uname -a Linux ubuntu 2.6.26-4-generic #1 SMP Mon Jul 14 18:39:53 UTC 2008 i686 GNU/Linux lspci-vvnn.log 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Gateway 2000 Device [107b:0366] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) Subsystem: Gateway 2000 Device [107b:0366] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 2, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0300c Data: 41b9 Capabilities: [90] Subsystem: Gateway 2000 Device [107b:0366] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0300c Data: 41c1 Capabilities: [90] Subsystem: Gateway 2000 Device [107b:0366] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) Subsystem: Gateway 2000 Device [107b:0366] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Gateway 2000 Device [107b:0366] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Gateway 2000 Device [107b:0366] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Gateway 2000 Device [107b:0366] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 41c9 Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting Kernel driver in use: sky2 Kernel modules: sky2 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [140] Device Serial Number b8-18-89-ff-ff-de-18-00 Kernel driver in use: iwl3945 Kernel modules: iwl3945 04:09.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] Subsystem: Gateway 2000 Device [107b:0366] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 04:09.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10) Subsystem: Gateway 2000 Device [107b:0366] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259728 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259728 [ 0.000000] On node 0 totalpages: 259728 [ 0.000000] DMA zone: 36 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4060 pages, LIFO batch:0 [ 0.000000] Normal zone: 1980 pages used for memmap [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 267 pages used for memmap [ 0.000000] HighMem zone: 30085 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F6600, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3F692A1B, 0040 (r1 GATEWA SYSTEM 20070418 LTP 0) [ 0.000000] ACPI: FACP 3F698E20, 0074 (r1 GATEWA SYSTEM 20070418 LOHR 5A) [ 0.000000] ACPI: DSDT 3F693409, 5A17 (r1 GATEWA SYSTEM 20070418 MSFT 100000E) [ 0.000000] ACPI: FACS 3F699FC0, 0040 [ 0.000000] ACPI: APIC 3F698E94, 0068 (r1 GATEWA SYSTEM 20070418 LOHR 5A) [ 0.000000] ACPI: HPET 3F698EFC, 0038 (r1 GATEWA SYSTEM 20070418 LOHR 5A) [ 0.000000] ACPI: MCFG 3F698F34, 003C (r1 GATEWA SYSTEM 20070418 LOHR 5A) [ 0.000000] ACPI: APIC 3F698F70, 0068 (r1 GATEWA SYSTEM 20070418 LTP 0) [ 0.000000] ACPI: BOOT 3F698FD8, 0028 (r1 GATEWA SYSTEM 20070418 LTP 1) [ 0.000000] ACPI: SSDT 3F692A5B, 04EA (r1 GATEWA SYSTEM 3000 INTL 20050228) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 41000 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257445 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- debian-installer/language=fr console-setup/layoutcode=ca [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1596.539 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1015664k/1038912k available (2460k kernel code, 22564k reserved, 1113k data, 368k init, 121408k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc74000 - 0xfffff000 (3628 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc0485000 - 0xc04e1000 ( 368 kB) [ 0.004000] .data : 0xc03670f6 - 0xc047d540 (1113 kB) [ 0.004000] .text : 0xc0100000 - 0xc03670f6 (2460 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.083942] Calibrating delay using timer specific routine.. 3197.18 BogoMIPS (lpj=6394363) [ 0.083958] Security Framework initialized [ 0.083963] SELinux: Disabled at boot. [ 0.083979] AppArmor: AppArmor initialized [ 0.083984] AppArmor: Registered secondary security module capability [ 0.083986] Capability LSM initialized as secondary [ 0.083993] Mount-cache hash table entries: 512 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys memory [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 2048K [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] CPU: Processor Core ID: 0 [ 0.084005] using mwait in idle threads. [ 0.084005] Checking 'hlt' instruction... OK. [ 0.100006] ACPI: Core revision 20080321 [ 0.112007] ENABLING IO-APIC IRQs [ 0.112007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.151719] CPU0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06 [ 0.152009] Booting processor 1/1 ip 6000 [ 0.160010] Initializing CPU#1 [ 0.160010] Calibrating delay using timer specific routine.. 3192.94 BogoMIPS (lpj=6385891) [ 0.160010] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.160010] CPU: L2 cache: 2048K [ 0.160010] CPU: Physical Processor ID: 0 [ 0.160010] CPU: Processor Core ID: 1 [ 0.240015] CPU1: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06 [ 0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.244015] Brought up 2 CPUs [ 0.244015] Total of 2 processors activated (6390.12 BogoMIPS). [ 0.244015] CPU0 attaching sched-domain: [ 0.244015] domain 0: span 0-1 [ 0.244015] groups: 0 1 [ 0.244015] CPU1 attaching sched-domain: [ 0.244015] domain 0: span 0-1 [ 0.244015] groups: 1 0 [ 0.244015] net_namespace: 660 bytes [ 0.244015] Booting paravirtualized kernel on bare hardware [ 0.244015] NET: Registered protocol family 16 [ 0.244015] EISA bus registered [ 0.244015] ACPI: bus type pci registered [ 0.244015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.244015] PCI: MCFG area at e0000000 reserved in E820 [ 0.244015] PCI: Using MMCONFIG for extended config space [ 0.244015] PCI: Using configuration type 1 for base access [ 0.244015] Setting up standard PCI resources [ 0.244888] ACPI: EC: Look up EC in DSDT [ 0.248140] ACPI: Interpreter enabled [ 0.248144] ACPI: (supports S0 S3 S4 S5) [ 0.248159] ACPI: Using IOAPIC for interrupt routing [ 0.252015] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.252015] ACPI: EC: GPE storm detected, disabling EC GPE [ 0.416026] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.416026] ACPI: EC: driver started in poll mode [ 0.416026] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.416026] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.416026] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.416026] PCI: Transparent bridge - 0000:00:1e.0 [ 0.416026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.416026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.416026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.416207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.420026] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.420026] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.420026] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.420026] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.420026] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.420156] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.420283] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.420408] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.424026] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.424026] pnp: PnP ACPI init [ 0.424026] ACPI: bus type pnp registered [ 0.489052] pnp: PnP ACPI: found 9 devices [ 0.489052] ACPI: ACPI bus type pnp unregistered [ 0.489052] PnPBIOS: Disabled by ACPI PNP [ 0.489052] PCI: Using ACPI for IRQ routing [ 0.494240] NET: Registered protocol family 8 [ 0.494243] NET: Registered protocol family 20 [ 0.497052] NetLabel: Initializing [ 0.497052] NetLabel: domain hash size = 128 [ 0.497052] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.497052] NetLabel: unlabeled traffic allowed by default [ 0.497052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.497052] hpet0: 3 64-bit timers, 14318180 Hz [ 0.497052] AppArmor: AppArmor Filesystem Enabled [ 0.497052] ACPI: RTC can wake from S4 [ 0.503904] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.503908] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.503911] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.503914] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 0.503917] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.503921] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.503924] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.503932] system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved [ 0.503939] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.503942] system 00:05: ioport range 0x1000-0x107f has been reserved [ 0.503945] system 00:05: ioport range 0x1180-0x11bf has been reserved [ 0.503948] system 00:05: ioport range 0x1640-0x164f has been reserved [ 0.503951] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 0.503954] system 00:05: iomem range 0xff000000-0xffffffff could not be reserved [ 0.506679] Switched to high resolution mode on CPU 1 [ 0.508411] Switched to high resolution mode on CPU 0 [ 0.534024] PCI: region 0000:04:09.0/9 too large: 0x0000000000000000-0x0000000003ffffff [ 0.534024] PCI: Bridge: 0000:00:1c.0 [ 0.534024] IO window: 2000-2fff [ 0.534024] MEM window: 0xd4000000-0xd5ffffff [ 0.534024] PREFETCH window: 0x00000000d0000000-0x00000000d1ffffff [ 0.534024] PCI: Bridge: 0000:00:1c.1 [ 0.534024] IO window: 3000-3fff [ 0.534024] MEM window: 0xd6000000-0xd7ffffff [ 0.534024] PREFETCH window: 0x00000000d2000000-0x00000000d3ffffff [ 0.534024] PCI: Bus 5, cardbus bridge: 0000:04:09.0 [ 0.534024] IO window: 0x00004000-0x000040ff [ 0.534024] IO window: 0x00004400-0x000044ff [ 0.534024] MEM window: 0x50000000-0x53ffffff [ 0.534024] PCI: Bridge: 0000:00:1e.0 [ 0.534024] IO window: 4000-4fff [ 0.534024] MEM window: 0xd8000000-0xd80fffff [ 0.534024] PREFETCH window: disabled. [ 0.534024] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.534024] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.534024] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.534024] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.534024] pci 0000:00:1e.0: enabling device (0004 -> 0007) [ 0.534024] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.534024] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.534024] NET: Registered protocol family 2 [ 0.554042] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.554259] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.554700] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.554931] TCP: Hash tables configured (established 131072 bind 65536) [ 0.554934] TCP reno registered [ 0.558059] NET: Registered protocol family 1 [ 0.558176] checking if image is initramfs... it is [ 1.421036] Freeing initrd memory: 7978k freed [ 1.425028] Simple Boot Flag at 0x36 set to 0x1 [ 1.429029] audit: initializing netlink socket (disabled) [ 1.429029] type=2000 audit(1217173656.416:1): initialized [ 1.437029] highmem bounce pool size: 64 pages [ 1.437029] Total HugeTLB memory allocated, 0 [ 1.437029] VFS: Disk quotas dquot_6.5.1 [ 1.437029] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.437029] msgmni has been set to 1762 [ 1.437029] io scheduler noop registered [ 1.437029] io scheduler anticipatory registered [ 1.437029] io scheduler deadline registered [ 1.437029] io scheduler cfq registered (default) [ 1.437029] pci 0000:00:02.0: Boot video device [ 1.437030] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.437030] assign_interrupt_mode Found MSI capability [ 1.437030] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.437030] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.437030] Allocate Port Service[0000:00:1c.0:pcie03] [ 1.437030] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.437030] assign_interrupt_mode Found MSI capability [ 1.437030] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.437030] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.437030] Allocate Port Service[0000:00:1c.1:pcie03] [ 1.437115] isapnp: Scanning for PnP cards... [ 1.793702] isapnp: No Plug & Play device found [ 1.820293] hpet_resources: 0xfed00000 is busy [ 1.820293] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.824293] brd: module loaded [ 1.824293] input: Macintosh mouse button emulation as /class/input/input0 [ 1.824293] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2P] at 0x60,0x64 irq 1,12 [ 1.825193] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.825199] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.828291] mice: PS/2 mouse device common for all mice [ 1.828291] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.828291] rtc0: alarms up to one month, y3k [ 1.828291] EISA: Probing bus 0 at eisa.0 [ 1.828291] Cannot allocate resource for EISA slot 1 [ 1.828291] Cannot allocate resource for EISA slot 2 [ 1.828291] Cannot allocate resource for EISA slot 3 [ 1.828291] Cannot allocate resource for EISA slot 4 [ 1.828291] EISA: Detected 0 cards. [ 1.828291] cpuidle: using governor ladder [ 1.828291] cpuidle: using governor menu [ 1.828291] aufs 20080609 [ 1.828291] Using IPI No-Shortcut mode [ 1.828292] registered taskstats version 1 [ 1.828292] rtc_cmos 00:06: setting system clock to 2008-07-27 15:47:37 UTC (1217173657) [ 1.828292] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.828292] EDD information not available. [ 1.828292] Freeing unused kernel memory: 368k freed [ 1.859586] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.993807] fuse init (API version 7.9) [ 2.009807] uvesafb: failed to execute /sbin/v86d [ 2.009807] uvesafb: make sure that the v86d helper is installed and executable [ 2.009807] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 2.009807] uvesafb: vbe_init() failed with -22 [ 2.009807] uvesafb: probe of uvesafb.0 failed with error -22 [ 2.094143] ACPI: SSDT 3F693196, 01EA (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 2.094563] ACPI: SSDT 3F692F45, 01CC (r1 PmRef Cpu0Cst 3001 INTL 20050228) [ 2.097807] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.097807] ACPI: ACPI0007:00 is registered as cooling_device0 [ 2.097807] ACPI: SSDT 3F693380, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 2.097807] ACPI: SSDT 3F693111, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228) [ 2.097807] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.097807] ACPI: ACPI0007:01 is registered as cooling_device1 [ 2.109812] Marking TSC unstable due to: TSC halts in idle. [ 2.281831] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 2.464949] ACPI: Thermal Zone [TZ00] (59 C) [ 3.081172] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.081172] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 3.081172] sky2 0000:02:00.0: v1.21 addr 0xd4000000 irq 16 Yukon-FE (0xb7) rev 1 [ 3.081172] sky2 eth0: addr 00:e0:b8:ae:e2:b9 [ 3.117069] usbcore: registered new interface driver usbfs [ 3.117095] usbcore: registered new interface driver hub [ 3.124970] usbcore: registered new device driver usb [ 3.124970] USB Universal Host Controller Interface driver v3.0 [ 3.124970] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.124970] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.124970] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.124970] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.124970] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 3.125035] usb usb1: configuration #1 chosen from 1 choice [ 3.125067] hub 1-0:1.0: USB hub found [ 3.125074] hub 1-0:1.0: 2 ports detected [ 3.175338] No dock devices found. [ 3.191090] SCSI subsystem initialized [ 3.224566] libata version 3.00 loaded. [ 3.236351] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 3.236351] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.236351] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.236351] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.236351] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 3.236351] usb usb2: configuration #1 chosen from 1 choice [ 3.236351] hub 2-0:1.0: USB hub found [ 3.236351] hub 2-0:1.0: 2 ports detected [ 3.338252] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.338264] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.338268] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.338295] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.338332] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 3.338424] usb usb3: configuration #1 chosen from 1 choice [ 3.338455] hub 3-0:1.0: USB hub found [ 3.338462] hub 3-0:1.0: 2 ports detected [ 3.446220] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 3.446220] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.446220] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.446220] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.446220] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 3.446220] usb usb4: configuration #1 chosen from 1 choice [ 3.446220] hub 4-0:1.0: USB hub found [ 3.446220] hub 4-0:1.0: 2 ports detected [ 3.525988] Clocksource tsc unstable (delta = -251166994 ns) [ 3.547405] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.547405] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.547405] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.547405] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 3.553494] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.553494] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.553494] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8444000 [ 3.570429] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.570517] usb usb5: configuration #1 chosen from 1 choice [ 3.570550] hub 5-0:1.0: USB hub found [ 3.570559] hub 5-0:1.0: 8 ports detected [ 3.672443] ohci1394 0000:04:09.1: enabling device (0000 -> 0002) [ 3.672452] ACPI: PCI Interrupt 0000:04:09.1[B] -> GSI 18 (level, low) -> IRQ 18 [ 3.672463] PCI: Setting latency timer of device 0000:04:09.1 to 64 [ 3.673532] ahci 0000:00:1f.2: version 3.0 [ 3.673532] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 3.721345] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[d8005000-d80057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.677451] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [ 4.677460] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 4.677470] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.678864] scsi0 : ahci [ 4.678864] scsi1 : ahci [ 4.678864] scsi2 : ahci [ 4.678864] scsi3 : ahci [ 4.678864] ata1: SATA max UDMA/133 abar m1024@0xd8444400 port 0xd8444500 irq 220 [ 4.678864] ata2: DUMMY [ 4.678864] ata3: SATA max UDMA/133 abar m1024@0xd8444400 port 0xd8444600 irq 220 [ 4.678864] ata4: DUMMY [ 4.993209] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0b8036603c9e4] [ 5.001300] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.001300] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 5.366670] ata1.00: ATA-7: WDC WD1200BEVS-22LAT0, 01.06M01, max UDMA/133 [ 5.366670] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 1) [ 5.367356] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 5.367438] ata1.00: configured for UDMA/133 [ 5.690607] ata3: SATA link down (SStatus 0 SControl 300) [ 5.690578] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5 [ 5.690700] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 5.690734] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 5.690749] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 5.695422] ata_piix 0000:00:1f.1: version 2.12 [ 5.695422] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 5.695422] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 5.695422] scsi4 : ata_piix [ 5.695422] scsi5 : ata_piix [ 5.695422] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 5.695422] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 5.705789] Driver 'sd' needs updating - please use bus_type methods [ 5.705789] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 5.705789] sd 0:0:0:0: [sda] Write Protect is off [ 5.705789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.705789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.705789] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 5.705789] sd 0:0:0:0: [sda] Write Protect is off [ 5.705789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.705789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.705789] sda: sda1 sda2 sda3 sda4 [ 5.819737] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.826449] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.860439] ata5.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AX03, max UDMA/33 [ 5.876245] ata5.00: configured for UDMA/33 [ 5.876292] ata6: port disabled. ignoring. [ 5.877020] scsi 4:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AX03 PQ: 0 ANSI: 5 [ 5.877122] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 5.886660] Driver 'sr' needs updating - please use bus_type methods [ 5.896409] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray [ 5.896409] Uniform CD-ROM driver Revision: 3.20 [ 5.896409] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 6.743277] kjournald starting. Commit interval 5 seconds [ 6.743277] EXT3-fs: mounted filesystem with ordered data mode. [ 7.817078] kjournald starting. Commit interval 5 seconds [ 7.819084] EXT3-fs: mounted filesystem with ordered data mode. [ 8.258550] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8.302515] ISO 9660 Extensions: RRIP_1991A [ 8.563968] loop: module loaded [ 8.827044] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 82.606456] udevd version 124 started [ 85.152381] Linux agpgart interface v0.103 [ 85.235696] iTCO_vendor_support: vendor-support=0 [ 85.260714] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 85.260803] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 85.260837] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 85.334153] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 85.510153] input: Power Button (FF) as /class/input/input2 [ 85.554355] ACPI: Power Button (FF) [PWRF] [ 85.554462] input: Power Button (CM) as /class/input/input3 [ 85.623772] ACPI: Power Button (CM) [PWRB] [ 85.623850] input: Sleep Button (CM) as /class/input/input4 [ 85.672937] ACPI: Sleep Button (CM) [SLPB] [ 85.673044] input: Lid Switch as /class/input/input5 [ 85.720904] ACPI: Lid Switch [LID] [ 85.774371] agpgart: Detected an Intel 945GM Chipset. [ 85.775003] agpgart: Detected 7932K stolen memory. [ 85.791294] agpgart: AGP aperture is 256M @ 0xc0000000 [ 86.004680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 86.071570] intel_rng: FWH not detected [ 86.214759] tifm_7xx1 0000:04:09.2: enabling device (0000 -> 0002) [ 86.214759] ACPI: PCI Interrupt 0000:04:09.2[A] -> GSI 17 (level, low) -> IRQ 17 [ 86.214759] PCI: Setting latency timer of device 0000:04:09.2 to 64 [ 86.366598] Yenta: CardBus bridge found at 0000:04:09.0 [107b:0366] [ 86.366598] PCI: Bus 5, cardbus bridge: 0000:04:09.0 [ 86.366598] IO window: 0x00004000-0x000040ff [ 86.366598] IO window: 0x00004400-0x000044ff [ 86.366598] PREFETCH window: 0x54400000-0x547fffff [ 86.366598] MEM window: 0x50000000-0x53ffffff [ 86.366598] Yenta: Using CSCINT to route CSC interrupts to PCI [ 86.366598] Yenta: Routing CardBus interrupts to PCI [ 86.366598] Yenta TI: socket 0000:04:09.0, mfunc 0x01ac1b22, devctl 0x64 [ 86.599834] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 [ 86.599840] Socket status: 30000006 [ 86.599843] Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08 [ 86.599849] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 86.599852] cs: IO port probe 0x4000-0x4fff: clean. [ 86.600242] pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xd80fffff [ 86.887985] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 86.887985] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 86.887985] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 86.887985] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 86.887985] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 86.927988] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 86.931999] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 86.998448] input: PC Speaker as /class/input/input6 [ 87.050694] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008 [ 87.084062] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 87.319117] cs: IO port probe 0x100-0x3af: clean. [ 87.319117] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 87.319117] cs: IO port probe 0x820-0x8ff: clean. [ 87.319117] cs: IO port probe 0xc00-0xcf7: clean. [ 87.319990] cs: IO port probe 0xa00-0xaff: clean. [ 87.957106] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 88.151003] ACPI: Battery Slot [BAT1] (battery present) [ 88.201366] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 88.201366] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 88.223041] ACPI: AC Adapter [ACAD] (off-line) [ 88.223460] input: Video Bus as /class/input/input8 [ 88.256959] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 88.257752] input: Video Bus as /class/input/input9 [ 88.320947] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 89.581518] Adding 714884k swap on /dev/sda4. Priority:-1 extents:1 across:714884k [ 90.371842] ip_tables: (C) 2000-2006 Netfilter Core Team [ 93.157378] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 96.857837] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 97.044466] apm: BIOS not found. [ 97.405504] lp: driver loaded but no devices found [ 97.522706] ppdev: user-space parallel port driver [ 103.952879] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 103.953056] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106) [ 103.954360] firmware: requesting iwlwifi-3945-1.ucode [ 104.213711] Registered led device: iwl-phy0:radio [ 104.219105] Registered led device: iwl-phy0:assoc [ 104.219105] Registered led device: iwl-phy0:RX [ 104.219105] Registered led device: iwl-phy0:TX [ 104.613178] Bluetooth: Core ver 2.11 [ 104.614725] NET: Registered protocol family 31 [ 104.614734] Bluetooth: HCI device and connection manager initialized [ 104.614741] Bluetooth: HCI socket layer initialized [ 104.700674] Bluetooth: L2CAP ver 2.9 [ 104.700674] Bluetooth: L2CAP socket layer initialized [ 104.838592] Bluetooth: RFCOMM socket layer initialized [ 104.838614] Bluetooth: RFCOMM TTY layer initialized [ 104.838622] Bluetooth: RFCOMM ver 1.8 [ 106.471724] sky2 eth0: enabling interface [ 114.705617] [drm] Initialized drm 1.1.0 20060810 [ 114.781467] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 114.781467] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 114.781467] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 131.373688] NET: Registered protocol family 10 [ 131.376280] lo: Disabled Privacy Extensions [ 131.376280] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 131.376280] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 173.184251] CPU0 attaching NULL sched-domain. [ 173.184261] CPU1 attaching NULL sched-domain. [ 173.215595] CPU0 attaching sched-domain: [ 173.219519] domain 0: span 0-1 [ 173.219519] groups: 0 1 [ 173.219519] domain 1: span 0-1 [ 173.219519] groups: 0-1 [ 173.219519] CPU1 attaching sched-domain: [ 173.219519] domain 0: span 0-1 [ 173.219519] groups: 1 0 [ 173.219519] domain 1: span 0-1 [ 173.219519] groups: 0-1 [ 372.142173] NET: Registered protocol family 17 [ 374.000753] wlan0: Initial auth_alg=0 [ 374.000753] wlan0: authenticate with AP 00:1a:70:e9:c8:b9 [ 374.001820] wlan0: RX authentication from 00:1a:70:e9:c8:b9 (alg=0 transaction=2 status=0) [ 374.001820] wlan0: authenticated [ 374.001820] wlan0: associate with AP 00:1a:70:e9:c8:b9 [ 374.004465] wlan0: RX AssocResp from 00:1a:70:e9:c8:b9 (capab=0x411 status=0 aid=2) [ 374.004465] wlan0: associated [ 374.004465] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 375.310564] padlock: VIA PadLock not detected. [ 392.646198] wlan0: no IPv6 routers present [ 407.895987] kjournald starting. Commit interval 5 seconds [ 407.896071] EXT3 FS on sda3, internal journal [ 407.896071] EXT3-fs: mounted filesystem with ordered data mode.