[ 0.000000] Linux version 2.6.22-11-rt (buildd@rothera) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP PREEMPT RT Fri Sep 7 07:10:42 GMT 2007 (Unofficial) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffe2800 (usable) [ 0.000000] BIOS-e820: 000000003ffe2800 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262114) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262114 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262114 [ 0.000000] On node 0 totalpages: 262114 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4040 pages, LIFO batch:0 [ 0.000000] Normal zone: 3080 pages used for memmap [ 0.000000] Normal zone: 222200 pages, LIFO batch:31 [ 0.000000] HighMem zone: 447 pages used for memmap [ 0.000000] HighMem zone: 32291 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FDE50, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 000FDE64, 0028 (r1 DELL CPi R 27D2020D ASL 61) [ 0.000000] ACPI: FACP 000FDE90, 0074 (r1 DELL CPi R 27D2020D ASL 61) [ 0.000000] ACPI: DSDT FFFE4000, 317F (r1 INT430 SYSFexxx 1001 MSFT 100000D) [ 0.000000] ACPI: FACS 3FFFF800, 0040 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000) [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists. Total pages: 258531 [ 0.000000] Kernel command line: root=UUID=ccde07f6-47b5-4523-94d6-339e8b19e91a ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (01e16000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] WARNING: experimental RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 996.818 MHz processor. [ 11.410033] Console: colour VGA+ 80x25 [ 11.411222] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 11.413101] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 11.508942] Memory: 1021820k/1048456k available (2052k kernel code, 25932k reserved, 969k data, 364k init, 130952k highmem) [ 11.508967] virtual kernel memory layout: [ 11.508969] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 11.508973] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 11.508976] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 11.508978] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 11.508981] .init : 0xc03f9000 - 0xc0454000 ( 364 kB) [ 11.508984] .data : 0xc030134c - 0xc03f3ae4 ( 969 kB) [ 11.508987] .text : 0xc0100000 - 0xc030134c (2052 kB) [ 11.508994] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 11.569264] Calibrating delay using timer specific routine.. 1994.40 BogoMIPS (lpj=997202) [ 11.569361] Security Framework v1.0.0 initialized [ 11.569383] SELinux: Disabled at boot. [ 11.569426] Mount-cache hash table entries: 512 [ 11.569755] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 11.569779] CPU: L1 I cache: 16K, L1 D cache: 16K [ 11.569785] CPU: L2 cache: 512K [ 11.569792] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 11.569813] Compat vDSO mapped to ffffe000. [ 11.569842] Checking 'hlt' instruction... OK. [ 11.573406] SMP alternatives: switching to UP code [ 11.573632] Freeing SMP alternatives: 9k freed [ 11.574109] Early unpacking initramfs... done [ 12.194652] ACPI: Core revision 20070126 [ 12.210302] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 12.242797] ACPI: setting ELCR to 0200 (from 0800) [ 14.147665] CPU0: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01 [ 14.147678] SMP motherboard not detected. [ 14.147684] Local APIC not detected. Using dummy APIC emulation. [ 14.148536] Brought up 1 CPUs [ 14.148826] Booting paravirtualized kernel on bare hardware [ 14.148956] Time: 10:12:50 Date: 08/16/107 [ 14.149023] NET: Registered protocol family 16 [ 14.149314] EISA bus registered [ 14.149333] ACPI: bus type pci registered [ 14.172193] PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2 [ 14.172199] PCI: Using configuration type 1 [ 14.172203] Setting up standard PCI resources [ 14.183235] ACPI: EC: Look up EC in DSDT [ 14.224715] ACPI: Interpreter enabled [ 14.224723] ACPI: (supports S0 S1 S3 S4 S5) [ 14.224761] ACPI: Using PIC for interrupt routing [ 14.302435] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.302468] PCI: Probing PCI hardware (bus 00) [ 14.302863] Force enabled HPET at base address 0xfed00000 [ 14.302876] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 14.302883] PCI quirk: region 0880-08bf claimed by ICH4 GPIO [ 14.303439] PCI: Transparent bridge - 0000:00:1e.0 [ 14.303668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.303846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 14.303887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 14.418002] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 14.418464] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 14.418920] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 14.419401] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 14.419722] ACPI: Power Resource [PADA] (on) [ 14.419738] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.419762] pnp: PnP ACPI init [ 14.419782] ACPI: bus type pnp registered [ 14.612986] pnp: PnP ACPI: found 16 devices [ 14.612993] ACPI: ACPI bus type pnp unregistered [ 14.613003] PnPBIOS: Disabled by ACPI PNP [ 14.613155] PCI: Using ACPI for IRQ routing [ 14.613162] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.617783] NET: Registered protocol family 8 [ 14.617789] NET: Registered protocol family 20 [ 14.618042] hpet clockevent registered [ 14.618052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 14.618061] hpet0: 3 64-bit timers, 14318180 Hz [ 14.619256] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved [ 14.619264] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 14.619270] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 14.619277] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 14.619291] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 14.619297] pnp: 00:02: ioport range 0x800-0x805 has been reserved [ 14.619304] pnp: 00:02: ioport range 0x808-0x80f has been reserved [ 14.619315] pnp: 00:03: ioport range 0x806-0x807 has been reserved [ 14.619321] pnp: 00:03: ioport range 0x810-0x85f has been reserved [ 14.619327] pnp: 00:03: ioport range 0x860-0x87f has been reserved [ 14.619334] pnp: 00:03: ioport range 0x880-0x8bf has been reserved [ 14.619340] pnp: 00:03: ioport range 0x8c0-0x8df has been reserved [ 14.619346] pnp: 00:03: ioport range 0x8e0-0x8ff has been reserved [ 14.619360] pnp: 00:08: ioport range 0x900-0x91f has been reserved [ 14.619370] pnp: 00:08: ioport range 0x3f0-0x3f1 has been reserved [ 14.619387] pnp: 00:0f: iomem range 0xfebffc00-0xfebfffff has been reserved [ 14.650235] PCI: Bridge: 0000:00:01.0 [ 14.650241] IO window: c000-cfff [ 14.650248] MEM window: fc000000-fdffffff [ 14.650254] PREFETCH window: e0000000-e7ffffff [ 14.650274] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 14.650279] IO window: 0000e000-0000e0ff [ 14.650285] IO window: 0000e400-0000e4ff [ 14.650292] PREFETCH window: 50000000-53ffffff [ 14.650299] MEM window: f4000000-f7ffffff [ 14.650305] PCI: Bus 7, cardbus bridge: 0000:02:01.1 [ 14.650310] IO window: 0000e800-0000e8ff [ 14.650316] IO window: 0000f000-0000f0ff [ 14.650322] PREFETCH window: 54000000-57ffffff [ 14.650329] MEM window: 5c000000-5fffffff [ 14.650335] PCI: Bridge: 0000:00:1e.0 [ 14.650340] IO window: e000-ffff [ 14.650347] MEM window: f4000000-fbffffff [ 14.650354] PREFETCH window: 50000000-59ffffff [ 14.650375] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 14.650395] PCI: Enabling device 0000:02:01.0 (0000 -> 0003) [ 14.651073] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 14.651080] PCI: setting IRQ 11 as level-triggered [ 14.651087] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 14.651108] PCI: Enabling device 0000:02:01.1 (0000 -> 0003) [ 14.651115] ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 14.651170] NET: Registered protocol family 2 [ 14.657127] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.657375] TCP established hash table entries: 65536 (order: 9, 2883584 bytes) [ 14.671226] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 14.682862] TCP: Hash tables configured (established 65536 bind 65536) [ 14.682881] TCP reno registered [ 14.684395] checking if image is initramfs... it is [ 15.851441] Freeing initrd memory: 6769k freed [ 15.852538] audit: initializing netlink socket (disabled) [ 15.852578] audit(1189937569.137:1): initialized [ 15.852797] highmem bounce pool size: 64 pages [ 15.853004] VFS: Disk quotas dquot_6.5.1 [ 15.853077] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 15.853203] io scheduler noop registered [ 15.853209] io scheduler anticipatory registered [ 15.853213] io scheduler deadline registered [ 15.853237] io scheduler cfq registered (default) [ 15.853312] Boot video device is 0000:01:00.0 [ 15.853864] isapnp: Scanning for PnP cards... [ 16.209391] isapnp: No Plug & Play device found [ 16.275489] Real Time Clock Driver v1.12ac [ 16.275773] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.275913] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.276269] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 16.277431] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.278574] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 16.278585] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 16.278602] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 16.280156] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.280470] input: Macintosh mouse button emulation as /class/input/input0 [ 16.280675] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 16.285666] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.285799] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.286145] mice: PS/2 mouse device common for all mice [ 16.286421] EISA: Probing bus 0 at eisa.0 [ 16.286458] EISA: Detected 0 cards. [ 16.286633] TCP cubic registered [ 16.286652] NET: Registered protocol family 1 [ 16.286691] Using IPI No-Shortcut mode [ 16.287140] Magic number: 7:447:224 [ 16.287203] hash matches device ttyu8 [ 16.287220] hash matches device ttyrb [ 16.287923] Freeing unused kernel memory: 364k freed [ 16.289677] input: AT Translated Set 2 keyboard as /class/input/input1 [ 17.756667] fuse init (API version 7.8) [ 17.770264] Capability LSM initialized [ 17.793320] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 17.812763] ACPI: Thermal Zone [THM] (42 C) [ 19.771053] usbcore: registered new interface driver usbfs [ 19.771105] usbcore: registered new interface driver hub [ 19.779771] Floppy drive(s): fd0 is 1.44M [ 19.779849] usbcore: registered new device driver usb [ 19.806553] FDC 0 is a post-1991 82077 [ 19.873268] SCSI subsystem initialized [ 19.891653] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 19.891665] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 19.891681] 3c59x: Donald Becker and others. [ 19.891691] 0000:02:00.0: 3Com PCI 3c905C Tornado at f8824c00. [ 19.895599] USB Universal Host Controller Interface driver v3.0 [ 19.902191] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 19.902202] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 19.902226] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 19.902233] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 19.903072] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 19.906664] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 [ 19.907517] usb usb1: configuration #1 chosen from 1 choice [ 19.907813] hub 1-0:1.0: USB hub found [ 19.907841] hub 1-0:1.0: 2 ports detected [ 19.935543] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 19.935566] 0000:02:08.0: 3Com PCI 3c905C Tornado at f8848800. [ 19.936737] libata version 2.21 loaded. [ 20.009345] ata_piix 0000:00:1f.1: version 2.11 [ 20.009372] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 20.009389] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 20.009453] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 20.009722] scsi0 : ata_piix [ 20.009831] scsi1 : ata_piix [ 20.012826] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 20.012834] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 20.167012] ata1.00: ATA-6: HTS721080G9AT00, MC4OA51A, max UDMA/100 [ 20.167021] ata1.00: 156301488 sectors, multi 8: LBA48 [ 20.173008] ata1.00: configured for UDMA/100 [ 20.323844] scsi 0:0:0:0: Direct-Access ATA HTS721080G9AT00 MC4O PQ: 0 ANSI: 5 [ 20.324606] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 20.324629] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 20.324637] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 20.324915] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 20.324950] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 [ 20.325689] usb usb2: configuration #1 chosen from 1 choice [ 20.325984] hub 2-0:1.0: USB hub found [ 20.326001] hub 2-0:1.0: 2 ports detected [ 20.429564] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 20.429588] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 20.429595] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 20.429922] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 20.429956] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 [ 20.430736] usb usb3: configuration #1 chosen from 1 choice [ 20.431056] hub 3-0:1.0: USB hub found [ 20.431072] hub 3-0:1.0: 2 ports detected [ 20.582230] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 20.582271] sd 0:0:0:0: [sda] Write Protect is off [ 20.582278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.582813] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.583214] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 20.583320] sd 0:0:0:0: [sda] Write Protect is off [ 20.583327] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.583559] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.583568] sda: sda1 sda2 < sda5 > [ 20.626590] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.671398] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.737528] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 20.876017] usb 3-2: configuration #1 chosen from 1 choice [ 20.877935] hub 3-2:1.0: USB hub found [ 20.880846] hub 3-2:1.0: 4 ports detected [ 20.945220] Attempting manual resume [ 20.945227] swsusp: Resume From Partition 8:5 [ 20.945231] PM: Checking swsusp image. [ 20.945539] PM: Resume from disk failed. [ 21.004442] kjournald starting. Commit interval 5 seconds [ 21.004488] EXT3-fs: mounted filesystem with ordered data mode. [ 21.163712] usb 3-2.1: new low speed USB device using uhci_hcd and address 3 [ 21.344799] usb 3-2.1: configuration #1 chosen from 1 choice [ 21.524547] usb 3-2.2: new full speed USB device using uhci_hcd and address 4 [ 21.637672] usb 3-2.2: configuration #1 chosen from 1 choice [ 21.641529] hub 3-2.2:1.0: USB hub found [ 21.644472] hub 3-2.2:1.0: 4 ports detected [ 21.934359] usb 3-2.3: new low speed USB device using uhci_hcd and address 5 [ 22.070497] usb 3-2.3: configuration #1 chosen from 1 choice [ 28.417914] eth1: setting full-duplex. [ 28.422327] eth0: setting half-duplex. [ 30.436975] NET: Registered protocol family 17 [ 32.467435] input: PC Speaker as /class/input/input2 [ 33.059222] Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0 [ 33.059235] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 33.099333] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 33.151120] Linux agpgart interface v0.102 (c) Dave Jones [ 33.160624] intel_rng: FWH not detected [ 33.273514] agpgart: Detected an Intel 830M Chipset. [ 33.353925] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.369208] iTCO_vendor_support: vendor-support=0 [ 33.496669] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 33.497126] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860) [ 33.497180] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 33.589749] agpgart: AGP aperture is 256M @ 0xd0000000 [ 33.589903] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.111879] parport_pc 00:0e: reported by Plug and Play ACPI [ 35.127685] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 35.396910] irda_init() [ 35.396954] NET: Registered protocol family 23 [ 35.651853] found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252 [ 35.669901] smsc_ircc_present: can't get sir_base of 0x2f8 [ 35.691399] Yenta: CardBus bridge found at 0000:02:01.0 [1028:00e3] [ 35.691423] Yenta: Using CSCINT to route CSC interrupts to PCI [ 35.691428] Yenta: Routing CardBus interrupts to PCI [ 35.691435] Yenta TI: socket 0000:02:01.0, mfunc 0x01261222, devctl 0x64 [ 35.914348] Yenta: ISA IRQ mask 0x0438, PCI irq 11 [ 35.914358] Socket status: 30000006 [ 35.914367] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff [ 35.914374] cs: IO port probe 0xe000-0xffff: clean. [ 35.915382] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff [ 35.915389] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x59ffffff [ 35.916308] Yenta: CardBus bridge found at 0000:02:01.1 [1028:00e3] [ 35.916327] Yenta: Using CSCINT to route CSC interrupts to PCI [ 35.916331] Yenta: Routing CardBus interrupts to PCI [ 35.916339] Yenta TI: socket 0000:02:01.1, mfunc 0x01261222, devctl 0x64 [ 36.078630] usbcore: registered new interface driver hiddev [ 36.139324] Yenta: ISA IRQ mask 0x0438, PCI irq 11 [ 36.139332] Socket status: 30000006 [ 36.139341] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff [ 36.139348] cs: IO port probe 0xe000-0xffff: clean. [ 36.140344] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff [ 36.140351] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x59ffffff [ 36.239242] input: Logitech Logitech USB Keyboard as /class/input/input4 [ 36.239703] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2.1 [ 36.322829] input: Logitech Logitech USB Keyboard as /class/input/input5 [ 36.323167] input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2.1 [ 36.352202] input: Logitech Logitech USB Keyboard as /class/input/input6 [ 36.352694] input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2.1 [ 36.743183] hiddev96: USB HID v1.10 Device [Samsung Electronics Sam Sung Electronics] on usb-0000:00:1d.2-2.3 [ 36.743224] usbcore: registered new interface driver usbhid [ 36.743233] /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-rt/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 36.779666] usbcore: registered new interface driver xpad [ 36.779677] /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-rt/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 36.897816] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 36.897851] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 37.037543] cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 [ 37.039320] cs: IO port probe 0x3e0-0x4ff: clean. [ 37.039930] cs: IO port probe 0x820-0x8ff: clean. [ 37.040011] cs: IO port probe 0xc00-0xcf7: clean. [ 37.040548] cs: IO port probe 0xa00-0xaff: clean. [ 37.041322] cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 [ 37.044682] cs: IO port probe 0x3e0-0x4ff: clean. [ 37.048306] cs: IO port probe 0x820-0x8ff: clean. [ 37.048392] cs: IO port probe 0xc00-0xcf7: clean. [ 37.049149] cs: IO port probe 0xa00-0xaff: clean. [ 37.644662] intel8x0_measure_ac97_clock: measured 50437 usecs [ 37.644671] intel8x0: clocking to 48000 [ 37.975503] lp0: using parport0 (interrupt-driven). [ 38.045824] IBM TrackPoint firmware: 0x0b, buttons: 2/3 [ 38.073071] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [ 38.253165] input: TPPS/2 IBM TrackPoint as /class/input/input7 [ 71.400290] NET: Registered protocol family 10 [ 71.400443] lo: Disabled Privacy Extensions [ 71.400558] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 82.055339] eth1: no IPv6 routers present [ 241.058302] EXT3 FS on sda1, internal journal [ 246.883467] ACPI: Battery Slot [BAT0] (battery present) [ 246.988051] ACPI: Battery Slot [BAT1] (battery present) [ 247.216735] input: Lid Switch as /class/input/input8 [ 247.217142] ACPI: Lid Switch [LID] [ 247.217773] input: Power Button (CM) as /class/input/input9 [ 247.218147] ACPI: Power Button (CM) [PBTN] [ 247.218788] input: Sleep Button (CM) as /class/input/input10 [ 247.219180] ACPI: Sleep Button (CM) [SBTN] [ 247.427884] ACPI: AC Adapter [AC] (on-line) [ 247.653050] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 247.693044] ACPI: ACPI Dock Station Driver [ 248.271053] speedstep: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of 500000 nSec. [ 250.475167] ppdev: user-space parallel port driver [ 251.472181] [drm] Initialized drm 1.1.0 20060810 [ 251.486225] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 251.486236] apm: overridden by ACPI. [ 251.519187] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 251.522112] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 252.326811] Capability LSM initialized [ 252.745630] Bluetooth: Core ver 2.11 [ 252.745749] NET: Registered protocol family 31 [ 252.745754] Bluetooth: HCI device and connection manager initialized [ 252.745761] Bluetooth: HCI socket layer initialized [ 252.805402] Bluetooth: L2CAP ver 2.8 [ 252.805413] Bluetooth: L2CAP socket layer initialized [ 252.852696] Bluetooth: RFCOMM socket layer initialized [ 252.852727] Bluetooth: RFCOMM TTY layer initialized [ 252.852732] Bluetooth: RFCOMM ver 1.8 [ 345.664861] Marking TSC unstable due to: cpufreq changes. [ 346.096926] Clocksource tsc unstable (delta = -115359983 ns)