdev: user-space parallel port driver [ 44.124000] audit(1189947852.808:3): operation="file_mmap" requested_mask="mr" denied_mask="m" name="/etc/passwd" pid=5274 profile="/usr/sbin/cupsd" [ 44.124000] audit(1189947852.808:4): operation="file_mmap" requested_mask="mr" denied_mask="m" name="/etc/group" pid=5274 profile="/usr/sbin/cupsd" [ 44.124000] audit(1189947852.808:5): operation="file_mmap" requested_mask="mr" denied_mask="m" name="/etc/group" pid=5274 profile="/usr/sbin/cupsd" [ 44.364000] audit(1189947852.808:6): operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5274 profile="/usr/sbin/cupsd" [ 44.912000] apm: BIOS not found. [ 48.064000] Failure registering capabilities with primary security module. [ 49.228000] Bluetooth: L2CAP ver 2.8 [ 49.228000] Bluetooth: L2CAP socket layer initialized [ 49.340000] Bluetooth: RFCOMM socket layer initialized [ 49.340000] Bluetooth: RFCOMM TTY layer initialized [ 49.340000] Bluetooth: RFCOMM ver 1.8 [ 137.980000] tifm_core: MMC/SD card detected in socket 0:3 [ 138.168000] mmcblk0: mmc3:0001 000000 1003520KiB [ 138.168000] mmcblk0: unknown partition table